QT video resolution issues from Apple podcast server

My video is low res. 7.6.6 on OSX 10.5.8 has disabled the media settings. I have tried to change the settings for "instant on" but it keeps defaulting to the on position in the medium range. I tried to re-install 7.6.4 but while the player shows that it has been properly installed when i go to the QT pro registration it is still showing that it is 7.6.6. QUESTION How do I re-configure QT pro for my firefox browser so that I get the proper resolution (I don't want to upgrade to the newest OS yet.

"Instant On" setting is for "streaming" media:
http://www.apple.com/quicktime/technologies/streaming/
It has nothing to do with the video resolution.

Similar Messages

  • Podcasts don't play on an apple podcast server running 10.6.7 in firefox 3 and 4

    embedded podcast video hosted on an apple wiki server running 10.6.7 does not play, preview image does not click and begin the buffering of the linked video.

    Camelot,
    Thank you for reassuring me as prior to the recent nightmare I lived thru as result of a serious hacker, I just had to ask as I do not recall having had those prompts prior to the 7X uninstall, reinstall while under the Apple store's protection.
    Under the circumstances of having had a malicious neighbor/'friend' having had access to my Mac and dropping a malicious 'thing' to my Mac and I was able to get the exact (15 pages of) the actual hack code used..  I am still a bit shaken as the details, though unimportant, I am not taking any chances.
    Camelot, I thank you, with sincerity, for taking the time to read and respond to my post.
    Best Regards,
    macuser222

  • How to get the screenshot of mapview from apple maps server?

    Hi,
    Can we get the map view screenshot image from apple server?
    Acually i am getting the map view screenshot using mapquestapi. Below url is sample url for get the map view screenshot.
    http://open.mapquestapi.com/staticmap/v4/getmap?key=Fmjtd%7Cluub256b2d%2Cax%3Do5 -9u829z&center=33.943359,-118.212891&zoom=13&size=380,184&type=map&imagetype=jpe g&pois=blue_1,33.943359,-118.212891
    We have to pass the center coordinates of mapview, zoom level, map type, image type and pin color. We will pass these parameters to url then server will return the image.
    Is it possible to get the mapview screenshot from apple map server. If possible please provide some sample urls. If not possible then tell me the reason.
    Thanks in advance.

    James Ward4 wrote:
    Press and hold the Power button, and press the Home button, release both simultaneously. You will hear a camera shutter sound. The image will be stored in the Photo app.
    https://discussions.apple.com/thread/4250596

  • Video Playback Issues With Apple TV3 Running OS8

    I have two Apple TV3s (Both Pre 2013)
    One updated today to the latest OS8, the other still running the previous OS7.1.2
    Now when trying to play virtually any of my own MP4 videos the OS8 firmware version Apple TV3 refuses to play the file.
    Apple TV simply displays "An error occurred loading this content" (retrying simply displays the same error again)
    If I then use the second Apple TV3 (running the older firmware OS7.1.2) and try to play exactly the same files from the same iTunes library the file will play back correctly.
    So far the OS8 Apple TV3 is unable to play over 95% of the video files it could previously play prior to the firmware update.
    The odd file will play but these files are of differing resolutions so don't appear to share anything in common. It is always the same files that will or wont play.
    All video files are Profile 4.0 or lower and contain the required audio tracks.
    I am running iTunes 11.4.0.18 (Windows 8.1)
    Prior to the update every video file played correctly (on both Apple TVs) and the second Apple TV3 (using the earlier OS7.1.2 firmware) still plays the exact same files correctly.
    Music files are unaffected and playback correctly on both Apple TV3s.
    The latest firmware update appears to have corrupted the video playback of the Apple TV3 in some way.
    I have even tried a complete USB restore of the OS8 Apple TV3 but this has made no difference.
    Has anyone else experienced MP4 playback issues since updating their Apple TV3 to OS8?
    Thank you in advance.

    After further tests it would appear that Apple TV 7.0 (OS8) firmware is unable to play any video file with NO CHAPTER markers.
    If I use MetaX to simply tag an unplayable MP4 file with a single chapter, that file will now play correctly using an Apple TV3 running Apple TV 7.0 (OS8). If the single chapter is then deleted the same file reverts to being unplayable.
    In previous versions of Apple TV firmware any video file with NO CHAPTER markers could be played correctly and the Apple TV would automatically generate chapter markers at equally distributed time gaps.
    For some reason Apple TV 7.0 (OS8) firmware appears to have removed this auto chapter marker feature so if a file has no chapter markers the Apple TV will now consider the file as invalid.
    With MetaX it is possible to manually generate additional chapter markers so you can still skip through the file rather than only scan.
    iFlick for Mac should I suspect be able to do the same thing.

  • HT1498 How do I lower my video resolution using my apple tv

    How do I lower my video resolution using iTunes on Apple TV?

    how you lower your resolution when you run your appletv?
    or how you lower your resolution when you airplay mirror from your computer or ios device
    if the former then in the settings of your appletv

  • Wipe my phone number from Apple imessage server

    I need to wipe my phone number from the Apple iMessage server to when I receive messages from iPhone users the message isn't parsed into 5 or more separate messages.  I turned off FaceTime and iMessages on my old iPhone 4

    If you deactivated iMessage already successfully, then your contacts who use iPhones will need to erase any existing conversation with you and start a new one - that should fix the problem with fragmented messages.

  • How do i delete a video or playlist from apple tv without removing those items from itunes

    I don't know how to control content on apple tv. The only way i know to remove a playlist or a certain video from apple tv is to remove the corrisponding playlist or video.
    how do i manage files on apple tv

    Welcome to the Apple Community.
    Depends which Apple TV you have.
    On the Apple TV 1 you can uncheck it in iTunes, on the Apple TV2 you can't remove it, you can however give the content a parental rating and manage what content is restricted for playback using parental controls.

  • Still Having Video Resolution Issues

    After latest software update only able to get 1024x768 with a couple of annoying lines of distortion on left side of screen. Xbox 360 and new Sony media player can be adjusted to use screen to full potential. Would sure be nice to be able to adjust video on Apple TV 2. Family really likes ATV2, besides this video issue.
    Make: Panasonic
    Model: TH-50PHD8 (plasma)
    Connected: HDMI to DVI input (w/ HDCP)

    Chenks wrote:
    you are using an unsupported method of connecting it to your TV.
    HDMI>DVI conversion is not supported by apple.
    But the problem is not with DVI (HDMI to DVI is no conversion, the video signal is the same) but with the implementation of the HDMI specification Apple is doing with the ATV2. Other devices with HDMI to DVI cable or adapters are working, so it must be possible with the Apple TV 2. There is even no need to support DVI only TVs, it will just work when the HDMI specification is fully implemented. And the more it should work if those affected TVs support HDCP over DVI. Even Mac OS X recognises my TV (it shows Philips FTV in the System Preferences in Displays) and is offering the possible resolutions for my TV (480p, 720p, 1080i, and some more). I sent feedback to Apple via http://www.apple.com/feedback/ 2 times already, explaining about my TV and the possible resolutions and refresh rates.
    I still believe it is possible to solve all those resolution problems with the ATV 2 via firmware update, and this will also include those with DVI only TVs, even without the need to specifically support it. There are so many articles in different threads here about various problems with the connection of the ATV 2 to different TVs, even when there is only HDMI involved.
    Edwin.
    Message was edited by: Edwin Cikan

  • How can i monitor network traffic to debug video playback issues from a NAS?

    I am having problems playing videos on my new Mini that i am using as an HTPC. 
    I have a brand new Mac Mini running Lion with a 2.7 i7 processor and 8GB of RAM with a wired connection to a switch. .
    My switch is a NETGEAR ProSafe GS108T-200NAS set to default settings. I haven't had a chance to start messing with VLAN settings or anything else. There is a bit of a learning curve on my part on this end.
    My NAS is a ReadyNAS Pro (RNDP6000) with 3 x 1 TB hitachi ultrastar (HUA722010CLA330) drives and a 1.5 TB seagate (ST31500341AS) drive setup in RAID config using X-RAID2.
    The problem I am having is video playback when accessing large video files off of the NAS.  These are typically 1080 HD mkv files. 
    I have tested movies as small as 7.5GB with only slight stutters on occasion.  I tried a 10.5GB movie and the stalling was much more pronounced. Movies larger than 11GB are completely unwatchable stalling every minute or so. 
    I have also tried large movies on the local drive and that is not a problem at all - they play back just fine.  Beautiful playback in hidef.  Mind you, some of these are the same files that were stalling over the network.
    I have also noticed that some other network devices get kicked off the network when a movie is playing.
    I think it has something to do with the transfer speed of files over the network and the switch - i am no expert at this mind you.
    I am wondering if there is some sort of utility that i can use to monitor network activity on the mini so that i can fix my problem.  Or has anyone made chages in their switch settings to optimize data trasfer speeds.
    Any advice or recommendations on. 
    Thank you all!

    OK, I did a couple of things and ran things a couple of times. 
    First what I did settings wise:
    I enabled jumbo frames on the Mac Mini, ReadyNAS Pro, and the Netgear GS108T switch.  All with MTU set to 9000.
    I went ahead and enabled jumbo frames on the rest of the computers on the network just in case.
    After these changes I ran into the same problems with videos timing out - very annoying and frustrating as you can imagine.
    Then I started playing with device configurations.  My original configuration was NAS > Netgear switch > Mac Mini. I went ahead and switched the switch to an Airport Extreme I have as my WAP and the setup looked like this - NAS > Airport Extreme > Mac Mini. 
    Well, long story short, no go.  It appears to me that the NAS is the one having issues providing the necessary data at the proper speed.  I also tried playing sopme movies off of the NAS onto a desktop i have and had the same issues - choppy frames and crashing movies.  I even tried connecting wirelessly to see if that would work. 
    BTW, I have the Mac accessing the file system using CIFS. 
    I don't know what else I could do.
    I am going to have to go to the Netgear forums to see if i can figure this out.  Hopefully, I can get things going to be able to help some people out.
    If anyone has any ideas, they would be greatly appreciated.
    My only other alternative is spending $2000 for the thunderbolt capable NAS that Apple sells - it's only money!
    Cesar

  • No S-Video and composite video cable adapters from Apple?

    Hello.
    Is it me or does Apple's http://store.apple.com/us/browse/home/shop_mac/mac_accessories/cables/cable_choo ser not carry any video cable adapters that go to S-Video and composite inputs (an old Panasonic projector TV from Y2K) from MacBook Pros (2008 and 2012 models)? This is just for watching fullscreen videos.
    Thank you in advance.

    Courcoul wrote:
    Might want to canvass Mom & Pop computer stores in the area, that usually don't have such a furious inventory turnover rate as the big chains, and maybe you'll find what you need. Or look in eBay, Amazon, etc. Note that you don't NEED an Apple-labeled adapter, just one that will plug in whatever ports you have left and gives the required output.
    OK and thanks. I tried to find on big retailer stores online like Best Buy, Fry's Electronics, Office Max, Radio Shack, etc. but had no luck. Or maybe I am not searching correctly (DVI S-Video and DVI composite keywords as two examples)? I did find Apple's on Amazon.com based on the model number from someone on comp.sys.mac.system newsgroup: http://www.amazon.com/APPLE-M9267G-DVI-Video-Adapter/dp/B0000ACOBL/ ...

  • Video transfer issue from iPhone

    Hello!
    I own iPhone 4S and iPad (3rd Generation) and regularily make video with both devices and then transfer the video to my PC via the USB cable and then play the videos in Quick Time on the PC.
    Prior to updating to iOS 6 on both my iDevices on September 19, I had no problems at all. The videos transferred properly and I was able to view them on my PC in Quick Time. Today (September 25), I made a video on my iPhone 4S, transferred it to my PC the way I always have (via USB), and when I opened it in Quick Time, I just got a black screen with no audio. I then tried the same thing with my iPad (3rd Generation) and had the same results.
    The videos played perfectly on the iOS devices on which they were shot.
    Anybody else having these issues? What can I do to fix this?

    in case you ended up on this thread via web search (as I did today),
    I'll post how I solved it when it happened to me.
    the issue was caused by importing 3 months of camera roll using Image Capture (I do not use iPhoto anymore).
    after importing all the items, I selected them all in the Image Capture window and clicked on "delete".
    a few ghost files (video only) were left behind, all of them 0 Bytes.
    tried disconnecting/restarting the device but the issue persisted.
    no way to delete the video references from the mac.
    had to go in camera roll and manually delete them all.
    using "select' on the top right you can tap them and delete after they are all checked.
    hope this helps someone
    u.

  • Syncing/Video Format issue from iTunes to iPod touch

    I recently upgraded to a 4th gen touch from 4th gen iPod. All my previous videos were able to be synced properly. Ones I just purchased from iTunes store, however, I cannot load onto my iPod touch. I'm not able to sync it nor drag it into my device to upload.
    This is the message I receive when syncing: +"Some of the videos in your iTunes library, including "xxxxxx" were not copied to the iPod "xx" because they cannot be played on this iPod."+ When I clicked further the message reads +"...the video format is not supported by this iPod."+
    All of these are regular ole TV shows in MPEG-4 format. Yes, I can watch them on my computer. Yes, my software is up to date. Yes, I have iTunes 10 (and reinstalled it). Yes, my properties are to automatically sync my TV shows (which is why I'm constantly getting above error message). Yes, I restarted and reformatted my iPod touch.

    Have you tried using the Create iPod and iPhone Version in the Advanced tab of iTunes? That opion is made to convert most formates to the iPod and iPhone compatible formats.

  • Strange Video Resolution Issue

    Ok, here's the problem: I have a Mac Mini hooked up to my 42" plasma TV via a DVI/HDMI converter. Everything works fine, except that, when I'm viewing video content *during download* (movies, TV) from the iTunes store, if I try to display in *full screen mode* I get a big black screen with a little, tiny video window in the middle (other, non-full screen modes work fine, but I want full screen so that the background is blacked out, etc.) Once the download is complete, I can view everything just fine in full screen mode, or in Front Row. Does anyone have any idea why this is happening and if there's anything to do about it? I'm perplexed, and my wife is not amused.

    What Sony deck?
    You might not have a PLAY THRU option selected on the deck. I know the DSR will do this if you mash remote control buttons.
    The reason it works when capture is that the deck is sending OUT to composite/component directly. When you watch from FCP it is converting the digital signal from FW to an analog-ish signal back out the composite/component plugs. Apples and Oranges. BUT - should be a simple menu option.
    Good luck,
    CaptM

  • Rtp video streaming issue from linux to windows

    i am currently running a windows machine and linux machine on the same network connected by a linksy wrt45g router. i am trying to use avtransmit2.java and avreceive2.java to stream a video from one computer to the other and i can't get it to go from either win to linux or linux to win.
    i am able to send information from one computer to the other through an objectoutputstream, but i have been unsuccessful in getting video to go through rtp from one computer to the other.
    anyone have any ideas? it is starting to get really frustrating. i have been able to do something similar using vlc, but the avreceive and avtransmit won't work. i am using a new configuration, and have been successfull with the same code previous times
    thanks
    bd

    You can use MediaPlayerLauncher or MediaElement control
    https://msdn.microsoft.com/en-us/library/windows/apps/hh394004%28v=vs.105%29.aspx
    https://msdn.microsoft.com/en-us/library/windows/apps/ff769551(v=vs.105).aspx
    Gaurav Khanna | Microsoft .NET MVP | Microsoft Community Contributor

  • Create a DVD | Video resolution issue - HD or FullHD

    Hi,
    I created a new project selecting PAL and AVCHD 1920x1080 16:9 25fps video. The original AVCHD video in FullHD is 9GB.
    I now have to create a DVD and end the project selecting to burn it on a 4,7 GB DVD but wish to preserve the FullHD if possible.
    When selecting the option to burn the DVD I get in the drop down menu 4 selections being 2 for NTSC and 2 for PAL: PAL and PAL Widescreen.
    Obviously as the project is 16:9 I should select Widescreen but I do not know if I will end up having the video in FullHD.
    Here are my few questions:
    1. how to be able to burn a FullHD video project into a 4,7 GB DVD if i do not see any FullHD selection in the drop down menue for DVD category? Is this because DVD category does not manage FullHD?
    Reading through some manual I believe that it is AVCHD the selection I should use, rather than DVD. Is this correct?
    Also, what resolution would Pal Widescreen record?
    Lastly, how to find out which resolution i now have the project being burned on this DVD?
    2. If I know that my project in FullHD is bigger than  4,7 GB DVD what should I do, when I create a new Premiere EL project, in order to get the best resolution? Should I select still AVCHD but HD resolution even if I will not know if it will be sufficient?
    Can someone please share with me what is the correct discernment to use for preparing a new project and/or handling the video settings for getting the properl DVD result?
    Thank you

    >find out which resolution the project being burned on this DVD
    Link to DVD Demystified FAQ http://forums.adobe.com/thread/544206 may help
    A DVD made to play in a DVD player, not a BluRay "hybrid" as Hunt described, which requires a BluRay player, may NOT be HiDef... only Standard Definition
    As far as I know, NTSC is 720x480 (with a PAR flag to determine regular 4:3 or widescreen 16:9 playback)
    I do not know the exact size of a PAL screen but since you mention PAL, you should be able to find out the screen size for your part of the world

Maybe you are looking for