Qty update not active, function not possible error in MIGO
Dear all,
User faces , u201Cqty update not active, function not possibleu201D error in MIGO.
The receipt is for an STO and the material is split valuated. Qty and value updation is active and already similar receipt has been done for many qty.
Throw some light on this
Regards,
Antony
Hi Antony,
Was the material type for the material changed recently? Pls. check the same.
If the qty update is active for the receiving plant & material type, then there should not be any issue.
Regards
Prabhu S
Similar Messages
-
EHP4 installed but "DSD is not active - function not possible"
Dear Gurus,
In IDES ERP6 EHP4, it have "SAP Menu -> Logistics -> Logistics Execution -> Direct Store Delivery" menu.
But DEV ERP6 EHP4, it don't have above menu.
When I run t-code "/n/DSD/VC_VP", it error "DSD is not active - function not possible"
Note Message no. /DSD/VC_MESSAGE001
How to activate DSD on ERP6 EHP4?
Please advice.
Best regards,
Choosak B.Hi,
Thank you for your response.
Now, I can activate DSD with SPRO -> Activate Business Functions -> ENTERPRISE_BUSINESS_FUNCTIONS -> /DSD/BF
Best regards,
Choosak B. -
Sales area check in backend customizing not activated - MDSD not possible
HI,
While working test cases for upgrade to ECC 6.0 we encountered error message /DSD/ME 070 "Sales area check in backend processing not activated -> MDSD not possible" while trying to create a customer via an intranet application. I have searched forums, OSS messages, the DSD configuration guide, SAP help, and everything else I can find and have found nothing.
Can someone please point me to proper configuration setting?
Thanks
SteveHi Steve
Maybe is a problem in customizing. In SPRO --> Logistics Execution --> Direct Sttorage Delivery --> Basic Function --> Activate single Sales Area Processes.
Mark the flag and test.
Regards, Jenny -
hi,
one job is in ready state from long time and unable to stop/delete.
Error is like job is not active- cancellation not possible.
Kindly someone suggest me how to cancel the job on priority.
Thanks in advance!!
Regards,
Jeevan ReddyHello Bala,
This is not a PI question. You should have raised the question in different forum.
Anyways, You can delete a JOB.
Place cursor on the Job , goto JOB in the top right and delete the JOB.
Thanks,
Kalyan -
CS6 on W7-64 worked fine since April 2013. After a general system update its activation is not recognized anymore. The activation key is suddenly invalid. I uninstalled the sofware and tried to reinstall. Failed. How to get my activation key valid again?
Error "The serial number is not valid for this product" | Creative Suite
-
Hi SAP Experts,
The New contact person created in CRM 4.0 and added to BP under relationships , this contact is not replicated to ERP and giving an error as "Person no. not found - function module CONTACT_PARTNER_GET_ADDR3_KEY error
" in the BDOC.
Can anyone through some light on this .
Thanks in advance.
With Best Regards
Suchhihello, you mentioned that the contact has a relationship with a person right?
Is the person also exist in ERP?
As the middleware return the error CONTACT_PARTNER_GET_ADDR3_KEY , you can try to debug the BDOC to find out the reason.
You can set the breakpoint in the function , trigger the BP update, wait for system call it. But debug BDOC need some skill.
For the details of how to debug BDOC, you can find the related SAP Notes in SAP OSS. -
SmartForm language EN is not active and has no errors
Hi All,
I am getting an error "Form 'My Form Name' language EN is not active and has no errors ". This a smart form that's currently working fine with an existing company code but when assign this form (form was not changed at all) to another company code and run the dunning statement, it give us the above error. The funny thing is that it is active but still gives us the error.
Does anyone have any idea why this is and what to do to resolve this.
Regards.Hi,
Go into ur form in SMARTFORMS t-code............
In form attributes u have 3 radio buttons right
select translate into all languages option and activate it...........
Don't check the 2 check boxes right to dat.....
Cheers,
jose. -
Form Z_FIDUN_A language EN is not active and has no errors
Hi Everyone,
I have copied one Smartform from 4.6C to ECC 6.0. and i have activated that Smartform in ECC 6.0. when i tried to print it is giving me the error "Form Z_FIDUN_A language EN is not active and has no errors". I have activated it in EN only.
Please help me.Hi Leela,
Try running the FM generated for the SmartForm and resolve any errors that might occur.
Or Else
the issue must be the customising where the Business Events are trying to call SAP Scripts and not Smartforms.
Let me know If you require more help on this.
Edited by: Raj on Oct 29, 2010 1:37 PM -
Form Program Name language EN is not active and has no errors
Dear all,
I'm new to SAP development. I have copied the standard RLVSDR40 and made some modification on it. When i tried to print in lt31. I encounter the following error:
"Form <program name> language EN is not active and has no errors".
Any idea about this?? What is the standard procedure of this kind development??
Regards,
Kithi
first go to SE71 and give Form Name and Original Language of the form and copy it to zform.
Now open this Zform in change mode and go to Utilities-> change original language to log on language here EN in your case-> and save it.
Now your Zform is in language EN note tat now when you are opening your zform to modufy you might be trying to change it in DE so change language to EN and then modify it.
After making changes go to NACE transaction to assign this zform to transaction you are using.
Nace->choose application->output type->choose your output type->Double click processing routines->you will find one column pdf smartform/scriptname-> here give your zform name
It will surely work if not get back to me -
Form ZF_J_1IEWT_CERT language EN is not active and has no errors
Hi,
i got the following Error while Posting of With Holding Tax Certificates for a vendor through T-Code J1INCERT.
Form ZF_J_1IEWT_CERT language EN is not active and has no errors
Please help.....
Thanks
RashmiHi Rashmi,
In EWT there is a standard form for withholding tax certificate is J_1IEWT_CERT and your organization has created a new from name ZF_J_1IEWT_CERT . Just ask your ABAPer if this form has been activated and maintained properly.
Contact your ABAPer will solve the issue.
Regards,
Chintan Joshi. -
Form zform4 language EN is not active and has no errors
after executing a program calling script , it gives the following error after clicking print preview : Form zform4 language EN is not active and has no errors .
pl find solution.Moderator message - Welcome to SCN.
Have you tried activating the form (in SE71)?
Rob -
Account not active or not pending
Hi all
I need to have scenerios and undestanding on the accont not active or not pending and what does it relates in ISU
and what are the tcodes and flow where i need to dig in furthe to have clear picture of same and its implication..
and are we not covering it as part of standard sap functionlaity
regards
Prieti
Moderator note - thread locked, no research
See Help to determine Active and Final Billed ContractsHi,
go to trc rsd1, enter the InfoObject 0BUS_AREA.
In the Menu "EXTRAS" select Write transport request.
When propted enter a package and the relevant transportation request (or create one).
Afterwards release the new transport request and import it into the target system. Then try to import the initial request (the one that caused the error) again.
hth
cheers
Sven -
Profile does not activated (it shows an error backup is not possible)
Dear Experts ,
please solve my problem
here i changed one parameter by RZ10 in DEFAULT profile and i saved it then it prompts for Activate or not i said yes but the profile is not activated and it shows an error that is backup is not possible
parameter (login/system_client =100)
i did not get why it showing that error
please clarefy me
RegardsHi,
Make sure that there is proper access for this file at the OS level. Normally, when you are changing any profile at SAP level it will try to create a backup of existing file at OS level. Also, check if the parameter is set correctly and saved properly.
If you are not able to change the file at SAP from RZ10 then change the same at OS level and after that restart the instance for parameter to take effect. After the system is restarted then again the load the profiles back in to the system using RZ10-->Utilities->Import profile->of active servers
Regards,
Sharath -
I was working with two windows and 8-10 tabs in each window when my Firefox became unresponsive, and I received a string of JavaScript error prompts when I attempted any activity in the browser (such as scrolling). After about an hour of being unable to interact with Firefox at all, I Force Quit (on a Mac) the application.
When I opened Firefox again, it was taking a very long time to boot, and the process was locking up my computer, but eventually, I did receive a Restore Previous Session option. I tried restoring, but one tab in each window would stick and fail to load, causing the browser to freeze up yet again (one of the tabs was a Google search result page, which is completely benign). I had to Force Quit *again* and then a couple more times as I kept encountering the same issue.
Finally, I decided to restart my computer. I ran into the same problem. Then, I restarted again. Once more, the same problem. I actually tried restoring my session maybe 20 times before I ended up with the error: https://support.mozilla.org/en-US/kb/fix-bookmarks-and-history-will-not-be-functional?esab=a&as=aaq
I've followed step 1, which didn't work. I haven't proceeded to step 2, because I know I will definitely lose my previous session along with all recent history. I *need* to bookmark at least two of the tabs as they are of critical importance--one of which is a special URL that I cannot recover by any means.
Before I continue to step 2, is there any way that I can grab the URLs that were in my previous session and stash them somewhere to manually restore after fixing the error?
By the way, the crashing started when I tried to visit mail.google.com--typing that address in a new tab started the JavaScript errors when things had been running smoothly. I actually closed out several tabs when attempting to reopen my session, just trying to get things up and running again (and Save All Tabs) before I ran into the database error. I never got the opportunity to save my tabs.
I'm running Mac OS X Lion. Help?Follow-up: I'm worried about performing any actions without input, because I don't want to back myself into a corner.
Will resetting Firefox fix the problem (instead of creating a new places database)? https://support.mozilla.org/en-US/kb/reset-firefox-easily-fix-most-problems
According to this article, a reset will keep browsing history, which should allow me to access my lost tabs IF it will also fix my database problem. -
Error : Entry 4 not in table EMSEG (system error) in MIGO
Hi All,
I am getting the below error while cancelling the material document in MIGO.
Error : Entry 4 not in table EMSEG (system error)
Please provide any information on the same issue.
Thanks & Regards,
Ashish Dholiyou can only know it after you have read, justified and implemented the notes.
That is your work, it cannot be made by anyone here.
In general, if OSS notes are supposed to fix program errors, then it will usually not harm to implement them, you will get it anyway with the next hotpackage.
if your issue is caused by a program error, then there is no workaround to applying a OSS note to get your issue fixed.
Maybe you are looking for
-
A página está em inglês e gostaria de alterar para o português
-
after the last Yosemite update on my MacBook pro I turned the FileVault on, now my Mac is freezing all the time and encrypting the drive looks like going to last forever and I am unable to use my MacBook pro what must I do???!!!
-
SQL Developer: Failure -Test failed: IO Error: Got minus one from a read ca
SQL Developer: Failure -Test failed: IO Error: Got minus one from a read call Hi, I am sorry I know this is probably most frequently asked question, but I have no idea what I should be searching for. I looked up the error above to see if i could find
-
Floating status bar disappeared, how do I get it back
My floating status window no longer comes up when doing TM backups. How can I re-enable it?
-
Site wide update of navbar changes
I have a published website created in Dreamweaver mx2004. I want to add new entries to the left navigation bar, which is a multiple row, 1-column table. Is it possible to change it once and have it take effect for every instance of the navbar in the