QT Pro will not install

I purchased QT Pro for Windows and can not get it to upgrade. The registaration appears to be successful, but their is no change in the QT features.
I have uninstalled and reinstalled iTunes and QT several times, downloaded and installed the stand alone ver. of QT, updated Direct X, everything that Apple has recomemnded, but no luck.
Can anyone assist me further with this?
Thnak you.

If the registration is successful (no alert message) the QuickTime Player will now have the word "Pro" removed from some menu items.
That's it. The Player is now your editor and you can use all of the menu items.

Similar Messages

Acrobat 9 Pro will NOT install (CS4 Design Premium)

Acrobat 9 Pro will NOT install (CS4 Design Premium)
Acrobat Pro 9 will not install (FAILED), although every other program on the CS4 DVDs did install properly.
I have followed the instructions, and have tried with no programs running, not even virus protection (which is an insane thing for Adobe to demand of a product being installed where the installation routine is expecting an Internet connection): FAILED.
I uninstalled my Acrobat 6 Pro, (a standalone Pro version that I had to have a few years ago.) I uninstalled that working program knowing I had no idea where my original Adobe Acrobat CD is located, so I was essentially cutting myself off of Acrobat Pro if the Acrobat 9 Pro install continued to fail.
I reported this to Adobe support online.
I have followed the instructions to disable startup items and services, then tried the Acrobat 9 Pro install: FAILED.
At that point, I gave up installing Acrobat 9 Pro. I didn't have any more time to screw with it - I would re-visit the installation failure later.
Lo and behold, a client sent me a PDF file of a brochure, in an email, and I had to grab some text from it to put on his website (Done in Dreamweaver CS4.) Well, damn, now I'll have to go back and get that install to work...FAILED!
Suspecting a problem in the installation routine on the DVD, I decided to download the trial version of Acrobat 9 Pro. So, I did. It downloaded and installed without a hiccup, and I had Acrobat 9 Pro working for 30 days...
I did what I had to do, using the trial version, then figured I would re-visit the installation issue later, when I had a few hours to dedicate to all the hell of calling Adobe software support, handholding, maybe registry edits, multiple reboots, and multiple attempts at doing everything again, just so the support person would know that I did follow all the steps correctly to prove thw outcome is sill FAILED!
Oh crap, I got another PDF file. No problem, I thought, I don't need to edit the PDF, just read it. When I tried to open the file, Acrobat 9 Pro plastered a screen over the program - the screen saying my 30 day trial version has now run out, demanded a serial number, or quit. My CS4 serial number would not activate it, and so I had to quit, not even being able to read the PDF file.
So, I un-installed the trial version of Acrobat 9 Pro that had installed without a hitch and had worked flawlessly for 30 days.
Now I'm going to have to visit hell, and get the software that I paid hundreds of dollars for to work...
Please STOP and NOTE: Acrobat 9 Pro installed perfectly from the downloaded Internet version. What does that tell you? There are no operating system issues, no hardware compatibility issues (which I knew anyway, as the OS and hardware is up to date.) Even more significantly, there is no issue with the Windows registry, or other versions of Adobe Acrobat that had been installed before in the machine. My conclusion was that it has to be a problem with the installation routine on the CS4 disks.
So, I spent an hour on the phone with Adobe personnel: software support, to customer service, to sales, to customer service, and back to sales. After software support came to the conclusion that I needed to UNINSTALL ALL OF CS4, and run a clean-up utility, I knew I had to try getting a new set of DVDs and hope the installation routine problems/bugs had been worked out.
After being batted back and forth by Adobe Customer Service and Adobe Sales, I finally got someone to agree to send a set of DVDs to me.
I got the DVDs. I tried to install Adobe Acrobat 9 Pro: FAILED
As I told the software support person, I do not want to un-install the entire CS4 suite. I have all of those programs working fine, and have about a dozen web sites within Dreamweaver CS4 painstakingly set up and active, and some of them are current projects that I am working on daily. I also have multiple extensions installed, and spent quite a bit of time getting all of those programs set up for my preferences and my work flow. I DO NOT WANT to uninstall the entire suite of applications to get Acrobat 9 Pro to install.
And the conclusion of the "sophisticated" Adobe Support Advisor as to what specifically was the instalation issue?
Adobe Support Advisor
The module found no solutions to report for the selected log file.
If you continue to have difficulties with the application,
please contact Adobe Support: http://www.adobe.com/support
System Information :
Operating System = Windows XP
Locale = en
At this point, what I want is to know what registry keys to edit and which folder(s) to delete to eliminate previous traces of Acrobat. In other words, just exactly the tiny piece of the "clean-up utility" that I need to run in order to allow the *Y#^%@#&#(& installation routine to work for Acrobat 9 Pro. I have no intention of uninstalling Dreamweaver CS4, as that is my business livlihood, and I know that my Dreamweaver CS4 client files/sites could not be read by earlier Dreamweaver versions. Asking me to uninstall Dreamweaver, Photoshop, Illustrator, Flash, InDesign, and Fireworks is insane. Your bad installation routine is not my fault, and you cannot expect me spend countless hours getting all those programs set up the way I want and with all my client/work files working correctly and all the extensions set up properly. So, if Adobe software support refuses to tell me what registry keys need to be changed, then I want Adobe Sales to send me a new, standalone version of Acrobat 9 Pro on disk.
Dennis

I hit the same problem except I had a Reader X installed not a pro version. For me the solution was to really make sure that nothing else was running. I followed the steps from http://support.microsoft.com/kb/2438651#reso2 the link is goofy so here is the pertinent text:
Programs that are currently running on your computer may be interfering with the installation processDisable programs that might be interfering with the installation process. To do this, follow these steps:
Click Start
, type msconfig in the Search box, and then click msconfig.exe.
If you are prompted for an administrator password or confirmation, type the password, or provide confirmation.
On the General tab, click Selective startup, and then click to clear the Load startup items check box.
Click Services, click Hide all Microsoft services, and then click Disable all.
Click OK, and then click Restart.
Try running your software program installation.
When you are finished troubleshooting the problem, restart the computer in Normal Startup mode. To do this, follow these steps:
Click Start
, type msconfig in the Search box, and then clickmsconfig.exe.
If you are prompted for an administrator password or confirmation, type the password, or provide confirmation.
On the General tab, click Normal startup, click OK, and then click Restart.

Acrobat X Pro will not install - Outlook running

Acrobat X Pro will not install - says Outlook & Winword are running and need to be closed.
(They are not running)

hi vaughnlm
try to check your task manager and go to processes tab if outlook is listed... if it is highlight the process and click end task.
hope it helps

Download of adobe pro will not install

The Adobe Pro will not install on my computer. The download starts and then gets hung up at 4%.

Hi Leah_teamhealth,
Please try to download Acrobat from the below link and check.
http://helpx.adobe.com/acrobat/kb/acrobat-downloads.html
Try to turn off the antivirus and firewall on your machine.
Also try a different browser to download the file.
Regards,
Anand

Mid 2010 Mac Pro will not install 10.7.3 update

Hi all,
My Mac Pro (Mid 2010) will not install the 10.7.3 combo update. I use the software update tool to download the update, it goes to reboot. It starts loading the update in and at the very end it will tell me none of the updates can be installed because an unknown error has occurred. I have tried multiple times and had the same result. It also will not install any other updates such as the Airport Utility and iTunes update. This is a work computer so I think it is important to have all the updates installed on it.

Then the problem is:
You have Apple Pro RAID controller
A software RAID
Lion Recovery should be on one of your hard drives, not RAID.
Do a clean install of Lion on one of the other hard drives you have
Anything else we should know about your setup? controllers do matter.

Acrobat Pro will not install

Okay, excuse my lack of patience. But I have now called Adobe customer servic (in India, and I'm in the U.S.) three times now, and I have not resolved this issue! I am a Creative Cloud member, and my Adobe Acrobat Pro will NOT work. On top of that, the Adobe Application Manger is $%@ useless. I get errors constantly. I'm on Mac OS 10.8.1. My other Adobe software works. But Acrobat Pro has not worked at all since I purchase Creative Cloud a few months ago. At any point, if Adobe would like to fix this issue, that would be great. Like I said, I've already called three times in the last two months. And the low level tech support guys are useless. I spend an hour or two on the phone with them and the issue is NOT resolved.

So, it totally appears as if it was a network issue. The corporate network where I work is quite likely the culprit. Where I was thrown off is that since I have admin rights on my computer, I can install software. But using Adobe Application Manager to install Adobe software wasn't working. And to make matters worse, there didn't appear to be any way to install Acrobat Pro for Mac without using AAM. The workaround that I used previously was to install the trial versions of Adobe software, and then just register them using my username and password. But the workaround for being able to install everything using AAM was to bring my computer home and download from my home network. Unfortunately, Adobe tech support didn't suggest this during the three times that I called them. But it doesn't matter now, problem is resolved.

Itunes 7 - win xp pro will not install "iTunes needs quicktime" error

iTunes 7 will not complete the install - it says the old version of iTunes could not be uninstalled and then says "iTunes needs quicktime". I tried installing quicktime alone and it also won't install saying it cannot remove the old version. Tried a manual uninstall and I get the same error.

A tip posted by b noir on the following link solved my problem. I just downloaded "Windows Installer CleanUp Utility" from Microsoft, removed my existing version of Qiucktime. Restarted my computer then started fresh with Itune 7 installation. No more problems.
here's the link:
http://discussions.apple.com/thread.jspa?threadID=643006&tstart=0
Hope this helps. Good luck.

MacBook Pro will not install iPhoto

My new macbook pro would not let me update my iPhoto application. So, I was told to try to delete it then reinstall it. The apple tech I emailed with told me this was because I needed to download the iOS x lion software so I did and it will not let me reinstall my iPhoto back to my computer. When I try doing so, it asks for my apple ID and password, I enter it, then a message appears that says, "These apps cannot be accepted on this computer. Future updates of these apps can be found through Software Update." What do I do to get my iPhoto back!

Contact the apple tech you worked with and have him resolve the issue for you.

My MacBook Pro will not install yosemite

MMy installation will not work at all it sits at 22 minutes remaining then cuts out and pops a message saying 'file system verify or repair Failed' then I try to to verify disk to repair it but it says I have to repair it first! Help I can't use my MacBook!

Since it sounds like after you did the install it worked good for you, but after using migration assistant you ran into problems . I would have to say that something in you older files is causing a problem. Try booting in safe mode.http://support.apple.com/en-us/HT201262 Then is this works go to your system preferences /users/login items and uncheck any that are there. Then go to security and uncheck require password. You might have to unlock and inter password to do this. Then go to utilities/console/crash report and see if you can port it in here. See if you can now boot normally.

HT1199 my mac pro will not install updates or new software such as printers what could be the problem

I have tried to complete updates and install software and for some reason it will not update or install new software such as a printer. What could be the problem

A reset may help. Tap and hold the Home button and the On/Off buttons for approximately 15-20 seconds, until the Apple logo reappears. When the logo appears, release both buttons.
No content is affected by this procedure.

Windows XP-Pro will not install on my new P965 Platinum

I hope someone can help me with my problem.
It seems that everytime i try to install Windows XP-Pro after the initial
drivers setup i get this Error Message:
A problem has been detected and windows has been shut down to prevent
damage to your computer.
If this is the first time you've seen this stop error screen, restart
your computer. If this screen appears again, Follow these steps:
Check to be sure you have adequate disk space. If a driver is identified
in the stop message, disable the driver or check with the manufacturer
for driver updates. Try changing video adapters.
Check with your hardware vendor for any BIOS updates. Disable BIOS
Memory option such as caching or shadowing. If you need to use Safe Mode
to remove or disable components, restart your computer and press F8 to
select Advance Start up options, and then select Safe Mode.
Technical Information:
*** STOP: 0x0000007E (0xc0000005, 0xF78350BF,0xF7C81208,0xF7C80F08)
*** PCI. sys-address F8350BF base at F782E000, Datestamp 3b7d855c
This is a new build with a Samsung Spinpoint SP2504C SATAII Drive but
when this occurred i thought that it might be the drive that was the
problem.So i therefore put it i my Old PC and tried to install Windows
XP-Pro onto it which i did with no problems at all.
I then put the drive back in my New PC where it Booted Up First Time and
runs OK and i have even installed Software onto it.In fact i am using at
this very minute as i type.
Unfortunately when i still try to Reinstall Windows XP-Pro on my New Build
with my P965 i get the same Error Message as above.
Can anybody please help.
Thanks
P965 Platinum
Intel Core 2 Duo E6300
Samsung Spinpoint SP2504C SATAII
Corsair 1GB DDR2 Twin2X(5x512MB)
inno3D GeForce 7600GT
Creative Sound Blaster X-Fi Extreme Music Sound Card
NEC ND-3520 DVD
Arctic Cooling Freezer 7 Pro
Thermaltake Toughpower 600W
Thermaltake Tsunami Dream Case

Quote
I hope you don't mind me asking this question for Jack the Newbie.
You say i have to use a Windows XP-Pro Install-CD that includes SP2 as well as the JMicron driver for the JMicron IDE-Port which i have my Optical Drive connected to.I know this is telling me how to fix my problem, but what i would also like to know is WHY do i have to install it with SP2 & the JMicron driver like this on my P965 when it installed on my old pc with just the XP-Pro Install-CD.
Your Windows Installation CD should be as up to date as possible, especially for newer hardware. SP1 is from 2002, SP2 was released in 2004. Neither SP1 nor SP2 install CDs provide the proper drivers for the JMicron chipset used on your mainboard. I cannot give a detailed list about the differences between SP1 and SP2. I just know, that there are a lot of problems when people do not use SP2 on Intel 975/965 Chipset-boards which where released in 2006.
When you say that your installation works fine on your old PC I believe you. It worked on my old Laptop too. However I was not able to install XP Pro on my 975X-board without SP2 at all until I upgraded my Installation CD.
Quote
Garfield,
I had exactly the same problem--because I had my optical drive hooked up to a Promise IDE controller, rather than to a mobo IDE connection. Turns out the Promise will read and write the optical drives OK, just won't boot from them properly. And, somehow, that affects Windows Setup.
I don't know anything about the JMicron and the need for SP2. But, as you can see from my sig, I'm using XP Pro SP1, and once I moved my NEC 3500 back to the mobo IDE (as secondary behind my IDE hard disk) everything worked like a champ.
Just my $.02.
Stahlwird
To relate Garfields problem with your solution is a mistake. Your board does not use any JMicron hardware, has NVidia chipset instead of Intel and an AMD CPU. Your are talking about a totally different Setup here.

Windows 7 Pro will not install on iMac after HD replacement.

I have a late 2009 iMac on which I have OS X 10.8 Mountain Lion and ran Windows 7 Professional in Bootcamp. My iMac wound up having a defective hard drive which was just replaced last week under warranty. The problem is now I am unable to install Windows 7 in Bootcamp. I use the Bootcamp assist to partition the HD, it goes through the motions of installing Windoes 7 but at a certain point after 2 reboots and just before it would say Windows is setting up your computer for first use the screen goes black and nothing happens. The iMac is still turned on because if I hold the power button down I hear it shut off. When I turn it back on I can see that Windows was not fully installed.I tried to see what it says running in safe mode, and then I can see that it wants to continue setting Windows up but I get a message that Windows cannot be installed in Safe Mode, and I should reboot but then I get the black screen again. I've tried to repair the installation but to no avail. I've done this using both 32 bit and 64 bit with full disc of Windows 7 Professional but neither work.
Does anyone have any idea what could be wrong and what I can do to rectify this problem? Thanks in advance for any help.

Quote
I hope you don't mind me asking this question for Jack the Newbie.
You say i have to use a Windows XP-Pro Install-CD that includes SP2 as well as the JMicron driver for the JMicron IDE-Port which i have my Optical Drive connected to.I know this is telling me how to fix my problem, but what i would also like to know is WHY do i have to install it with SP2 & the JMicron driver like this on my P965 when it installed on my old pc with just the XP-Pro Install-CD.
Your Windows Installation CD should be as up to date as possible, especially for newer hardware. SP1 is from 2002, SP2 was released in 2004. Neither SP1 nor SP2 install CDs provide the proper drivers for the JMicron chipset used on your mainboard. I cannot give a detailed list about the differences between SP1 and SP2. I just know, that there are a lot of problems when people do not use SP2 on Intel 975/965 Chipset-boards which where released in 2006.
When you say that your installation works fine on your old PC I believe you. It worked on my old Laptop too. However I was not able to install XP Pro on my 975X-board without SP2 at all until I upgraded my Installation CD.
Quote
Garfield,
I had exactly the same problem--because I had my optical drive hooked up to a Promise IDE controller, rather than to a mobo IDE connection. Turns out the Promise will read and write the optical drives OK, just won't boot from them properly. And, somehow, that affects Windows Setup.
I don't know anything about the JMicron and the need for SP2. But, as you can see from my sig, I'm using XP Pro SP1, and once I moved my NEC 3500 back to the mobo IDE (as secondary behind my IDE hard disk) everything worked like a champ.
Just my $.02.
Stahlwird
To relate Garfields problem with your solution is a mistake. Your board does not use any JMicron hardware, has NVidia chipset instead of Intel and an AMD CPU. Your are talking about a totally different Setup here.

My Macbook Pro will not install/restart for updates when I use Software Update

So when I go into System Preferences and go to Software Update, I click the Check Now Button. It looks for available updates, and gives me a box that says "Software updates for your computer are ready to be installed. Do you want to install them now?" with options to "Show Details", "Not Now", and "Install and Restart". However, when I hit the install and restart button, after hitting a few confirmations, the app simply logs me out, but doesn't restart the computer. When I restart the computer from the Log In screen, the computer reboots without installing any of the updates. I'm on Snow Leopard, is that why updates aren't installing? Am I going to have to manually download all of the updates, or at least that updates that are compatible with Snow Leopard?

There are no updates for Snow Leopard except to Mountain Lion.
Upgrading to Snow Leopard, Lion, or Mountain Lion
You can upgrade to Mountain Lion from Lion or directly from Snow Leopard. Mountain Lion can be downloaded from the Mac App Store for $19.99. To access the App Store you must have Snow Leopard 10.6.6 or later installed.
Upgrading to Snow Leopard
You must purchase Snow Leopard through the Apple Store: Mac OS X 10.6 Snow Leopard - Apple Store (U.S.). The price is $19.99 plus tax. You will be sent physical media by mail after placing your order.
After you install Snow Leopard you will have to download and install the Mac OS X 10.6.8 Update Combo v1.1 to update Snow Leopard to 10.6.8 and give you access to the App Store. Access to the App Store enables you to download Mountain Lion if your computer meets the requirements.
     Snow Leopard General Requirements
       1. Mac computer with an Intel processor
       2. 1GB of memory
       3. 5GB of available disk space
       4. DVD drive for installation
       5. Some features require a compatible Internet service provider;
           fees may apply.
       6. Some features require Apple’s MobileMe service; fees and
           terms apply.
Upgrading to Lion
If your computer does not meet the requirements to install Mountain Lion, it may still meet the requirements to install Lion.
You can purchase Lion by contacting Customer Service: Contacting Apple for support and service - this includes international calling numbers. The cost is $19.99 (as it was before) plus tax. It's a download. You will get an email containing a redemption code that you then use at the Mac App Store to download Lion. Save a copy of that installer to your Downloads folder because the installer deletes itself at the end of the installation.
     Lion System Requirements
       1. Mac computer with an Intel Core 2 Duo, Core i3, Core i5, Core i7,
           or Xeon processor
       2. 2GB of memory
       3. OS X v10.6.6 or later (v10.6.8 recommended)
       4. 7GB of available space
       5. Some features require an Apple ID; terms apply.
Upgrading to Mountain Lion
To upgrade to Mountain Lion you must have Snow Leopard 10.6.8 or Lion installed. Purchase and download Mountain Lion from the App Store. Sign in using your Apple ID. Mountain Lion is $19.99 plus tax. The file is quite large, over 4 GBs, so allow some time to download. It would be preferable to use Ethernet because it is nearly four times faster than wireless.
     OS X Mountain Lion - System Requirements
       Macs that can be upgraded to OS X Mountain Lion
         1. iMac (Mid 2007 or newer)
         2. MacBook (Late 2008 Aluminum, or Early 2009 or newer)
         3. MacBook Pro (Mid/Late 2007 or newer)
         4. MacBook Air (Late 2008 or newer)
         5. Mac mini (Early 2009 or newer)
         6. Mac Pro (Early 2008 or newer)
         7. Xserve (Early 2009)
     Are my applications compatible?
         See App Compatibility Table - RoaringApps.
     Am I eligible for the free upgrade?
         See Apple - Free OS X Mountain Lion upgrade Program.
     For a complete How-To introduction from Apple see Upgrade to OS X Mountain Lion.

My MacBook Pro will not install OS X Mountain Lion

I decided to wipe my macbook pro's hard drive. Once I did, I had to re-install OS X Mountain Lion. Well, it asked me for my Apple ID and Password. When I enter it, my computer says "This item is temporarily unavailable. Try again later." I've heard of other people having this issue and I have not seen a resolution to this issue. How do I install OS X Mountain Lion?

Sorry, if I sound silly on this next question, or string of questions, but:
What does EFI stand for?
Is it an acronym for something?
I thought that my MacPro is 64bit? Well that is as far as I remember the salesman telling me, back when I did the B.T.O spec.
I am running 64bit apps [in full 64bit mode] as far as I understand. Like the CS suiite.
If I look at "About Photoshop…" it says — Version 12.1 x64
Doesn't that mean that it is running 64bit apps?
Or are you saysing that the "entire operating system" / "bios" or whatever it is called in Mac language, is not actually capable of running as 64bit?
I need to find my box, that came with the MacPro, ans just have a look at the info that is detailed on it. As as far as I can remember there was even a big "64bit" flashy thing, somewhere on the outside of the box.
But in the meantime, if you can perhaps help with the earlier questions.
And perhaps one more …
Where woudl I find the info / persons that I could investigate that "Hack", as I may need to investigate that a little. If anything just to be better informed, for the future. At the end of the day, if I have to scrub the entire Mac to the beginging, and reload everything, so be it, at least it will be a learning curve in the process.
I have all the legal software installers etc, so all that it will cost me is time, if it does "kill" the operating system …

Acrobat 7 Pro will not install from Adobe download 22020134.exe

I run Windows XP. I uninstalled my copy of Adobe 7 Pro to transfer it to another computer. I successfully installed the download provided by Adobe (which replaces original disks) on the other computer. I found I was having general problems with this computer (nothing to do with Adobe) and decided to uninstall Adobe 7 Pro and reinstall it on my original computer. So far it has failed to install and I get the message: Setup has detected that you already have a more functional product installed. Setup will now terminate.
I have removed all Adobe products from my computer other than Photoshop elements.
Has anyone any ideas as to what I can try next. Anyone's help would be much appreciated.

Run http://labs.adobe.com/downloads/acrobatcleaner.html and remove any left over parts of the Acrobat folder you had before. Then reboot and install. You may still have some issues with the install since the activation no longer works with AA7. If this is the case, then check http://forums.adobe.com/thread/1287524.

QT Pro will not install

Similar Messages

Maybe you are looking for