QT trouble with Cleaner 6 mpegs

After updating to QT 7.1.2, I am having trouble playing back mpeg files created with Cleaner 6 (v. 6.0.1). I can watch and hear the first few seconds, but when I click on another point in the timeline or drag the playhead to another point the screen turns black and I get the beachball. However, mpeg files created with Compressor work without any problems but I prefer the Cleaner 6 mpegs because the quality is much better. Is anyone else having the same trouble? I'm not sure whether I should try and revert to the previous version of QT 7 (before the update) to see if this solves the problem.
PowerMac Dual800 Mac OS X (10.3.9)

Hi Byron,
Welcome to the forum.
I take you have experimented with the filters in compressor!
My suggestion would be to do the slow mo work in something like FCP and get the uncompressed quicktime file the way you like it. Then encode using Compressor.
Cleaners mpegs have always been of poor quality (visually that is). I am surprisedd that its output is not MP@ML though.

Similar Messages

I have been having trouble with inserting pages in a document in indesign

having trouble with inserting pages in a document in indesign

You're going to give us more information for us to help you.
What operating system? What version of InDesign? What happens when you insert a page (and how are you choosing to insert a page)? Does it happen with just one file, or does also happen on a clean new file?

Trouble With Opening InDesign and now Photoshop and Illustrator

First off I apologize if this isn't in the correct section. I couldn't find a section specific to my problem since it involves multiple aspects of Adobe products. I was having trouble with InDesign, it kept crashing. So I followed all of the advice I could find on the forums about deleting the preferences and cache information in the Library folder, and that didn't seem to make a difference. So then I thought maybe it needed an update, so I logged into Adobe Application Manager and sure enough, it did. So I clicked on "download" and it stalled there too. Then the manager became unresponsive. I couldn't cancel the update or log out or anything. So then I saw in the forum someone suggested the Adobe Creative Cloud Cleaner Tool if your manager becomes unresponsive. I ran that and then shut my computer off. When I turned it back on, InDesign started working BUT my Photoshop is completely gone from my system (I never messed with it in the first place since I wasn't having any trouble with it.) And the when I tried to click on Illustrator it said "Do you want to begin your trial?" Huh?
I have had a subscription since 2012, why on earth would it suddenly think that I no longer should have access to these programs? If I log on to my Adobe account it shows my subscription and that it's up to date (last payment was April 5, 2015). The versions I was using were the CS versions that I had downloaded directly from Adobe and when I used to have any trouble or when I got a different computer I could just log into my account and then redownload them. They are no longer showing under my products, so I can't figure out what on earth is going on. The website has changed since the last time I downloaded them, so that partly could be me, but I thought they would at least be showing up under products. I contacted Adobe support and the first person I talked to on chat said "this is clearly a technical issue I am transferring you to someone better suited for this," but that's all he said. And I haven't heard from anyone since so I thought I'd make a topic and see if anyone else out there has had a similar problem.

The versions I am using are the CS6 versions.*

Trouble with updating apps

Having trouble with updating some of my apps. You Tube esp.

Apps are tied to the account that downloaded the apps, not to the device that they are on, so any apps that your son downloaded can only be updated via his account and vice versa.
You can sign in and out of accounts via Settings > Store and tapping the account on the right-hand side. If you no longer use the apps that your son downloaded then you could delete them (or if they are free apps you could delete and then download them under you account) - you could always reset to factory settings (Settings > General > Reset > Erase All Content And Setting) and reload just your apps from scratch (apps can be re-downloaded for free : http://support.apple.com/kb/HT2519), which is a 'cleaner' way of doing it

HT1926 Started having trouble with iTunes so I uninstalled everything and tried to reinstall but it says ' iTunes cannot run because some of its required files are missing. Please reinstall iTunes.' Well, I've uninstalled and reinstalled 5 times. Now wh

Started having trouble with iTunes so I uninstalled everything and tried to reinstall but it says ' iTunes cannot run because some of its required files are missing. Please reinstall iTunes.' Well, I've uninstalled and reinstalled 5 times. Now what?

I figured it out. A week ago I had downloaded a screensaver from a website I trusted and that's when my problems started. I uninstalled it but that didn't help. So, I reinstalled it then used an uninstall softtware app that cleanns more than the control panel does. Then I used a computer cleaner to be sure everything was wiped clean. And it worked. I downloded iTunes for the 7th time in 2 days and finally it worked! And I lost nothing from my account.
Maybe this info will help others.

Networking troubles with ABIT BP6 board and Solaris 8

Hi, Im trying to install the Solaris 8 software on my ABIT BP6 board with a Compaq NetFlex3 10TX NIC. This is a SMP board (dual celeron) but is not on the HCL (the NIC is).
The installation gives no problems at all (except for a memory conflict between memory devices), and SunOS works pretty well except for networking... using ifconfig -a shows me the networking interface and the loopback interface but I can't ping outside of the Solaris machine (or ping to the Solaris machine from an other machine).
I know that the board is not on the HCL but I had no networking troubles with Solaris 8 early access.
After instalation of the software and the reboot, I get the status as below:
>
configuring IPv4 interfaces: cnft0.
Hostname: MILLIWAYS
Configuring /dev and /devices
Configuring the /dev directory (compatibility devices)
The system is coming up. Please wait.
checking ufs filesystems
/dev/rdsk/c0d0s7: is clean.
All devices are configured...
Configuring network interface addresses: cnft0.
RPC: Timed out
Starting IPv4 routing deamon.
starting rpc services: rpcbind done.
Setting netmask of cnft0 to 255.255.255.0
<
As you can see I get a time out while configuring the NIC. I tried a lot of different things (and some bad ones like using the device driver disk of the EA version with the cd's of the final version but no luck there...)
Anyone with the same problems or any help?
Thanx, Marcel

Hi maeck,
I'm sorry that my message is off the topic. Could you help me with a problem that I have with Abit BP6 + Solaris 8 combo?
I'm encountering error message on console screen during booting/reboot/shutting down like "APIC error interrupt on CPU 0. Status=2" where CPU can be 0 or 1, status can be 0, 2, 4 or 6.
If I let my dual Celeron400 run at 400MHz, the frequency of errors is few and far between. Though it still happens. If I overclock them to 558MHz like I udually do, it will show at least 4 times during a booting process. I've tried MPS 1.1 and 1.4 settings. I've also tried turning off all cache, delayed transaction, passive release settings.
In addition, the overclocked system tends to lock up while it runs flawless in Windows 2000 Professional and Redhat 6.1. Do you have any similar experience?
My system config:
Abit BP6 motherboard
400 MHz CPU X 2
GlobalWin FEP32 X 2
128M SDRAM
Creative Labs 3DBlaster TNT2
13GB Maxtor DiamondPlus 6800
Acer 10x DVD drive

Satellite L755-16J - Trouble with sound card

I currently own a Toshiba *Satellite L755-16J* and it is having some sort of trouble with the sound card, i think.
When i bought it, it came with windows 7, i changed the windows to windows 8 and since then the audio has been troubling me.
The internal speakers work for a minute or two when i play an audio file but then stop working.
i had been using an external usb soundcard and external speakers for some time but decided to switchback to windows 7 for the sound to work properly again. even though i have switched back to win 7, the sound still doesnt work.
I am quite sure that the problem is not in the internal speakers because they do work, although just for a brief moment but they work, so i am guessing the problem is in the software instead of the hardware.
i tried updating the sound drivers but they seem to be up to date, according to windows the drivers "seem to be working properly"
Can anyone help?

> even though i have switched back to win 7, the sound still doesnt work.
How did you do that?
Did you use the Toshiba Recovery Disk in order to install Win 7 or did you install the Win 7 using fresh and clean Windows 7 disk?
The notebook supports Conexant sound chip. The sound driver is available on the Toshiba EU driver page and in case the sound chip is already recognized in device manager after the sound driver installation, I assume the driver has been installed properly.
In such case I would recommend you to connect the headphones.
In case the headphones would function properly, the speakers might be affected. I mean the hardware. But of course its only an idea.
Beside the headphone check, you could check also the settings within the control panel -> sound -> playback tab.
Usually the speakers should be set as default device.
Check this option too.

Having trouble with fm transmitter

i have a 2gb 1st gen nano and use an extrememac airplay2 transmitter in my car
i've been having trouble with the connection - it will sometimes only transmit through the right speaker, or it will be working fine and it will suddenly kick off and i get a blast of static (i.e. what would be coming through the radio if the ipod wasn't playing at all). gives me a coronary, every time.
picking up the entire assembly and jiggling things a bit clears it up, though, which makes me think that i've got a dirty or damaged connection between the ipod and the transmitter...so, first things first - if i wanted to clean the 'dock' part of the nano, how would i do that? safely?
has anyone else had this problem?

how much did you spend on this fm transmitter? my experence is that if you pay less than $80 its junk.. if i were to clean out the "dock" portion of an ipod i would use an air gun/bottle.. I dont know if its safe or not but its what i would try. i have been through an itrip and one other cheap fm transmitter and i had the same issues as you had..
good luck.

I am postin a message but no one seems to answer it . Plse I am having trouble with adobe 5 and I wr

I am hjaving trouble with adobe 5 not compatable with my computer so how do I get rid of it and up grade to a newer verson, hopfully a free one

There is no application named Adobe 5, so you might have to provide the correct name for the application. If it happens to be Creative Suite 5 (CS5) there is a good chance it is compatible with your computer but you might have to install it in a compatibility mode. If you want to remove it you should first deactivate it. YOu might also do well to use the Creative Suite Cleaner Tool...
Adobe Creative Suite Cleaner Tool
helps resolve installation problems for CS3 thru CS6 and for Creative Cloud
http://www.adobe.com/support/contact/cscleanertool.html
As far as I know there are no free upgrades, especially if the reason would be lack of compatibility. It might be true if you were to have purchased one version when the next version was just about to be released, but CS5 is well beyond being considered for that. Software is not freely upgraded to match newer machines - that's part of life.
Just in case... if the lack of compatibility is due to your machine not meeting the tech specs of CS5, then it will most likely be true that your machine does not meet the tech specs of anything newer than that.

I`m having trouble with my new advanced system the mac os X 10.0.3

Hello everybody...
I need Help, I would appreciated anything anybody could do to help me...
I`m trying to install the new software the mac os X 10.0.3 and having trouble transfering all my files form the mac os 9.2.2 classic to my new system...Do i have to erase my hard drive to do a clean install???? Could I transfer my files to my home`s computer, instead of buying a portable smartdisk hard drive of 100 Gb, and then so i could transfer my fiels back to my mac without no trouble ????
I Hope anyone could answer to my post as soon as possible, Thanks

Hi, John. If you weren't having trouble with Mac OS 10.0.3, it would be a major surprise. OS X 10.0.x and 10.1.x were unusable beta versions and never should have been released, in the view of most people who ever tried to run them. It would be a severe trial of your patience and a waste of your time to install 10.0.3 on your Mac.
If you want to run OS X, buy OS X 10.2.x (Jaguar), 10.3.x (Panther) or the current version, 10.4 (Tiger). All are available at reasonable prices from AppleRescue. Tiger is also available from any Apple retailer. Carefully read the system requirements for whichever version you prefer, and be sure your computer meets them before buying. If your Powerbook only has a 10GB hard drive, install a larger one (at least 40GB is sensible, since the cost per gigabyte of smaller drives is now exorbitant compared with larger units) before bothering to install OS X.
It would be most advisable to copy everything on your current hard drive to an external FireWire hard drive, then reformat and erase the internal drive before installing OS X on it. Doing so insures that your data is all safe and that your internal drive is in tip-top condition when the new OS is installed. After performing the installation, you can copy the contents of the external drive back onto the internal drive. The external drive will then be available as backup space for the entire contents of the internal drive, including OS X, all your applications, and all your data.
While OS 9 is still installed on your hard drive, check to make sure your Powerbook's firmware is up to date. It will need to be brought up to date while running OS 9, before you install OS X 10.2 or higher. Here is the updater for your 500MHz Tibook:
http://docs.info.apple.com/article.html?artnum=75132
If the firmware has already been updated, running the updater again will tell you so and will do no harm.

Im having trouble with FF & Youtube; it wont play videoes

i'm having trouble with FF; Youtube videos dont play, just a black screen ? ; they play ok on Google Chrome; BBC news videos play ok with FF. I have upgraded Adobe Flash no look, reverted to previous, no luck. I'm running Windows 7, on a DELL Inspiron with terraflops of memory and no system bugs, clean as a whistle.
FF is my default browser. The mouse-over previews play? Sometime for fractions of second videos try to play, then revert to black screen.

http://support.apple.com/kb/TS1538
There have been some problems accessing pages on the Apple web site. If the hyperlink gives you a "We're sorry" message, try again.

Im having trouble with my zen microph

<FONT face="Comic Sans MS" color=#336600 size=4>Im having trouble with my new Zen Microphoto. I turned it on a couple days ago and it froze at the startup screen, and it just says creative on the screen, and you can't do anything about it. I read the faqs and product help stuff that told me to go to recovery mode and select something like clean files. I did that and it says "Scan Disk...". Ive been waiting for like 8 hours, and i need help. I have like 800 songs, so im wondering if that's the reason it is taking so long. Well if you can help me i would greatly appreciate it.

I didn't have this issue with my new ZMP but if you are using it for the very first time and this happens, bring it back to the store and get a replacement. Test it out directly at the store to avoid anymore troublesome issues.

I am having trouble with sound on my iPad

I am having trouble with sound on my iPad

Found the fix.
If the reboot doesn't fix it.
If the headphoens work find, but no external speakers.
If the double-click and page right to the software mute, doesn't show the sound knob - just the brightness
If your pop-up shows "Docking Station"
Then, the problem is very likely a dirty connector. The iPad/iPhone/iPod connector uses a resistor value to determine if the device is connected to an external 'speaker'. There are a range of resistances, for a range of products. This is known as the Connector Pin 21 issue.
Take some windex on a que-tip, or perhaps a Windex paper scrub and rub it on the bottom connector port. Somehow, "something" has gotten on those contacts, and it is pulling the voltage on pin #21 down - so that the iPad "thinks" it's connected to an external speaker - this will disable the internal speaker circuitry, as well as the internal speaker volume controls.
Do not over-saturate and short out your iPad. Do not throw it in the sink, do not use the kitchen faucet to flush it out. A Que-tip with a few drops of Windex (or other gentle cleaner) should work just fine. Takes all of 30 seconds - and magically, the volume knob appeared and everything worked just fine.

Trouble with flickering after converting AVCHD files to Apple Pro Res 22

Hi guys.
I have figured out that Apple Pro res 22 is the best format for my AVCHD files.
But I am having trouble with the files after converting them to this format.
Every 60 frames I have a blurred frame.
This results in a flickering effect when watching the clip.
The original MP4 clip (AVCHD) plays fine on the Mac but when I convert is it flickers.
I have captured a still shot of the frame here
http://www.willpower.net.au/DOWNLOADS/FrameError.jpeg
Here are the settings I am using for the conversion
http://www.willpower.net.au/DOWNLOADS/Error.JPG
Here is the converted file in Apple Pro Res 22 format with the flickering
http://www.willpower.net.au/DOWNLOADS/SANY0007.mov
I'd appreciate any help that you can offer.

Actually I think I might have found the answer.
After diggin deaper into the camera manual I have discovered that the setting I had it on "Full HD" actually is interlaced not progressive. Even though tha badging on the camera says Progressive"
So I think something got lost when converting the files to apple pro res.
I just shot a 10 sec clip on "Full HR" which is the progressive function and it converted nicely.
I'll come back to this post after shooting and making a little test movie today.
Thanks for your help.
PS. I wonder what codec it actually shoots in. Apparently it is not AVCHD but MPEG-4 AVC/H.264 compression (I thought that was AVCHD)

Constant crashing with Snow Leopard, even with "clean install"

I've had a lot of trouble with crashes after installing SL. These crashes seem related to video issues. iMovie crashes immediately. iPhoto crashes if I double-click a photo. QuickTime crashes all the time. Usually these crash the entire system. The video of my entire screen sometimes get broken and jittery just before such a system crash. I've also had the crash where the screen becomes gray and I'm told to restart in many languages.
Anyway, I finally erased my disk and "clean installed" SL, updated it to 10.6.5, then installed iLife 11 and updated that. iMovie immediately crashed. Does this confirm a hardware error, or are there some hidden settings (like in the PRAM) that can be wrong and are carried over even through a clean install? If so, how do I restore these to the factory defaults?
Message was edited by: Stuart Field

Stuart Field wrote:
I've also had the crash where the screen becomes gray and I'm told to restart in many languages.
Those are "kernel panics," which are usually hardware-related.
Start with this: [Intel-based Macs: Using Apple Hardware Test|http://support.apple.com/kb/HT1509].
and the (free) Rember, a heavy-duty memory tester, from: http://www.kelleycomputing.net/
If nothing there helps, see this Apple article: [If “You need to restart your computer” appears|http://docs.info.apple.com/article.html?path=Mac/10.6/en/8965.html].
More kernel panic info:
Apple Support - About kernel panic messages
Mac OS X Kernel Panic FAQ
The X Lab - Resolving Kernel Panics
Apple Developer - Technical Note TN2063: Understanding and Debugging Kernel Panics
Tutorial: Avoiding and eliminating Kernel panics

QT trouble with Cleaner 6 mpegs

Similar Messages

Maybe you are looking for