QT Pro in XP Pro

I have Quick Time Pro on my windows XP Pro....can the pro version be updated with no additional cost?

QuickTime upgrades do not change Pro status unless your move to a higher version number.
QuickTime 7 keys will continue to work until you install version 8 (not yet released).

Similar Messages

Can't Get MacBook Pro and Mac Pro to Network

I have a MacBook Pro (2008 - 2.5 Ghz. Core 2 Duo with 4 Gb of RAM running OS X 10.6.7) that I have been connecting to my Mac Pro (2005 - 2 2.66 Ghz Xeon with 20 Gb of RAM running OS X 10.6.7) through an Ethernet switch on my school's network. This has worked without a hitch for years, but when I upgraded to 10.6.7 recently, the MacBook and Mac Pro fail to network. On the MacBook Pro, the Mac Pro's icon doesn't show in the shared area, and on the Mac Pro, I can see the icon for the MacBook Pro, but when I click on the icon to connect, I get the message that "Connection Failed There was an error connecting to the server (name of my MacBook Pro). Check the server name or IP address, and then try again." I have tried a direct connect using the "Connect to Server" under the Go menu on both machines, using their IP addresses, but no luck. Is there something I need to re-set to get these two to talk again? I have other Macs on the same network that my MacBook and my Mac Pro can see, and both machines can connect to them. They just can't connect to each other.
Thanks in advance for any ideas you might have on how to fix this.

I fixed the problem by re-setting the default values for my VirusBarrier X6 anti-virus program.

Officejet Pro 8600 - Macbook Pro and Macbook Air will not print

Products:
HP Officejet Pro 8600
Macbook Pro (Mac OS X, Version 10.7.5)
Macbook Air (OS X, Version 10.8.2)
Question:
Why did my Macs initially print fine, but now will not print at all?
Full Story:
I have a wireless network at my house that consisted of a 30mb cable internet, Netgear 900n, HP Officejet Pro 8600, 2 Dell Laptops with Windows 7, a Lenovo Laptop with Windows 7, and Dell Tower with Windows 7 - All printed just fine.
The HP Officejet 8600 was added to my network about 2 months ago.
I added a Macbook Pro and a Macbook Air about 3 weeks ago. Both Macs printed just fine for about a week. Then suddenly they stopped. I spent about 2 hours on the phone with HP Service, and they finally said it must be my router. So I called Netgear. Netgear was useless! They wanted me to agree to charges for services before they would even discuss the issue.
Due to information provided by HP's service support, and because Netgear will not support their product, I promptly purchased a new router - an Apple Airport Extreme.
The Macs recognize the printer, will print if hardwired via a USB cable, but will not print wirelessly to the Officejet Pro 8600. The PCs print fine.
The frustration that is being felt is compound by the fact that the Macs printed just fine with the Officejet Pro 8600 2 weeks ago, and now the printer just shows "idle"... even with a new router. (see image below)
Please help, I appreciate any support.
As a side note, the HP Service rep was very friendly, and definitely tried to support the HP Product, which is much more than I can say about Netgear.
Thank you,
This question was solved.
View Solution.

Hi,
More likely the issue related with Multicast, which Apple devices relies on to communicate with teh device through the network.
First try unplugging the router for 30 seconds.
Plug it back to the power and wait for 2-3 minutes.
Turn the HP printer Off and back On, then check for any difference.
If the same persists, try changing your router configuration as following
Note: the settings below are not related with the HP product, I provide you the steps as a best effor and those are only based on my own knowledge. you may try modifying the router settings at your own risk:
Open the router configuration page (can be found listed as the Default Gateway by clicking the Wireless icon on the printer, then print a network configuration report.
Click the Advanced tab.
Click the Setup option from the menu, then click on WAN Setup.
Make sure to uncheck the box next to Disable IGMP Proxying and Apply the changes.
Click the LAN Setup on the same Setup menu.
Set the RIP Version as RIP-2 and Apply the changes.
Reboot your router and then check for any change.
I hope you may find that information useful, you may also use the user guide below for further information:
http://www.downloads.netgear.com/files/GDC/WNDR4500/WNDR4500_UM_07DEC2011.pdf
Shlomi
Say thanks by clicking the Kudos thumb up in the post.
If my post resolve your problem please mark it as an Accepted Solution

I am trying to setup iCal syncing with Mobile Me on Mac Pro and Mac Pro Notebook. I have accounts added in for MobileMe and Gmail. Problem is that iCal does not appear as one of the Sync choices in the MobileMe sync window on either computer?

I am trying to sync iCal with all my computers and devices via MobileMe. I cannot sync iCal on my Mac Pro nor Mackbook Pro. I believe accounts to be setup properly BUT on both computers there is NO choice to select iCal among the choices in "Sync Menu" on the MobileMe window in System Preferences. Help?

Greetings,
If you delete individual messages they will be deleted from other accounts.
If you setup the accounts as IMAP (which is the default for MobileMe accounts) you can remove the accounts and the other users will still have the email.
Alternatively if you don't want to see the account in the other user go to Mail > Preferences > Accounts > MobileMe account > Advanced > remove the check mark for "enable account". This leaves the account and just turns it off so you don't see it and it doesn't send / receive messages.
Finally, you should be backing up your data for safekeeping so even if you did delete the account and the messages magically vanished you could restore them: http://support.apple.com/kb/HT1553
Hope that helps.

An Intel iMac AND a MacBook Pro for Logic Pro?

I am torturing myself over this issue lately so any input you guys could offer would be welcome!
This is the situation:
After 3 months of serious debating whether to purchase a 20" Intel iMac or a MacBook Pro for Logic Pro, I went ahead about 3 weeks ago and got the iMac. My reasoning behind this was that even though I found the portability of the MBP very desirable, the iMac simply represented a better value with the big screen and bigger hard drive. Since getting it, I must say I love this machine and I have not had one single problem with it. Logic 7.2 runs like a dream on it. By the way, aside from maintaing my iTunes Library, occasional iLife stuff and web surfing with Safari, this iMac is for music production only.
But here's the problem:
Still, I can't seem to shake the desire for OCCASSIONAL portability. Keep in mind, I am only a "serious" music hobbyist; I create instrumental hip-hop, trip-hop, electronica style of music mainly with software instruments, loops and breakbeats. So needless to say, I don't tour or do a lot of travelling. But the prospect of being able to compose tracks or make beats in Logic anywhere is DESIRABLE to say the least. I could compose while sitting on the couch watching a game or laying in bed - even though I have no idea of how often I'd actually do that, just having the ability to do it is VERY APPEALING to me. Throw in the fact that the iMac currently shares deskspace with a PC that my wife uses - meaning that I often have to stop what I'm doing to let her use the space. With a laptop, I could move and still continue my flow. Lastly, I unfortunately have bad knees and a bad back so after a couple of hours (or 3 or 4) of sitting at the desk working on Logic, I am seriously hurting. Not comfortable at all. At least owning a MacBook would give me the option to move around to some place more comfortable if I desire.
So...
Even though I recently bought a wonderful iMac that works great, I'm seriously considering getting a 1.83 MBP with at least 1GB of RAM and the 100GB/7200 RPM drive to accompany it just for the portability factor. Sure, I could get a used G4 PowerBook or iBook, but all I own is the Universal Binary of Logic Pro; I would have a hard time accepting the decrease in speed I've gotten use to on the Core Duo. Besides, I inherently have a problem buying something (even used) that I know is old and out of date when the latest and greatest is available.
So here is the $25,000 question: Am I nuts for even considering this? Am I placing too much of a premium on the portability as I would use it?
This could easily be justified if I was a working musician on the road, but that ain't me. And you can believe that I'm definately not rich and thus don't have money lying around.
But I have obsessed over this so much lately, I feel that I almost have to get it just to put my mind at ease! I even briefly considered putting the iMac on eBay and just buying a MBP to replace it, but I love the screen real estate I get with the 20" iMac and I question if I'll be truly satisfied with a 15.4" screen FULL TIME. 17" might be better, but I doubt if I can wait until June for them to arrive. In addition, everything would connected via my wireless LAN and .Mac so file sharing should not be an issue.
Help!!!
What would you do? Sell the iMac or just get a MBP as cheap as I can?
Opinions, Please!
20" iMac Core Duo, 2GHz, 2 GB RAM, 250 GB HD, 128MB VRAM Mac OS X (10.4.4)

I love the portability my powerbook gives me. You can use a PB in your setup. You can run an external monitor for either PB or MBP. You can node. Universal Binary menas it is an application which has the components written for both PPC and Intel chips-so you don't need to do conversion. Nodes won't require you buy a nother license. so the answer is down to how much the 2 upgrades and 1 crossgrades will set you back vs how much use you'll get out of them. IMO the iMac is inexpensive (I mean that in a good way-worth hooding on to). Maybe just look at a refurb PB unless you really have the extra cash.

Is it possible to upgrade MacBook Pro 15inch iris pro Retina display version to Nvidia graphics card?

Hi
I purchased a MacBook Pro 15inch iris pro Retina display version (£1599) recently.
Can we upgrade tit with Nvidia graphics card?
Thanks

In USA, you can return a Mac within 14 days of purchase and buy a new one with the desired spec.
Retina MacBook Pro cannot be upgraded once bought.
Best.

HT204135 I recently migrated from a 2 year old MacBook Pro to MacBook Pro Retina and now cannot get my LaserJet 3200 to print. I downloaded drivers from HP Support site but printer just prints a line of gibberish per page, and many pages.

I recently migrated from MacBook Pro to MacBook Pro retina. Now my macbook will not print to my LaserJet3200 printer. I downloaded the drivers but still only prints a line of gibberish per page, and endless pages, when i send printer a print job. Any recommendations on how to correct this so the printer prints properly again?

Hi
where can I find the "generic PCL driver" you referred to Greg?
Also, I searched for a LJ 2100 d4river and found these. should I be working with the HP website? or an apple website? my Apple software update is current.
Find by product
Go
How do I find my product name / number?
5 matches found. Please select one below
HP LaserJet 2100 Printer series
HP LaserJet 2100 Printer
HP LaserJet 2100m Printer
HP LaserJet 2100se Printer
HP LaserJet 2100tn Printer
HP LaserJet 2100xi Printer

Does it worth to move from macbook pro to macbook pro retina?

Hey
I have macbook pro with
Processor 2.66 GHz Intel Core i7
Memory 8 GB 1067 MHz DDR3
Graphics NVIDIA GeForce GT 330M 512 MB
and its good but many people are saying macbook pro 2013 with retina display is the best laptop and has many features so do you advice me to move from macbook pro to macbook pro 2013 with retina display?
thanka

It's a very sweet machine, of course. Although the upgrade path is a bit dicey. Just my opinion, but unless you have very demanding graphics needs (in which case you probably should have a desktop system with a huge monitor), I don't see the point of spending all the money. Probably you would get more value if you take your current machine and max out the RAM and get an SSD.
It's hard to advise anyone in such matters via the internet.
Here are some good reviews:
Apple MacBook Pro with Retina Display Review (2012)
MacBook Pro with Retina display (15-inch) vs. MacBook...
By the numbers: 13-inch Retina MacBook Pro vs. other MacBooks ...
13-inch MacBook Pro w. Retina vs. old MacBook Pro vs. Sony Vaio ...

Problems installing Adobe acrobat 6.0 Pro on Surface Pro

I cannot complete the installation of Adobe acrobat 6.0 Pro on Surface Pro. The process stopped and the status bar is about 70%. I cannot close of cancel the process. It is stuck on my computer.

Is it running Win 8 and is it 32 or 64 bit OS? AA 6 is not listed as compatible with Win8 and you may very likely have to buy AA XI. Sorry, but AA 6 is too old for an upgrade.

Font Issue in Acrobat 9 pro and X pro

Fonts are not displaying properly after selecting the text with Touc-up tool in Acrobat 9 pro and X pro how to solve this issue?

When Acrobat X installs it will remove an Acrobat 9 install.
Suggest you Deactivate then uninstall Acrobat 9 before installing Acrobat X.
May want to root about to locate that Acrobat 9 CD first.
As the preponderance of resources in Adobe's "Education" space deal with use of Acrobat X you may be better off in the long run by working out of and learning "X".
http://www.adobe.com/education.html
Be well...

Can I use Upsell package to go from 7 Pro to X Pro?

As title - the blurb for the Upsell package says to use it you must have:
Adobe Acrobat Standard 7, 8, 9, or X
Adobe Acrobat 3D
Adobe Acrobat Pro Extended 7, 8, or 9
Does this really mean I can't use an Upsell package to go from 7 Pro to X Pro?

Thanks - the snag is that I'm in the UK, and the Upgrade package costs £228 (about $360) compared to the $199 it costs in the US.
However I can get an Upsell package for about £100 so I'm trying figure out if this will work.
I don't use Acrobat much and I only need to upgrade as I've moved to a Windows7 laptop, so I don't want to spend any more on this than I have to, but I certainly don't want to waste money on the Upsell package if it won't work.

Acrobat 9 Pro and X Pro

Is it possible to have both 9 Pro and X Pro on the same compter? Why because I am concerned that Pro X if it does not install correctly I will be behinf teh eight ball on my projects.

When Acrobat X installs it will remove an Acrobat 9 install.
Suggest you Deactivate then uninstall Acrobat 9 before installing Acrobat X.
May want to root about to locate that Acrobat 9 CD first.
As the preponderance of resources in Adobe's "Education" space deal with use of Acrobat X you may be better off in the long run by working out of and learning "X".
http://www.adobe.com/education.html
Be well...

When I left my former employer, Pollinate Agency, I bought a MacBook Pro with Acrobat Pro (version 9 or possibly 9.5) installed from the company. I recently had a serious computer crash, and needed to get all contents erased. The support provider didn't h

When I left my former employer, Pollinate Agency, I bought a MacBook Pro with Acrobat Pro (version 9 or possibly 9.5) installed from the company. I recently had a serious computer crash, and needed to get all contents erased. The support provider didn't have my product key, so could not reinstall Acrobat Pro for me. Since then, I have gotten the product key sent to me from my former employer, [ REMOVED ] So I need help in re-downloading, installing and activating the Acrobat Pro software on this computer.

Please remove the S/N immediately (I can't or would). Never post them online. As for download you can go to http://helpx.adobe.com/acrobat/kb/acrobat-downloads.html on the right panel to get 9 pro. I am not sure there is a MAC version there, but that is the first place to go. If it is the proper version, then please back it up to CD and/or portable HD, not the system HD.

Can I run Acrobat 9 Pro and X Pro, can't afford plugin upgrades

Can I run Acrobat 9 Pro and X Pro
Can't afford plugin upgrades from 9 to X

If you wish to run both the version on the same machine. It's not a supported configuration as Version 9 and X Pro share the same namespace and you may run into issues which would be hard to fix.
I would recomend to use single version. Let me know, if you need more information.
Regards,

How to Compress non-image object in Acrobat 9 Pro/Acrobat X Pro

Hi,
I am newbie and don't know where to post this question exactly. Forgive me if I am incorrect.
How can we compress "non-image object" in "Acrobat 9 Pro/Acrobat X Pro"
Thanks in advance for your suggestion & help.
Thanks & Regards,
Raja. S

Thanks for the reply.
I want to compress the "non-image" objects (i.e pagragraph contents and not images) for the entire PDF file in the "Acrobat pro X" application manually and not with the tool.
Please share me if you have any idea on this.
Thanks,
Raja. S

Sending Premiere Pro sequence to Pro Tools for automatic audio conforming

I’m looking to implement an online-offline workflow at my production company, and I’m trying to figure out if it’s feasible to send a sequence from Premiere Pro to Pro Tools with enough metadata to take advantage of Pro Tools’ automatic conforming feature.
Premiere Pro or Audition doesn't seem to have any kind of feature like this, so I’m turning to Pro Tools. Here’s a demonstration of the feature from Avid: http://youtu.be/Gz9e9LuIdXU
For color grading, we’re already sending XML from Premiere Pro into DaVinci Resolve, and DaVinci Resolve perfectly automatically conforms the offline proxies to online high-quality clips suitable for grading. I’m trying to accomplish the same thing with the audio clips to prepare a sequence for sound mixing. The offline proxies in a sequence contain only compressed stereo tracks, but online audio clips have all of the separate uncompressed tracks for each microphone.
My initial thought was that, before any offline editing occurs, I might, in the Premiere Pro Metadata panel, add the names of the sound rolls to all the offline proxies in the “Tape Name” field.
I’m wondering if that metadata for those clips in the Premiere Pro Project Panel are included in an EDL that would be exported out of Premiere Pro, so that Pro Tools would know how to correctly choose online audio clips.
I know EDLs contain timecode, and that seems like it would be sufficient for Pro Tools, if production only occurred within one day. However, if there are audio clips recorded on different days, at the same time of day, some audio clips in a sequence would have identical timecode, and Pro Tools wouldn’t know which clip to automatically conform. It seems like Pro Tools would choose which clip to conform by first looking at timecode, and then if there were multiple clips with the same timecode, it would resolve the conflict by identifying the specific sound roll. This is why it seems important to have the sound roll metadata included in the EDL out of Premiere Pro.
EdiLoad looks like software that might be able to batch update sound roll metadata for an EDL already exported out of Premiere, but I’m not sure.
http://www.soundsinsync.com/products/ediload
Manually going through Pro Tools and assigning correct sound rolls in a picture-locked cut wouldn’t really be an improvement over manually conforming. If I have to go through a cut and locate online audio clips, I might as well just conform manually.
So my questions are:
When exporting an EDL out of Premiere, does the EDL include “Tape Name” metadata for Pro Tools to read as a sound roll? If not, is there another format I could use that would make this round-trip feasible?
If not, does anyone have experience with EdiLoad? Would EdiLoad work to do what I'm trying to do?
Is there any other way to accomplish automatic conforming, or something else that I'm missing?
-- Seth.

See if this helps.
FAQ: Why are some codecs and sequence presets missing from my installation of Premiere Pro?

QT Pro in XP Pro

Similar Messages

Maybe you are looking for