QT Pro 7 - Not exporting MP3 from ANY format.

Here are links to images showing the problem.
http://t3st.com/qt/QT_exportscreen.jpg
http://t3st.com/qt/QT_errorscreen.jpg
When I try to export anything, I repeat ANYTHING as an MP3 I get an error screen. (mov, avi, mp4, aif, etc..)
I noticed that my export to MP3 options are a little slim. Ideas?
For now taking the files and opening them in iTunes to convert works, but I'd rather not have to hack things to make them work.
Thanks.

You appear to be using a third-party plug-in or codec to enable the MP3 export since to the best of my knowledge Apple doesn't supply an MP3 codec with QuickTime. The only Apple-supplied solution is iTunes.
Perhaps you need to go back to the third-party solution provider or to the customer support area for that particular product. If it's unsupported open source or freeware then you may be out of luck, but it could be useful if you identified the source of your MP3 codec.

Similar Messages

My lightroom 5.5 will not export jpg or any other type of photo from the original RAW/NEF uncompressed file. I get a message saying there is a Win 32 "file missing." I unistalled 5.5 and reinstalled 5.4 and it works fine. What to do? Anyone else have

LRoom 5.5 does not export files under any circumstances. I've chosen different locations; putting it in Lightroom NEF to JPG, putting it in another program, same conversion.
I get a "win 32 file missing.....". I did not copy that message as it was not complete. I uninstalled 5.5 and reinstalled 5.4 and it works just fine. I didn't notice any difference to begin with. Minor fixes for a few cameras and lenses.
Not being able to export is a SERIOUS problem and its not with my computer. If it worked for the last 3 years, it must be with 5.5.
Any ideas? Thanks for you input and help. Also, how does one get Adobe to interact directly with its customers rather than having the blind leading the blind??
Thanks

99.9% (estimated) of Lr5.5 users are not having the problem you are (can't export).
That said, for this type of problem, you may want to consider Adobe technical support instead of the forum - I prefer chatting..
If you want some advice from a fellow blind user: try renaming your preferences file (and all other Lr data files if preference file doesn't make a difference, try a new catalog if still no luck). If still the same error, consider posting the rest of that error message - it could be you just need another "win 32" file not being installed by Lr installer, but without knowing the filename, it's kinda hard to say.........
Preference and other file locations in Lightroom 5
PS - the logic: "no problem til Lr5.5, so Lr5.5 code at fault" sounds good on the surface, but is surprisingly flawed - perhaps you should consider yourself lucky the other versions worked despite the potential for problem, rather than considering yourself unlucky that you got nailed when upgrading to Lr5.5 .
Don't shoot the messenger ,
Rob

TS1647 My Macbook Pro will not print anything from any program. I've reinstalled the drivers. I get an error message in Word that says, "Word could not communicate with printer." Any ideas?

My Macbook Pro will not print anything from any program. I've reinstalled the drivers. I get an error message in Word that says, "Word could not communicate with printer." Any ideas?

Be sure to try restarting, if you have not done so since this problem occurred. You should also power off the printer while you do the restart...
If that does not help, you can try resetting the printing system. Open System Preferences Print & Scan (or Print & Fax) pane. In the sidebar with list of printers, right (control) click anywhere. Select Reset printing system. You will have to add back your printers after you do this.

HP pavilion g6 do not boot nothing from any media

Hi, I have this notebook (HP Pavilion g6-1010sc) and one day it do not boot nothing from any media.
I tried to boot linux, winxp, original win7-x64 from internal and external USB disks, but unfortunatelly.
Notebook restarts or freezes after i tried to boot OS. Start of booting OS is correct, in original win7 it asked to run system normally or launch system repair. After i choose normal startup, its normally starting and only one point of WIN7 loading logo is shown and after this freezes.
When I run win7 installation from USB HDD or launch system repair, windows loaded files correctly, but after this, system restarts and capslocks LED blink two or three times and notebook startup again.
I have on second USB HDD linux ubuntu, which work on every computer correctly, but on this computer it freezes after small time.
I tested Back Track5 from DVD and during boot notebook restarts after one minute too.
I have tried to remove original HDD and try boot other USB HDD/DVD too, but no change. I tried other memory modules, but no change too.
System diagnostics of RAM and HDD is correct and no problem found.
Original bios on this notebook was F6.A and I tried older version F53 and only one change is, that in booting is shown more piece of WIN7 boot logo, and again freezes.
I tried disable automatic restart after system failure, but notebook it does not react on this, when it want to restart or freeze, it does it
Sorry for my english

No, i do not think, that I have UEFI bios. After I pres ESC and after F2 or directly after turn on press F2, my diagnostic menu looks as this:
This diagnostic tool is stored on HDD, when I removed HDD, this tool can not to run.
(By the way, tests will be passed.)
And original system is WIN7x64 and on support page is only this system and cannot be selected other operating systems, e.g. WIN8, which fully supports UEFI.
This reply is no solution for me. I tested internal HDD in different computer and it is 100% correct, and RAM i tried to change with other 100% correct modules as I wrote on last post and no change.
This means, that RAM and HDD is correct. I want to know, whether is error in notebook's mainboard or bios or some different.
I think, I am not first with such problem, and I do not want know solution only, but I want also know reason.
Thanks for reply, but it is no solution for this problem, and is outside.

TS1702 This app will not be deleted from any iOS device that synchronizes with your iTunes library.

How do you remove an app from your iPad? I have synced the iPad and attempted to remove and this is the messgae I receive:
This app will not be deleted from any iOS device that synchronizes with your iTunes library.
HELP! Get rid of these Doodle Gods, Kick the Buddy, etc....

As Jim states, that procedure deletes the app and its associated documents from the device itself. At next sync, the deletion should propagate and get rid of the backup on iTunes as well.
If not, you can also manually delete that backup. Go into iTunes on the computer you sync the iPad with. If needed, select Show Sidebar in the View menu. Choose Apps under Library in the sidebar. Click on the All tab in the middle of the window. Scroll about till you locate the offending app amongst the bunch of icons. Right-click or Control-click on it and choose Delete from the popup menu. If the app is gone already on the device, there should be no warnings. You should delete from the device first and sync, so this manual step becomes unnecessary.

Hi, I' ll be San Antonio from 8-10th of Oct and want to buy an iphone 5. According to forums there is no unlucked yet. Thus, can i get simlocked but not contracted phone from any store? and is that possible to use that phone in Turkey without any prob.

Hi, I' ll be San Antonio from 8-10th of Oct and want to buy an iphone 5. According to forums there is no unlucked yet. Thus, can i get simlocked but not contracted phone from any store? and is that possible to use that phone in Turkey without any prob.

If you purchase the phone at the full contract price and have no term left on your carrier contract, the carrier will unlock it for you. That's what I am doing with AT&T. I'll pay the full purchase price for the phone and since I don't have a contract with them, they will unlock it for you. It can be difficult to get it done since most of their customer service is very ill informed but I have had many discussions with them on their chat that I have records of them stating they will unlock any phone if you do not have an existing contract. It's the law.

IPad 2 will not send email from any app except from my actual email app

IPad 2 will not send email from any app (eg camara, pdf edit apps, evernote ect.) except from my actual email app. It will send email from my email account in the mail app or online. Pls help :-/

I had this problem
I hit the power button and the round button at the same time and held it until it rebooted
You get the black screen and the apple logo
When that was done I want to the app and update screen and I was able to update my apps
I suggest when you update stay on that screen until they all update
I find it sometimes get stuck updating when I leave the screen as they are updating and do other things, but I could be wrong. It just seems to me that is when it happens.
The reboot works and don't worry you don't lose anything when u reboot it's like shutting down a computer and powering it back up. Everything you had before will still be there.

QT Pro - WHY will it not export as a different format?

Loaded up a Photo-JPEG file into Quicktime player.
It came off a Mac, so I need it as a 10 bit BlackMagic file.
Problem - Quicktime will not export the blasted thing.
It just sits there, on 0%, doing absolutely nothing.
What am I doing wrong?
The file plays in QT Pro, yet it refuses to export a single frame.
This has - so far - been an appalling waste of money, as it simply refuses to even work most of the time.

Sounds like something is wrong with the QuickTime install or it may be permissions related to the directory you're reading from or exporting to.
I don't have any problems exporting to any format in my version 7 Pro on a PC.
You would probably want to export to DV Stream (.dv) or to AVI using DV codec. These files should be viewable in your PC software.
PHOTO-JPEG is a very old dependable codec that works on Mac's and PC's.
To "test" your Pro install you should make a ten second Image Sequence file and try exporting it to .dv or .avi (with DV codec).

Can not export data from form tracker

Hi there,
I have set up a lovely form for collecting data. It all comes into the Adobe Tracker and the Responses file fine.
What i wish to do is export data from the responses file into another format. I should be able to do it from the Export button on the left but it is 'blanked out' and does nothing if I push it. I can't find any details on here or the internet relating to this. And yes, there is data in the file to export .
Hoping you can help.
Many thanks in advance.

I have the same problem but... I created two forms for two separate purposes and have had responses to both.
One of them allows me to export the data and the other does not.
Does anyone out there have an answer for this seemingly random anomoly?
Regards
Sydman

Does Premiere Pro CC export omf from multicam sequences?

I've got an hour long multicam sequence already cut and ready for OMFs to be exported when I realized that CS6 does not export the "inside" of the multicam audio clip (which is basically a nested clip). I've already edited the sequence to picture lock so there are many, many, many cuts (not just video, but also audio) so it's not as simple as unnest an audio clip - I would have to unnest ALL the multicam audio clip per cut (and there are a lot of cuts). Is there any way possible to work around this debacle? Does the new Premiere Pro CC fix this problem? From what I've researched, there isn't any proof in writing or from anyone's experience. For the future, I now know I have to unnest the audio before I go do any multclipping session, but for now - I need the quickest workaround and my fear is that I may have to just go to every audio clip and unnest...
I've tried doing the Audition workaround, but that simply creates an OMF of the nest itself and not what is inside the nest which holds audio for two separate people. Using the Audition workaround basically merges the first person's audio resulting in the second person to be completely gone.
Any thoughts?

Hi yfury,
In Premiere Pro CC, you can flatten your multi-cam sequence and then export an OMF from there. Right-click > MultCamera > Flatten.
More info: http://adobe.ly/13WkFZ2
Thanks,
Kevin

Macbook Pro not transferring files from my old Macbook's g-drive that used Snow Leopard...I need help!!

I just bought a macbook pro yesterday (13 inch) from the Apple Store due to my old 2007 macbook (the 13 inch white one) running slow because of the applications I used. I transferred the old files, and backed all of them up on the 500gb G-Drive external hard drive using time share. I gave the computer to a friend of a friend and no longer have it. When I first turned the new computer on, it gave me the option to restore using a back up disk, like my g drive from timeshare. I chose that and it said it had worked fine. But when I got to the home screen, I couldn't find any of my files. The old computer didn't have lion, it was operating on Snow Leopard. I am trying to figure out how to get my files to show up on my new computer. When I click on my g-drive on my desktop, I see my backups, but all of the folders have the red circle with the negative sign in the middle. I was told to go to disk utility, click on the g-drive and click repair disk, so I did. Still, no progress. I tried using migration assistant and my g-drive wasn't showing, the only icon it showed was the Macintosh HD with the timeshare symbol laying on top of it, I tried doing it that way, again, didn't work. I know how to use a mac, but as far as the technical side, I am truly a beginner. I don't know what to do. I talked to 3 different people from Apple Pro Care over the phone yesterday and they were just as confused as I was. One of them told me that Lion doesn't have Rosetta Stone, so Snow Leopard files cannot transfer into Lion...is this true? I looked up my permissions on my old macbook settings and it said "No" on allowing permissions. If I was told to change it to yes, I would have done that before I gave the computer away. I was on the new computer for over 6 hours yesterday trying to recover my files, still nothing. Can anyone please help?!?! I am really frustrated and lost, any assistance would be greatly appreciated...THANK YOU in advance!!

oops, time machine, not timeshare, lol

Mac Pro doesn't boot from any media

Hi,
We have a Dual Xeon Mac Pro that has been running fine since 2007 the person that uses it reported that it started making loud banging noises (how loud I do not know as thats quite subjective although it was loud enough to warrant other people in the office going to see what the noise was) and then the desktop crashed and now when it boots we get the folder with a flashing question mark.
I've put it down to disk failure but due to them having a Mac Pro (intel) and a Dual G5 PowerMac I think at some point in time they binned off one set of disks believing that one set would work for both machines resulting in none of the disks they have will boot the machine.
Oddly I haven't been able to boot it from any other media though, I downloaded the live version of Ubuntu for Netbooks to try to get it to boot from that but it wouldn't boot from that either and when I put it in selective startup mode it detects the CD in the drive as Windows.
So here I am with a Mac Pro an old G4 Mirror Doors era Apple Keyboard, no media that will boot the thing for diagnostics and wondering what my next move is. Back in the day when I admin'd a network of Mac's it'd be selective boot from a firewire drive try a repair do some cloning if required slap a new disk in reimage and off we go.
I haven't actively worked on a day to day basis on Apple kit for about 4 years though so I'm a bit rusty and have no experience with the Intel Architecture Macs other than my Mum and Dads iMac and MacBook and I'm pretty sure the media that came with them wont boot the Mac Pro, different media sets never used to work across ranges, not sure how true that is now though.
Any help with this much appreciated. Stats below
Sean

I had a quote from the local Apple Service Centre and Media for this machine was £70.
Luckily we found the Media for the Mac Pro inside a box for some other software.
I have since been able to retrieve the data by inserting the disk into a SATA equipped G5 and using disk utility on that machine to repair the volume and disk.
I've retrieved the data and the disk, volume and permissions structures all check out.
However the Intel Mac Pro will not boot from the now repaired drive, or from the original DVD shipped with the computer.
So off to the Apple Service Centre it goes for hardware diagnosis. I expect this to be expensive
Cheers
Sean

Premiere Pro not Exporting to Adobe Media Encoder

Never had this problem before on a Mac. Now using a Windows 7 Machine.
Intel Xeon CPU E5-2630 v3 @2.40 (2 processors)
64 GB Ram
Nividia Quadro K4200 v. 2.1.2
Trying to export a Premiere Pro sequence to Media Encoder for encoding. Nothing pops up in AME. And if I try to add the sequence from within AME, doesn't work either. Exporting directly from Premiere DOES work though. Any ideas?

This was my first video in Premiere Pro CS4.
Information Hard Disk #1 :
Manufacturer :
Seagate
Model :
ST3500418AS
Serial Number :
5VMFTSYR
Revision (Firmware) :
CC38
Family :
Seagate Barracuda 7200.12 family
Serial ATA :
Yes
Serial ATA Version :
2.0 - (SATA-300)
Support :
ATA8-ACS
Size :
500GB
Solid State Disk (SSD) :
No
Speed :
7200 rpm
Cache :
16 384KB
Information Hard Disk #2 :
Model :
MAXTOR STM3320620AS
Serial Number :
6QF4Z8WZ
Revision (Firmware) :
3.AAE
Family :
Seagate Maxtor DiamondMax 21
Serial ATA :
Yes
Serial ATA Version :
1.0 - (SATA-150)
Support :
ATA/ATAPI-7
Size :
320GB
Cache :
16 384KB
ECC Size :
4
Multiple Sector :
16
Thanks for your reply

Design View Not Displaying Pages with any Formatting

I asked this question in another thread and somebody locked it. The question is not answered. My Design view is not displaying my files with any formatting. I can view them in a browser, but not in Design view where I can see my work as I'm working. While I can upload files to the remote server (host provider) the links got screwed up so files on the remote server don't show any formatting either. Every link, thousands of links, are off by one word (folder) from where my site was residing on my hard drive. When I try to make a change to the links manually then I can no longer view them with any formatting in my own browser either.
On my local broswer on my PC the address line reads: http://localhost/folderNameIneedToDelete/filename.php
On the live website (for my homepage) the address line reads http://websiteName.com/folderNameIneedToDelete/index.html
(Here is the text from another thread that was improperly locked)
I just added a remote server to my site so I could begin uploading files to my host provider. When I saved the setup I saw a message popup about the cache changing. Now when I try to view a file in Dreamweaver in Design View it doesn't recognize any of the external style sheets. It displays with no formating.
I can still view the pages in a browser and they look appropriate, just not in Design View where I can continue working on the site as I've been doing.
How do I get Design View to display my pages properly again using the .css pages that apply to each page design?
Thanks,
Robert

Murray, thanks for all your assistance.
Before I edit thousands of links again I want to confirm I've interpreted all your info correctly. If I setup everything as follows all my pages should work in Design View, browsers accessed from the "Preview/Debug in browser" icon in Dreamweaver and most importantly in a live environment at a host provider:
Site Setup
Site - Site Name: anything including spaces
Site - Local Site Folder: C:\wamp\www\rootfoldername\
Servers - Testing Server (Testing: checked)
Server Name: Testing Server
Connect Using: Local/Network
Server Folder: C:\wamp\www\rootfoldername\
Web URL: http://localhost/rootfoldername/
Remote Server - Maintain synmchronization information: checked
Remote Server - Automatically upload files to server on Save: unchecked
Remote Server - Enable file check-out: unchecked
Testing Server - Server Model: PHP My SQL
Version Control - Access: None
Advanced Settings - Local Info - Default Images Folder: C:\wamp\www\rootfoldername\_images\
Advanced Settings - Local Info - Links relative to: Document
Advanced Settings - Local Info - Web URL: http://sitename.com/
Advanced Settings - Local Info - Case-sensitive links checking: unchecked
Advanced Settings - Local Info - Enable Cache: checked
Advanced Settings - Cloaking - Enable Cloaking: checked
Cloak files ending with: unchecked
Advanced Settings - Design Notes - Maintain Design Notes: checked
Advanced Settings - Design Notes - Enable Upload Design Notes for Sharing: unchecked
Advanced Settings - File View Columns - Name: Built In - Show
Advanced Settings - File View Columns - Notes: Built In - Hide
Advanced Settings - File View Columns - Size: Built In - Show
Advanced Settings - File View Columns - Type: Built In - Show
Advanced Settings - File View Columns - Modified: Built In - Show
Advanced Settings - File View Columns - Checked Out By: Built In - Show
Advanced Settings - Contribute - Enable Contribute compatibility: unchecked
Advanced Settings - Templates - Don't rewrite relative document paths: checked
Advanced Settings - Spry - Asset Folder: C:\wamp\www\rootfoldername\SpryAssets\
Site File Structure - place files in the following folders:
C:\wamp\www\rootfoldername
webpages (html & php)
_images - [folder] (there are numerous image folders beginning with _images) containing .jpg and .png files
_includes - [folder] containing attached .php files for the header, navigation and footer attached to every page
_scripts - [folder] containing .js script files
_styles - [folder] containing .css files (external style sheets)
Connections - [folder] contains one php file (databasename.php)
SpryAssets - [folder] containing system generated .js files .css files and .gif files
ZendFramework - [folder] - I have no idea if the files in this folder are necesary and why it was placed here many months ago
** Links **
Remove the leading / from every link in every file
HTML5 shiv
using an external link will always reflect the latest changes(Question) - If I link to this .js file externally at google instead of linking to a current copy in my _script folder could future changes to this external .js file cause future problems with the webpages that have this file attached?
Remote Server
Setup a remote server using the ftp address settings provided by the host provider. (Question) Any settings defined for the future Remote Server (the first remote server was deleted when problems occured) will not cause any harm to anything involving the Testing Server such as viewing webpages in Design View, browsers accessed from the "Preview/Debug in browser" icon in Dreamweaver and will not cause any harm to any files eventually put to the host provider via that future Remote Server. Is that correct?
Murray, thanks again for your help,
Robert

Poor quality exported pictures on any format

i've an issue when exporting my 10 mp jpg to any format (this is not a jpg export issue, exporting to dng and tiff is bad too...)
when exporting any pics taken with my canon g7, the result is strange. There is an echo on each picture (this issue is present with or without tweaking the picture).i always export and reduce pictures to 800x600 max. I think it is a lightroom issue because exporting the same picture with psp 4.12(!) don't do this, but looks less sharpen. Is there an optimisation always "on" with lightroom exporting module?
I'm very disapointed about this issue. I'm still using psp to export my pics...
Here is two examples:
Lightroom export 1:1:
http://img259.imageshack.us/img259/6697/img1548lrhm5.jpg
Lightroom export 1:1 then zoom x2:
http://img259.imageshack.us/img259/6444/img1548lrzoomx2vp1.jpg
Psp4 export 1:1
http://img259.imageshack.us/img259/4209/img1548pspvq1.jpg
Psp4 export 1:1 then zoom x2:
http://img243.imageshack.us/img243/416/img1548pspzoomx2nt5.jpg
what's wrong with LR?

I also believe it's the firmware.
I've had my N95 for little over a week, and I've taken about 100 pictures of my car with it (crazy paint so trying to capture the true effect is hard). It came with version 10.xx.xx of the firmware
Of these 100 or so (108 to be precise) which seemed picture perfect (no pun intended) on the screen, approximately 80 of them were either overexposed or out of focus, despite predominantly having green brackets.
I've just updated my firmware to version 12.xx.xx and initial results seem very positive, the camera seems much more effective and focussing seems much better after 5 quick snaps.
Another thing to bear in mind, which I've read quite a lot of times (not only here I hasten to add), that updating the firmware doesn't work the first time, and people have had to reinstall it several times before getting the desired operation.
I was reluctant to update mine as it was locked to orange, but the phone was becoming increasingly "crashy" with resets being needed 3 or 4 times a day, calls being dropped and the phone crashing mid-call, and various lock ups when navigating the menu systems. I decided that I'd rather risk a potential nulling of the warranty and have a phone that worked better and so unlocked the phone myself (brilliant, easy and takes no more than 5 minutes I might add!) and I'm now on the latest firmware. Seems great so far but I've got copies of previous versions should they be required.
Anyway I digress, the firmware seems to have given a marked improvement in the cameras performance, but I'll continue my snapping through the day to confirm this and get back to you with my results.Message Edited by skyline_stu on 04-Aug-200705:20 AM
Nokia N95 and a Nissan Skyline GTR, my two favourite gadgets

QT Pro 7 - Not exporting MP3 from ANY format.

Similar Messages

Maybe you are looking for