QT won't work in safari, HELP

I can't get any quicktime content at all i just get a black rectangle saying no picture in the middle . Nothing streamed or otherwise. I tried quicktime troubleshooting on the apple site and i still got black rectangles no qt logos. So I followed what it said and reinstalled QT., Still nothing. I then tried to follow the link to the qt support area and it crashes Safari every time.
Any Ideas? I am running Tiger and have a 1ghz MDD power mac with 1.2 gig of ram I don't get what the issue is. I even uninstalled Realplayer, firefox, incase they were conflicting but no change.
HELP Rik

You're seeing the symptoms of a browser plug-in conflict. Third party components you may have downloaded and installed. Do this:
Open the HD/Library/Internet Plug-Ins folder and drag any with VLC in their name to your Desktop. Remember these steps so you can put it back, if needed.
Quit and relaunch Safari and try the file (page) again.

Similar Messages

Suddenly all movies won't work in Safari

Suddenly all quicktime or flash movies won't work in Safari. Just has the Quicktime logo with a question mark in the middle. I have the latest browser for Panther. What's the deal? It's a bit annoying seeing as I make films myself and can't test my uploads to You tube and so on. Help! Please.

Same problem here. My extended problem is every time I re-install Flash Player, the movies work fine - UNTIL I need to exit Safari or shut down. When I bring it up again, the Question Mark is back. Also when I repair permissions the page just fills up with Flash Player Repairs. Looking for a pattern, I am now repairing permissions each time I re-install and my G4 iBook AND Intel duo does the same extensive repairs with each install. Help?

Since installing IOS6 autofill won't work in Safari.

Since installing IOS6 on my Ipad3, autofill won't work in Safari. It used to fill my name and address. Please help!
I've enabled Autofill, switched off Private Browsing, turned off Block Pop Ups...it was fine till I began with IOS6.

Hi all,
it seems that the root cause for this issue is identified:
Unfortunately it's not a bug, but a bufix which is responsible for this changed behaviour of autocomplete function in Safari browser.
The bugfix was introduced in iOS 6 and corrects that password input elements on HTML forms with the autocomplete attribute set to "off" were being autocompleted although they should not.
You can check if this is also the root cause in your case by searching in the source code of the webpage with the HTML form if the autocomplete tag is present and set to "off":
<input type="Password" name="password" ... autocomplete="off" ... >
References:
[1] http://support.apple.com/kb/HT5503 (search for string "CVE-2012-0680")
[2] http://www.cvedetails.com/cve/CVE-2012-0680/

I just loaded Yosemite on my Mac and now adobe flash won't work in Safari 8.0.4 . Does anyone have a solution ?

I just loaded Yosemite on my Mac and now adobe flash won't work in Safari 8.0.4 . Does anyone have a solution ?

If you can't install or update Flash, follow these instructions.
If you have installed the latest version of Flash, please take each of the following steps that you haven't already tried. After each step, relaunch Safari and test.
For a "blocked plug-in" error, see Step 4.
For a "missing plug-in" error, start with Step 8.
Back up all data before making any changes.
Step 1
You might have to log out or restart the computer before a Flash update takes effect.
Step 2
From the Safari menu bar, select
          Safari ▹ Preferences... ▹ Privacy ▹ Remove All Website Data...
and confirm. Close the window. Then select
           ▹ System Preferences… ▹ Flash Player ▹ Advanced ▹ Delete All...
In the sheet that opens, check the box marked
          Delete All Site Data and Settings
then click Delete Data. Close the preference pane.
Step 3
If you're only having trouble with YouTube videos, log in to YouTube and load this page. You may see a link with the text "Leave the HTML5 Trial." If so, click that link.
Step 4
a. If you get a warning of a "blocked" or "outdated" plug-in, then select the Security tab in the Safari preferences window. In the list of plugins on the left, there should be one—and only one—entry for "Adobe Flash Player," showing the same version number that you installed. Select that entry. On the right there will be a list of websites for which you have specifically allowed Flash, if any. It's normal for the list to be empty. Below that is a menu labeled
          When visiting other websites
From that menu, select either Allow or Ask.
b. If you still get the alerts, then go back to the Flash Player preference pane and select the Advanced tab. Click Check Now. Quit and relaunch the browser.
c. If the alerts still persist, triple-click anywhere in the line below on this page to select it:
/System/Library/CoreServices/CoreTypes.bundle/Contents/Resources
Right-click or control-click the highlighted text and select
          Services ▹ Open
from the contextual menu.* A folder should open. Inside it, there should be a file named "XProtect.meta.plist". If that file is missing and you know why it's missing, restore it from a backup or copy it from another Mac running the same version of OS X. Otherwise, reinstall OS X.
*If you don't see the contextual menu item, copy the selected text to the Clipboard by pressing the key combination command-C. In the Finder, select
          Go ▹ Go to Folder...
from the menu bar and paste into the box that opens by pressing command-V. You won't see what you pasted because a line break is included. Press return.
Step 5
In the Safari preferences window, select the Advanced tab and uncheck the box marked
          Stop plug-ins to save power
Step 6
Open this folder as in Step 4:
/Library/Internet Plug-Ins
Delete the following item, or anything with a similar name, if present:
          Flash Player (failing).plugin
You may be prompted for your login password.
Step 7
Re-download and reinstall Flash. Download it from the domain "get.adobe.com". Don't click a link from any other website, including this one, because you can't trust links. They may be an attempt to trick you into installing malware masquerading as Flash. Type the address into the browser window. Never download a Flash update from anywhere else.
Step 8
If you get a "missing plug-in" error, select
          Safari ▹ Preferences... ▹ Security
from the Safari menu bar and check the box marked
          Allow (or Enable) plug-ins
Then click the button marked
          Manage Website Settings...
if present and make sure that the website is not blocked for Flash.
Step 9
Select
          Safari ▹ Preferences... ▹ Extensions
from the Safari menu bar. If any extensions are installed, disable them.

Firefox won't work but Safari will???

Firefox won't work but Safari will?
Firefox was already loaded on my macbook pro but won't work??

Firefox doesn't come preloaded on new Mac's.
So you must have gotten this machine used and the person set up Firefox with a proxy amongst other "tweaks" that your not aware of, possibly even remote access to your machine.
If this is a used machine you bought, ideally it would be best to backup any files you have to a external drive, c boot off the installer disk the other person should have given you and use Disk Utility > Erase > Zero and format the drive HFS+ Journaled. Quit and install OS X and start with a fresh machine.
If you don't have the disk, a $29 Snow Leopard install disk is avaialble from Apple (no iLife programs, sold seperatly) which you can do the same as above.
If you don't want to do this, then delete Firefox and it's Library > Application Support > Firefox folder and reinstall it fresh from Mozilla.
Just reinstalling Firefox alone doesn't work, the support files need to be trashed as well.

If I already purchased FaceTime for Mac and recently upgraded my HD. How can I retrieve that app again? I found it in my Time Machine back up, but the files won't work. Please help.

If I already purchased FaceTime for Mac and recently upgraded my HD. How can I retrieve that app again? I found it in my Time Machine back up, but the files won't work. Please help.

Nope. I do the same exact thing. If you have DVD's and blu-rays you can't download a free application called Handbrake. You can set it to Apple TV2 automatic format and they will come out as playable m4v's that can play I'm iTunes. All you have to do is turn on Home Sharing in both iTunes and your Apple RV and you'll be good to go!

Got a new PC with Windows 8. Now my CS6 for windows 7/XP won't work properly! HELP!

Got a new PC with Windows 8 and now my CS6 download for Windows 7/XP won't work perperly! HElP!

ANYBODY????

Adobe Flash Won't Work With Safari

Just today i found that something is wrong with either youtube, safari or flash player. Whenever I click a video on youtube it gives me this huge wall of text. I don't know if this has occured with anyone else before but please help! its really frustrating and I can't really find any answers online. I even tried restarting and reinstalling flash player and it still won't work. Thanks!
^^^ it looks like that :\

theminimalist wrote:
Just today i found that something is wrong with either youtube, safari or flash player.
I vote Flash Player.
First uninstall Flash Player according to the instructions here:
http://helpx.adobe.com/flash-player/kb/uninstall-flash-player-mac-os.html
Read and follow all the instructions with care.
If you must have Flash Player, install it from this site:
http://get.adobe.com/flashplayer/

IChat video won't work !! HELP!!!

my girlfriend and I both recently bought mac laptops and hope to have some video conferencing on the go, being that i'm moving away. I already have a mini DV camera, and it works fine with the video conferencing....but she has a logitech one and it won't work with ichat....is there something taht needs to be installed or will it just not work for some reason??
HELP PLEASE!

iSight vs Camcorder or other web-cam FAQ
iChatUSBCam link and other info in there.

I get the message "an error occurred while loading your favorite themes" and my persona rotator won't work. Please help?

I usually use the Persona Rotator using My Favorites as its themes to rotate. Lastely my rotater has not been working. I click on Tools, then Personas, then My Favorites and am asked to sign in to use my favorites with the Rotator. I follow all these steps and all seems to go fine, except my Persona Rotator does not rotate. Again I click on Tools, Personas, My Favorites and there is a message saying "an error occurred while loading your favorite themes" and therefore won't work. I don't know what the problem is or even exactly when it started, but it doesn't work and I'm most disappointed. Please fix or help me to fix it so I can enjoy my rotating themes again.

In order to switch to another persona that you had previously installed, do the following:
#Go to ''Tools'' and click ''Add-ons'' (or click the Firefox button at the top left and click ''Add-ons'').
#Switch to the ''Appearance'' tab. You should find your previously used personas in the list.
#Find the one you want to use and click the ''Enable'' button.
To uninstall the other ones you can click the ''Remove'' button on them and they'll be uninstalled instantly.

Playing Quicktime won't work in Safari, displays code.

Using my iPhone 3GS, I've attempted to load Quicktime Movies from websites and it just displays code. Whereas, on my old iPod Touch it would display just fine. The podcasts from the ESPN Podcenter WebApp is a perfect example of this. Can anybody help?

i found out how to make it work,
Settings > Safari > and make sure Plug-Ins is set to on and then try your website.
it worked for me.

Bookmarks won't work in Safari

I'm using Mac OS 10.7.3 on 2.8 Ghz Intel Core 2 Duo. I can't get bookmarks to work in Safari. I try to bookmark things and nothing is saved in the bookmarks window. Thanks for your help.

Quit Safari. Disable bookmark synchronization, if applicable.
Hold down the option key and select Go ▹ Go to Folder… from the Finder menu bar. Copy the following line into the text box that opens, then press return:
~/LibrarySafari/Bookmarks.plist
Move the selected file to the Desktop, leaving the Finder window open. Relaunch Safari. Select File ▹ Import Bookmarks from the Safari menu bar. Import from the bookmarks file you moved to the Desktop. Test. If Safari now performs normally, you can delete the old bookmarks file. Otherwise, quit Safari again and put back the file you moved, replacing the newer one with the same name. Close the Finder window and post again.

Multi-angle won't work..please help!

This problem is using version 2.0.0 (sorry, I hope someone out there still remembers) and has been replicated on two seperate computers. The first is an ibook g4 1.33ghz with 512 ram...the second a dual g5 2.0 ghz with a 2 gigs of ram. The problem occurs during the build. On the g4 the problem crashes the program, on the g5 there is a internal muxer error and the build process cannot complete. I first noticed the problem with a big project that was mostly audio with slide shows...so I stripped it down to the bare essentials and the problem is still there. This is what I do: new project> import 3 aiff files (16bit/48khz) and 2 jpg images > copy the first jpg into a slide show 3 times and add one aiff to each slot > convert to track > add the second jpg into video track 2 under each of the first jpg's (the size auto-matches) > make basic menu to start playback of slideshow > simulation works fine, angle switches fine > crashes or stops on build (depending on computer using)
things i've tried that haven't worked > different jpgs, ones that have the same dimensions > fix markers in the track menu preferences > tried using my internal drive instead of external for both originating files and build files > if i delete the second video track of jpg's the build goes fine so this is definatly a multi-angle issue...I've heard of bit-rate issues with multiangle, but these are jpg's, there is no video...
Someone PLEASE help me
Thanks

Ok thanks for the help... I don't know how helpful it will be though... let me explain what I'm trying to do, which will explain why some of your suggestions wouldn't work. I record live concerts and I'm just trying to fit a full concert onto a dvd. I would like chapter markers at the beggining of every track, though I would like absolutly no pauses between tracks (tracks have been cut to cd sector boundries of 1/75 second, which seems to work fine on DVD even after converting from 44.1 to 48. ). I would like 2 menus ... a welcome screen and a setlist screen linked to each song. I would like the show to play in it's entirty with a bands logo on the screen (which is the first JPG) and have the second angle just black (to save tv sets from frying). If the show is 20 songs then I create a 20 slot slide show with the bands logo and the 20 songs. I then covert this to a track...as this is the only way to add an alternative angle. If I don't add 2nd angle of black, the burn goes fine, if I do then it crashes.
Now if I were to encode the jpg's to mpeg2 before adding to the project this would mean I need over 3 hours of each, cut in 20 different spots that correspond exactly to the audio.
Now the quality of the audio is very important to me so I'm not willin to use any lossy compression scheme. The whole disc is really just for listening too and is of an audiophile nature. Now I understand AC3 does a pretty good job, which is fine for movies, but for my purposes I need it to be exact. So this means I would have to fit the 3 gigs of audio along with 6 HOURS of mpeg2 video encoded from the 2 simple jpg images that take up less than a mb themselves. This is simply too much data, I can't fit it onto the DVD.
What's nice is what DVDSP is suppose to do is convert the jpg's for you and they only then take up a very small amount of room, and stay on for the full 3 hours none-the-less.
So you see any workaround that envloves making the slideshow as video in FCP beforehand won't work because I'm going for 2 angles at over 3 hours with uncompressed audio.
Now you say that DVDSP converts the jpg's to mpeg2 anyway so I figure it must just keep looping the same video over and over to save room..because there is no significant increase in size from adding the jpg. It's definatly not making a 3 hour mpeg2 file. So if I encode the jpg beforehand, say for 30 seconds...how do add it to the project in such a way that it just loops the video over and over to save room (the same way it does internally with the jpg) Keep in mind I need to make the video fit the audio tracks exactly with chapter markers inbetween. When adding jpg's to a slideshow and then converting to a track this is done automatically and when I add the second jpg to V2, the length auto-matches to the chapter markers. So it's very easy when working with still pictures ... but how do I do it so simply with a 30 second mpeg2 clip? And make sure that it's always referencing the same clip without having to add it umpteen times and thus uincrease the disc size beyond capacity.
Now as for the multiangle encoding fix ... lets say I proceed with the two jpg images as they are and let DVDSP do the encoding... I want to make sure both streams are compatible which is probably why the build hasn't been working.... I know the markers and length are good because the slideshow added them and the second jpg autosizes to them...and i have fix markers checked in track preferences. But how do I make sure that they have the same GOP structure and that they will have the same bitrate? Now the pics are very different so a different bitrate is expected. One is just black and the other is a band logo. But I tested it with identical pics in both video tracks to see if it was a compatability issue and the build still failed.
Ok so I don't neccesarily need to use jpg. The band logo is jpg but I can convert it...the black is just a slug from FCP exported as a still. What's the best format to use for what I'm trying to do? What has the best success rate for encoding? Also you mention having access to a decent encoder. For $1000 i was hoping that I was getting one in the package ... bewtween FCP, quicktime, compressor, or DVDSP ..it's rediculous that a decent encoder wouldn't be included... what would you consider a decent encoder ... and of the ones I have which one should I be using (for future projects involving video)?
I know this is a tough one, I appreciate any help that can be given.

Alarm Clock won't work. Please Help!

My alarm clock won't work. When I set it to the time and it goes off , the sound does not come on. Can someone please help me.

I have the same problem. The iPod is only a week old and the alarm worked on 30th of December, but today (1st of January) it has refused to work.
I've tried restarting the iPod, force quitting the clock, changing time zone and I've even tried setting an hour ahead & behind, in case the problem was connected with the daylight savings setting on my Mac.
The alarm won't work and I'm stumped!
Edit: just found this on another thread about this very subject...
http://mashable.com/2011/01/01/iphone-clock-bu/
Message was edited by: Graham.R

Images in slideshow became BROKEN CHAINS. Suddenly won't work. Please Help!

I need to give this iDVD to my friend who's leaving the country TODAY. Your help is much appreciated:
I made the DVD and it was all running smoothly and seemed to burn OK, but when it was done burning most of the pictures (but not all) in the slideshows turned into a broken chain with black and yellow stripes on the top and bottom. Why did this happen?? I don't know why they became this, there was no problem before. Some of the pictures are OK, seems random.
If you could tell me how to get my pictures back to replace these broken chains so I can reburn the DVD where all the pictures work. Please Help!
iBook G4 Mac OS X (10.4.10) iDVD 5.0.1

Yeah I realized I had moved images to a different folder. I moved them back and am burning a new DVD right now. Thanks for the quick response & have a great day! :]

QT won't work in safari, HELP

Similar Messages

Maybe you are looking for