QTEK 9100 better known as wizard Windows Mobile 5 Phone

I made a big mistake buying a moblie Phone QTEK 9100 better known as Wizard in other countries than Switzerland.
This This is a Windows Mobile 5.0 Device with all you can think except that it does not work at all with my Mac.It is not compatile with isync at all. Wireless works sometimes and sometimes not and it has other problems too.
But is there a possibility to make it run with isync so I could sync my calendar and my adressbook ? This would really help me.
Does Apple plan to support isync with mobile 5. 0 somehow ?
Powerbook G4,Mac mini universal,ibook Mac OS X (10.4.7)

http://www.markspace.com/missingsync_windowsmobile.php

Similar Messages

Windows Mobile L2TP Configuration

I am trying to get VPN working through a Windows Mobile Cell Phone through at L2TP connection but have failed. I can see the attempts coming into our ASA firewall however the username is always blank and I have not found much information on how to configure this. Does anyone have any ideas or information on how to configure this?
Thanks

To allow end users to connect using Windows Mobile devices, configure the Mobile Policy parameters. These parameters apply only to Windows Mobile devices. Include them only if your end users use Windows Mobile. Windows Mobile Policy enforcement is supported only on Windows Mobile 5, Windows Mobile 5+AKU2, and Windows Mobile 6. It is not supported on Windows Mobile 6.1. Attempts to connect to a secure gateway that is configured to require a security policy that cannot be enforced will fail.

Windows Mobile devices can't send to my iPhone

I searched many pages of this forum with no answer and no similar issues:
I have my iPhone syncing up with Exchange 2003 via the IMAP protocol. It sends/receives messages fine. It receives messages from BlackBerry devices fine.
It will not download or receive messages sent from Windows Mobile devices (version 6 Standard or Professional). I've had 3 different people send me messages from their phones and I cannot get them - iPhone Mail says "downloading X of X messages..." so I know it sees there's a new message, but it will not show up, or even recognize the new message. If these same people send me a message in Outlook 2003 I get it on the iPhone, but not when they send from their Windows Mobile device.
If I don't hear anything from anyone in here (as it looks like there are many unanswered topics) I will contact Apple.

The problem occurs when on both the EDGE or Wi-Fi networks.
The messages are plain text messages (with or without attachments) sent from an HTC Tilt, Samsung Blackjack II, and another Windows Mobile 6 phone.
The iPhone will initially tell me that it sees the new message (Loading 1 of 1 messages), but will not display or download the message. I also made sure it's not being auto-sent into the Deleted Items or Junk or Spam folders (remember this is under Exchange). This same person, when they e-mail me from another client like Outlook - will have no problem sending a message and me getting it.
There is no notice on the sender's end that their message was not downloaded on my end.
I can see their message fine in the Outlook or Entourage client.

Satellite A660-11M - Can't connect to Windows Mobile 6.1 smartphone

I cant connect my phone (sony ericsson experia x1) to my laptop Windows 7. When I'm trying to setup connection via toshiba bluetooth stack, it shows me an error "connection has been denied by PAN server [name of the my phone]". I was trying to change some options in bluetooth stack, but it was unseccesfull.
I'm sure that there is no problem with my phone, becuase I can connect it anytime to Windows XP on the another laptop.

Check out the How-to document
"How to connect the PC to the internet via Bluetooth by using a Windows Mobile 6 phone".
http://aps2.toshiba-tro.de/kb0/HTD9602MW0000R01.htm
It describes your problem and proposes the following:
Resolution:
* Check if your Windows mobile phone is still connected to the internet.
* Establish the Internet Sharing connection again.

Is symbian or windows mobile better to access mac shares via vpn?

I am considering a smart phone purchase in the next few months, and I would like to be able to browse my server via vpn from the phone the same way I can with my Palm LifeDrive. I think Symbian or Windows Mobile are my best OS choices for a phone, and I was wondering if anyone has actual experience with this. Do they use PPTP or L2TP? At this point, the iPhone cannot edit documents, so it is not a consideration, but I am also curious if it allows for this type of remote browsing through a VPN.
Thank you for any help that you can offer.
Michael

I have done some more testing and oddly enough I can map a drive if I use the IPaddress, but not the computer name, when checking the check box "connect using different credentials"and providing they users domain credentials.
This seems to point to a DNS issue, one would think, but I can hit the file share server by name \\fileserver.dev.lan
I can see all the shares, so dns seems to be fine right?
So I don't understand why I can map a drive using do the IPaddress and not the machine name, but yet I can see and ping the server by name?
When I try to create a mapped drive by machine name I receive the following message:
Windows cannot access \\fileserver.dev.lan\all
You do not have permissions to access \\fileserver.dev.lan. contact your network administrator to request access.
But if I use the \\x.x.x.x\all using the very same user and password I get connected with no problem.
This only seems to happen on windows 8.1, which leads me to think that has something to do with OS.
I am thinking about upgrading to windows 8.1 pro, but I don't want to go though the hassle and expanse is the OS is not the problem.

Known Issue: Emulators for Windows Mobile 10.0.10069 : The installer failed. User cancelled installation. Error code: -2147023294

Some users are receiving the following errors after Visual Studio setup completes
Emulators for Windows Mobile 10.0.10069 : The installer failed. User cancelled installation. Error code: -2147023294
Windows 10 SDK 10.0.10069 : The installer failed. User cancelled
installation. Error code: -2147023294

We've fixed this issue, and have released an update as of 7PM PDT 30 April 2015.
New installs of Visual Studio 2015 RC should expect to no longer encounter this problem, unless
you lose your internet connection during installation. (That is, this error now indicates that the Windows SDK or Windows Emulator setup invoked by Visual Studio setup has lost internet connectivity and cannot download necessary files.)
To fix the issue, re-run setup and select the features "Universal Windows App Development Tools" and/or "Emulators for Windows Mobile" again.
If you have already installed Visual Studio and encountered this problem, you can now modify your Visual Studio installation to successfully install.
Go to Program & Features, select Visual Studio 2015 RC, and select Change. Click
Modify, then select the features "Universal Windows App Development Tools" and/or "Emulators for Windows Mobile", and click
Update.
Note that "Universal Windows App Development Tools" will be already selected. This is expected. Keep it selected, and click
Update.
An alternate solution is to install the Windows 10 SDK and Windows Emulators separately. Go to
https://dev.windows.com/downloads/windows-10-developer-tools. Scroll to the bottom of the page and install
the Windows 10 SDK and Windows 10 emulators outside of Visual Studio setup.
Thanks!
-Paul

Known Issue: Cannot Deploy to a Windows Mobile Device (Windows 10 Insider Preview SDK and tools, April 2015 release)

To deploy to a Windows 10 Mobile device with this release, your device must be running Windows Mobile OS build 10074 or later. When deploying your Universal Windows app to a device with an earlier build, or a Windows Phone 8.1 device, you will get the following
error:
Error : DEP0001 : Unexpected Error: The Appx package's manifest is invalid. (Exception from HRESULT: 0x80080204)

Use the Windows 10 Mobile emulator or update your device to Windows Mobile OS build 10074 or later.

Known Issue: Setup warnings for Windows 10 SDK, Emulators for Windows Mobile, and Tools for Windows 10 Universal Apps (Windows 10 Insider Preview SDK and tools, April 2015 release)

When you install Visual Studio 2015 when not connected to the internet, for example from an ISO, you may receive warnings after setup completes for Tools for Windows 10 Universal Apps, Windows 10 SDK, and Emulators for Windows Mobile. These warnings include:
This product did not download successfully: The server did not return the file size.
This product did not download successfully: Signature verification failed on downloaded file.
This product did not download successfully: HTTP Status 502: The server….

To fix this issue, your computer must be connected to the internet to download these components.
Make sure your computer is connected to the internet.
Open Control Panel, and select Programs and Features.
Select Microsoft Visual Studio 2015 RC, click Change, and then click
Modify.
Select the feature “Universal Windows App Development Tools”, and click
Update.

USB-6009 Daqmx Base 3.3 Cannot creat 2 or more channels on Windows mobile 6

Hello,
I have USB-6009, PDA iPAQ 214, WM6, Daqmx base 3.3, Labview 2009. In order to create new mobile project I use wizard and standart dynamic example: Cont Acq&Graph Voltage-Int Clk.vi. All works ok, but if I add more chanels in VI "Create Channels" or place new VI block and enter "Dev1/ai1", exe on my PDA cannot work correctly. Exception after RUN. I have no idea how build correct application with 3 channels without this exeption... On PC all works. Whay right way to create channels? I attach VI which don't work, for examle. I read daqmxbase cannot support WM6, but 1 channel work ideal!
Attachments:
diagramm.jpg ‏113 KB

Vital000,
I forgot to mention that, yes, Windows Mobile 6 is not supported along side of DAQmx Base. That means you might be able to get some of the same functionality(limited) that you would with Windows Mobile 5, but most likely not 100% functionality. This could explain why 1 channel works and multiple channels do not. I will try and help you out, but as this is not supported my ability to help is limited.
Ben Sisney
FlexRIO V&V Engineer
National Instruments

SSO problem on Windows Mobile with WAS Java 7.0 and R/3 4.7

We have a curious single sign-on problem with custom WM-app.
The application is developed using WD Java and currently runs on WAS 7.0 SPS10. WAS makes calls to several RFC:s on 4.7 Enterprise and authentication is done using SSO.
The enduser device is a handheld running Windows Mobile and the browser is a vendor (HHP) provided Mobile IE based HandHeldWeb. Because of the poor usability of the default login on handhelds we created a custom J2EE Web Application JSP which does the login to the WM-app.
On a PC browser everything functions normally, but occasionally with the mobile device no data from R/3 is displayed. As if SSO didn't work. Sometimes, if transaction 1 doesn't work and the user comes out of it, then runs transaction 2 which makes an RFC call and then returns to transaction 1 it works. Sometimes..
This problem does not occur on mobile device when the default login is used. And as stated previously, on a PC the custom login works fine.
-Erno

Hi,
Currently SAP is selling the Software in Business Suite .
If you are purchasing the SRM 7.0 .It will come as Business suite . It will contain
1. SRM 7.0
2.CRM
3.PLM
4.SCM
5. ECC 6.0 wiht Eph 4
When you are getting the ECC 6.0 in this package why to use SAP R/3- 4.6C
So better you upgrade both the SRM and R/3.
I would like to know if SRM 7.0 and R/3 4.6C is compatible in first place.Will it work?
It will work but in the long run you will get lot of Problem.Since SRM 7.0 is Based on Webdynpro technology
Regards
G.Ganesh Kumar

RFE: Some issues with the Pre/WebOS coming from the perspective of a former Windows Mobile user, Part I

I just switched over to a Palm Pre from a Windows Mobile device a week or two ago. Now, don’t get me wrong here—I really do like the Palm. For the most part, all of those things that were buggy, slow and inconsistent with Windows Mobile just simply work on the Palm, and that’s a very good thing. However, when a product is so good, it makes the problems stand out all that much more, and with a lot of the problems I’m finding, the decision making on the part of Palm that led to the problem is just baffling to me. I am hoping that I am just missing something on at least some of these issues, but so far, I have a laundry list of the things/features/omissions that I just really can't understand. Because I have 8 issues, I'm going to break these down into three separate posts, with a few days in between each. So, here goes PART I:
1) You can't select/manage multiple e-mails or text messages?  This is a pretty big problem, as I very consistently need to mark dozens and dozens of messages as read and then delete them, and swiping them off the screen one at a time just doesn't cut it. Not only is it slow and painfully cumbersome, but it leaves them all marked as unread back in Outlook. This really needs to be fixed, and I cannot imagine that even one single Palm user would disagree with me on this. Actually, I think my bigger concern is how the product got developed without this ability in the first place, especially when prior Palm offerings apparently had it.
2)  WebOS forces you to sort ALL contacts the same way?  I have many contacts set up in Outlook to be sorted by last name, and many others set up to be sorted by company name. I've done this because that is how I need them sorted--sometimes the individual is my focus, but I have their company listed, and sometimes the company is the focus, but I have an individual contact listed. Outlook, and every other contact management app I've seen, recognizes this, and allows me to sort each individual contact in the manner that best fits that contact. Unfortunately, WebOS apparently ignores the Outlook "File As" field, and makes me sort everybody the exact same way. As above, I cannot imagine anybody disagreeing with me that this is an important fix, and also as above, I can’t figure out why this wasn’t simply done this way from the get go.
3) No scroll bars?  Okay, so scrolling by flicking with your finger obviously works better than scrolling with a scroll bar along the side of the screen, but let’s not forget the fact that the scroll bar performs another EXTREMELY important function aside from actually scrolling: the scroll bar provides the user with instant feedback as to how long the list is and how far down the list the user has scrolled. These are two extremely, extremely useful pieces of information, and they are completely missing on the Pre. I tried to look through some applications on my Pre the other day (more on the problems with the app store below), and I had a list of probably 100 or 200 applications that fit my search criteria, and I scrolled, and scrolled, and scrolled, and never had any idea of any sort how far down the list I had gotten nor how far I had left to go—and that was extraordinarily frustrating. Oh, and if I wasn’t able to finish going through the list in one sitting, guess what, I have absolutely no possible way to run the search again and quickly get back to the point where I left off, because I have absolutely no idea how far along I had gotten. I have to say, this glaring omission makes using the Pre on anything but very short lists and websites, well, unusable. Scroll bars are everywhere—they’re there in every single program or application I have ever seen when the data presented goes off the available screen area, and there is a very, very good reason for their overwhelming prevalence—a reason that has nothing to do with the actual act of scrolling. I think this one is probably my biggest complaint with the Pre.
I will post the next few in a separate post, but these are my "top 3".  To be honest, most of these just really leave me scratching my head wondering “what were they thinking?” The Pre is a great product, but obvious little shortcomings really stand out on a good product (can anybody say “where’s the cut and paste, Apple?”, which, by the way, is a mistake that MS is about to bafflingly repeat with WM 7). I should note that it would be difficult for anybody to say that I suffer from "One True Way" syndrome when all of the things I suggest, if implemented, wouldn't detract from the experience of those users who don't want these features, but they would benefit those of us who do want them tremendously. My "way" doesn't require a compromise of any sort for anybody--it merely requires adding features, and the people who don't want/need those features can simply ignore them with no ill consequence of any sort.  Sorry for the long post, but I’m hopeful somebody at Palm is listening. And yes, I know that posting multiple problems in one post is not ideal, but these all have a common, intertwining theme, and I'm at least breaking them up somewhat.

I really like my Pre, but I understand what you mean about somewhat baffling omissions in features. I think the Palm has a winning platform already, they just need to focus on hunting down and destroying bugs for a few months. Honestly, most of the things the Pre is missing should be provided by third parties except they're hesitant to invest because the pre and pixi haven't sold like gangbusters compared to Android and the iPhone. But really, if the price keeps dropping on palm hardware and they keep launching on new platforms (due soon on att), I think we'll be looking at a different view in a few more months. I'd wager that Palm has sold a bit less than a million devices, add Att and you'll end up around 1.2-1.5. If they keep fixing issues and making current customers happy, then launch a nice phone the end of this year, they'll be in good shape. You don't need to sell 15 million units to have a viable platform, just enough of a mass to ensure people want to take a risk developing. Notice this story http://www.technewsworld.com/story/69684.html?wlc=1270413481 .

Error while trying to debug on windows mobile 6.1 with j2me SDK 3.0 ea

Hi,
I tried to debug a simple application today. It works fine with the emulator but debug fails to connect to the device.
I followed the steps described in the userguide of 3.0.
host operating system: windows xp sp3
device: htc touch pro
device operatiing system: windows mobile 6.1 professional
The device is listed in the device selector of the SDK as Touch_Pro
The device is connected and active sync is running (i can explore the phone using windows explorer)
sun-java-cldc-emu.cab has been installed on the device and is running
When i try to debug the application from the SDK or netbeans 6.5(added 3.0ea as a platform) i get the following error:
Starting emulator with port number 51307
Cannot create device connection: Failed to connect to device 9!
Result: 1
I tried setting the loglevel to DEBUG in log4j config of the SDK, but thats it.
Are there any other settings i can change to get more detailed output?
Where do you report bugs/feedback for j2me SDK 3.0 ea?
regards,
dominikg
Edited by: dominikg on Dec 11, 2008 8:36 AM
-- changed topic title to 'error' instead of 'howto'
-- added more specific questions

Hi dominikg,
At first, You can try to restart the device-manager from system tray.
If it doesn't help, then try the following:
- stop the device manager
- Remove c:\Docement and Settings\<your User>\javame-sdk folder.
- Ran the device manager from <SDK>/bin directory
- try to debug again.
Did you tried to change port 51307 to another.
Early access build had some problems with device manager, I hope that final release will be better :)
BR,
Igor

700w not recognized by Vista with windows mobile device center

please help:
i have a treo 700w that doesn't want to consistently connect to machine I am working on. when it works (rarely), it works fine, when it doesn't there is no explanation. I have restarted both computer and phone, and I can't seem to get a connection made.
Further I tried to uninstall/reinstall the windows mobile device center, i have removed the sync profiles on both my computer and phone, but nothing is seeming to work. I find it interesting that vista recognized my Smartphone USB device (it shows in the device manager), but that windows mobile device center doesn't show that anything is connected.
I am connecting via USB, but would be happy to connect via bluetooth, but when i try that approach, it only offers headset/wireless stereo (i'm looking for calendar/contacts/etc).
any direction would be wonderful - i have searched in google and subsequent pages for an hour already, and I'm thinking someone must have a better way.
Thanks,
-cb
PS - for those who are forum administrators, the registration process sucks: the password limitations are oddly strong for a simple forum like this, and when you don't put in a proper password from the get-go, it clears your prior selection of device/os/agreement registration, so when you fix the red flags (the password) and submit, it (and only then) tells you that you've forgotten to answer the questions below (that you had already answered before you were thwarted by the password reqs). sigh.
Post relates to: Treo 700w (Verizon)

Hi AlanG,
I have tried multiple USB connections, and do not have another sync cable. No luck.
Though, your post gave me an idea and that was to use a safety pin to scrape the contacts at the bottom of the phone. I keep the phone in my pocket most of the time, so there was some visible grime, though i would have guessed that the connection could have been made (it wasn't that grimy, just not shiny).
The other thing that was interesting is that when it was plugged in previous to the cleaning it shows the device connected to be a " smartphone usb sync ". Post cleaning, it now shows as a " PocketPC ". I'm not sure what the difference is, nor if I should be hoping that it reads "treo 700w", but hey, can't look a gift horse in the mouth, right?
So, that, in addition with removing all partnerships on both the machine and the treo (and after restarting my phone) it finally connected.
Wow. What a remarkable pain. Let's hope it keeps working.
Post relates to: Treo 700w (Verizon)

Windows Mobile Device Center no longer supported?

I have a customer that has some Motorola Windows Mobile 6.5 devices. They were trying to get their devices connected to their PCs with Windows Mobile Device Center and were running into problems. They contacted Microsoft Tech support and were
told that the Windows Mobile Device Center is no longer a supported product. Is there any truth to that? How the Windows Mobile 6.5 OS still be supported but the Windows Mobile Device Center is not? Their IT team will not let them install/use
Windows Mobile Device center now.

I think this is what you need. you can find the Microsoft product support lifecycle in here:
https://support.microsoft.com/lifecycle/search?sort=PN&alpha=windows+mobile+device&Filter=FilterNO
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How to Run a Hello World Java application on WIndows Mobile

Hi!
We have a sample Plug-in environment Java application downloaded from http://www-128.ibm.com/developerworks/library/os-ecl-ercp/index.html - IBM library.
We have downloaded the source files org.eclipse.testworkbenchapp_1.0.0.jar and tried running the application on desktop PC, this worked fine.
We are using Eclipse 3.2 to run this Java application on Desktop.
Now, we are trying to run the same application on Intermec Windows Mobile 5.0 device.
1. The device has IBM J9 ? WebSphere MicroEnvironment MIDP 2.0 for Windows Mobile2003 installed in it.
2. On installing this on Windows Mobile, in Start ? Programs ? we find MIDlet HQ - on launching this, opens a window with Install button.
3. On Click on Install button, another window opens which asks for URL to install.
4. In the URL Edit box, I give file:////Org.Eclipse.testWorkbenchapp.feature_1.0.0.jar which is present in \MyDocuments\Update site folder copied from desktop workspace via Active sync ? As mentioned in the above IBM library site.
5. I have also tried file:////MyDocuments\Updatesite\Org.Eclipse.testWorkbenchapp.feature_1.0.0.jar as input to URL.
6. On click OK, I get an error titled AMS Error with description The application descriptor was missing the required MIDlet Name field.
I am held up here and not able to move further.
As mentioned in the above IBM library site I tried downloading the update site folder via Eclipse ? Software Updates ? Find and Install in Help menu.
I selected Search for new features to install and browsed the Update site folder location present in my Eclipse workspace. This also does not work.
Any help in this regard in greatly appreciated. Thanks in advance!

I would ask such questions in the J2ME forums, or even better in a websphere forum, like here:
http://www-128.ibm.com/developerworks/forums/wsdd_forums.jsp

QTEK 9100 better known as wizard Windows Mobile 5 Phone

Similar Messages

Maybe you are looking for