QTPro shows reg# but not enabled after archive install

I bought QT Pro when it was 7.0.3 & Pro features worked fine. Then I recently 'archive & installed' my OSX to fix other bugs. Now QT doesn't launch as Pro, even though my 7.0.3 registration # does come up in the registration section. I have not upgraded QT since then, not going to re-buy Pro over and over, and can confirm that it is still 7.0.3 I'm running. Any ideas? Please help.

I think I figured it out. My ATI 9600Pro video card was missing some drivers after the archive/install. I read somewhere that archive/install doesn't necessarily archive eeeeverything.
Anyway, when I launched the ATI monitor program (on a lark) it said 'yo, I'm missing a few things, load up that DVD driver disk again." So I did and badabing, problem appears to have been solved.
QT still doesn't technically SAY it's pro still, but all the features are still there. So that's still a little wierd, but probably a different issue.
So thanks all for the efforts. Hopefully this'll help someone else someday.

Similar Messages

  • Compressor not working after archive & Install of OSX

    Greetings,
    I was getting TONS of kernal panics, and I had to archive and re-install OSX (which fixed the panics). Now Compressor will not submit to the queue. When I hit submit, cluster has no options in the drop down (I usually use 'this computer', which isn't there).
    If I hit 'submit', it says 'Unable to Submit to Queue: Please restart your computer or verify your Compressor installation is correct.'
    I tried re-starting with the same results. Anyone know my next step? Verify my installation is correct doesn't seem to make sense to me. What do they mean by verify? 'Yup Compressor is on the harddrive'????
    Any help would be great

    Click here and follow the instructions.
    (48877)

  • Jave installed but not enabled

    Sorry, I'm sure this is a basic question, that I should be able to figure out myself, but hopefully someone will be able to assist me. I am trying to enable Java so that I can use/access programs that uses the Sun Java applet. I've gone to my control panel and see that it's on my computer. I've tried to re-download/intall it but it says I already have it even after removing it. I've done the "test" and it says that it's intstalled but not enabled. I've gone to Tools--internet options--Security--Custom-- there only seems to be a java option under scripting, but I've seen recommendations to make sure it's enabled in another section, but that isn't an option. I do not see the Java coffee cup logo in my control panel either and I can not access the Sun Java Console under tools either. It's there, but nothing happens when I click on it. Sorry so long, just trying to give some background into what I've already tried. Thanks for any help

    I also have an hs_err file on my desktop that seems to be related.
    An unexpected exception has been detected in native code outside the VM.
    Unexpected Signal : EXCEPTION_ACCESS_VIOLATION (0xc0000005) occurred at PC=0x74D243F
    Function=Java_sun_awt_windows_WColor_getDefaultColor+0x2E1D
    Library=C:\Program Files\Java\j2re1.4.2_03\bin\awt.dll
    Current Java thread:
         at sun.awt.windows.WToolkit.eventLoop(Native Method)
         at sun.awt.windows.WToolkit.run(Unknown Source)
         at java.lang.Thread.run(Unknown Source)
    Dynamic libraries:
    0x00400000 - 0x00419000      C:\Program Files\Internet Explorer\iexplore.exe
    0x7C900000 - 0x7C9B0000      C:\WINDOWS\system32\ntdll.dll
    0x7C800000 - 0x7C8F4000      C:\WINDOWS\system32\kernel32.dll
    0x77C10000 - 0x77C68000      C:\WINDOWS\system32\msvcrt.dll
    0x77D40000 - 0x77DD0000      C:\WINDOWS\system32\USER32.dll
    0x77F10000 - 0x77F56000      C:\WINDOWS\system32\GDI32.dll
    0x77F60000 - 0x77FD6000      C:\WINDOWS\system32\SHLWAPI.dll
    0x77DD0000 - 0x77E6B000      C:\WINDOWS\system32\ADVAPI32.dll
    0x77E70000 - 0x77F01000      C:\WINDOWS\system32\RPCRT4.dll
    0x77760000 - 0x778CC000      C:\WINDOWS\system32\SHDOCVW.dll
    0x77A80000 - 0x77B14000      C:\WINDOWS\system32\CRYPT32.dll
    0x77B20000 - 0x77B32000      C:\WINDOWS\system32\MSASN1.dll
    0x754D0000 - 0x75550000      C:\WINDOWS\system32\CRYPTUI.dll
    0x76C30000 - 0x76C5E000      C:\WINDOWS\system32\WINTRUST.dll
    0x76C90000 - 0x76CB8000      C:\WINDOWS\system32\IMAGEHLP.dll
    0x77120000 - 0x771AC000      C:\WINDOWS\system32\OLEAUT32.dll
    0x774E0000 - 0x7761C000      C:\WINDOWS\system32\ole32.dll
    0x5B860000 - 0x5B8B4000      C:\WINDOWS\system32\NETAPI32.dll
    0x771B0000 - 0x77256000      C:\WINDOWS\system32\WININET.dll
    0x76F60000 - 0x76F8C000      C:\WINDOWS\system32\WLDAP32.dll
    0x77C00000 - 0x77C08000      C:\WINDOWS\system32\VERSION.dll
    0x773D0000 - 0x774D2000      C:\WINDOWS\WinSxS\x86_Microsoft.Windows.Common-Controls_6595b64144ccf1df_6.0.2600.2180_x-ww_a84f1ff9\comctl32.dll
    0x7C9C0000 - 0x7D1D4000      C:\WINDOWS\system32\SHELL32.dll
    0x5D090000 - 0x5D127000      C:\WINDOWS\system32\comctl32.dll
    0x5AD70000 - 0x5ADA8000      C:\WINDOWS\system32\uxtheme.dll
    0x75F80000 - 0x7607C000      C:\WINDOWS\system32\BROWSEUI.dll
    0x20000000 - 0x20012000      C:\WINDOWS\system32\browselc.dll
    0x77B40000 - 0x77B62000      C:\WINDOWS\system32\appHelp.dll
    0x76FD0000 - 0x7704F000      C:\WINDOWS\system32\CLBCATQ.DLL
    0x77050000 - 0x77115000      C:\WINDOWS\system32\COMRes.dll
    0x77260000 - 0x772FE000      C:\WINDOWS\system32\urlmon.dll
    0x77FE0000 - 0x77FF1000      C:\WINDOWS\system32\Secur32.dll
    0x77A20000 - 0x77A74000      C:\WINDOWS\System32\cscui.dll
    0x76600000 - 0x7661D000      C:\WINDOWS\System32\CSCDLL.dll
    0x77920000 - 0x77A13000      C:\WINDOWS\system32\SETUPAPI.dll
    0x10000000 - 0x1001D000      c:\progra~1\mcafee.com\vso\mcvsshl.dll
    0x014C0000 - 0x014C4000      c:\progra~1\mcafee.com\vso\ShlRes.dll
    0x01500000 - 0x01588000      C:\WINDOWS\system32\shdoclc.dll
    0x01790000 - 0x0179C000      C:\Program Files\Adobe\Acrobat 6.0\Reader\ActiveX\AcroIEHelper.dll
    0x017C0000 - 0x017DF000      C:\WINDOWS\system32\dla\tfswshx.dll
    0x017E0000 - 0x017EF000      C:\WINDOWS\system32\tfswapi.dll
    0x017F0000 - 0x0182B000      C:\WINDOWS\system32\dla\tfswcres.dll
    0x75E90000 - 0x75F40000      C:\WINDOWS\system32\SXS.DLL
    0x01890000 - 0x01B55000      C:\WINDOWS\system32\xpsp2res.dll
    0x75CF0000 - 0x75D81000      C:\WINDOWS\system32\mlang.dll
    0x71AD0000 - 0x71AD9000      C:\WINDOWS\system32\wsock32.dll
    0x71AB0000 - 0x71AC7000      C:\WINDOWS\system32\WS2_32.dll
    0x71AA0000 - 0x71AA8000      C:\WINDOWS\system32\WS2HELP.dll
    0x71A50000 - 0x71A8F000      C:\WINDOWS\system32\mswsock.dll
    0x662B0000 - 0x66308000      C:\WINDOWS\system32\hnetcfg.dll
    0x71A90000 - 0x71A98000      C:\WINDOWS\System32\wshtcpip.dll
    0x76EE0000 - 0x76F1C000      C:\WINDOWS\system32\RASAPI32.DLL
    0x76E90000 - 0x76EA2000      C:\WINDOWS\system32\rasman.dll
    0x76EB0000 - 0x76EDF000      C:\WINDOWS\system32\TAPI32.dll
    0x76E80000 - 0x76E8E000      C:\WINDOWS\system32\rtutils.dll
    0x76B40000 - 0x76B6D000      C:\WINDOWS\system32\WINMM.dll
    0x77C70000 - 0x77C93000      C:\WINDOWS\system32\msv1_0.dll
    0x76D60000 - 0x76D79000      C:\WINDOWS\system32\iphlpapi.dll
    0x722B0000 - 0x722B5000      C:\WINDOWS\system32\sensapi.dll
    0x769C0000 - 0x76A73000      C:\WINDOWS\system32\USERENV.dll
    0x7D1E0000 - 0x7D492000      C:\WINDOWS\system32\msi.dll
    0x02020000 - 0x0203C000      c:\progra~1\mcafee.com\vso\McVSSkt.dll
    0x76F20000 - 0x76F47000      C:\WINDOWS\system32\DNSAPI.dll
    0x76FC0000 - 0x76FC6000      C:\WINDOWS\system32\rasadhlp.dll
    0x76980000 - 0x76988000      C:\WINDOWS\system32\LINKINFO.dll
    0x76990000 - 0x769B5000      C:\WINDOWS\system32\ntshrui.dll
    0x76B20000 - 0x76B31000      C:\WINDOWS\system32\ATL.DLL
    0x7D4A0000 - 0x7D783000      C:\WINDOWS\system32\mshtml.dll
    0x746C0000 - 0x746E7000      C:\WINDOWS\system32\msls31.dll
    0x746F0000 - 0x7471A000      C:\WINDOWS\system32\msimtf.dll
    0x74720000 - 0x7476B000      C:\WINDOWS\system32\MSCTF.dll
    0x76390000 - 0x763AD000      C:\WINDOWS\system32\IMM32.DLL
    0x75C50000 - 0x75CBE000      C:\WINDOWS\system32\jscript.dll
    0x74C80000 - 0x74CAC000      C:\WINDOWS\system32\OLEACC.DLL
    0x76080000 - 0x760E5000      C:\WINDOWS\system32\MSVCP60.dll
    0x72D20000 - 0x72D29000      C:\WINDOWS\system32\wdmaud.drv
    0x72D10000 - 0x72D18000      C:\WINDOWS\system32\msacm32.drv
    0x77BE0000 - 0x77BF5000      C:\WINDOWS\system32\MSACM32.dll
    0x77BD0000 - 0x77BD7000      C:\WINDOWS\system32\midimap.dll
    0x66E50000 - 0x66E8F000      C:\WINDOWS\system32\iepeers.dll
    0x73000000 - 0x73026000      C:\WINDOWS\system32\WINSPOOL.DRV
    0x76200000 - 0x76271000      C:\WINDOWS\system32\mshtmled.dll
    0x73300000 - 0x73367000      C:\WINDOWS\system32\vbscript.dll
    0x73DD0000 - 0x73ECE000      C:\WINDOWS\system32\MFC42.DLL
    0x03930000 - 0x03AD7000      C:\WINDOWS\system32\macromed\flash\Flash.ocx
    0x763B0000 - 0x763F9000      C:\WINDOWS\system32\comdlg32.dll
    0x6D430000 - 0x6D43A000      C:\WINDOWS\system32\ddrawex.dll
    0x73760000 - 0x737A9000      C:\WINDOWS\system32\DDRAW.dll
    0x73BC0000 - 0x73BC6000      C:\WINDOWS\system32\DCIMAN32.dll
    0x79170000 - 0x79196000      C:\WINDOWS\system32\mscoree.dll
    0x79410000 - 0x79425000      C:\WINDOWS\Microsoft.NET\Framework\v1.1.4322\mscorie.dll
    0x7C340000 - 0x7C396000      C:\WINDOWS\Microsoft.NET\Framework\v1.1.4322\MSVCR71.dll
    0x79480000 - 0x79499000      C:\WINDOWS\Microsoft.NET\Framework\v1.1.4322\mscorld.dll
    0x71D40000 - 0x71D5C000      C:\WINDOWS\system32\actxprxy.dll
    0x6CC60000 - 0x6CC6B000      C:\WINDOWS\system32\dispex.dll
    0x66880000 - 0x6688C000      C:\WINDOWS\system32\ImgUtil.dll
    0x5E310000 - 0x5E31C000      C:\WINDOWS\system32\pngfilt.dll
    0x6D440000 - 0x6D450000      C:\Program Files\Java\j2re1.4.2_03\bin\npjpi142_03.dll
    0x5EDD0000 - 0x5EDE7000      C:\WINDOWS\system32\OLEPRO32.DLL
    0x6D310000 - 0x6D327000      C:\Program Files\Java\j2re1.4.2_03\bin\jpiexp32.dll
    0x76FB0000 - 0x76FB8000      C:\WINDOWS\System32\winrnr.dll
    0x6D380000 - 0x6D398000      C:\Program Files\Java\j2re1.4.2_03\bin\jpishare.dll
    0x08000000 - 0x08138000      C:\PROGRA~1\Java\J2RE14~1.2_0\bin\client\jvm.dll
    0x029B0000 - 0x029B7000      C:\PROGRA~1\Java\J2RE14~1.2_0\bin\hpi.dll
    0x033F0000 - 0x033FE000      C:\PROGRA~1\Java\J2RE14~1.2_0\bin\verify.dll
    0x03400000 - 0x03419000      C:\PROGRA~1\Java\J2RE14~1.2_0\bin\java.dll
    0x03420000 - 0x0342D000      C:\PROGRA~1\Java\J2RE14~1.2_0\bin\zip.dll
    0x07460000 - 0x0756F000      C:\Program Files\Java\j2re1.4.2_03\bin\awt.dll
    0x07670000 - 0x076C0000      C:\Program Files\Java\j2re1.4.2_03\bin\fontmanager.dll
    0x73940000 - 0x73A10000      C:\WINDOWS\system32\D3DIM700.DLL
    0x6D2F0000 - 0x6D304000      C:\Program Files\Java\j2re1.4.2_03\bin\jpicom32.dll
    0x03500000 - 0x0350F000      C:\Program Files\Java\j2re1.4.2_03\bin\net.dll
    0x04360000 - 0x04382000      C:\Program Files\Java\j2re1.4.2_03\bin\dcpr.dll
    0x5FF20000 - 0x5FF46000      C:\WINDOWS\system32\MSRATING.dll
    0x5FF50000 - 0x5FF61000      C:\WINDOWS\system32\msratelc.dll
    0x59A60000 - 0x59B01000      C:\WINDOWS\system32\DBGHELP.dll
    0x76BF0000 - 0x76BFB000      C:\WINDOWS\system32\PSAPI.DLL
    Heap at VM Abort:
    Heap
    def new generation total 576K, used 283K [0x10020000, 0x100c0000, 0x10780000)
    eden space 512K, 49% used [0x10020000, 0x1005f758, 0x100a0000)
    from space 64K, 45% used [0x100b0000, 0x100b7548, 0x100c0000)
    to space 64K, 0% used [0x100a0000, 0x100a0000, 0x100b0000)
    tenured generation total 1408K, used 504K [0x10780000, 0x108e0000, 0x16020000)
    the space 1408K, 35% used [0x10780000, 0x107fe098, 0x107fe200, 0x108e0000)
    compacting perm gen total 4608K, used 4490K [0x16020000, 0x164a0000, 0x1a020000)
    the space 4608K, 97% used [0x16020000, 0x16482860, 0x16482a00, 0x164a0000)
    Local Time = Fri Jan 07 21:17:46 2005
    Elapsed Time = 658
    # The exception above was detected in native code outside the VM
    # Java VM: Java HotSpot(TM) Client VM (1.4.2_03-b02 mixed mode)
    #

  • My laptop doesn't show anything but the mouse after the logon page at windows 8.1

    my laptop doesn't show anything but the mouse after the logon page at windows 8.1..Acer E5 473G 57QQ

    Hi there! When I read your post, I realized that a clean boot or a safe mode might help. I suggest you read the articles on them if you are not familiar. However, a legacy boot menu to enter a safe mode is unfortunately difficult in windows 8.1 as revealed in method 5 of the following article http://www.7tutorials.com/5-ways-boot-safe-mode-windows-8-windows-81 I am sorry that I was unable to provide a solution directly but hope that this reply will give a direction..............

  • When I check for software updates only itunes and random other updates show up but not security updates or safari update. When i check installed updates I realized my last security update was 2011-004 and I still have safari 5.0.6. Can anyone help me?

    When I check for software updates only itunes and random other updates show up but not security updates or safari update. When i check installed updates I realized my last security update was 2011-004 and I still have safari 5.0.6. Can anyone help me?

    Don't panic. OS X 10.5.8 is the most popular PowerPC OS out there. People run it everyday without security breaches, including myself. It isn't Windows!
    If you're really that worried, I highly recommend Sophos Anti-Virus for Mac Home Edition. Supports PowerPC & Intel and Mac OS X 10.4-10.7.
    http://www.sophos.com/en-us/products/free-tools/sophos-antivirus-for-mac-home-ed ition/system-requirements.aspx
    Direct download: http://downloads.sophos.com/home-edition/savosx_73_he.dmg

  • Finder shows some but not all files in a folder

    In some circumstances, Finder only shows some (but not all) of the files in a folder. Why?
    I notice this with Excel autosave files in the Office 2011 Autorecovery folder (Macintosh HD ▸ Users ▸ Conor ▸ Library ▸ Application Support ▸ Microsoft ▸ Office ▸ Office 2011 AutoRecovery). In my case, Finder shows 34 files but "ls" in a Terminal window reports 40 files. The missing files do not start with a period (.) and have the same permissions as other files that show in Finder (-rw-r--r--@ 1 <myname>  staff). Here's the last four lines of "ls -al" - the first two appear in Finder, but not the last two:
    -rw-r--r--@  1 myname  staff    55296  8 Oct  2013 Word Work File D_1239425731.tmp
    -rw-r--r--@  1 myname  staff    55296  8 Oct  2013 Word Work File D_1240072173.tmp
    -rw-r--r--@  1 myname  staff    52796 13 Feb 11:08 safe1.xlk
    -rw-r--r--@  1 myname  staff    95320 12 Mar 16:06 safe2.xlk
    I have tried copying files from this folder to another folder, and/or changing their names. They still do not appear in Finder, nor are they visible in the File Open dialog of applications, even when the dialog is listing other files in that directory - but if I manually type the name into the File Open dialog, the app manages to find and open the file.
    If I Spotlight-search for the file name, or search in Finder, without specifying that specific directory ("This Mac"), the file is not found, but if I direct the Finder search at that particular directory, then the search returns the relevant files.
    So: why does Finder hide certain files when showing a folder, even though it can find and show those files if you specifically ask for them?
    Now using OSX 10.10 (Yosemite), but I'm pretty sure I noticed this on OSX 10.8 as well.

    So simple - thanks. I'd not been aware of the hidden flag, and now I've found the -O option on ls to display it.
    Follow-on question: I now see that you can change the system-wide defaults to display hidden files with this...
         defaults write com.apple.finder AppleShowAllFiles -boolean true ; killall Finder
    ...but is there a way to specify this on a per folder basis? I'm happy enough to hide hidden files in general, but it would be nice if I could set an attribute/flag/whatever on the Office AutoRecovery directory that told Finder "in this folder, always display hidden files". Can I do this?

  • Power book G4 Leopard 10.5.8. File sharing preference checked but not working after start up until unchecked and the rechecked?

    I hope the title is enough info, please ask. In the mean time I have created an applescript to open preferences/ sharing and uncheck then check the file sharing box. This works but I would obviously prefer it just work normally. I have no corrupt preference files. Perhaps a file is missing? Thank you.

    Greetings Kwnez
    I'm not up to your level of expertise yet. I'm networking and file sharing too, on my Mac Powerbook 1.33 GHz PowerPC G4; OS 10.5.8 Lepoard. At the public library I found by asking the clerk a book Authored by David Pogue. "Mac OS X Leopard the Missing Manual". It (the book) has helped me ask better questions. I'm not saying that your question "
    Power book G4 Leopard 10.5.8. File sharing preference checked but not working after start up until unchecked and the rechecked?
    is hard for me to understand, I went to system preferences and looked at the sharing box. when I clik it it opens up and the first thing I see is my computers name, and under that i see, " Computers on your local network can access your computer at: ...-powerbook-g4-15.local"
    What I'm saying is "Are we on the same Page"

  • HT1455 I have started my computer in safe mode as recommended but not long after the grey Apple icon appears with the spinning gear it automatically shuts down! any suggestions?

    I have started my computer in safe mode as recommended but not long after the grey Apple icon appears with the spinning gear it automatically shuts down! any suggestions?

    Try these options:
    Credit Kappy.
    This support article addresses a 'blue scree';
    http://support.apple.com/kb/PH7212
    Ciao.

  • Flash Player is pre-installed in Google Chrome, but not enabled. Flash Player is not there among the plug-ins.

    Flash Player is pre-installed in Google Chrome (Windows7), but not enabled and it is also not there among the list of plug-ins.

    As we don't have any control over the installation process on Chrome, you'd need to seek help in the Chrome forums.
    That said, this seems very odd.
    Type the following in the address bar:
    chrome://plugins/
    Click Details and expand the list.
    Scroll down, and you should be able to find Adobe Flash Player in the list.
    If it's not there, I'd remove Chrome and just download it again from Google.
    Also, do you have any security or privacy software (maybe from a not-so-mainstream vendor?) that might helpfully remove Flash Player for you?

  • HT1923 Before I un-install itunes has anyone had a problem getting an ipad mini to show up in itunes as a device when connected to the computer? My old ipad shows up but not the new mini.

    Before I un-install itunes has anyone had a problem getting an ipad mini to show up in itunes as a device when connected to the computer? My old ipad shows up but not the new mini.

    Just wondered if anyone had any other suggestions.

  • Email will receive but not send after installing os7 on iPhone 4S

    Email will receive but not send after installing os7 on iPhone 4S.   Checked all settings against iPad and second 4s phone and they appear identical.  Other devices work fine.

    Thanks Spaidr,
    That was part of it.  I did an end-around by setting up an alternate outgoing (send) server which was the same as the primary, identical settings, name, password.  I deselected the primary and used only the secondary.  Reboot as you suggested and Voila!  Something must have been corrupted in the primary.
    Thanks and hope this helps others.  

  • HT201401 my iPhone 4s  fails to turn on. When I press the sleep button the apple logo shows displays but nothing happens after that

    iphone fails to turn on. The apple logo shows up but nothing happens after that

    Hi Haleynichole_99!
    I have an article here with some troubleshooting steps that can help you resolve this issue with your iOS device:
    iOS: Unable to update or restore
    http://support.apple.com/kb/HT1808
    Thanks for using the Apple Support Communities!
    Cheers,
    Braden

  • Internet showing up but not working iTouch 4th Gen

    Help my Internet connection Is showing up but not working. it happens when the Internet goes off the router then resets it self which it for everything except my iPod :( Please help we've reset it again :( but no luck

    Please help does anyone know what to do?

  • Mac book pro will not sleep after i installed mavericks

                mac book pro will not sleep after i installed mavericks the sleep indicator light stays solid and fans still run but the display turns off

                mac book pro will not sleep after i installed mavericks the sleep indicator light stays solid and fans still run but the display turns off

  • Security and privacy system preferences not working after Lion install.  What to do?

    Security and privacy system preference not working after Lion install.  Not sure if it happen with Lion installer or after updating. What to do?

    Please read this whole message before doing anything.
    This procedure is a diagnostic test. It won’t solve your problem. Don’t be disappointed when you find that nothing has changed after you complete it.
    Third-party system modifications are a common cause of usability problems. By a “system modification,” I mean software that affects the operation of other software — potentially for the worse. The following procedure will help identify which such modifications you've installed. Don’t be alarmed by the complexity of these instructions — they’re easy to carry out and won’t change anything on your Mac.
    These steps are to be taken while booted in “normal” mode, not in safe mode. If you’re now running in safe mode, reboot as usual before continuing.
    Below are instructions to enter some UNIX shell commands. The commands are harmless, but they must be entered exactly as given in order to work. If you have doubts about the safety of the procedure suggested here, search this site for other discussions in which it’s been followed without any report of ill effects.
    Some of the commands will line-wrap or scroll in your browser, but each one is really just a single line, all of which must be selected. You can accomplish this easily by triple-clicking anywhere in the line. The whole line will highlight, and you can then either copy or drag it. The headings “Step 1” and so on are not part of the commands.
    Note: If you have more than one user account, Step 2 must be taken as an administrator. Ordinarily that would be the user created automatically when you booted the system for the first time. The other steps should be taken as the user who has the problem, if different. Most personal Macs have only one user, and in that case this paragraph doesn’t apply.
    Launch the Terminal application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ If you’re running Mac OS X 10.7 or later, open LaunchPad. Click Utilities, then Terminal in the page that opens.
    When you launch Terminal, a text window will open with a line already in it, ending either in a dollar sign (“$”) or a percent sign (“%”). If you get the percent sign, enter “sh” (without the quotes) and press return. You should then get a new line ending in a dollar sign.
    Step 1
    Copy or drag — do not type — the line below into the Terminal window, then press return:
    kextstat -kl | awk '!/com\.apple/{printf "%s %s\n", $6, $7}'
    Post the lines of output (if any) that appear below what you just entered (the text, please, not a screenshot.) You can omit the final line ending in “$”.
    Step 2
    Repeat with this line:
    sudo launchctl list | sed 1d | awk '!/0x|com\.(apple|openssh|vix)|edu\.mit|org\.(amavis|apache|cups|isc|ntp|postfix|x)/{print $3}'
    This time, you'll be prompted for your login password, which won't be displayed when you type it. You may get a one-time warning not to screw up. You don't need to post the warning.
    Note: If you don’t have a login password, you’ll need to set one before taking this step. If that’s not possible, skip to the next step.
    Step 3
    launchctl list | sed 1d | awk '!/0x|com\.apple|edu\.mit|org\.(x|openbsd)/{print $3}'
    Step 4
    ls -1A /e*/mach* {,/}L*/{Ad,Compon,Ex,Fram,In,Keyb,La,Mail/Bu,P*P,Priv,Qu,Scripti,Servi,Spo,Sta}* L*/Fonts 2> /dev/null
    Important: If you synchronize with a MobileMe account, your me.com email address may appear in the output of the above command. If so, anonymize it before posting.
    Step 5
    osascript -e 'tell application "System Events" to get name of every login item' 2> /dev/null
    Remember, steps 1-5 are all drag-and-drop or copy-and-paste, whichever you prefer — no typing, except your password. Also remember to post the output.
    You can then quit Terminal.

Maybe you are looking for