QTs from compressor not uploading on youtube?

I've done this before, just not recently.  Can't get these things past the 1% range.  They loaded with no problem on vimeo.  Full res from FCP into compressor with the "you tube sharing" setting.  I did turn the frame controls on and set them to "best" but I've done that in the past I think.
Thanks in advance.

> It's 268mb.  That shouldn't be a problem should it?<
Those are questions for Youtube, not FCP users.
bogiesan
Message was edited by: David Bogie Chq-1

Similar Messages

  • Premiere Elements 10 not Uploading to YouTube

    As with other threads, upload to YouTube is suddenly failing for me with "Online Services encountered an error". Since upload to YouTube is my main use for PE10 this is more than a little bit unsatisfactory. Any fixes?
    Andrew

    Andrew
    We are on the same wavelength. I just saw your post in that other thread and was going to suggest that you post in this thread so that we could continue troubleshooting your YouTube issue.
    When I saw your post, I immediately went to my Premiere Elements 10 Windows 7 64 bit to try for the Share/Online/YouTube, thinking it possible that the fix may have become unfixed.
    Good news and bad news. I had no problems with the Premiere Elements 10 upload to YouTube from within Premiere Elements 10
    (4:53 PM  Monday March 24, 2014, East Time Zone USA).
    1. With your YouTube issue, are you still getting the Online Services error message? Or has the error message changed to something else?
    2. Could you
    a. Go to Edit Menu/Preferences/Web Sharing and do a Refresh of Online Services if you have not already.
    b. If you use a router for your computer, turn it off for about 30 seconds and back on.
    c. What browser do you use? If FIrefox, clear out the Cache Web Content.....Options/Content/Network/Cache Web Content.
    Did any of the above have any impact on your YouTube problem?
    ATR
    Do not give up.
    ATR

  • IMovie 11 is not uploading to Youtube after finalization.

    I am trying to upload a 2:49 minute long movie to YouTube, but am currently unsuccesful.
    The project is finished being finalized (720p), but after it goes through the long process of "uploading to Youtube", there isn't a notification with a link for the video and it isn't on my channel. It seems the project is cancelled by YouTube at the last second, and it's getting quite frustrating.
    What exactly is the problem? Is there some sort of workaround I can use to upload the video?

    I think this may be the quickest workaround:
    Go to Share Menu > Export Movie... (set it to 720p) and save it to the Desktop
    Open the YouTube website in your favorite web browser, login to your account.
    Go to the YouTube upload page, and have it upload the video fromo your Desktop
    The beauty of this versus the iMovie upload is the status messages are a little more reassuring as it progresses. I always feel like I know how much longer I need to wait. And then at the end it gives you the URL to see the video after it post-processes the whole thing. So publishing direct, will get around this problem.
    As for the problem, itself. I've ready many people's posts to the iMovie Discussion group with a similar YouTube upload from iMovie problem. No one to my recollection has written back with a description of a fix for this. Some people couldn't login to YouTube at all through iMovie it wouldn't accept their credentials. That was fixed by using the correct username for the YouTube account after Google took them over (some people had a username, other used an email address for their username). It sounds more like the upload is failing than the username and password not being accepted. So I would just do the workaround unless you wanted to test iMovie again in the future to see if it suddenly starts working again.

  • Imovie 11 not uploading to youtube

    Edit a video in iMovie 11, as I have always done.  Current upload to YOUTUBE continues to lose connection to server.  My internet connection is running correctly.  I have uploaded videos directly to youtube via the site with no problems to test if there was a connection to server issue as well.
    I tried to upload video to via the youtube site and it stops uploading around 60%.  Mind you I DID upload this same video 3 days ago after trying 13 times via the youtube site.  I had to take it down because I accidently allowed youtube to do one of the "fixes" to my videdo and it ruined it and I was able to unapply it.
    So 3 days later my video will NOT upload via iMovie 11 or directly from the site.
    The file is only 312.1 MB and the format is .mov
    So not sure why I am having issues.

    I think this may be the quickest workaround:
    Go to Share Menu > Export Movie... (set it to 720p) and save it to the Desktop
    Open the YouTube website in your favorite web browser, login to your account.
    Go to the YouTube upload page, and have it upload the video fromo your Desktop
    The beauty of this versus the iMovie upload is the status messages are a little more reassuring as it progresses. I always feel like I know how much longer I need to wait. And then at the end it gives you the URL to see the video after it post-processes the whole thing. So publishing direct, will get around this problem.
    As for the problem, itself. I've ready many people's posts to the iMovie Discussion group with a similar YouTube upload from iMovie problem. No one to my recollection has written back with a description of a fix for this. Some people couldn't login to YouTube at all through iMovie it wouldn't accept their credentials. That was fixed by using the correct username for the YouTube account after Google took them over (some people had a username, other used an email address for their username). It sounds more like the upload is failing than the username and password not being accepted. So I would just do the workaround unless you wanted to test iMovie again in the future to see if it suddenly starts working again.

  • How do I save in a .mov in v10 so I can upload to youtube?

    Really struggling with v10.  When I hit share - file it does not give me an option for file extensions and instead only exports as an mp4 which will not upload to youtube.  The share to youtube feature is worthless because when I attempt it, says sign up is required but when I have my own channel with subscribers, clearly I've signed up.  Can anyone help me with any way to export in a file format that will allow me to upload to youtube?  Thank you so much for your help!!!!!!!

    Premiere
    What version of Premiere Elements are you using and on what computer operating system is it running?
    What is the player that you are using?
    For now, I will assume that you are using Premiere Elements 11, 12, or 13 on Windows 7, 8, or 8.1 64 bit.
    What are the properties of what you are putting on the project's Timeline?
    And, what are your project settings?
    The basic idea is to set up the project settings (you manually or the project automatically) to match your source properties.
    After the editing phase and you are ready to export to a file saved to the computer hard drive, you go to Publish+Share/
    Computer/ and make your choice. There is more than you can see for Computer choices. You use the thin scroll bar
    to the right of the choices to scroll down to see the whole list.
    If you want an export with a .mp4 file extension, then you should be looking at
    Publish+Share
    Computer
    AVCHD
    with one of the MP4 presets described with the properties comparable to your source.
    You can also find an .mp4 export under
    Publish+Share
    Mobile Phones and Players
    If you obtained a file with a .mpg file extension, I am guessing that you got as far as what you could see, that is, Publish+Share/Computer/MPEG.
    Lots of possibilities...but keep in mind that .mp4 is just a file extension (container/wrapper format that wraps the important video and audio compressions).
    So, we can discuss that further.
    ATR

  • Adobe Premiere Elements 13 not uploading/exporting to YouTube or computer

    I have posted 2 videos to YouTube both by exporting them into an MP4 file and then manually uploading it to YouTube. For some reason after editing my 3rd video, it all the sudden seems to not be working. I've tried exporting and uploading to YouTube through APE 13. This is very frustrating and I need this problem fixed ASAP. This is definitely disrupting my flow on my YouTube channel. I have tried uploading/exporting more than once along with restarting the program and my computer. I do not know what else to do. I appreciate any help I can get.

    Please be advised that I'm very new to PE 13 but have been computing a very long number of years and didn't expect to have a problem with simple saving to youtube from PE.
    I have previously uploaded one file to YouTube with no problems.
    The error message after a 98% run is a online error, but sorry I can't remember complete message.
    I've only ever used Publish and Share with mp4 presets.The first and only one previous was 15 mins long with no trouble at all in uploading.
    Doesn't even get to YouTube.
    Content has only ever been video.
    I've tried another computer but same results and both are Apple Mac's
    The duration is just over 10 mins
    I've had success with burning to Disc enabling a file save.
    Seems I'm not the only one with this problem.
    Why first file uploaded to YouTube and I cannot upload now is baffling me.
    Any suggestions will be much appreciated believe me.
    With many thanks for your welcome reply.
    John G
    t

  • I'm new to FCPX and Compressor 4.  My HD video looks terrible when uploaded to YouTube and are no longer 720 or 1080p HD.  Are there codes or a secret handshake to have my HD video remain HD on youtube.  All help appreciated.

    I have been editing in FCP X 10.0.6 and have had success with that on my Mac Book Pro Retina.  But when I go to compress the 1 minute video detined for YouTube inputing that I wish for it to remain in HD (720 and or 1080p) via Compressor 4, the video compresses and I upload it to youtube via their uploader and when the video is played back it looks aweful.  Needless to say it is no longer HD and very blurry.  Is there any help you can give me with step by step codes to follow to ensure my 1 minute video is viewable in HD? I sure would appreciate it. Thanks in advance.  

    Thanks a million Russ for you time and input.  I have recompressed my project several times and that aspect has worked a charm.  But I seem to come unstuck when I upload my compressed video to youtube only.  All the presets seem fine and I have done it using either ProRes or Youtube/Vimeo HD options.  I have just left them on my desktop and uploaded to youtube via their uploader from there after sucessfully compressing them with Compressor 4.  Yet, there seems to be no improvement in the picture quality.  Mind you the sound is fine.  I will get busy with some screenshots if you still think they would be handy.  Many thanks again for your consideration. I really had hoped it was as simple as a secret handshake too. Darn. LOL  -RR

  • CD's not purchased from iTunes but uploaded to iTunes do not show up in the music folder on Apple TV!  How can I fix this?

    CD's purchased from iTunes but uploaded to iTunes do not show up in the music folder on my Apple TV!  How do I fix this?

    You would need to make sure you're accessing the Computers icon. If you are under the Music icon, that will be accessing the cloud and only show iTunes purchases (unless you subscribe to iTunes Match)

  • Data is not uploaded from the dso to the cube

    Dear Experts,
    In one of my process chains the data is not uploaded from the dso to the cube .
    I have tried to upload the data month wise also but still after certain data records the data gets stuck up.
    I have recreated the indexes also.
    When I am checking in DB02 the table space is shown as 18491 MB.The used space is 97%.
    Please suggest.

    Hi.....
    I didn't get your point........what have you mention that you have recreated the index before loading....
    Basically.the process should be........Delete index --> Load --> Create index......
    You have mentioned that 97% of the memory space is in use........please check with the basis team once......
    Also, in SM37 check if any such job is there which is running for a long time but not progressing......or which you think you don't need......then kill that job......
    Regards,
    Debjani.....

  • Someone made a purchase from my Apple ID to a device that was not mine – I received an email stating that this happened, yet the only solution that Apple gave me was to change my password. I can see the $20.00 purchase that was not uploaded to any of my d

    Someone made a purchase from my Apple ID to a device that was not mine – I received an email stating that this occurred, yet the only solution that Apple gave me was to change my password. When I look at my account, I can see the $20.00 purchase of music volumes that I did not purchase myself and was not uploaded to any of my devices; however, I cannot find a solution to getting my money back or to file a complaint against the unknown person that did this. Additionally, how do we prevent something like this from happening again, especially when I have an iPhone? What can I do in this situation?

    Thank you for the suggestion. I did change the password; however, I generally will purchase gift cards to link to the account so that if something like this ever happened it would not be taken out of a credit card or bank account.

  • I purchased audio book from iTunes store. It shows up in my iTunes library but is not uploading to my ipod Touch, even though my computer is authorized. Any suggestions?

    I purchased an audio book from iTunes store. It successfully downloaded to my iTunes library< but will not upload to my ipod Touch, even though my computer is authorized. Any suggestions? Any and all are greatly appreciated.

    If your iTunes is set on manual sync, then you have to manually drag and drop. Otherwise every time yousyncyou'll get all changes even if you don't want it.

  • I recently upgraded my MacBook from 10.5.8 to 10.6.8 Snow Leopard. Now when I create a song in Garage Band 2008, I cannot save the volume adjustment when I share back to iTunes and ultimately upload to YouTube. The volume reverts back to a default? low l

    I recently upgraded my MacBook from 10.5.8 to 10.6.8 Snow Leopard. Now when I create a song in Garage Band 2008, I cannot save the volume adjustment when I share back to iTunes, which is now version 11.1.1, and ultimately upload to YouTube. The volume reverts back to a default? low level. How can I retain the volume I assign in Garage Band, so that when the song moves to iTunes it doesn't revert?

    I recently upgraded my MacBook from 10.5.8 to 10.6.8 Snow Leopard. Now when I create a song in Garage Band 2008, I cannot save the volume adjustment when I share back to iTunes, which is now version 11.1.1, and ultimately upload to YouTube. The volume reverts back to a default? low level. How can I retain the volume I assign in Garage Band, so that when the song moves to iTunes it doesn't revert?

  • "Import from Text File" & "Upload from Clipboard" icon not appearng in F110

    Hi Experts,
    While making the payment to the vendors through TN F110, in "PARAMETER" screen just next to 'STATUS' screen, there is a vendor field for selection in range and just ahead of this there is an icon for multiple vendor selection ( Bold arrow mark ). If I click on that multiple vender selection icon ( on bold arrow mark ), an another screen opens for multiple selection for vendors. In this screen 'Enter, Copy, Delete etc' icons are appearing at the bottom of the screen but "Import from Text File" & "Upload from Clipboard" icon are not appearing there.
    Can you please let me know how to bring that icons there?
    Points would be awarded.
    Rgds,
    Shailesh

    Hi Ravi,
    I have not yet created anything and have just entered the parameter. In the multiple screen for vendors there are 5 fields for individual and 5 for range selection. Even you can put more than five range selections or individual selections by clicking on the page button but there I am not finding these two icons.
    Can you please check at your end and let me know if you are getting or what to do to bring those two icons in F110.
    Rgds,
    Shailesh

  • Photo will not upload my pictures from the same camera that always worked in IPhoto.  Says "could not be imported (may be unrecognized file type or files may not contain valid data).  So how do I do it?

    Photo will not upload new photos from same camera that always worked in IPhoto.  Says "could not be uploaded )may be unrecognized file type or files may not contain valid data).  Help!

    Try image capture or a card reader - after the photos are safely on your Mac then use the camera's format command to reformat the memory card
    LN

  • Icloud photo does not upload from iphone

    Dear Apple (yes other users I know this is not for Apple. Like many I am fed up by not seeing this issue fix even after OS 10.10.3 and iOS 8.3, so pardon me if I'm a bit testy).
    For many many months since the iCloud Photo Beta we (I will take the liberty to speak for others in another thread that was titled 'beta' and we have been chastised and told in no uncertain terms to start a new thread so here)... have had situations where iPhone and iPad will not upload new photos to iCloud Photo. nor does it download 'as advertised'.
    Please don't ask us if we have tried turning iCloud Photo off-on-off on our iOS devices, we have.
    Left iPhoto in 10.10.3 running... turned everything off everywhere... turned it back on everywhere...
    Submitted (me, probably 5 times) to the Feedback APple or whatever it is called.
    Submitted error reports from iCloud Photo on the web which cannot start do anything... about 5 times...
    So, till now nothing.
    But I will help to grow your $180bn reserves by feeding a measly $3.99 a month for 250GB (or is that $2.99? can't remember now)... for NOTHING. At least I'm keeping some allocation warm.
    My love to Tim and all the guys and gals
    I don't know what else to do. It's not like if you have a problem one can actually hear/get indication from anyone at Apple on what to do/how to do etc..
    So, here I am starting a new thread as 'suggested' by so many people... I am sure others will provide factual/objective reports sans sarcasm. Sorry that I can't because I am totally fed up with this situation.
    With love, on behalf of the 4 iPhones, 1 iMac, 1 Mac Book Air, 1 MacBook (old), 1 MBP 15" old, 1 MBP 13" Retina, 1 Apple TV, 1 AirPort Express, god knows how many ipods etc etc in my household.
    Yes, I'm an idiot Apple Fan...

    E. Rob wrote:
    Hey all,
    I've transitioned to the iCloud Photo Library. All my photos sync across all devices (iPhone, iMac, iCloud.com) - I have the new Beta Photo app running on my Mac as well.
    I've realized that with this setup if I delete a photo from one place, it disappears everywhere. Which I guess is convenient.
    However, I don't see a way to differentiate which photos I keep on which devices. All my libraries "have" to be identical.
    What do you men by 'all my libraries' You have 1 library, it's on iCloud, if you delete from there all devices connected to the account will see that you deleted it because it is no longer there.
    Don't use the iCloud library if you want different libraries on each device.

Maybe you are looking for