Quad G5 with Dual 23's and GeForce 6600 problems

I bought this set up to take over as my main Photoshop station. I'm getting a few weird things though:
1. A ghost curser sits on the opposite monitor that I'm working on near the gutter of the two in the middle, very distracting.
2. when I'm working on two images in full screen mode in Photoshop and I attempt to move around in the images the screen does not refresh.
Now I wouldn't worry too much if I felt I was pushing an older system but since this is brand new and just how Apple configures it on the site, I'm a little disappointed.
Any ideas? Should I have to upgrade my 6600?

The problem seems to exist only only my "a" monitor (primary), when I try to reproduce the circumstances on the "b" monitor it works fine. So I tried the following:
1. Flipped the monitors a>b and b>a and the problem is still only on the "a" monitor.
2. Changed the resolution to 1600x1000, no change in the problem and also flipped the monitors with this resolution setting, no change.
3. Created new user and problem still exists with the new user.
Do I have a problem with my new "a" 23 Cinema Display or is this 6600 card not enough to push it? It was the card that is configured from Apple for this system.
I'm frustrated.

Similar Messages

HT1692 I use an iPhone 5, and want to sync my phone calendar and contacts with Outlook 7 calendar and contacts; twpo problems--I now get dozens of new calendars every time, and my calendar will not syncd at all.; meaning that date entries on Outlook do no

I use an iPhone 5, and want to sync my phone calendar and contacts with Outlook 7 calendar and contacts; two problems--I now get dozens of new calendars every time, and my outlook calendar will not sync at all.; meaning that date entries on Outlook do not come across ot iPhone.

It is unusual for the calendar to sync and not the contacts in Outlook. I've worked with Outlook for years. You didn't answer what computer OS you are using. If it is Windows, have you tried to reset the sync history in iTunes? Do that by opening iTunes, go to Edit>Preferences>Devices and click on reset sync history. If you have done this and it doesn't help, then we can try and run scanpst.exe on your Outlook file and see if there are any errors. Search your computer for that file, however it normally resides in one of the Microsoft Office folders in the folder Program files. After that, you can see if it will sync.

Photoshop CS4 and GeForce 6600 on PowerPC G5

I get frequent alert from Photoshop CS4 regarding display driver which say's to
check for driver update and that Open GL 2.0 is not available and that GPU is turned off.
But I can work in the photoshop but a few things are slow and look is not that great.
So can anyone help with this? I can't seem to find anything regarding a solution for this on apple or adobe or anywhere. anyone have some help or ideas. Do I need to upgrade to OS to 10.5 or is it a driver. which I can't seem to find. Also I have run apple software update a number of times and it says everything is updated and good to go.
NVIDIA GeForce 6600 Card, duo displays, 2.5Ghz - 10.4.11

OpenGL 2.0 is only available in 10.5.x. OS X 10.4.x had OpenGL 1.5.
http://developer.apple.com/graphicsimaging/opengl/capabilities/GLInfo_1058.html

I need help with this Time Capsule and External HD problem!

my time capsule is working perfectly and i decided to hook up a seagate 500 external hd thru the usb on the back of the time capsule!
well i can see both drives on my macbook and i can transfer files from my mac to both hd with a breeze
one major problem i cannot extract files from my external hd only put files in! i tried checking the setting and everything but with no avail! anyone have this problem and how did they fix it? thank you!
Message was edited by: aphextwin007

Try connecting another USB storage device to the TC - HDD or memory stick. Format the device while it's connected to the TC, then try writing and reading to it.
It does seem very odd that you can write to the HDD but not read from it. Presumably when you copy files to it they appear in Finder - you can see them OK? Do they appear to be the right size ("get info", or click in "columns" view). What exactly happens if you try to drag them back to the desktop?
I can only think that you may have a hardware or formatting problem, hence trying a different, freshly formatted, drive.

Typography with a thin stroke and a fat problem...

ok... <sigh>
My client chose this thick type that didnt look good and asked me to thin it out. I decided to do it by adding a 0.25 stroke inside all the fonts i didnt want bold (its like 70% of a 6 page document). When i was sending the pdf to the client i had to export it in pdfx1a because it was the only type of pdf that didnt show this weird shadow underneath. Well, document is on the printer and thats done, I hope it doesnt become a problem when printing. MY PROBLEM NOW is that i need to convert this document into a PDF that can be distributed through email. I have tried everything. I have converted to outlines and the file is huge. I have converted to jpg and that was just a plain mistake. I have used all the pdf formats and it still shows that weird shadow. Its like the type is embossed. PDFX1A is the only way it works well, but the file ends up huge in size. What is happening here? How can i fix this? please help!
thank you in advance...
Intermediate graphic designer with a rookie situation...

The problem is that the outline of each single character is output to the PDF as a *vector object*. So you now have a document with lots of vector data; and vector data cannot be compressed as easily as a bitmap (JPEG, for example, only works so well because it *throws away* large parts of the data).
In addition, you can see the difference between outlined and regular text *on screen* because these two types of object are drawn in a different way. Outlined strokes are drawn as normal vector art, one straight line at a time; "actual" text, on the other hand, is drawn with super-optimized routines, both for efficiency and speed, and to render as legible as possible. (But -- usually -- the difference disappears when you are outputting on a device with a sufficiently high resolution.)
Removing the outline strokes from the text will help immensely. Of course the text will look slightly different, but only when compared directly to the printed matter. On-screen display will be much better and your PDF size will be a lot smaller.

Using RSLinx OPC with Labview 2009 SP1 and Getting Wierd Problem

I have a small test system with 4 analog inputs and 4 analog outputs. Oddly, I can use the Labview Distributed Systems Manager and read the input (level) changes and stroke the analog outputs (valves). However, when I go into a VI, I can get the level readings (only the first time I enter, after that not), but can never stroke the valves. Looking at the shared variable setup in both the project I am using and the Distributed Systems Manager, I have them both set up the same as a PSP with the same OPC reference, although formerly the project used project-attached shared variables.

Using the timed structure set at the same acquisition rate as the OPC interface corrected the problem.

Problem with dual monitor 30" and 20"

waaa... i've switched plugs and all that.. my 30" is acting as a second monitor no matter what i do...
i want the 30" as my main display...
my dock and menus are on my 20"
is there a way to switch them? or do they not support dual monitor with a 30"
for your info..
video card is nvidia geforce 7300 gt
please help.. i don't want to give this bad boy to someone else at work.
thanks.
Pave

How?

Problem with 848p NEO V and GeForce FX 5600 point of View

Hello there,
I have bought a mobo yesterday (848p NEO V) then when I tried to plug the graphic card (Ge Force FX 5600 point of view) the computer reboots just before entering Win XP PRO.
So I tried another graphic card (ATI 9200), all worked fine.
In the same way, I tried my GeForce in another mobo (ECS P4VXAS) and of course all worked fine.
Each time I tried the MSI mobo with the GeForce card (using diffrents drivers), it doesn't work.
Does someone know where could this problem come from?
Thank you very much
PS: Sorry for my ugly english.

MOBO: MSI 848p NEO V
CPU: Intel P4 2.4 A
Ram: 512 M DDRSDRAM PC3200 (noname) two 256 modules
DD: 40Go (MAXTOR), 40Go (MAXTOR)
Display: Point Of View GeForce FX 5600 128mb
Sound: Sound Blaster Live! 5.1
Controler Card: Sillicon Image 0680A ULTRA ATA 133
DVDROM: LG
CDROM: Samsung
DVDRW: Liteon
OS: Win XP Pro SP2 FR (all critical updates installed)
all cddrive on motherboard IDE controler
hard drives on controler card
PSU: 350w noname
Tell me if you need anything else.
Thanks

Problems with combo KT3 ARU and GeForce 4?

Have been using GeForce 2MX with driver 30.82 w/out problems. When istalling ASUS ;( V8440, a GeForce 4 with Ti 4400 my screen goes bananas. Gets strange patterns even at BIOS startup. Hangs in WinXP. Starts in Safe-mode but still with strange patterns.
Heard rumors ?( that the problem might lie in the combo VIA and nVidia?
Have given up on the GeForce 4 unless someone can give me a hint of what might be wrong.
KT3 ARU w/2100XP/256 RAM (PC2700)/350W Pwrsupp.

Quote
What drivers are you using for the GeForce 4? Quote
Using nVidia 30.82, and yes, the mascine runs in safe mode (occationally), but with patterns. Usually grouped like this:
__ __ __ __ __ etc...
A guy at a local PC-store said something about it when I explained my problem. He had no solution and might be wrong.
Bernt

Problem with dual monitors - unresponsiveness and shut down

Hello there!
I've been happily using a 2010 Mac Pro since March with a Radeon 5870 card and two Apple displays connected to the card with mini-displayport cables.
Recently, after I installed Lion, the secondary screen has been acting strangely; sometimes, while I can move my cursor without any problem on it, I can't click on anything. I click and the program, such as Apple Mail or Reason, just doesn't respond in any way. Moving the program window to the main screen solves the problem.
Moreover the secondary monitor sometimes shuts down for a second, displacing in the meantime all my windows to the main one. It always comes back instantly.
Finally, when I use Windows 7 the secondary screen isn't even recognized anymore; it stays black and windows doesn't see it.
I tried of course to unplug and reconnect both monitors a few times but the problem, which in Lion is sporadic, remains.
Any ideas?

There ARE problems hooking up multiple DVI displays. But Mini DisplayPort displays are supposed to "just work" according to this article:
Mac Pro (Early 2009), Mac Pro (Mid 2010): Supported display configurations
The other issue some users have is not completely seating those Mini DisplayPort cables or adapters. The connector must be inserted into the jack until essentially ALL of the metal part disappears.

Problem with Dual Core Center and MSI 3870

Hello again, my previous thread is this:
https://forum-en.msi.com/index.php?topic=113164.0
The VGA works well, the problem is that AFTER i installed it the Dual Core Center stoped to work!!
Installed the dotnetfix again but no avail, still doesn't work.
And i know that happened after installed the VGA, so i believe that must be part of the problem.
Thanks!

Try the latest version of Dual Core Center.
You will find many alternatives for DCC here: https://forum-en.msi.com/index.php?topic=107133.0

Need help with Premier Elements 11 and Geforce 9600 GT Driver

I have Win7. Everything was working until my driver got updated by MicrosoftUpdates. I rolled back the driver but still get the error/warning that the driver is not optimal. Cannot see a preview of my video once it's uploaded. I loaded an older driver from the Nvidia site (9.18.13.2723 dated Sept 12, 2013) but still no luck. Any suggestions?

Just FYI - I do NOT let Windows Update install graphics drivers... I make that choice myself... in fact, I have Windows Update set to notify only, NOT automatic update, so I may look and choose all updates
Hide Windows 7 Updates that you do not Ever Want to Install
Remove from Windows Update http://technet.microsoft.com/en-us/magazine/ff382716.aspx
In the list of updates, right-click any update that you don’t want to see again, and choose Hide Update. If you later change your mind—or if you just want to see a list of the updates you’ve chosen to hide—on the main Windows Update page, click Restore Hidden Updates.

Overheating problem with Pavilion dv7-1464nr and some other problems

My laptop has always been very hot on bottom left upper side and blows hot air out the back, it has blistered my leg twice. I even use a dual cooling fan pad. I have had the power supply replaced through warranty once and the second one has already burned up too. I purchased one at Wal-Mart that cost me over $100, was on vacation and I need laptop for Garmin GPS, I even purchased a 1000 watt converter hardwired to a diesel truck for better performance, power supply is still hot but working. Laptop is now overheating to the point of shutting down and the fan has always run at highest speed which is very loud and annoying. I only have 20 days left on warranty, suggestions.
I also have trouble with the top touch control bar on keyboard not working, sometimes it does sometimes not and the left key on mouse has never worked right, usually have to click it two or three time for it to work. Also have one USB port that broke, when I unplugged a USB cord the part that it insert into came out with it in the cord. I have had to tape my battery so it will stay in, I think the Iocking switch has a broken piece, had it 3 months when this happened but decided to wait to see if anything else went wrong!!
Does HP have a replacement for lemon laptop??? Please help

Teegarden10
OMG......this could have been my post right down to the burned body part (my belly). I also bought the cooling pad and new power supply. My laptop also shuts down all the time. My solution to the left click problem was to run every virus removal I could and that helped with the key problem. If you hear of any solutions please let me know [Personal Information Removed]

Help needed with Java 1.4 and xml Runtime problem

I am working on a java 1.3 and JAXP1.1 written code. Now I want to compile and run it using J2SE 1.4. Here are the import statements from the existing code.
import org.xml.sax.*;
import org.xml.sax.helpers.DefaultHandler;
import org.xml.sax.Locator;
import javax.xml.parsers.SAXParser;
import javax.xml.parsers.SAXParserFactory;
import org.xml.sax.Attributes;
import org.xml.sax.XMLReader;
import org.xml.sax.InputSource;
import java.sql.*;
import java.net.*;
import java.io.*;
When I run the existing(using java 1.3 and Jaxp1.1) code I have to include the files crimson.jar and jaxp.jar in the windows 2000 CLASSPATH and works fine.
But when I compile and run it using J2SE 1.4 which has the built in support for the saxp, I thought that I don't have to specify any CLASSPATH for the new 1.4 so I don't specify any Classpath and it gives me the Microsoft "ClassFactory cannot find the requested class" error which means that even thought the new java 1.4 has the xml classes as libraries yet it still requies some .jar files to be listed in the CLASSPATH.
If I am right then what path will work(i.e what jar class I need to add to the CLASSPATH).
Thanks for your help.
RA.

Thanks for your reply,
I think I didn't specify when the error occurs. The ClassFactory related error occurs when I run the program, it compiles without any error.
From what I understood somewhere in the java 1.4 docs, that the new 1.4 has the xml libraries built in by default so one doesn't need to give the classpaths just like we don't give any CLASSPATH for using swing and many of the other java packages. That is one thing.
Second thing is that I also tried to use the java_xml_pack-spring02 and java_xml_pack-summer02; but non of them include the crimson.jar and the jaxp.jar files in them which are the 2 .jar files that makes the program run fine when used under the java 1.3 with combination of the jaxp1.1(which was downloaded seperately and then the CLASSPATH for it was set.).
Can you please help what .jar files do I need to use instead. I tried to use the ones that the new java_xml_pack-spring02 and java_xml_pack-summer02 has for the jaxp in them.
Thanks again.
RA

I've had Itunes since 2009. Purchased a new computer and attempted to install Itunes with running Windows 8 and encountered a problem. Itunes stopped with error 2324. Having problems trying to reinstall Itunes. Help please.

I've been and ITunes customer since 2009. I have a ipod classic with close to 9,000 songs. I recently purchased a new laptop and attempted to download the latest ITunes version 12.0 to my laptop. I'm running with Windows 8. During the download, ITunes stops and gives error code 2324. Can't reinstall ITunes. ITunes doesn't work. Please help.

Hi chenalej924,
We've an article (linked below) that details a number of steps which can help get iTunes successfully installed on your computer.
Issues installing iTunes for Windows
http://support.apple.com/en-us/HT201668
Regards,
Allen

Quad G5 with Dual 23's and GeForce 6600 problems

Similar Messages

Maybe you are looking for