QT screen cap errors w/Mavericks

Ok so this isn't cool. Quicktime 10.3 (727.1) has two issues:
1. Screen capture will not engage. You can launch it and see the red button. But clicking it will not activate the screen selection options.
2. If there are video clips open in QT, you can not close out of them or use command-w to close them. There aren't any small colored buttons at the top right that allow you to "x" out or minimize.
3. Any video open will also not allow you to grab any corner to move or minimize the clip. Your mouse goes through them. You have to click/hold the center of a clip to move it. Resize is available though.
Weird. Anyone else seeing these problems?

earth to apple, any comments?

Similar Messages

Off Topic/Humor: Send screen caps of Oracle Errors

Send us your screen caps of interesting, funny, strange Oracle DBMS error messages.
We'll post them at [http://www.ora-fail.com]
Email them to [email protected]
Thanks!

Oracle error messages are known and published.
Why don't you just go through them all and select the ones that amuse you.

My macbook13in has a blue screen with error code 10813

my macbook 13in has a blue screen with error code 10813

Reinstalling OS X Without Erasing the Drive
Boot to the Recovery HD: Restart the computer and after the chime press and hold down the COMMAND and R keys until the menu screen appears. Alternatively, restart the computer and after the chime press and hold down the OPTION key until the boot manager screen appears. Select the Recovery HD and click on the downward pointing arrow button.
Repair the Hard Drive and Permissions: Upon startup select Disk Utility from the main menu. Repair the Hard Drive and Permissions as follows.
When the recovery menu appears select Disk Utility. After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the main menu.
Reinstall OS X: Select Reinstall OS X and click on the Continue button.
Note: You will need an active Internet connection. I suggest using Ethernet if possible because it is three times faster than wireless.
Also see:
Reinstall OS X Without Erasing the Drive
OS X Yosemite- Reinstall OS X
OS X Mavericks- Reinstall OS X
OS X Mountain Lion- Reinstall OS X
OS X Lion- Reinstall Mac OS X
Note: You will need an active Internet connection. I suggest using Ethernet
if possible because it is three times faster than wireless.

Project keeps crashing. I have a screen cap, what do I do?

Hi.
I have a premeire project that keeps crashing. I've included a screen cap.
I had an issue with my dynamic link and audition, we fixed it over the phone by installing and uninstalling but I've had nothing but problems since.
this latest project has a dynamic link going and it kinda lets me work in it but I get this error popping up all the time and its jacked up. I'm having trouble moving layers.
so.

I guess its an error, as the program isn't blowing up in my face but this project is shot. this warning box comes up constantly.
I'm having a bunch of problems since getting a dynamic link issue fixed with adobe tech support. I need to reinstall again maybe..
I don't know who to call though. the phone support can be so horrible and eat up your whole day.

Blank Screen; Caps lock Blink Twice Every 2/3 Seconds with orange wireless button.

Hi,
I am using my HP Pavilion DV6 7023tx laptop. It is 1 year 3 months older(warrenty expired). It was working fine but one evening i found it start with black screen and caps lock blink twich every 2/3 seconds and after some times it's getting hot.
I have tried to solve the issue accoroding to the following link
http://h10025.www1.hp.com/ewfrf/wc/document?cc=us&lc=en&dlc=en&docname=c01732674
It looks like BIOS corruption failure. but it will not automatically recovering that mentioned in post.
So what should i do now?
Could you guys tell me what should i do?
Thanks in advance.
Product Information:
===============
HP Pavilion DV6 7023tx
Serial No : 2CE22927FG
Product ID: B3J66PA
This question was solved.
View Solution.

Hello SuperMario1,
Thanks for your response.
The last thing i did, remove CMOS battery and after a few minutes i plugged it.
Then connect AC power adapter and press power button.
Laptop starts but gives a error message
"The CMOS checksum is invalid, The BIOS will be reset to the default configuration and will be rebooted."
Finally laptop start normally. It works fine ...
But same problem when i restart
"blank screen caps lock blink 2 times every 3/4 sec"
So finally
1. remove CMOS battery and after a few minutes i plugged it again
2. connect AC power adapter and press power button
3. laptops starts normally (with a error msg same as previous)
4. Upgrade bios to F.29(previously i had F.24)
5. Everythings works fine (restart/shutdown have no effect)
Nirupam Chandra Modak

Pavilion dv6 blank screen caps lock light on blinking F11 F12 light on (red)

pavilion dv6 blank screen caps lock light on blinking F11 F12 light on (red)

Hello kiranreddy,
Welcome to the HP Forums.
It appears that your Notebook is not starting, that you have a blank screen and flashing LED's. I will try to help you with this.
I would like you to start with this document: Computer Does Not Start and the LEDs Blink or the Computer Beeps. This will help to try to identify if the Notebook is providing an error code. If it is, it will also provide steps to attempt to resolve the issue.
Please let me know how you make out with this. If you require further assistance with this please provide the Model and Product numbers for your Notebook. (How Do I Find My Model Number or Product Number?)
Thank you for posting on the HP Forums.
I worked on behalf of HP.

When i try to open photoshop this shows up Please uninstall and reinstall the product. If this problem still occurs, please contact Adobe technical support for help, and mention the error code shown at the bottom of this screen. Error: 16

i had to take my photoshop file into a hardrive because my dad was going to give me a new Mac and when things didn't work out and went back to my old one i use the time capsule thing to save everything before but didn't give me photoshop so i physically moved the file and tried to open it but then this error shows up
Please uninstall and reinstall the product.
If this problem still occurs, please contact Adobe technical support for help, and mention the error code shown at the bottom of this screen.
Error: 16
and when i click the uninstall app on the file it tells me this
The alias “Uninstall Adobe Photoshop CS6 2” can’t be opened because the original item can’t be found
and when i click fix alias i click on photoshop and the app just turns into photoshop and i just run in circles
please help thank you

Run the cleaner tool and reinstall.
Use the CC Cleaner Tool to solve installation problems | CC, CS3-CS6
Download CS6 products
Mylenium

Blue screen with error code and I have no recovery disks for HP Pavilion dv6-1260se

I have a HP Pavilion dv6-1260se with factory installed operating system of Vista. When booting up the computer, I receive a blue screen with this error message: STOP: c000021a {Fatal System Error}.
                                                            The verification of a KnownDLL failed. system process terminated unexpectedly with
                                                             a status of 0x0000221 (0x007fb9c0 0x00000000).
                                                             The system has been shut down.
I do not have recovery disks for this computer. I tried to order them but them seem to not be available. This is my daughter's computer. She says she started to have trouble after downloading Frost Wire (music share) and then she removed it. We tried going back to an earlier time and that didn't help and then the blue screen with error message appeared. What do I do now?
This question was solved.
View Solution.

Hi,
Assuming your in the US, recovery discs are available to order for that model here. That may be the best option.
You should also be able to do a recovery without the discs as well. Take a look at this document: Recover Windows Vista Operating System Using HP Recovery, and look for the section Restore the PC to its original condition with the HP Recovery Manager if Windows Vista is not accessible. This should allow you to recover the PC.
R
Although I am an HP Employee, I am speaking for myself and not for HP.

Restarting After a Blue Screen Stop Error

I have received a Blue Screen Stop Error on my Toshiba Satellite 5200 Series laptop.
I could report it here, in full, if that would be helpful. However, it begins by telling me to restart the machine but the unit's Power button is not allowing me to switch it off.
What action should I take ?

Crikey ! Someone at another forum just told me to hold the button down for 5 seconds..... and it worked !

Satellite A350 - Blue screen with error message

When starting windows7, I am getting blue screen with error message 0x0000116.
Can anyone assist please?

It looks like a graphic card driver is a trouble maker.Try to reinstall a graphic card driver in safe mode (f8 on startup). Read this article for information:
http://social.answers.microsoft.com/Forums/en-US/vistahardware/thread/eb584685-6b8b-4ad7-b6cc-ae5ee78095fb
It's for VISTA but should be the same for win 7 too.

Blue screen fatal error messages - laptop always crashes and now won't even let me restore

My dv6920ea laptop has developed a fault and keeps crashing with blue screen errors, such as "IRQL_NOT_LESS_OR_EQUAL". The problem has become so bad that it happens everytime I turn the laptop on. The laptop ran "Windows memory diagnostic tool" which said that there was a hardware fault. I've tried running a full system recovery to factory setting but sometimes the laptop crashes, and when it doesn't it asks me to insert a windows disc, but my laptop didn't come with one. The laptop is a year and a half old. What can I do to fix this issue? I don't mind completely recovering the laptop to factory settings and I have most(!) of my files backed up.

Hello djbless,
You’re getting blue screens with error IRQL_NOT_LESS_OR_EQUAL.
Run diagnostics to make sure that you are not having a problem with any of the hardware.
Turn off the computer.
As you power it back on tap the F2 key. This will load hardware diagnostics.
Run the startup test.
Go to HP.com and update the drivers, there is a button that says Let HP scan your system for out-of-date and missing drivers and software
Here is a link to the updates.
Clicking the White Kudos star on the left is a way to say Thanks!
Let me know how everything goes.
Have a good day.

Blue screen with error message

Product Name: HP Media Center M7250n Desktop PC
Product #ED842aa-aba
I have been getting a blue screen with error messages that ask if this is the first time i get the error and then at the end it says it is dumping memory. I would like to wipe my harddrive and reinstall XP but my system is out of warrenty and HP won't provide me a recovery CD. What are my options.
This question was solved.
View Solution.

Hi,
You are most welcome.
"I work for HP."
Please click the "White Kudos" star to say thanks for helping.
Please mark "Accept As Solution" if my help has solved your problem.

Hp g6-1278sa get blue screen and error message when trying to load xp pro

I have setup a new 500gb toshiba SATA 2 harddrive to run daul boot.
Windows XP pro 32bit and windows 64bit.
Unable to install XP pro, just goes into error and blue screen.
Ive removed the harddrive and placed it in my Packard Bell, loaded XP pro 32bit and win 8 64bit with no problem, and both run fine.
Removed the harddrive from the packard bell laptop and place it back into the HP g6-1278sa, daul boot screen on start up.
Opptions windows 8 or earlyer windows.
Windows 8 works fine.
Windows XP pro starts to load and then we get the blue screen with error message.

Hi Powlers
Ok read this tutorial ( link below ) in how to install XP within Windows 8 OR running Virtual Machine
  http://www.howtogeek.com/171395/how-to-get-windows-xp-mode-on-windows-8/
  OR
  http://www.fixedbyvonnie.com/2014/03/legally-install-windows-xp-free-windows-8-using-virtualbox/
Quick question :: What operating system was your machine shipped with initially ??? Windows 7 ???
Checkurtech
****Click the White Kudos star to say thanks****
****Please mark Accept As Solution if it solves your problem****

Time machine backup error in Mavericks

I"m getting backup errors in Mavericks when it tries to back up to the Backups.backupdb folder in my 3TB external backup drive. This happens even when I turn Time Machine off!
This is the error I'm getting (taken from the console) when I manually start a time machine backup:
10/26/13 9:56:39.268 AM com.apple.backupd[18160]: Starting manual backup
10/26/13 9:56:40.826 AM com.apple.backupd[18160]: Backing up to /dev/disk2s2: /Volumes/Macbook Pro Backup 3TB/Backups.backupdb
10/26/13 9:56:46.069 AM com.apple.backupd[18160]: Error: (22) setxattr for key:com.apple.backupd.HostUUID path:/Volumes/Macbook Pro Backup 3TB/Backups.backupdb/Macbook Pro 25 size:37
10/26/13 9:56:46.070 AM com.apple.backupd[18160]: Backup failed with error 2: 2
Has anyone seen this? At this point, I haven't been able to back up anything after upgrading to Mavericks, and I really don't want to delete the backup folder and start over.
I thought it might be a permissions problem, so I tried to use the disk utility to verify this. I wasn't able to select verify or repair disk permissions. When I tried to verify the disk, I got a 'Live file system repair is not supported' error. I've never seen this before.
Any thoughts on all of this?

I fixed this by hard booting, then repairing the disk. A restart didn't work.

Screen-caps - A Photoshop Workflow

Users often ask how to do screen-caps, to show what is happening with their program. Below are possible workflows for creating the screen-caps, and then there are instructions on how to "attach" the screen-caps to a Reply in the Adobe Forums, but only if one is accessing them via a Web browser - with e-mail access, you cannot attach a screen-cap, or other image file. There are first several utilities that will help you do this, but I will outline the steps using Adobe Photoshop and the Windows Clipboard. One can substitute their image editing program of choice, such as Photoshop Elements, PaintShop Pro, or other.
Windows has a Clipboard feature, and one can use the Print Screen key (often seen as Prt Sc, etc., and depending on their computer, might have to also use a modifier key, such as the Ctrl key).
First, set up your program, so that the necessary items are shown. This might be zooming in on the Timeline, even expanding it vertically, moving the CTI (Current Time Indicator with the red Edit Line attached), and perhaps selecting a problem Clip. Often, the Program Monitor will also need to be seen, and perhaps the Project Panel showing the proper Asset, or maybe the Effects Control Panel. Get these setup, so that they are visible, and where you want them. Now, hit the Print Screen key (see above for comments). The screen will now be an image in Clipboard.
Open your image editing program. Here, I’m using Photoshop. Create a New Image. Photoshop will first look in the Clipboard, and if there is an image there, will even set up your New Image to match that w/ the proper pixel x pixel size. Here, I name that New Image with a name that means something to me, like, “PrE_Audio_Mixer_01.” I use the underscore, in lieu of spaces, as the forum software sometimes has problems with file names containing spaces. Yes, I know that this is so Windows 98, but it works well for me.
Hit Ctrl+V to Paste the image from the Clipboard into this New Image. If my full screen-cap has captured more image area, than I need, I Crop to the important parts.
Next, if I need to do call outs, or annotate the image, I use the Text Too, and maybe will draw boxes, or circles, to make sure that the viewer knows exactly where I want them to look and what to look for. To draw arrows, or lines, I use the Shape Tool, and/or the Pen Tool, and Stroke, or Fill these Paths, as is necessary.
At this point, I have a Layered file with drawings and text, overlaying my screen image. I will do a Save_As and choose .PSD to keep my Layers handy for any additional editing, if necessary. The one problem is that the Adobe forum will NOT attach a .PSD file. Here, one has several choices. One is to do a Save_for_Web, and let PS Flatten the Layers, and merge them into one Layer. That will also remove any Alpha Channels, and/or Paths. Two popular formats are .PNG, or JPEG, and Save_for_Web allows for either of these. The choice is yours, but I normally just use JPEG with a Quality of about 9, in Photoshop to compress the image, but still leave it sharp enough for others to read. Again, PNG is a good choice as well, and will yield slightly better quality for the file size. Only possible issue is that many older browsers (what the viewers will be using to view the screen-cap) do not handle PNG. All newer browsers do, and do so very well. I have begun using PNG, instead of any compression of JPEG, and the results are better, and sharper.
With the screen-cap image Saved to our HDD, I use the little “camera” icon, in the lower-middle of the Adobe Forum editing screen’s Toolbar, to actually attach the image:
Here is an example of a screen-cap with the program setup as I needed, call outs and annotations:
Hope that this helps. Note: other image editing programs will differ, as will various screen-cap utilities.
Good luck,
Hunt

Neale,
Thanks for that. I had never used Alt+Prt Scr on my Sager, and did not know of the specifics of that modifier key. On my laptop, I need to do Ctrl+Prt Scr, rather than the more common Prt Scr (no modifier key), but that is fairly specific to my Sager on the Clevo MoBo, with its keyboard. On many computers, just plain Prt Scr is all that's needed.
I'll experiment with Alt+Prt Scr, as that might actually save me a Crop in PS, when doing a screen-cap.
Thanks,
Hunt

QT screen cap errors w/Mavericks

Similar Messages

Maybe you are looking for