QT Pro "Open Image Sequence" only grabs one image

QuickTime Pro:
When I try to "Open Image Sequence" on a set of .png images, I don't get the request for a frame rate, and it only opens the first image.
(Actually, the frame rate request window may be flashing by quickly.)
I have the image files numbered sequentially.
Any ideas appreciated. On my previous laptop it worked fine !
Thanks,
David

Hey there,
Your problem is rather strange, I have not had this problem myself. I open sequences all the time with no hassles. I just tested it now with .png files which you've used, no issue. I'm on QT 7.4.1.
I've also just updated to 7.4.5 on another Mac (G4, OSX 10.4.11), and it works fine. Have you asked around to see if anyone else is experiencing this issue?
If it was easy enough to down grade to 7.2, perhaps you could try re-installing QT 7.4. If it doesn't work, just go back to 7.2. Though... I don't want to be the blame for your loss of another Pro code!!
Good luck.

Similar Messages

  • Database 'TEST' is already open and can only have one user at a time.

    Hi all,
    Could some help on this issue as per urgency!
    Database 'TEST' is already open and can only have one user at a time.
    I also tried this command but having the same error, please let me know how to troubleshoot this issue
    Use Master
    GO
    Select * from master.sys.sysprocesses
    Where spid > 50
                And dbid=DB_ID (‘StuckDB’))  -- replace with your database name
    Thanks

    Hi Tony,
    sorry got the same error again, it can't allow me sp_who2 as well
    I tried above command got the following error
    Changes
    to the state or options of database ‘TEST’ cannot be made at this time. The database is in single-user mode, and a user is currently connected to it.Msg 5069, Level 16, State 1, 

  • After i have downloaded an album from iCloud to my new macbook pro. Itunes will only play one song at a time. If i hit the fast forward or back button will not do anything. I have to use the mouse to hit the next tidal in the album then hit play for it

    after i have downloaded an album from iCloud to my new macbook pro. Itunes will only play one song at a time. If i hit the fast forward or back button will not do anything. I have to use the mouse to hit the next tidal in the album then hit play for it to play the next song. Or put it in the UP NEXT.

    First, make sure these items have checkmarks next to their names in iTunes. Continuous playback only works on checked items. Itunes will play all checked items in a list whether or not they're from the same album.
    If you see that nothing in your library is checked and you want to check everything, hold down Ctrl while checking an item. This checks everything.
    Next, fixing the "1 of 1" problem is easily. Select all the tracks that make up the book/album. Let's say there are 15. Press Ctrl-I. Doublecheck that the album box is filled in with the name of the book, and if not, type it there. Enter "15" in the box for the total number of tracks. Click OK. Now all the items should be "1 of 15," "2 of 15," and so on.

  • Image sequence only opens 1 image in QT pro

    Hi,
    I have 1500 numbered jpeg images and every time i go to do an image sequence it only adds the first frame into the image sequence!! Help!!!

    I think in some cases OS 10.6.x does not allow to select more than 1 file. In QT Pro I also cannot make image sequences anymore, however MPEG Streamclip does the job (open files, select all files in the pulldown menu).

  • Sequence only has one channel of sound

    I have a few sequences that I have added to a master sequence and only have one channel of sound in the master sequence.
    In the actual sequence of each sequence that was added I have 2 channels of sound.
    What would correct this issue?
    Or does cut and paste everything in each sequence into my master sequence work better?
    David

    re: the decklink comment - that was directed to the thread jacker ... lol.
    re: cloned system drives. Updating does not create a clone automatically. It is something you have to do. In the interest of locking the barn door after the paddle has been lost upstream - get a firewire drive as large as your system drive. Download a copy of Carbon Copy Cloner (shareware) and when your system gets working again, Clone the working drive to the firewire drive. This is your insurance when you update the OS, QT and/or any of the FCS pro apps.
    Once you have a clone, if your update goes wrong, you can copy the clone back over the bunged installation and be back up and running within an hour or so.
    Regarding FCP 6.0.4, perhaps someone archived a version (or you can find it on the FCP updates page). If you use Software update, it will want to install the most recent version.
    x

  • 38 versions in project but only showing one image

    I downloaded 38 photos to Aperture 3. I adjusted colour etc . Now when I open that project it shows only one image, however when I put the cursor over the name of the project in the library list it states there's 38 versions. Can anyone suggest where the other 37 might be hiding? I can't figure out where to look for them.

    Paynter Girl,
    Do you have a filter on? Look in the upper right of your browser window.
    nathan

  • PDF image sequence only shows first frame

    Does anyone else have a problem with this? I am trying to make a simple looping two-frame vector animation. Without converting to video or pixels (I need this to stay flexible), what are my options?
    I've tried making the layers turn on and off with a square oscillation, but I can't figure out the correct speed for on-one-frame-off-the-next :/
    Any tips?

    Changed it to four digits and nothing. Previewing the image sequence in the browser shows the second frame as flashing white :/
    Here are the images in question:
    http://dl-client.getdropbox.com/u/19955/anim-vice.zip

  • Applying  a change to a selection in Aperture only changes one image

    Disclaimer: Apple does not necessarily endorse any suggestions, solutions, or third-party software products that may be mentioned in the topic below. Apple encourages you to first seek a solution at Apple Support. The following links are provided as is, with no guarantee of the effectiveness or reliability of the information. Apple does not guarantee that these links will be maintained or functional at any given time. Use the information below at your own discretion.
    If you are attempting to apply a change to a selection of images but the change only effects one of the images there are a couple of possibilities:
    # You have Primary Only selected. This setting is found at the lower right hand conner of the main window. It is the middle icon with the 1 on it.
    # You are attempting to apply a rating, color label or flag from the Metadata pane of the Inspector. Regardless of the state of the Primary Only button if you set these adjustments from the Metadata pane then only the primary selection is modified. To apply a rating, color label or flag to a selection use the keyboard shortcuts or the *Metadata-> commands*.
    This is the 1st version of this tip. It was submitted on February 8, 2011 by Frank Caggiano.
    Do you want to provide feedback on this User Contributed Tip or contribute your own? If you have achieved Level 2 status, visit the User Tips Library Contributions forum for more information.

    This tip is ready for consideration and inclusion into the *Aperture Installation, Setup and General Usage* forum.
    thanks

  • Only want one image version in MobileMe album

    When I add a version to a MobileMe album, all of the versions are added to the album. When I delete the other versions from the MobileMe album, those versions are deleted from my library.
    I only want one version added to the MobileMe album... and the other versions to remain in my album.
    Any ideas?
    Thanks!

    Within Aperture you have Images, which are constructed on-the-fly from two files (the Master and the Version).  You get an image-format file _only_ when you export an Image.  You select the file name (usually a scheme) when you create an image-format file (that is, when you export).  Look under "Aperture→Presets→File Naming" for built-in Presets.  You can, of course, create your own or customize any provided.
    The Preset is applied to only the file newly created by your "export" command.  It is not applied to the Image in Aperture (unless you rename your Versions or your Masters).

  • Import Image Sequence not importing all images

    I have a sequence of 99 JPG images that I am trying to import into Premiere Pro. These images were created by an export from Lightroom.
    When I perform the import starting at the first image, only 35 images are imported.
    If I import the sequence starting at the 34th image, only 2 images are imported.
    If I import the sequence starting at the 35th image, only 1 image is imported (and it is imported as an image file it appears).
    If I import the sequence starting at the 36th image, the remaining images are imported.
    I have tried a number of different settings for the export from lightroom, but it doesn't seem to make a difference. For example, if I export as TIFF I see the exact same problem. If I export as JPG using a smaller image size I see the exact same problem.
    I have tried "Replace Footage..." to no effect.
    When I inspect the image files using an image view there appear to be no issues with the files. File sizes are consistent and not inordinantly large (~5MB).
    The filenames are all properly numbered as expected by Premiere Pro.
    I have done this successfully dozens of times before this problem arose, and I have done it successfully a number of times since the problem arose. The problem appears to happen only with this particular set of images.
    I can work around the problem by importing the images as two separate imports (one starting at the first image and a second starting at the 36th image) and putting them both in a single sequence. In fact, this spliced sequence looks as expected with no missing frames or anything else untoward that I can see.
    I've poked around with this for a couple days, and cannot discern any other factors that may be causing this.
    Does anybody have any idea what might be going on?

    I checked the filenames again and they're properly sequenced with no extra or missing spaces or anything else that doesn't follow the pattern of the first 34 images. In fact, I took a screenshot of this, and in doing so I figured out what the problem is.
    Here's a screenshot of the directory with all the images.
    As I was reviewing this screenshot, I noticed that the "Date" column goes over midnight. Images 0001-0034 all took place before midnight, and images 0035-0099 took place after midnight.
    This column shows the capture time of the images, coming from the camera and through the export from Lightroom. This is different from the creation date of the exported file, which is shown in the "Date modified" column (cropped out of screenshot). In other words, you can see that I took the pictures on February 25 and 26, but exported them on March 1.
    To verify that this might be the problem I used "Edit Capture Time..." in Lightroom to shift all the images an hour earlier. This means that there is no longer a date change in the sequence as they all have capture times before midnight. I then exported the images from Lightroom again, and imported them into Premiere Pro.
    When I do this, all the images are imported into Lightroom successfully.
    I realize this is only one data point, but it sounds like Premiere Pro is maybe using the capture time as part of its sequencing heuristics, and for some reason it isn't handling a date change properly. Or maybe something else is afoot.
    What do you think?
    Message was edited by: reastick trying to fix link to screenshot...
    Message was edited by: reastick ...well that didn't work either...

  • When I start facebook, sometimes it loads ok. But, since v29, it often loads with no photo images or only some photo images shown..just empty boxes.

    Facebook loads ok as far as text is concerned. But, it often loads without any of the photo images visible. Sometimes it loads with a few of the images visible. When the images are missing there are just empty boxes where the photos should be. I never had this problem until updating to the latest firefox v29. If you guys can't fix this problem, is there any way to revert back to an earlier version of firefox? tht version worked just fine.

    If images are missing then check that you do not block images from some domains.
    *Press the F10 key or tap the Alt key to bring up the hidden Menu bar.
    Check the permissions for the domain in the currently selected tab in "Tools > Page Info > Permissions"
    Check "Tools > Page Info > Media" for blocked images
    *Select the first image link and use the cursor Down key to scroll through the list.
    *If an image in the list is grayed and "<i>Block Images from...</i>" has a checkmark then remove this checkmark to unblock images from this domain.
    Make sure that you do not block (third-party) images, the <b>permissions.default.image</b> pref on the <b>about:config</b> page should be 1.
    Make sure that you haven't enabled a High Contrast theme in the Windows/Mac Accessibility settings.
    Make sure that you allow pages to choose their own colors.
    *Tools > Options > Content : Fonts & Colors > Colors : [X] "Allow pages to choose their own colors, instead of my selections above"
    Note that these settings affect background images.
    See also:
    *http://kb.mozillazine.org/Website_colors_are_wrong
    There are extensions like Adblock Plus (Firefox/Tools > Add-ons > Extensions) and security software (firewall, anti-virus) that can block images and other content.
    See also:
    *https://support.mozilla.org/kb/Troubleshooting+extensions+and+themes
    *http://kb.mozillazine.org/Images_or_animations_do_not_load
    *http://kb.mozillazine.org/Websites_look_wrong

  • Macbook Pro 15" DVD drive only displaying certain images?

    Put in the disk and it loads about half of the images on it.  The rest say they are truncated or not good files.  Or that I don't have permission to view them.  This is happening on two Mac's that we have in the office but on a windows PC these images display fine.  More info:  Sometimes the images will work just fine, then they seem to stop working over time?  is the drive faulty?  Please help.
    Processor: 2GHZ intel core i7
    Memory: 4GB's
    Graphics: AMD radeon HD6490M256MB
    OSX 10.8.4 (12e55)

    Grab a DVD Lens Cleaner disc. With lens cleaners the more brushes they have the faster/better they work and you only need to let it spin a few seconds.
    This is the one I use now on all my CD/DVD hardware:
    http://www.allsop.com/classic-cleaning/ultra-pro-lens-cleaner/
    I've also used these and they work very well:
    http://www.allsop.com/classic-cleaning/laser-lens-cleaner/

  • Can only rotate one image at a time in Aperture

    I'm selecting a group of images and want to rotate them all two times counter clock wise (180 degrees). Shouldn't I be able to select all those images and hit the bracket key twice to rotate them all? What's happening is that I'm selecting all these shots but only one is rotating when I hit the bracket keys.
    I swore that Aperture let you group rotate images by selecting all the ones you wanted to rotate.
    What is going on here?
    Antonio

    Doh!
    That little friggin feature gets me all the time. In fact, this happened over a year ago and I think you're the one that pointed it out to me. It's déjà vu all over again.
    Still, it's a little feature that is so easy to forget that it's turned on.
    Thanks Ian!
    Antonio

  • Opening several documents only in ONE windos of StarOffice

    How can I make StarOffice to open ONLY one window in the task bar when opening several documents? Thanks

    It would help to know how you are scanning and the hardware used. There are just too many possibilities to answer your question as stated (if we even know the answer).

  • AVG says using too much memory because multiple firefox's are open but I only see one.

    AVG scans regularly in background. Lately it has been showing a popup window that says multiple applications of Firefox are running and using too much memory so I should close some. But, I only can see 1. Tried CTRL ALT DEL to see if I could find answer, but only showed 1 firefox, and it was using over 28,000. So I think AVG is correct, but can't find out how to see what or where they are. They DO NOT show on the lower menu of the main screen, so I assume they are in the background. Don't have viruses, and Firefox regularly updates itself. What should I do to fix?

    Hi cmich80220-
    It's true you should only be able to run one instance of Firefox at a time. I searched but was unable to find anyone else with a similar issue. If the problem gets back to Firefox running slowly, you might check out this article for troubleshooting:
    [Firefox is slow]]
    Hope that helps.

Maybe you are looking for