Quadro FX 5800 in D20/S20?

can the D20 or S20 run the Quadro FX 5800?
(mod edit: changed title to match new thread)
Regards,
Jin Li
May this year, be the year of 'DO'!
I am a volunteer, and not a paid staff of Lenovo or Microsoft
Solved!
Go to Solution.

like i said above, the D10 should support the 5800 because the 4800 works in mine and they're based off the same generation of architecture and BIOSes.   the S10 is an unknown but i'd be surprised if it didn't work.
in fact, here's some evidence: /t5/ThinkStation/Nvidia-quadro-FX-5800-4GB-compatible-with-D10-Workstation/m-p/116418
ThinkStation C20
ThinkPad X1C · X220 · X60T · s30 · 600

Similar Messages

  • Benefit of using Quadro FX 5800 vs. GTX 580 in CS6... Is there any?

    I've been looking around and could not find a good justification to use a Quadro FX 5800 vs. GTX 580. Is there something that I am missing about the Quadro?

    I have a question for you on the GTX 680, why do you and others say that the GTX680 is hamstrung by the 256-bit bus when the memory bandwidth of the GTX580 is 192.4 GB/s and the memory bandwidth of the GTX 680 is essentially the same at 192.2 GB/s.  The specifications show that despite a narrower interface that have much faster memory for the 600 series (Data rate of 6 GHz versus 4 GHz) Incidently there is a serious memory clock rate mistake on the nVidia page on the GTX 680 specs.   For backup I had to go to EVGA's specifications
    anat_usa, go with the GTX 6xx family there is now a new GTX 670 with either 2 GB of VRAM or 4 GB of VRAM.  You will be much happier in the long run.

  • Speed Comparison between Quadro FX 5800, 4800, 3800

    Question: Speed Comparison between Quadro FX 5800, 4800, 3800
    Both Adobe and Nvidia technical support said they do not have speed comparison benchmarks on the same Windows 7, 64 bit computer for both rendering and encoding between the Quadro FX 5800, 4800, and 3800. Does anyone know of such speed comparisons. Thanks in advance.

    I just had a new computer built using a 6 core AMD processor and 16 gb Ram, cs5, etc.  Is it possible for me to apply your benchmark and how would I do it?
    Thanks,
    John Rich

  • NVIDIA Quadro FX 5800

    I have a question, Can i use with my Mac Pro NVIDIA® Quadro® FX 5800 Graphic card?
    this card work with Mac Pro ?
    Ty

    You have to buy the card from Apple or it will only work in Windows Boot Camp Mode.

  • NVIDIA Quadro FX 5800 in a 1st Gen Mac Pro?

    Hello, is it possible to use the new NVIDIA Quadro FX 5800 in a 1st Generation Mac Pro?

    Not if it doesn't have EFI32 ROM code (firmware) on it. Any card to run in OS X needs special EFI firmware, and different for 2008 and before.
    Of course, if you want to use it in Windows, should be able to.

  • Nvidia Quadro fx 5800 w premier pro

    Hi,
    I am looking at getting the Nvidia quadro fx 5800 to be used with Premier Pro. I saw a while back that Premier Pro has a button to use that graphics card.  It made it really fast to edit HD and 3D footage.  Does it still have that button in the latest version?
    Thanks,
    Mike

    Old dual Xeons are not the very fastest now, but going for a complete new system is pretty costly.
    If you think about dual Xeons, think about Xeon E5-2687W or E5-4650, but that will cost quite a lot. You have to calculate on spending more than $ 15K for such a system. However, these are octo cores. The alternative is a single i7-39xx and overclocking. For some ideas of configurations, look at PPBM5 Benchmark or PPBM6 Benchmark Results Table. Notice you have to be registered and logged in to access this last page. This may contain some information that is interesting too: Intro Part 1

  • Nvidia quadro FX 5800 4GB compatible with D10 Workstation?

    Hello ,  I bougth a video card Nvidia quadro FX 5800 4GB, the question is If i get a cable 6 pin to 8 pin would the card work or would my workstation explote or something??? 
     Thank you.
    Solved!
    Go to Solution.

    Thank you guys , I installed the card and it works perfectly... 
    I must say that is incredible the amount of polys that this card moves... I move more than 1200000 like if it was only a few hundred polygons.

  • Nvidia quadro 4000 or 5000 in Mac Pro

    Hello all,
    I have this question that I already make to a sale advisor in a Mac store and he do not know what to answer and also I do it to a technical Mac sales agent and again nothing.
    I do not own a Mac pro yet, I am looking to buy one becuase is the only system that can hold (in a stable way) both Mac OS X and Windows 7.
    I am a professional working with 3D content creation, CAD design and digital video and I want to be able to do pro 3D content with Windows 7 and also working in pro videos in Mac OSX. The actual graphic cards for the Mac pro 2010 are intended for video games instead of professional production (this is the info posted in the AMD/ATI website when one do the search for Radeon 5770 and 5780, of course they can handle some 3d content but not as the latest generation of Nvidia cards)
    My question is:
    Can I use a Mac pro with one of those ATI cards installed in the 1st PCIe 2.0 16x port for the MAC OS X and then install a Nvidia Quadro 4000 or 5000 in the second PCIe 2.0 16x port for Windows 7? (given the fact that Nvidia do not have even beta drivers for Mac OS X for those types of cards yet)
    Im thinking that I can use the Mac with the ATI and then when swiching to Windows (trough Boot Camp) using the Nvidia Quadro but I am not sure if this is possible and if installing another card will created probs. and if is posible how to relate each card to each OS.
    I ask this before having the Mac becuase I am planing to make a huge inversion on it and I want to be sure about this. (The specs. will be 32gb ram, 512gb ssd, 3x2tb hdd, 2x2.93ghz6c xeons)
    Thank you all and I will be pleased to heard any comments or suggestions.

    The Quadro FX 5800 is launching at $3,499, and its spec sheet looks well furnished: 240 stream processors, fill rate of 52 billion texels per second, 128-bit precision, true 10-bit color support, 102GB/s memory bandwidth (which should translate to an 800MHz GDDR3 clock speed, if my math is right), and "interactive 4D modeling with time lapse capabilities." Nvidia says the Quadro FX 5800 should be well suited to applications like "oil and gas exploration, medical imaging, styling and design, and scientific visualization."
    http://techreport.com/discussions.x/15866
    First announced fall-winter 2008
    http://www.nvidia.com/object/productquadro_fx_5800us.html
    If you wanted to use nVidia's Quadro CX to speed up CS5, it is Windows only, and the Mac only has TWO 6-pin connectors. So even though Quadro 5800 power is under 200W there are no more aux power connectors. Though you can try to add a small 450W PSU for graphics 2 x 8-pin./2 x 6-pin) it gets messy running from the 2nd optical drive bay and tight fit-impossible for cables. Not designed for dual graphic card power.
    The GTX 285 EVGA came out for Mac last year but drivers have been a problem with performance and a year later 10.6.4 and nVidia rushed to post a patch but there has been no word now that the GTX 285 went EOL. What's up with that?

  • Xorg segfault [solved]

    Some wine applications crash my xorg.. Here is the log:
    [ 474.208]
    X.Org X Server 1.14.1
    Release Date: 2013-04-17
    [ 474.209] X Protocol Version 11, Revision 0
    [ 474.209] Build Operating System: Linux 3.8.7-1-ARCH x86_64
    [ 474.209] Current Operating System: Linux pendulum 3.9.7-1-ARCH #1 SMP PREEMPT Thu Jun 20 22:45:32 CEST 2013 x86_64
    [ 474.209] Kernel command line: root=/dev/disk/by-id/ata-WDC_WD5000AADS-00S9B0_WD-WCAV91496126-part2 zfs=maindisk/root quiet ro initrd=../initramfs-linux.img BOOT_IMAGE=../vmlinuz-linux
    [ 474.209] Build Date: 17 April 2013 02:37:06PM
    [ 474.209]
    [ 474.209] Current version of pixman: 0.30.0
    [ 474.209] Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    [ 474.209] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 474.210] (==) Log file: "/var/log/Xorg.2.log", Time: Sun Jun 23 15:24:17 2013
    [ 474.210] (==) Using config directory: "/etc/X11/xorg.conf.d"
    [ 474.211] (==) No Layout section. Using the first Screen section.
    [ 474.211] (==) No screen section available. Using defaults.
    [ 474.211] (**) |-->Screen "Default Screen Section" (0)
    [ 474.211] (**) | |-->Monitor "<default monitor>"
    [ 474.211] (==) No monitor specified for screen "Default Screen Section".
    Using a default monitor configuration.
    [ 474.211] (==) Automatically adding devices
    [ 474.211] (==) Automatically enabling devices
    [ 474.211] (==) Automatically adding GPU devices
    [ 474.211] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
    [ 474.211] Entry deleted from font path.
    [ 474.211] (==) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/,
    /usr/share/fonts/Type1/,
    /usr/share/fonts/100dpi/,
    /usr/share/fonts/75dpi/
    [ 474.211] (==) ModulePath set to "/usr/lib/xorg/modules"
    [ 474.211] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
    [ 474.211] (II) Loader magic: 0x7fcc20
    [ 474.211] (II) Module ABI versions:
    [ 474.212] X.Org ANSI C Emulation: 0.4
    [ 474.212] X.Org Video Driver: 14.1
    [ 474.212] X.Org XInput driver : 19.1
    [ 474.212] X.Org Server Extension : 7.0
    [ 474.212] (II) config/udev: Adding drm device (/dev/dri/card0)
    [ 474.212] setversion 1.4 failed
    [ 474.213] (--) PCI:*(0:1:0:0) 10de:0615:19da:7103 rev 162, Mem @ 0xe6000000/16777216, 0xd0000000/268435456, 0xe4000000/33554432, I/O @ 0x0000b000/128, BIOS @ 0x????????/131072
    [ 474.213] Initializing built-in extension Generic Event Extension
    [ 474.214] Initializing built-in extension SHAPE
    [ 474.214] Initializing built-in extension MIT-SHM
    [ 474.214] Initializing built-in extension XInputExtension
    [ 474.214] Initializing built-in extension XTEST
    [ 474.214] Initializing built-in extension BIG-REQUESTS
    [ 474.214] Initializing built-in extension SYNC
    [ 474.214] Initializing built-in extension XKEYBOARD
    [ 474.214] Initializing built-in extension XC-MISC
    [ 474.214] Initializing built-in extension SECURITY
    [ 474.214] Initializing built-in extension XINERAMA
    [ 474.214] Initializing built-in extension XFIXES
    [ 474.214] Initializing built-in extension RENDER
    [ 474.214] Initializing built-in extension RANDR
    [ 474.214] Initializing built-in extension COMPOSITE
    [ 474.214] Initializing built-in extension DAMAGE
    [ 474.214] Initializing built-in extension MIT-SCREEN-SAVER
    [ 474.214] Initializing built-in extension DOUBLE-BUFFER
    [ 474.215] Initializing built-in extension RECORD
    [ 474.215] Initializing built-in extension DPMS
    [ 474.215] Initializing built-in extension X-Resource
    [ 474.215] Initializing built-in extension XVideo
    [ 474.215] Initializing built-in extension XVideo-MotionCompensation
    [ 474.215] Initializing built-in extension XFree86-VidModeExtension
    [ 474.215] Initializing built-in extension XFree86-DGA
    [ 474.215] Initializing built-in extension XFree86-DRI
    [ 474.215] Initializing built-in extension DRI2
    [ 474.215] (II) LoadModule: "glx"
    [ 474.215] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    [ 474.252] (II) Module glx: vendor="NVIDIA Corporation"
    [ 474.252] compiled for 4.0.2, module version = 1.0.0
    [ 474.252] Module class: X.Org Server Extension
    [ 474.252] (II) NVIDIA GLX Module 319.23 Thu May 16 19:23:10 PDT 2013
    [ 474.252] Loading extension GLX
    [ 474.252] (==) Matched nouveau as autoconfigured driver 0
    [ 474.252] (==) Matched nvidia as autoconfigured driver 1
    [ 474.253] (==) Matched nv as autoconfigured driver 2
    [ 474.253] (==) Matched vesa as autoconfigured driver 3
    [ 474.253] (==) Matched modesetting as autoconfigured driver 4
    [ 474.253] (==) Matched fbdev as autoconfigured driver 5
    [ 474.253] (==) Assigned the driver to the xf86ConfigLayout
    [ 474.253] (II) LoadModule: "nouveau"
    [ 474.254] (WW) Warning, couldn't open module nouveau
    [ 474.254] (II) UnloadModule: "nouveau"
    [ 474.254] (II) Unloading nouveau
    [ 474.254] (EE) Failed to load module "nouveau" (module does not exist, 0)
    [ 474.254] (II) LoadModule: "nvidia"
    [ 474.254] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
    [ 474.255] (II) Module nvidia: vendor="NVIDIA Corporation"
    [ 474.255] compiled for 4.0.2, module version = 1.0.0
    [ 474.255] Module class: X.Org Video Driver
    [ 474.255] (II) LoadModule: "nv"
    [ 474.255] (II) Loading /usr/lib/xorg/modules/drivers/nv_drv.so
    [ 474.255] (II) Module nv: vendor="X.Org Foundation"
    [ 474.255] compiled for 1.14.0, module version = 2.1.20
    [ 474.256] Module class: X.Org Video Driver
    [ 474.256] ABI class: X.Org Video Driver, version 14.1
    [ 474.256] (II) LoadModule: "vesa"
    [ 474.256] (II) Loading /usr/lib/xorg/modules/drivers/vesa_drv.so
    [ 474.256] (II) Module vesa: vendor="X.Org Foundation"
    [ 474.256] compiled for 1.14.0, module version = 2.3.2
    [ 474.256] Module class: X.Org Video Driver
    [ 474.256] ABI class: X.Org Video Driver, version 14.1
    [ 474.256] (II) LoadModule: "modesetting"
    [ 474.257] (II) Loading /usr/lib/xorg/modules/drivers/modesetting_drv.so
    [ 474.257] (II) Module modesetting: vendor="X.Org Foundation"
    [ 474.257] compiled for 1.14.1, module version = 0.8.0
    [ 474.257] Module class: X.Org Video Driver
    [ 474.257] ABI class: X.Org Video Driver, version 14.1
    [ 474.257] (II) LoadModule: "fbdev"
    [ 474.257] (II) Loading /usr/lib/xorg/modules/drivers/fbdev_drv.so
    [ 474.257] (II) Module fbdev: vendor="X.Org Foundation"
    [ 474.258] compiled for 1.14.0, module version = 0.4.3
    [ 474.258] Module class: X.Org Video Driver
    [ 474.258] ABI class: X.Org Video Driver, version 14.1
    [ 474.258] (II) NVIDIA dlloader X Driver 319.23 Thu May 16 19:02:20 PDT 2013
    [ 474.258] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
    [ 474.258] (II) NV: driver for NVIDIA chipsets: RIVA 128, RIVA TNT, RIVA TNT2,
    Unknown TNT2, Vanta, RIVA TNT2 Ultra, RIVA TNT2 Model 64,
    Aladdin TNT2, GeForce 256, GeForce DDR, Quadro, GeForce2 MX/MX 400,
    GeForce2 MX 100/200, GeForce2 Go, Quadro2 MXR/EX/Go,
    GeForce2 Integrated GPU, GeForce2 GTS, GeForce2 Ti, GeForce2 Ultra,
    Quadro2 Pro, GeForce4 MX 460, GeForce4 MX 440, GeForce4 MX 420,
    GeForce4 MX 440-SE, GeForce4 440 Go, GeForce4 420 Go,
    GeForce4 420 Go 32M, GeForce4 460 Go, Quadro4 550 XGL,
    GeForce4 440 Go 64M, Quadro NVS, Quadro4 500 GoGL,
    GeForce4 410 Go 16M, GeForce4 MX 440 with AGP8X,
    GeForce4 MX 440SE with AGP8X, GeForce4 MX 420 with AGP8X,
    GeForce4 MX 4000, GeForce4 448 Go, GeForce4 488 Go, Quadro4 580 XGL,
    Quadro4 NVS 280 SD, Quadro4 380 XGL, Quadro NVS 50 PCI,
    GeForce4 448 Go, GeForce4 MX Integrated GPU, GeForce3,
    GeForce3 Ti 200, GeForce3 Ti 500, Quadro DCC, GeForce4 Ti 4600,
    GeForce4 Ti 4400, GeForce4 Ti 4200, Quadro4 900 XGL, Quadro4 750 XGL,
    Quadro4 700 XGL, GeForce4 Ti 4800, GeForce4 Ti 4200 with AGP8X,
    GeForce4 Ti 4800 SE, GeForce4 4200 Go, Quadro4 700 GoGL,
    Quadro4 980 XGL, Quadro4 780 XGL, GeForce FX 5800 Ultra,
    GeForce FX 5800, Quadro FX 2000, Quadro FX 1000,
    GeForce FX 5600 Ultra, GeForce FX 5600, GeForce FX 5600XT,
    GeForce FX Go5600, GeForce FX Go5650, Quadro FX Go700,
    GeForce FX 5200, GeForce FX 5200 Ultra, GeForce FX 5200,
    GeForce FX 5200LE, GeForce FX Go5200, GeForce FX Go5250,
    GeForce FX 5500, GeForce FX 5100, GeForce FX Go5200 32M/64M,
    Quadro NVS 55/280 PCI, Quadro FX 500/600 PCI,
    GeForce FX Go53xx Series, GeForce FX Go5100, GeForce FX 5900 Ultra,
    GeForce FX 5900, GeForce FX 5900XT, GeForce FX 5950 Ultra,
    GeForce FX 5900ZT, Quadro FX 3000, Quadro FX 700,
    GeForce FX 5700 Ultra, GeForce FX 5700, GeForce FX 5700LE,
    GeForce FX 5700VE, GeForce FX Go5700, GeForce FX Go5700,
    Quadro FX Go1000, Quadro FX 1100, GeForce 6800 Ultra, GeForce 6800,
    GeForce 6800 LE, GeForce 6800 XE, GeForce 6800 XT, GeForce 6800 GT,
    GeForce 6800 GT, GeForce 6800 GS, GeForce 6800 XT, Quadro FX 4000,
    GeForce 6800 GS, GeForce 6800, GeForce 6800 LE, GeForce 6800 XT,
    GeForce Go 6800, GeForce Go 6800 Ultra, Quadro FX Go1400,
    Quadro FX 3450/4000 SDI, Quadro FX 1400, GeForce 6600 GT,
    GeForce 6600, GeForce 6600 LE, GeForce 6600 VE, GeForce Go 6600,
    GeForce 6610 XL, GeForce Go 6600 TE/6200 TE, GeForce 6700 XL,
    GeForce Go 6600, GeForce Go 6600 GT, Quadro NVS 440, Quadro FX 550,
    Quadro FX 550, Quadro FX 540, GeForce 6200, GeForce 6500,
    GeForce 6200 TurboCache(TM), GeForce 6200SE TurboCache(TM),
    GeForce 6200 LE, GeForce Go 6200, Quadro NVS 285, GeForce Go 6400,
    GeForce Go 6200, GeForce Go 6400, GeForce 6250, GeForce 7100 GS,
    GeForce 6800, GeForce 6800 LE, GeForce 6800 GT, GeForce 6800 XT,
    GeForce 6200, GeForce 6200 A-LE, GeForce 7800 GTX, GeForce 7800 GTX,
    GeForce 7800 GT, GeForce 7800 GS, GeForce 7800 SLI, GeForce Go 7800,
    GeForce Go 7800 GTX, Quadro FX 4500, GeForce 7350 LE,
    GeForce 7300 LE, GeForce 7300 SE, GeForce Go 7200, GeForce Go 7300,
    GeForce Go 7400, GeForce Go 7400 GS, Quadro NVS 110M,
    Quadro NVS 120M, Quadro FX 350M, GeForce 7500 LE, Quadro FX 350,
    GeForce 7300 GS, GeForce 7650 GS, GeForce 7600 GT, GeForce 7600 GS,
    GeForce 7300 GT, GeForce 7600 LE, GeForce 7300 GT, GeForce Go 7700,
    GeForce Go 7600, GeForce Go 7600 GT, Quadro NVS 300M,
    GeForce Go 7900 SE, Quadro FX 550M, Quadro FX 560, GeForce 7900 GTX,
    GeForce 7900 GT, GeForce 7900 GS, GeForce 7950 GX2, GeForce 7950 GX2,
    GeForce 7950 GT, GeForce Go 7950 GTX, GeForce Go 7900 GS,
    GeForce Go 7900 GTX, Quadro FX 2500M, Quadro FX 1500M,
    Quadro FX 5500, Quadro FX 3500, Quadro FX 1500, Quadro FX 4500 X2,
    GeForce 6150, GeForce 6150 LE, GeForce 6100, GeForce Go 6150,
    Quadro NVS 210S / NVIDIA GeForce 6150LE, GeForce Go 6100,
    GeForce 6150SE, GeForce 6100 nForce 405, GeForce 6100 nForce 400,
    GeForce 6100 nForce 420, GeForce 7150M / nForce 630M,
    GeForce 7000M / nForce 610M, GeForce 7050 PV / nForce 630a,
    GeForce 7050 PV / nForce 630a, GeForce 7025 / nForce 630a,
    GeForce 8800 GTX, GeForce 8800 GTS, GeForce 8800 Ultra,
    Quadro FX 5600, Quadro FX 4600, GeForce 8600 GTS, GeForce 8600 GT,
    GeForce 8600 GT, GeForce 8600 GS, GeForce 8400 GS, GeForce 9500M GS,
    GeForce 8300 GS, GeForce 8600M GT, GeForce 9650M GS,
    GeForce 8700M GT, Quadro FX 370, Quadro NVS 320M, Quadro FX 570M,
    Quadro FX 1600M, Quadro FX 570, Quadro FX 1700, GeForce GT 330,
    GeForce 8400 SE, GeForce 8500 GT, GeForce 8400 GS, GeForce 8300 GS,
    GeForce 8400 GS, GeForce 8600M GS, GeForce 8400M GT,
    GeForce 8400M GS, GeForce 8400M G, Quadro NVS 140M, Quadro NVS 130M,
    Quadro NVS 135M, GeForce 9400 GT, Quadro FX 360M, GeForce 9300M G,
    Quadro NVS 290, GeForce GTX 295, GeForce GTX 280, GeForce GTX 260,
    GeForce GTX 285, GeForce GTX 275, GeForce GTX 260, GeForce GTX 295,
    Quadroplex 2200 D2, Quadroplex 2200 S4, Quadro CX, Quadro FX 5800,
    Quadro FX 4800, Quadro FX 3800, GeForce 8800 GTS 512,
    GeForce 9800 GT, GeForce 8800 GT, GeForce GT 230, GeForce 9800 GX2,
    GeForce 9800 GT, GeForce 8800 GS, GeForce GTS 240, GeForce 9800M GTX,
    GeForce 8800M GTS, GeForce GTX 280M, GeForce 9800M GT,
    GeForce 8800M GTX, GeForce 8800 GS, GeForce GTX 285M,
    GeForce 9600 GSO, GeForce 8800 GT, GeForce 9800 GTX/9800 GTX+,
    GeForce 9800 GTX+, GeForce 9800 GT, GeForce GTS 250,
    GeForce 9800M GTX, GeForce GTX 260M, Quadro FX 4700 X2,
    Quadro FX 3700, Quadro VX 200, Quadro FX 3600M, Quadro FX 2800M,
    Quadro FX 3700M, Quadro FX 3800M, GeForce 9600 GT, GeForce 9600 GS,
    GeForce 9600 GSO 512, GeForce GT 130, GeForce GT 140,
    GeForce 9800M GTS, GeForce 9700M GTS, GeForce 9800M GS,
    GeForce 9800M GTS, GeForce 9600 GT, GeForce 9600 GT,
    GeForce GTS 160M, GeForce GTS 150M, GeForce 9600 GSO,
    GeForce 9600 GT, Quadro FX 1800, Quadro FX 2700M, GeForce 9500 GT,
    GeForce 9400 GT, GeForce 9500 GT, GeForce 9500 GS, GeForce 9500 GS,
    GeForce GT 120, GeForce 9600M GT, GeForce 9600M GS, GeForce 9600M GT,
    GeForce 9700M GT, GeForce 9500M G, GeForce 9650M GT, GeForce G 110M,
    GeForce GT 130M, GeForce GT 120M, GeForce GT 220M, GeForce 9650 S,
    Quadro FX 380, Quadro FX 580, Quadro FX 1700M, GeForce 9400 GT,
    Quadro FX 770M, GeForce 9300 GE, GeForce 9300 GS, GeForce 8400,
    GeForce 8400 SE, GeForce 8400 GS, GeForce 9300M GS, GeForce G100,
    GeForce 9300 SE, GeForce 9200M GS, GeForce 9300M GS, Quadro NVS 150M,
    Quadro NVS 160M, GeForce G 105M, GeForce G 103M, GeForce G105M,
    Quadro NVS 420, Quadro FX 370 LP, Quadro NVS 450, Quadro FX 370M,
    Quadro NVS 295, GeForce 9100M G, GeForce 8200M G, GeForce 9200,
    GeForce 9100, GeForce 8300, GeForce 8200, nForce 730a, GeForce 9200,
    nForce 980a/780a SLI, nForce 750a SLI, GeForce 8100 / nForce 720a,
    GeForce 9400, GeForce 9400, GeForce 9400M G, GeForce 9400M,
    GeForce 9300, ION, GeForce 9400M G, GeForce 9400, nForce 760i SLI,
    GeForce 9400, GeForce 9300 / nForce 730i, GeForce 9200,
    GeForce 9100M G, GeForce 8200M G, GeForce 9400M, GeForce 9200,
    GeForce G102M, GeForce G102M, ION, ION, GeForce 9400, ION, ION LE,
    ION LE, GeForce GT 220, GeForce 315, GeForce 210, GeForce GT 230M,
    GeForce GT 330M, GeForce GT 230M, GeForce GT 330M, NVS 5100M,
    GeForce GT 320M, GeForce GT 240M, GeForce GT 325M, Quadro FX 880M,
    GeForce G210, GeForce 205, GeForce 310, ION, GeForce 210,
    GeForce 310, GeForce 315, GeForce G105M, GeForce G105M, NVS 2100M,
    NVS 3100M, GeForce 305M, ION, GeForce 310M, GeForce 305M,
    GeForce 310M, GeForce 305M, GeForce G210M, GeForce 310M,
    Quadro FX 380 LP, Quadro FX 380M, GeForce GT 330, GeForce GT 320,
    GeForce GT 240, GeForce GT 340, GeForce GT 330, GeForce GTS 260M,
    GeForce GTS 250M, GeForce 315, GeForce GT 335M, GeForce GTS 350M,
    GeForce GTS 360M, Quadro FX 1800M
    [ 474.299] (II) VESA: driver for VESA chipsets: vesa
    [ 474.299] (II) modesetting: Driver for Modesetting Kernel Drivers: kms
    [ 474.299] (II) FBDEV: driver for framebuffer: fbdev
    [ 474.300] (--) using VT number 2
    [ 474.747] (II) Loading sub module "fb"
    [ 474.747] (II) LoadModule: "fb"
    [ 474.747] (II) Loading /usr/lib/xorg/modules/libfb.so
    [ 474.747] (II) Module fb: vendor="X.Org Foundation"
    [ 474.747] compiled for 1.14.1, module version = 1.0.0
    [ 474.747] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 474.747] (WW) Unresolved symbol: fbGetGCPrivateKey
    [ 474.747] (II) Loading sub module "wfb"
    [ 474.747] (II) LoadModule: "wfb"
    [ 474.747] (II) Loading /usr/lib/xorg/modules/libwfb.so
    [ 474.748] (II) Module wfb: vendor="X.Org Foundation"
    [ 474.748] compiled for 1.14.1, module version = 1.0.0
    [ 474.748] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 474.748] (II) Loading sub module "shadow"
    [ 474.748] (II) LoadModule: "shadow"
    [ 474.748] (II) Loading /usr/lib/xorg/modules/libshadow.so
    [ 474.748] (II) Module shadow: vendor="X.Org Foundation"
    [ 474.748] compiled for 1.14.1, module version = 1.1.0
    [ 474.748] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 474.748] (II) Loading sub module "ramdac"
    [ 474.748] (II) LoadModule: "ramdac"
    [ 474.748] (II) Module "ramdac" already built-in
    [ 474.749] (WW) Falling back to old probe method for vesa
    [ 474.749] (WW) Falling back to old probe method for modesetting
    [ 474.749] (WW) Falling back to old probe method for fbdev
    [ 474.749] (II) Loading sub module "fbdevhw"
    [ 474.749] (II) LoadModule: "fbdevhw"
    [ 474.749] (II) Loading /usr/lib/xorg/modules/libfbdevhw.so
    [ 474.749] (II) Module fbdevhw: vendor="X.Org Foundation"
    [ 474.749] compiled for 1.14.1, module version = 0.0.2
    [ 474.749] ABI class: X.Org Video Driver, version 14.1
    [ 474.749] (EE) open /dev/fb0: No such file or directory
    [ 474.749] (II) NVIDIA(0): Creating default Display subsection in Screen section
    "Default Screen Section" for depth/fbbpp 24/32
    [ 474.749] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
    [ 474.749] (==) NVIDIA(0): RGB weight 888
    [ 474.749] (==) NVIDIA(0): Default visual is TrueColor
    [ 474.749] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
    [ 474.750] (**) NVIDIA(0): Enabling 2D acceleration
    [ 474.948] (II) NVIDIA(GPU-0): Display (Acer S240HL (DFP-0)) does not support NVIDIA 3D
    [ 474.948] (II) NVIDIA(GPU-0): Vision stereo.
    [ 474.949] (II) NVIDIA(0): NVIDIA GPU GeForce GTS 250 (G92) at PCI:1:0:0 (GPU-0)
    [ 474.949] (--) NVIDIA(0): Memory: 1048576 kBytes
    [ 474.949] (--) NVIDIA(0): VideoBIOS: 62.92.7e.00.00
    [ 474.949] (II) NVIDIA(0): Detected PCI Express Link width: 16X
    [ 474.955] (--) NVIDIA(0): Valid display device(s) on GeForce GTS 250 at PCI:1:0:0
    [ 474.955] (--) NVIDIA(0): CRT-0
    [ 474.955] (--) NVIDIA(0): CRT-1
    [ 474.955] (--) NVIDIA(0): TV-0
    [ 474.955] (--) NVIDIA(0): Acer S240HL (DFP-0) (boot, connected)
    [ 474.955] (--) NVIDIA(0): DFP-1
    [ 474.955] (--) NVIDIA(0): CRT-0: 400.0 MHz maximum pixel clock
    [ 474.955] (--) NVIDIA(0): CRT-1: 400.0 MHz maximum pixel clock
    [ 474.955] (--) NVIDIA(0): TV-0: 400.0 MHz maximum pixel clock
    [ 474.955] (--) NVIDIA(0): Acer S240HL (DFP-0): 330.0 MHz maximum pixel clock
    [ 474.955] (--) NVIDIA(0): Acer S240HL (DFP-0): Internal Dual Link TMDS
    [ 474.955] (--) NVIDIA(0): DFP-1: 330.0 MHz maximum pixel clock
    [ 474.955] (--) NVIDIA(0): DFP-1: Internal Single Link TMDS
    [ 474.955] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    [ 474.955] (**) NVIDIA(0): device Acer S240HL (DFP-0) (Using EDID frequencies has
    [ 474.955] (**) NVIDIA(0): been enabled on all display devices.)
    [ 474.957] (==) NVIDIA(0):
    [ 474.957] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
    [ 474.957] (==) NVIDIA(0): will be used as the requested mode.
    [ 474.957] (==) NVIDIA(0):
    [ 474.957] (II) NVIDIA(0): Validated MetaModes:
    [ 474.957] (II) NVIDIA(0): "DFP-0:nvidia-auto-select{}"
    [ 474.957] (II) NVIDIA(0): Virtual screen size determined to be 1920 x 1080
    [ 474.987] (--) NVIDIA(0): DPI set to (92, 91); computed from "UseEdidDpi" X config
    [ 474.987] (--) NVIDIA(0): option
    [ 474.987] (II) UnloadModule: "nv"
    [ 474.988] (II) Unloading nv
    [ 474.988] (II) UnloadModule: "vesa"
    [ 474.988] (II) Unloading vesa
    [ 474.988] (II) UnloadModule: "modesetting"
    [ 474.988] (II) Unloading modesetting
    [ 474.988] (II) UnloadModule: "fbdev"
    [ 474.988] (II) Unloading fbdev
    [ 474.988] (II) UnloadSubModule: "fbdevhw"
    [ 474.988] (II) Unloading fbdevhw
    [ 474.988] (--) Depth 24 pixmap format is 32 bpp
    [ 474.988] (II) NVIDIA: Using 768.00 MB of virtual memory for indirect memory access.
    [ 474.991] (II) NVIDIA(0): ACPI: failed to connect to the ACPI event daemon; the daemon
    [ 474.991] (II) NVIDIA(0): may not be running or the "AcpidSocketPath" X
    [ 474.991] (II) NVIDIA(0): configuration option may not be set correctly. When the
    [ 474.991] (II) NVIDIA(0): ACPI event daemon is available, the NVIDIA X driver will
    [ 474.991] (II) NVIDIA(0): try to use it to receive ACPI event notifications. For
    [ 474.991] (II) NVIDIA(0): details, please see the "ConnectToAcpid" and
    [ 474.991] (II) NVIDIA(0): "AcpidSocketPath" X configuration options in Appendix B: X
    [ 474.991] (II) NVIDIA(0): Config Options in the README.
    [ 474.996] (II) NVIDIA(0): Setting mode "DFP-0:nvidia-auto-select{}"
    [ 475.029] Loading extension NV-GLX
    [ 475.039] (==) NVIDIA(0): Disabling shared memory pixmaps
    [ 475.041] (==) NVIDIA(0): Backing store disabled
    [ 475.041] (==) NVIDIA(0): Silken mouse enabled
    [ 475.042] (==) NVIDIA(0): DPMS enabled
    [ 475.042] Loading extension NV-CONTROL
    [ 475.042] Loading extension XINERAMA
    [ 475.042] (II) Loading sub module "dri2"
    [ 475.042] (II) LoadModule: "dri2"
    [ 475.042] (II) Module "dri2" already built-in
    [ 475.042] (II) NVIDIA(0): [DRI2] Setup complete
    [ 475.042] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
    [ 475.042] (--) RandR disabled
    [ 475.046] (II) Initializing extension GLX
    [ 475.195] (II) config/udev: Adding input device Power Button (/dev/input/event4)
    [ 475.195] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 475.195] (II) LoadModule: "evdev"
    [ 475.196] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 475.196] (II) Module evdev: vendor="X.Org Foundation"
    [ 475.196] compiled for 1.14.0, module version = 2.8.0
    [ 475.196] Module class: X.Org XInput Driver
    [ 475.196] ABI class: X.Org XInput driver, version 19.1
    [ 475.196] (II) Using input driver 'evdev' for 'Power Button'
    [ 475.196] (**) Power Button: always reports core events
    [ 475.196] (**) evdev: Power Button: Device: "/dev/input/event4"
    [ 475.196] (--) evdev: Power Button: Vendor 0 Product 0x1
    [ 475.196] (--) evdev: Power Button: Found keys
    [ 475.196] (II) evdev: Power Button: Configuring as keyboard
    [ 475.196] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input4/event4"
    [ 475.196] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
    [ 475.196] (**) Option "xkb_rules" "evdev"
    [ 475.196] (**) Option "xkb_model" "evdev"
    [ 475.196] (**) Option "xkb_layout" "us"
    [ 475.217] (II) config/udev: Adding input device Power Button (/dev/input/event3)
    [ 475.217] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 475.217] (II) Using input driver 'evdev' for 'Power Button'
    [ 475.217] (**) Power Button: always reports core events
    [ 475.217] (**) evdev: Power Button: Device: "/dev/input/event3"
    [ 475.217] (--) evdev: Power Button: Vendor 0 Product 0x1
    [ 475.217] (--) evdev: Power Button: Found keys
    [ 475.218] (II) evdev: Power Button: Configuring as keyboard
    [ 475.218] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input3/event3"
    [ 475.218] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
    [ 475.218] (**) Option "xkb_rules" "evdev"
    [ 475.218] (**) Option "xkb_model" "evdev"
    [ 475.218] (**) Option "xkb_layout" "us"
    [ 475.218] (II) config/udev: Adding drm device (/dev/dri/card0)
    [ 475.218] (II) config/udev: Adding drm device (/dev/dri/card0)
    [ 475.218] setversion 1.4 failed
    [ 475.218] (II) config/udev: Adding input device A4TECH USB Device (/dev/input/event1)
    [ 475.219] (**) A4TECH USB Device: Applying InputClass "evdev keyboard catchall"
    [ 475.219] (II) Using input driver 'evdev' for 'A4TECH USB Device'
    [ 475.219] (**) A4TECH USB Device: always reports core events
    [ 475.219] (**) evdev: A4TECH USB Device: Device: "/dev/input/event1"
    [ 475.219] (II) evdev: A4TECH USB Device: Using mtdev for this device
    [ 475.219] (--) evdev: A4TECH USB Device: Vendor 0x9da Product 0x9090
    [ 475.219] (--) evdev: A4TECH USB Device: Found 1 mouse buttons
    [ 475.219] (--) evdev: A4TECH USB Device: Found scroll wheel(s)
    [ 475.219] (--) evdev: A4TECH USB Device: Found relative axes
    [ 475.219] (--) evdev: A4TECH USB Device: Found absolute axes
    [ 475.219] (--) evdev: A4TECH USB Device: Found absolute multitouch axes
    [ 475.219] (--) evdev: A4TECH USB Device: Found x and y absolute axes
    [ 475.219] (--) evdev: A4TECH USB Device: Found keys
    [ 475.219] (II) evdev: A4TECH USB Device: Forcing relative x/y axes to exist.
    [ 475.219] (II) evdev: A4TECH USB Device: Configuring as mouse
    [ 475.219] (II) evdev: A4TECH USB Device: Configuring as keyboard
    [ 475.219] (II) evdev: A4TECH USB Device: Adding scrollwheel support
    [ 475.219] (**) evdev: A4TECH USB Device: YAxisMapping: buttons 4 and 5
    [ 475.219] (**) evdev: A4TECH USB Device: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [ 475.219] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.3/usb4/4-1/4-1:1.0/input/input1/event1"
    [ 475.219] (II) XINPUT: Adding extended input device "A4TECH USB Device" (type: KEYBOARD, id 8)
    [ 475.219] (**) Option "xkb_rules" "evdev"
    [ 475.219] (**) Option "xkb_model" "evdev"
    [ 475.220] (**) Option "xkb_layout" "us"
    [ 475.220] (II) evdev: A4TECH USB Device: initialized for relative axes.
    [ 475.220] (WW) evdev: A4TECH USB Device: ignoring absolute axes.
    [ 475.220] (**) A4TECH USB Device: (accel) keeping acceleration scheme 1
    [ 475.220] (**) A4TECH USB Device: (accel) acceleration profile 0
    [ 475.220] (**) A4TECH USB Device: (accel) acceleration factor: 2.000
    [ 475.220] (**) A4TECH USB Device: (accel) acceleration threshold: 4
    [ 475.220] (II) config/udev: Adding input device A4TECH USB Device (/dev/input/js0)
    [ 475.220] (II) No input driver specified, ignoring this device.
    [ 475.230] (II) This device may have been added with another device file.
    [ 475.230] (II) config/udev: Adding input device A4TECH USB Device (/dev/input/event2)
    [ 475.230] (**) A4TECH USB Device: Applying InputClass "evdev pointer catchall"
    [ 475.230] (II) Using input driver 'evdev' for 'A4TECH USB Device'
    [ 475.230] (**) A4TECH USB Device: always reports core events
    [ 475.230] (**) evdev: A4TECH USB Device: Device: "/dev/input/event2"
    [ 475.230] (--) evdev: A4TECH USB Device: Vendor 0x9da Product 0x9090
    [ 475.231] (--) evdev: A4TECH USB Device: Found 20 mouse buttons
    [ 475.231] (--) evdev: A4TECH USB Device: Found scroll wheel(s)
    [ 475.231] (--) evdev: A4TECH USB Device: Found relative axes
    [ 475.231] (--) evdev: A4TECH USB Device: Found x and y relative axes
    [ 475.231] (II) evdev: A4TECH USB Device: Configuring as mouse
    [ 475.231] (II) evdev: A4TECH USB Device: Adding scrollwheel support
    [ 475.231] (**) evdev: A4TECH USB Device: YAxisMapping: buttons 4 and 5
    [ 475.231] (**) evdev: A4TECH USB Device: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [ 475.231] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.3/usb4/4-1/4-1:1.1/input/input2/event2"
    [ 475.231] (II) XINPUT: Adding extended input device "A4TECH USB Device" (type: MOUSE, id 9)
    [ 475.231] (II) evdev: A4TECH USB Device: initialized for relative axes.
    [ 475.231] (**) A4TECH USB Device: (accel) keeping acceleration scheme 1
    [ 475.231] (**) A4TECH USB Device: (accel) acceleration profile 0
    [ 475.231] (**) A4TECH USB Device: (accel) acceleration factor: 2.000
    [ 475.231] (**) A4TECH USB Device: (accel) acceleration threshold: 4
    [ 475.231] (II) config/udev: Adding input device A4TECH USB Device (/dev/input/mouse0)
    [ 475.231] (II) No input driver specified, ignoring this device.
    [ 475.231] (II) This device may have been added with another device file.
    [ 475.232] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
    [ 475.232] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
    [ 475.232] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
    [ 475.232] (**) AT Translated Set 2 keyboard: always reports core events
    [ 475.232] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
    [ 475.232] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
    [ 475.232] (--) evdev: AT Translated Set 2 keyboard: Found keys
    [ 475.232] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
    [ 475.232] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
    [ 475.232] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 10)
    [ 475.232] (**) Option "xkb_rules" "evdev"
    [ 475.232] (**) Option "xkb_model" "evdev"
    [ 475.232] (**) Option "xkb_layout" "us"
    [ 480.188] (EE)
    [ 480.189] (EE) Backtrace:
    [ 480.189] (EE) 0: X (xorg_backtrace+0x3d) [0x57f48d]
    [ 480.189] (EE) 1: X (0x400000+0x1831e9) [0x5831e9]
    [ 480.189] (EE) 2: /usr/lib/libpthread.so.0 (0x7f10e9de6000+0xf0e0) [0x7f10e9df50e0]
    [ 480.189] (EE) 3: ?? [0x4106cb15]
    [ 480.189] (EE)
    [ 480.189] (EE) Segmentation fault at address 0x0
    [ 480.189]
    Fatal server error:
    [ 480.189] Caught signal 11 (Segmentation fault). Server aborting
    [ 480.189]
    [ 480.189] (EE)
    Please consult the The X.Org Foundation support
    at http://wiki.x.org
    for help.
    [ 480.189] (EE) Please also check the log file at "/var/log/Xorg.2.log" for additional information.
    [ 480.189] (EE)
    [ 480.526] Server terminated with error (1). Closing log file.
    My system is fully updated and apparently video is fine:
    $ sudo pacman -Syyuw
    :: Synchronizing package databases...
    :: Starting full system upgrade...
    there is nothing to do
    $ glxinfo |grep '^Open\|^dir'
    direct rendering: Yes
    OpenGL vendor string: NVIDIA Corporation
    OpenGL renderer string: GeForce GTS 250/PCIe/SSE2
    OpenGL core profile version string: 3.3.0 NVIDIA 319.23
    OpenGL core profile shading language version string: 3.30 NVIDIA via Cg compiler
    OpenGL core profile context flags: (none)
    OpenGL core profile profile mask: core profile
    OpenGL core profile extensions:
    OpenGL version string: 3.3.0 NVIDIA 319.23
    OpenGL shading language version string: 3.30 NVIDIA via Cg compiler
    OpenGL context flags: (none)
    OpenGL profile mask: (none)
    OpenGL extensions:
    $
    I have no idea of what to try... any insight?
    Solved, it was really stupid. For some reason my Multilib repo got disable in the pacman config. So the 32bit nvidia drivers were old...
    Last edited by ezzetabi (2013-06-23 14:10:36)

    Yeah, sorry I didn't notice this post sooner, or I could have saved you some trouble shooting. 
    After testing and discussion on NVIDIA forums with someone else having the same problem, we realized that it is apparently a problem with any Xorg 1.7 release using Xinerama with a monitor positioned Left of another display.
    The person I was talking to said he bugged it, and rearranged his monitors right of.  I downgraded to xorg 1.6 and haven't given it too much though since.  I should probably follow up on that and submit a bug to xorg or something...  or you are welcome to!
    Works great with Xinerama turned off, which is actually a fine option for me since I don't tend to move windows between displays, except I am using Xinerama to work around an xmonad bug in handling multiple non-Xinerama displays.  I would have never caught it if I hadn't tried turning Xin on to fix the xmonad issue right before the 1.7 upgrade and gotten curious why my setup started going crazy (since I have a monitor with two monitors to the left of it)..
    One thing that also works is making your left most monitor screen 0 and setting the other two monitors to be RightOf it, or at least that worked for me.  Unfortunately, my left most monitor is a 46 inch tv that is often turned off or on a different input, so I can't really have it being screen 0.

  • I am having many problems with the CC 2014 application manager update

    I have 2 seats. Thus I have CC 2014 installed on four computers. All four are high end desktops with Windows 7 Ultimate 64 bit installed, all four with the latest patches. All four also use high end nvidia graphics cards all with the latest drivers.
    On all four, when I tried to update the application manager, only the frame of update the window was visible. Then, when I moused over the empty frame, the blue update button became visible, but nothing else. Since the common thread is nvidia drivers, it seems there may be a conflict. But one card is a Quadro FX 5800, another is 2x SLI NVIDIA GeForce GTX 285, another is an NVIDIA GeForce GTX 680 2GB, and the fourth is an NVIDIA GeForce GTX 780 3Gb. So all four have different cards.
    I went ahead and installed the app mgr update and all the program updates on all four computers. All four had problems, two of them serious.
    On one computer, there were problems booting up. The boot up problems went away when I restored to a prior image. I tried several times. The problem persisted. I finally gave up on updating this computer.
    This boot up problem then happened on a second computer. I restored to a prior image and the problem went away here as well. I then tried the installs again. This time, the computer booted fine, but I lost the ability to send email. I use Thunderbird and have had no problems sending email ever (for at least the past 8 years). So I again restored to a prior image and the email problem went away. I then tried the installs a third time. Same result. Investigating, I was able to get an alternate outgoing mail server to work (that of my company site). But I never got the Verizon server to work. Incoming? Yes. But no outgoing.
    On the third computer, I also had problems booting. But rebooting many times seems to have solved the problem. Unfortunately, Premiere crashes so often I've reverted to CC.
    I realize that Adobe puts much work into making their software better. And I depend on it every day. But to be honest, I've just spent several whole days trying to fix broken computers. And my confidence in Adobe is at an all time low.
    I so regret not staying with CC.

    >regret not staying with CC
    Previous via Cloud http://helpx.adobe.com/creative-cloud/help/install-apps.html#previous

  • Looking for a better graphic card. Need feedback and suggestion

    I'm looking to get a different graphic card but I'm not sure really what to buy,
    These are my computer specs 
    Computer: Gateway Gt5228 Media center edition
    OS: Windows Xp
     Current graphic card: NVIDIA GeForce 6100 PCI Express Slot avaliable
    I was wondering what would be a good graphic card that is a good significant upgrade.  I'm looking for one that has a significant increase over what I have right now, it doesn't necessarily have to be the best out there.
    I want to be able to play a game call Diablo 3 
    These are the High and low Performance, that the game will run with.
     Supported - High PerformanceNVIDIA AMD/ATI INTEL
    GeForce GTX 590
    Radeon HD 6990
    N/A
    GeForce GTX 580
    Radeon HD 6970
    GeForce GTX 570
    Radeon HD 6950
    GeForce GTX 560 ti
    Radeon HD 6870
    GeForce GTX 550 ti
    Radeon HD 6850
    GeForce GTX 480
    Radeon HD 6790
    GeForce GTX 470
    Radeon HD 6770
    GeForce GTX 465
    Radeon HD 6750
    GeForce GTX 460
    Radeon HD 5970
    GeForce GTS 360M
    Radeon HD 5870
    GeForce GTX 295
    Radeon HD 5850
    GeForce GTX 285
    Radeon HD 5830
    Geforce GTX 280
    Radeon HD 5770
    Geforce GTX 280M
    Radeon HD 5750
    GeForce GTX 275
    Radeon HD 4870
    GeForce GTX 260
    Radeon HD 4870
    Quadro FX 5800
    Radeon HD 4850
    Radeon HD 4800
    FirePro 3D V8750
    FirePro 3D V8700
    FireStream 9370
    Firestream 9350
    FireStream 9270
    FireStream 9250
     Supported - Low PerformanceNVIDIA AMD/ATI INTEL
    GeForce 9500 GT
    Radeon HD 3650 AGP
    HD Graphics 4000
    GeForce 9400 GT
    Radeon HD 3650
    HD Graphics 3000
    GeForce 9300 GS
    Radeon HD 3600
    HD Graphics 2000/1000
    GeForce 8800 GS
    Radeon HD 3470                   
    GeForce 8600 GT
    Radeon HD 3450
    GeForce 8600 GTS
    Radeon HD 3430
    GeForce 8500 GT
    Radeon HD 3200
    GeForce 8400 GS
    Radeon HD 3100
    GeForce 8400
    Radeon HD 2600 XT AGP
    GeForce 8300 GS
    Radeon HD 2600 XT
    GeForce 8300
    Radeon HD 2400 Series
    GeForce 8200
    Radeon HD 2350
    GeForce 8100
    Radeon HD 2100
    GeForce 7950
    Mobility Radeon HD 4530
    GeForce 7900
    Mobility Radeon HD 4330
    GeForce 7900 GS
    Mobility Radeon HD 2600 XT
    GeForce 9500M GS
    Mobility Radeon HD 2600
    GeForce 9500M G
    Mobility Radeon HD 2600
    GeForce 9400M
    Mobility Radeon HD 2400 XT
    GeForce 8600M GT
    Mobility Radeon HD 2400
    GeForce Go 7900
    Mobility Radeon HD 2300
    GeForce Go 7800
    Mobility Radeon X2300
    Quadro FX 5500
    Radeon X1950 Series
    Quadro FX 4500
    Radeon E2400
    Quadro FX 4000
    FirePro 3D V7750
    Quadro FX 3500
    FirePro 3D V5700
    Quadro FX 3450
    Any help would be greatly appreciated
    Which ones can i use with my computer but without the need to buy nothing else. 
    thank you
    -Geo

    Honestly I wouldn't spend too much trying to upgrade your computer. It has an aging dual core Athlon processor, and only 2GB of RAM. Even with the highest top of the line card, with that CPU/RAM setup, your computer is probably going to struggle to run it.
    Hate to be the bearer of bad news.
    If you like my post, or solution to your issue/question, go ahead and click on the little star by my name and/or accept the post as the Solution. It makes me happy.
    I'm NOT an employee of Best Buy, or Geek Squad, though I did work as an Agent for a year 5 years ago. None of my posts are to be taken as the official stance that Best Buy will take on your situation. My advice is just that, advice.
    Unfortunately, that's the bad luck of any electronic, there's going to be bad Apples... wait that's a horrible pun.

  • Adobe after effects not responding, ever!

    I have been having this issue for a long time and cant seem to find a solution, maybe I am wording it wrong, i dont know. It worked just fine for about a year, but now basically every single time I open adobe after effects cs5 it works for about 1-2 minutes and then freezes, the typical "this program is not responding" message shows up with no error code. it doesnt matter what I do or what I click on, it happens every single time! Its really frusterating! my computer has 32 gb, I'm sure that is plenty of RAM. I have done all the updates on the adobe website (including the quicktime updates) I saw OpenGL mentioned many times but I cant seem to find anything like that on my computer so I dont know if that is a problem or not. I noticed on the sytem requirements list (I have a windows 7 professional) they said that the processor must be Intel® Core™2 Duo or AMD Phenom® and my computer has intel (R) Xeon(R) cpu  5160 @   3.00GHZ  3.00 ghz (2 processors) I honestly have no idea if that would be a problem. If anyone else has had this issue I would love to hear how you fixed it, I have tried so many things chances are I already tried it but still.

    okay sorry it took so long, this is my dads old computer so I had to keep calling him haha. so I literally anwered everything, I really want to find a solution!
    1) adobe after effects cs5 with the 10.0.2 update
    2) on the adobe website it looks like this is the most recent update for cs5 on windows
    3) windows 7 professional 64 bit opetrating system
    4) intel(R) Xeon(R) CPU, 2 processors, 32 GB of ram, NVIDIA Quadro FX 5800, 2 disk drives, no external drives
    5) NVIDIA Quadro FX 5800
    I couldnt seem to find anything about CUDA , I googled it but couldnt find anything to tell me how to find out this info, if you know please let me know
    6) nvidia quadro fx 5800
    7) source footage is microsoft video AVI, with quicktime
    8) it was just the typical "this program is not responding, please wait for the program to respond" I let it run a couple times to see if it ever responded but it never did. but the last couple of times I opened AE it just freezes and no message shows up.
    9) it doesnt matter what I do, even if I just open it and let it sit there it still freezes up.
    10) it worked for about a year, I dont beleive anything major has changed on my computer, but I have been stuggling with this problem so long I wouldnt be able to remember anyways.
    11) yes quicktime is installed and updated, it is version 7.7.4
    12) I usually dont have anything else running other than AE
    13) I asked my dad about this and he said he didnt think so so I assume that means no.
    14) yes I have openGL enabled
    15) within the first two minutes of opening AE doesnt matter if I am editing, ram previewing, or nothing.
    16) I have tried checking and unchecking the "render multiple frames simultaneously multiprocessing" and the problem occurs either way, but right now I am using it.
    17) no use of ray traced 3d rendering
    18) not an out put problem
    19) exact sequence of steps? well... I click on adobe after effects, it opens kinda slower than it used to, then I usually will his ram preview because then I can see when it stops exactly, but I also have tried opening it and just looked at settings or preferences or what not and it would freeze then, or I will click on a diffrent compositions and it would freeze. pretty much whatever steps I take it always happens.

  • [SOLVED] nvidia and xorg-server, slow start compared to nv

    I've seen many similar topics but none that have been solved, therefore the new topic.
    Starting xorg with nv driver takes just a few seconds to desktop, while using nvidia takes almost 10 seconds more to get to desktop. Although after reaching desktop everything works fine. I've used a minimal xorg.conf for each driver (replacing nvidia with nv):
    Section "Device"
    Identifier "Device0"
    Driver "nvidia"
    EndSection
    The /var/log/Xorg.0.log when using nvidia:
    [ 22.779]
    X.Org X Server 1.12.2
    Release Date: 2012-05-29
    [ 22.779] X Protocol Version 11, Revision 0
    [ 22.779] Build Operating System: Linux 3.0.32-1-lts x86_64
    [ 22.779] Current Operating System: Linux yggdrasil 3.3.8-1-ARCH #1 SMP PREEMPT Tue Jun 5 15:20:32 CEST 2012 x86_64
    [ 22.779] Kernel command line: root=/dev/mapper/root cryptdevice=/dev/sda2:root ro vga=773 quiet
    [ 22.779] Build Date: 30 May 2012 07:24:13PM
    [ 22.779]
    [ 22.779] Current version of pixman: 0.26.0
    [ 22.779] Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    [ 22.779] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 22.779] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Jun 9 21:37:16 2012
    [ 22.844] (==) Using config file: "/etc/X11/xorg.conf"
    [ 22.844] (==) Using config directory: "/etc/X11/xorg.conf.d"
    [ 23.106] (==) No Layout section. Using the first Screen section.
    [ 23.106] (==) No screen section available. Using defaults.
    [ 23.106] (**) |-->Screen "Default Screen Section" (0)
    [ 23.106] (**) | |-->Monitor "<default monitor>"
    [ 23.106] (==) No device specified for screen "Default Screen Section".
    Using the first device section listed.
    [ 23.106] (**) | |-->Device "Device0"
    [ 23.106] (==) No monitor specified for screen "Default Screen Section".
    Using a default monitor configuration.
    [ 23.106] (==) Automatically adding devices
    [ 23.106] (==) Automatically enabling devices
    [ 23.219] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
    [ 23.219] Entry deleted from font path.
    [ 23.414] (==) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/,
    /usr/share/fonts/Type1/,
    /usr/share/fonts/100dpi/,
    /usr/share/fonts/75dpi/
    [ 23.414] (==) ModulePath set to "/usr/lib/xorg/modules"
    [ 23.414] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
    [ 23.414] (II) Loader magic: 0x7c58e0
    [ 23.414] (II) Module ABI versions:
    [ 23.414] X.Org ANSI C Emulation: 0.4
    [ 23.414] X.Org Video Driver: 12.0
    [ 23.414] X.Org XInput driver : 16.0
    [ 23.414] X.Org Server Extension : 6.0
    [ 23.415] (--) PCI:*(0:2:0:0) 10de:0a70:144d:c079 rev 162, Mem @ 0xdc000000/16777216, 0xe0000000/268435456, 0xde000000/33554432, I/O @ 0x00002000/128, BIOS @ 0x????????/524288
    [ 23.415] (II) Open ACPI successful (/var/run/acpid.socket)
    [ 23.415] (II) LoadModule: "extmod"
    [ 23.453] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
    [ 23.487] (II) Module extmod: vendor="X.Org Foundation"
    [ 23.487] compiled for 1.12.2, module version = 1.0.0
    [ 23.487] Module class: X.Org Server Extension
    [ 23.487] ABI class: X.Org Server Extension, version 6.0
    [ 23.487] (II) Loading extension MIT-SCREEN-SAVER
    [ 23.487] (II) Loading extension XFree86-VidModeExtension
    [ 23.487] (II) Loading extension XFree86-DGA
    [ 23.487] (II) Loading extension DPMS
    [ 23.487] (II) Loading extension XVideo
    [ 23.487] (II) Loading extension XVideo-MotionCompensation
    [ 23.487] (II) Loading extension X-Resource
    [ 23.487] (II) LoadModule: "dbe"
    [ 23.487] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
    [ 23.512] (II) Module dbe: vendor="X.Org Foundation"
    [ 23.512] compiled for 1.12.2, module version = 1.0.0
    [ 23.512] Module class: X.Org Server Extension
    [ 23.512] ABI class: X.Org Server Extension, version 6.0
    [ 23.512] (II) Loading extension DOUBLE-BUFFER
    [ 23.512] (II) LoadModule: "glx"
    [ 23.512] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    [ 26.824] (II) Module glx: vendor="NVIDIA Corporation"
    [ 26.868] compiled for 4.0.2, module version = 1.0.0
    [ 26.868] Module class: X.Org Server Extension
    [ 26.868] (II) NVIDIA GLX Module 295.53 Fri May 11 23:49:08 PDT 2012
    [ 26.869] (II) Loading extension GLX
    [ 26.869] (II) LoadModule: "record"
    [ 26.869] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
    [ 26.941] (II) Module record: vendor="X.Org Foundation"
    [ 26.941] compiled for 1.12.2, module version = 1.13.0
    [ 26.941] Module class: X.Org Server Extension
    [ 26.941] ABI class: X.Org Server Extension, version 6.0
    [ 26.941] (II) Loading extension RECORD
    [ 26.941] (II) LoadModule: "dri"
    [ 26.941] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
    [ 27.011] (II) Module dri: vendor="X.Org Foundation"
    [ 27.011] compiled for 1.12.2, module version = 1.0.0
    [ 27.011] ABI class: X.Org Server Extension, version 6.0
    [ 27.011] (II) Loading extension XFree86-DRI
    [ 27.011] (II) LoadModule: "dri2"
    [ 27.011] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
    [ 27.046] (II) Module dri2: vendor="X.Org Foundation"
    [ 27.047] compiled for 1.12.2, module version = 1.2.0
    [ 27.047] ABI class: X.Org Server Extension, version 6.0
    [ 27.047] (II) Loading extension DRI2
    [ 27.047] (II) LoadModule: "nvidia"
    [ 27.122] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
    [ 27.306] (II) Module nvidia: vendor="NVIDIA Corporation"
    [ 27.306] compiled for 4.0.2, module version = 1.0.0
    [ 27.306] Module class: X.Org Video Driver
    [ 27.608] (II) NVIDIA dlloader X Driver 295.53 Fri May 11 23:29:56 PDT 2012
    [ 27.608] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
    [ 27.617] (++) using VT number 7
    [ 27.678] (II) Loading sub module "fb"
    [ 27.678] (II) LoadModule: "fb"
    [ 27.850] (II) Loading /usr/lib/xorg/modules/libfb.so
    [ 27.870] (II) Module fb: vendor="X.Org Foundation"
    [ 27.870] compiled for 1.12.2, module version = 1.0.0
    [ 27.870] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 27.870] (II) Loading sub module "wfb"
    [ 27.870] (II) LoadModule: "wfb"
    [ 27.871] (II) Loading /usr/lib/xorg/modules/libwfb.so
    [ 27.879] (II) Module wfb: vendor="X.Org Foundation"
    [ 27.879] compiled for 1.12.2, module version = 1.0.0
    [ 27.879] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 27.879] (II) Loading sub module "ramdac"
    [ 27.879] (II) LoadModule: "ramdac"
    [ 27.879] (II) Module "ramdac" already built-in
    [ 27.934] (II) NVIDIA(0): Creating default Display subsection in Screen section
    "Default Screen Section" for depth/fbbpp 24/32
    [ 27.934] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
    [ 27.934] (==) NVIDIA(0): RGB weight 888
    [ 27.934] (==) NVIDIA(0): Default visual is TrueColor
    [ 27.934] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
    [ 27.935] (**) NVIDIA(0): Enabling 2D acceleration
    [ 29.873] (II) NVIDIA(GPU-0): Display (Chi Mei Optoelectronics corp. (DFP-0)) does not
    [ 29.873] (II) NVIDIA(GPU-0): support NVIDIA 3D Vision stereo.
    [ 30.786] (II) NVIDIA(0): NVIDIA GPU GeForce 310M (GT218) at PCI:2:0:0 (GPU-0)
    [ 30.786] (--) NVIDIA(0): Memory: 524288 kBytes
    [ 30.786] (--) NVIDIA(0): VideoBIOS: 70.18.53.00.ff
    [ 30.786] (II) NVIDIA(0): Detected PCI Express Link width: 16X
    [ 30.786] (--) NVIDIA(0): Interlaced video modes are supported on this GPU
    [ 30.789] (--) NVIDIA(0): Connected display device(s) on GeForce 310M at PCI:2:0:0
    [ 30.789] (--) NVIDIA(0): Chi Mei Optoelectronics corp. (DFP-0)
    [ 30.789] (--) NVIDIA(0): Chi Mei Optoelectronics corp. (DFP-0): 330.0 MHz maximum pixel
    [ 30.789] (--) NVIDIA(0): clock
    [ 30.789] (--) NVIDIA(0): Chi Mei Optoelectronics corp. (DFP-0): Internal Dual Link
    [ 30.789] (--) NVIDIA(0): LVDS
    [ 30.789] (**) NVIDIA(0): Using HorizSync/VertRefresh ranges from the EDID for display
    [ 30.789] (**) NVIDIA(0): device Chi Mei Optoelectronics corp. (DFP-0) (Using EDID
    [ 30.789] (**) NVIDIA(0): frequencies has been enabled on all display devices.)
    [ 30.836] (II) NVIDIA(0): Assigned Display Device: DFP-0
    [ 30.836] (==) NVIDIA(0):
    [ 30.836] (==) NVIDIA(0): No modes were requested; the default mode "nvidia-auto-select"
    [ 30.836] (==) NVIDIA(0): will be used as the requested mode.
    [ 30.836] (==) NVIDIA(0):
    [ 30.836] (II) NVIDIA(0): Validated modes:
    [ 30.836] (II) NVIDIA(0): "nvidia-auto-select"
    [ 30.836] (II) NVIDIA(0): Virtual screen size determined to be 1366 x 768
    [ 31.892] (--) NVIDIA(0): DPI set to (99, 102); computed from "UseEdidDpi" X config
    [ 31.892] (--) NVIDIA(0): option
    [ 31.892] (--) Depth 24 pixmap format is 32 bpp
    [ 31.892] (II) NVIDIA: Using 768.00 MB of virtual memory for indirect memory access.
    [ 31.900] (II) NVIDIA(0): Setting mode "nvidia-auto-select"
    [ 34.862] (II) Loading extension NV-GLX
    [ 37.299] (==) NVIDIA(0): Disabling shared memory pixmaps
    [ 37.299] (==) NVIDIA(0): Backing store disabled
    [ 37.299] (==) NVIDIA(0): Silken mouse enabled
    [ 37.300] (==) NVIDIA(0): DPMS enabled
    [ 37.300] (II) Loading extension NV-CONTROL
    [ 37.300] (II) Loading extension XINERAMA
    [ 37.300] (II) Loading sub module "dri2"
    [ 37.300] (II) LoadModule: "dri2"
    [ 37.300] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
    [ 37.300] (II) Module dri2: vendor="X.Org Foundation"
    [ 37.300] compiled for 1.12.2, module version = 1.2.0
    [ 37.300] ABI class: X.Org Server Extension, version 6.0
    [ 37.300] (II) NVIDIA(0): [DRI2] Setup complete
    [ 37.300] (II) NVIDIA(0): [DRI2] VDPAU driver: nvidia
    [ 37.301] (==) RandR enabled
    [ 37.301] (II) Initializing built-in extension Generic Event Extension
    [ 37.301] (II) Initializing built-in extension SHAPE
    [ 37.301] (II) Initializing built-in extension MIT-SHM
    [ 37.301] (II) Initializing built-in extension XInputExtension
    [ 37.301] (II) Initializing built-in extension XTEST
    [ 37.301] (II) Initializing built-in extension BIG-REQUESTS
    [ 37.301] (II) Initializing built-in extension SYNC
    [ 37.301] (II) Initializing built-in extension XKEYBOARD
    [ 37.301] (II) Initializing built-in extension XC-MISC
    [ 37.301] (II) Initializing built-in extension SECURITY
    [ 37.301] (II) Initializing built-in extension XINERAMA
    [ 37.301] (II) Initializing built-in extension XFIXES
    [ 37.301] (II) Initializing built-in extension RENDER
    [ 37.301] (II) Initializing built-in extension RANDR
    [ 37.301] (II) Initializing built-in extension COMPOSITE
    [ 37.301] (II) Initializing built-in extension DAMAGE
    [ 37.302] (II) Initializing extension GLX
    [ 38.717] (II) config/udev: Adding input device Power Button (/dev/input/event6)
    [ 38.717] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 38.717] (**) Power Button: Applying InputClass "Keyboard Defaults"
    [ 38.717] (II) LoadModule: "evdev"
    [ 38.717] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 38.769] (II) Module evdev: vendor="X.Org Foundation"
    [ 38.769] compiled for 1.12.0, module version = 2.7.0
    [ 38.769] Module class: X.Org XInput Driver
    [ 38.769] ABI class: X.Org XInput driver, version 16.0
    [ 38.769] (II) Using input driver 'evdev' for 'Power Button'
    [ 38.769] (**) Power Button: always reports core events
    [ 38.769] (**) evdev: Power Button: Device: "/dev/input/event6"
    [ 38.769] (--) evdev: Power Button: Vendor 0 Product 0x1
    [ 38.769] (--) evdev: Power Button: Found keys
    [ 38.769] (II) evdev: Power Button: Configuring as keyboard
    [ 38.769] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input6/event6"
    [ 38.769] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
    [ 38.769] (**) Option "xkb_rules" "evdev"
    [ 38.769] (**) Option "xkb_model" "evdev"
    [ 38.769] (**) Option "xkb_layout" "se"
    [ 38.835] (II) config/udev: Adding input device Video Bus (/dev/input/event7)
    [ 38.835] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
    [ 38.835] (**) Video Bus: Applying InputClass "Keyboard Defaults"
    [ 38.835] (II) Using input driver 'evdev' for 'Video Bus'
    [ 38.835] (**) Video Bus: always reports core events
    [ 38.835] (**) evdev: Video Bus: Device: "/dev/input/event7"
    [ 38.835] (--) evdev: Video Bus: Vendor 0 Product 0x6
    [ 38.835] (--) evdev: Video Bus: Found keys
    [ 38.835] (II) evdev: Video Bus: Configuring as keyboard
    [ 38.835] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input7/event7"
    [ 38.835] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
    [ 38.836] (**) Option "xkb_rules" "evdev"
    [ 38.836] (**) Option "xkb_model" "evdev"
    [ 38.836] (**) Option "xkb_layout" "se"
    [ 38.837] (II) config/udev: Adding input device Power Button (/dev/input/event4)
    [ 38.837] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 38.837] (**) Power Button: Applying InputClass "Keyboard Defaults"
    [ 38.837] (II) Using input driver 'evdev' for 'Power Button'
    [ 38.837] (**) Power Button: always reports core events
    [ 38.837] (**) evdev: Power Button: Device: "/dev/input/event4"
    [ 38.837] (--) evdev: Power Button: Vendor 0 Product 0x1
    [ 38.837] (--) evdev: Power Button: Found keys
    [ 38.837] (II) evdev: Power Button: Configuring as keyboard
    [ 38.837] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4/event4"
    [ 38.837] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
    [ 38.837] (**) Option "xkb_rules" "evdev"
    [ 38.837] (**) Option "xkb_model" "evdev"
    [ 38.837] (**) Option "xkb_layout" "se"
    [ 38.838] (II) config/udev: Adding input device Lid Switch (/dev/input/event3)
    [ 38.838] (II) No input driver specified, ignoring this device.
    [ 38.838] (II) This device may have been added with another device file.
    [ 38.838] (II) config/udev: Adding input device Sleep Button (/dev/input/event5)
    [ 38.838] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
    [ 38.838] (**) Sleep Button: Applying InputClass "Keyboard Defaults"
    [ 38.838] (II) Using input driver 'evdev' for 'Sleep Button'
    [ 38.838] (**) Sleep Button: always reports core events
    [ 38.838] (**) evdev: Sleep Button: Device: "/dev/input/event5"
    [ 38.839] (--) evdev: Sleep Button: Vendor 0 Product 0x3
    [ 38.839] (--) evdev: Sleep Button: Found keys
    [ 38.839] (II) evdev: Sleep Button: Configuring as keyboard
    [ 38.839] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input5/event5"
    [ 38.839] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
    [ 38.839] (**) Option "xkb_rules" "evdev"
    [ 38.839] (**) Option "xkb_model" "evdev"
    [ 38.839] (**) Option "xkb_layout" "se"
    [ 38.840] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event13)
    [ 38.840] (II) No input driver specified, ignoring this device.
    [ 38.840] (II) This device may have been added with another device file.
    [ 38.840] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event14)
    [ 38.840] (II) No input driver specified, ignoring this device.
    [ 38.840] (II) This device may have been added with another device file.
    [ 38.841] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event15)
    [ 38.841] (II) No input driver specified, ignoring this device.
    [ 38.841] (II) This device may have been added with another device file.
    [ 38.841] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event16)
    [ 38.841] (II) No input driver specified, ignoring this device.
    [ 38.841] (II) This device may have been added with another device file.
    [ 38.842] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event1)
    [ 38.842] (**) Logitech USB Receiver: Applying InputClass "evdev pointer catchall"
    [ 38.842] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
    [ 38.842] (**) Logitech USB Receiver: always reports core events
    [ 38.842] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event1"
    [ 38.842] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc521
    [ 38.842] (--) evdev: Logitech USB Receiver: Found 20 mouse buttons
    [ 38.842] (--) evdev: Logitech USB Receiver: Found scroll wheel(s)
    [ 38.842] (--) evdev: Logitech USB Receiver: Found relative axes
    [ 38.842] (--) evdev: Logitech USB Receiver: Found x and y relative axes
    [ 38.842] (II) evdev: Logitech USB Receiver: Configuring as mouse
    [ 38.842] (II) evdev: Logitech USB Receiver: Adding scrollwheel support
    [ 38.842] (**) evdev: Logitech USB Receiver: YAxisMapping: buttons 4 and 5
    [ 38.842] (**) evdev: Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [ 38.842] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input1/event1"
    [ 38.842] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: MOUSE, id 10)
    [ 38.843] (II) evdev: Logitech USB Receiver: initialized for relative axes.
    [ 38.843] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
    [ 38.843] (**) Logitech USB Receiver: (accel) acceleration profile 0
    [ 38.843] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
    [ 38.843] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
    [ 38.844] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/mouse0)
    [ 38.844] (II) No input driver specified, ignoring this device.
    [ 38.844] (II) This device may have been added with another device file.
    [ 38.844] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event2)
    [ 38.844] (**) Logitech USB Receiver: Applying InputClass "evdev keyboard catchall"
    [ 38.844] (**) Logitech USB Receiver: Applying InputClass "Keyboard Defaults"
    [ 38.844] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
    [ 38.844] (**) Logitech USB Receiver: always reports core events
    [ 38.844] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event2"
    [ 38.844] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc521
    [ 38.844] (--) evdev: Logitech USB Receiver: Found 1 mouse buttons
    [ 38.844] (--) evdev: Logitech USB Receiver: Found scroll wheel(s)
    [ 38.845] (--) evdev: Logitech USB Receiver: Found relative axes
    [ 38.845] (II) evdev: Logitech USB Receiver: Forcing relative x/y axes to exist.
    [ 38.845] (--) evdev: Logitech USB Receiver: Found absolute axes
    [ 38.845] (II) evdev: Logitech USB Receiver: Forcing absolute x/y axes to exist.
    [ 38.845] (--) evdev: Logitech USB Receiver: Found keys
    [ 38.845] (II) evdev: Logitech USB Receiver: Configuring as mouse
    [ 38.845] (II) evdev: Logitech USB Receiver: Configuring as keyboard
    [ 38.845] (II) evdev: Logitech USB Receiver: Adding scrollwheel support
    [ 38.845] (**) evdev: Logitech USB Receiver: YAxisMapping: buttons 4 and 5
    [ 38.845] (**) evdev: Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [ 38.845] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.1/input/input2/event2"
    [ 38.845] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD, id 11)
    [ 38.845] (**) Option "xkb_rules" "evdev"
    [ 38.845] (**) Option "xkb_model" "evdev"
    [ 38.845] (**) Option "xkb_layout" "se"
    [ 38.845] (II) evdev: Logitech USB Receiver: initialized for relative axes.
    [ 38.845] (WW) evdev: Logitech USB Receiver: ignoring absolute axes.
    [ 38.846] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
    [ 38.846] (**) Logitech USB Receiver: (accel) acceleration profile 0
    [ 38.846] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
    [ 38.846] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
    [ 38.846] (II) config/udev: Adding input device USB 2.0 PC Camera (/dev/input/event10)
    [ 38.846] (**) USB 2.0 PC Camera: Applying InputClass "evdev keyboard catchall"
    [ 38.846] (**) USB 2.0 PC Camera: Applying InputClass "Keyboard Defaults"
    [ 38.846] (II) Using input driver 'evdev' for 'USB 2.0 PC Camera'
    [ 38.846] (**) USB 2.0 PC Camera: always reports core events
    [ 38.846] (**) evdev: USB 2.0 PC Camera: Device: "/dev/input/event10"
    [ 38.846] (--) evdev: USB 2.0 PC Camera: Vendor 0x1210 Product 0x25f4
    [ 38.846] (--) evdev: USB 2.0 PC Camera: Found keys
    [ 38.846] (II) evdev: USB 2.0 PC Camera: Configuring as keyboard
    [ 38.846] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input10/event10"
    [ 38.846] (II) XINPUT: Adding extended input device "USB 2.0 PC Camera" (type: KEYBOARD, id 12)
    [ 38.846] (**) Option "xkb_rules" "evdev"
    [ 38.846] (**) Option "xkb_model" "evdev"
    [ 38.847] (**) Option "xkb_layout" "se"
    [ 38.847] (II) config/udev: Adding input device HDA Intel Mic (/dev/input/event11)
    [ 38.847] (II) No input driver specified, ignoring this device.
    [ 38.847] (II) This device may have been added with another device file.
    [ 38.847] (II) config/udev: Adding input device HDA Intel Headphone (/dev/input/event12)
    [ 38.847] (II) No input driver specified, ignoring this device.
    [ 38.847] (II) This device may have been added with another device file.
    [ 38.847] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
    [ 38.847] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
    [ 38.847] (**) AT Translated Set 2 keyboard: Applying InputClass "Keyboard Defaults"
    [ 38.847] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
    [ 38.847] (**) AT Translated Set 2 keyboard: always reports core events
    [ 38.847] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
    [ 38.847] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
    [ 38.847] (--) evdev: AT Translated Set 2 keyboard: Found keys
    [ 38.847] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
    [ 38.848] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
    [ 38.848] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 13)
    [ 38.848] (**) Option "xkb_rules" "evdev"
    [ 38.848] (**) Option "xkb_model" "evdev"
    [ 38.848] (**) Option "xkb_layout" "se"
    [ 38.848] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event9)
    [ 38.848] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
    [ 38.848] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
    [ 38.848] (II) LoadModule: "synaptics"
    [ 38.848] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
    [ 38.911] (II) Module synaptics: vendor="X.Org Foundation"
    [ 38.911] compiled for 1.12.1, module version = 1.6.1
    [ 38.911] Module class: X.Org XInput Driver
    [ 38.911] ABI class: X.Org XInput driver, version 16.0
    [ 38.911] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
    [ 38.911] (**) SynPS/2 Synaptics TouchPad: always reports core events
    [ 38.911] (**) Option "Device" "/dev/input/event9"
    [ 38.911] (II) synaptics: SynPS/2 Synaptics TouchPad: ignoring touch events for semi-multitouch device
    [ 38.911] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5672
    [ 38.911] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4910
    [ 38.911] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
    [ 38.911] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
    [ 38.911] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple
    [ 38.911] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
    [ 38.911] (**) Option "TapButton1" "1"
    [ 38.911] (**) Option "TapButton2" "2"
    [ 38.911] (**) Option "TapButton3" "3"
    [ 38.912] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
    [ 38.912] (**) SynPS/2 Synaptics TouchPad: always reports core events
    [ 38.912] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input9/event9"
    [ 38.912] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 14)
    [ 38.912] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
    [ 38.912] (**) synaptics: SynPS/2 Synaptics TouchPad: MaxSpeed is now 1.75
    [ 38.912] (**) synaptics: SynPS/2 Synaptics TouchPad: AccelFactor is now 0.037
    [ 38.912] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
    [ 38.912] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
    [ 38.912] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
    [ 38.912] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
    [ 38.912] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
    [ 38.913] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse1)
    [ 38.913] (II) No input driver specified, ignoring this device.
    [ 38.913] (II) This device may have been added with another device file.
    [ 38.913] (II) config/udev: Adding input device PC Speaker (/dev/input/event8)
    [ 38.913] (II) No input driver specified, ignoring this device.
    [ 38.913] (II) This device may have been added with another device file.
    The /var/log/Xorg.0.log when using nv:
    [ 52.162]
    X.Org X Server 1.12.2
    Release Date: 2012-05-29
    [ 52.163] X Protocol Version 11, Revision 0
    [ 52.163] Build Operating System: Linux 3.0.32-1-lts x86_64
    [ 52.164] Current Operating System: Linux yggdrasil 3.3.8-1-ARCH #1 SMP PREEMPT Tue Jun 5 15:20:32 CEST 2012 x86_64
    [ 52.164] Kernel command line: root=/dev/mapper/root cryptdevice=/dev/sda2:root ro vga=773 quiet
    [ 52.165] Build Date: 30 May 2012 07:24:13PM
    [ 52.165]
    [ 52.165] Current version of pixman: 0.26.0
    [ 52.166] Before reporting problems, check http://wiki.x.org
    to make sure that you have the latest version.
    [ 52.166] Markers: (--) probed, (**) from config file, (==) default setting,
    (++) from command line, (!!) notice, (II) informational,
    (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [ 52.168] (==) Log file: "/var/log/Xorg.0.log", Time: Sat Jun 9 21:30:26 2012
    [ 52.168] (==) Using config file: "/etc/X11/xorg.conf"
    [ 52.168] (==) Using config directory: "/etc/X11/xorg.conf.d"
    [ 52.168] (==) No Layout section. Using the first Screen section.
    [ 52.168] (==) No screen section available. Using defaults.
    [ 52.168] (**) |-->Screen "Default Screen Section" (0)
    [ 52.168] (**) | |-->Monitor "<default monitor>"
    [ 52.168] (==) No device specified for screen "Default Screen Section".
    Using the first device section listed.
    [ 52.168] (**) | |-->Device "Device0"
    [ 52.168] (==) No monitor specified for screen "Default Screen Section".
    Using a default monitor configuration.
    [ 52.169] (==) Automatically adding devices
    [ 52.169] (==) Automatically enabling devices
    [ 52.169] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
    [ 52.169] Entry deleted from font path.
    [ 52.169] (==) FontPath set to:
    /usr/share/fonts/misc/,
    /usr/share/fonts/TTF/,
    /usr/share/fonts/Type1/,
    /usr/share/fonts/100dpi/,
    /usr/share/fonts/75dpi/
    [ 52.169] (==) ModulePath set to "/usr/lib/xorg/modules"
    [ 52.169] (II) The server relies on udev to provide the list of input devices.
    If no devices become available, reconfigure udev or disable AutoAddDevices.
    [ 52.169] (II) Loader magic: 0x7c58e0
    [ 52.169] (II) Module ABI versions:
    [ 52.169] X.Org ANSI C Emulation: 0.4
    [ 52.169] X.Org Video Driver: 12.0
    [ 52.169] X.Org XInput driver : 16.0
    [ 52.169] X.Org Server Extension : 6.0
    [ 52.169] (--) PCI:*(0:2:0:0) 10de:0a70:144d:c079 rev 162, Mem @ 0xdc000000/16777216, 0xe0000000/268435456, 0xde000000/33554432, I/O @ 0x00002000/128, BIOS @ 0x????????/524288
    [ 52.170] (II) Open ACPI successful (/var/run/acpid.socket)
    [ 52.170] (II) LoadModule: "extmod"
    [ 52.170] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
    [ 52.170] (II) Module extmod: vendor="X.Org Foundation"
    [ 52.170] compiled for 1.12.2, module version = 1.0.0
    [ 52.170] Module class: X.Org Server Extension
    [ 52.170] ABI class: X.Org Server Extension, version 6.0
    [ 52.170] (II) Loading extension MIT-SCREEN-SAVER
    [ 52.170] (II) Loading extension XFree86-VidModeExtension
    [ 52.170] (II) Loading extension XFree86-DGA
    [ 52.170] (II) Loading extension DPMS
    [ 52.170] (II) Loading extension XVideo
    [ 52.170] (II) Loading extension XVideo-MotionCompensation
    [ 52.170] (II) Loading extension X-Resource
    [ 52.170] (II) LoadModule: "dbe"
    [ 52.170] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
    [ 52.170] (II) Module dbe: vendor="X.Org Foundation"
    [ 52.170] compiled for 1.12.2, module version = 1.0.0
    [ 52.170] Module class: X.Org Server Extension
    [ 52.170] ABI class: X.Org Server Extension, version 6.0
    [ 52.170] (II) Loading extension DOUBLE-BUFFER
    [ 52.170] (II) LoadModule: "glx"
    [ 52.170] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
    [ 52.180] (II) Module glx: vendor="NVIDIA Corporation"
    [ 52.180] compiled for 4.0.2, module version = 1.0.0
    [ 52.180] Module class: X.Org Server Extension
    [ 52.180] (II) NVIDIA GLX Module 295.53 Fri May 11 23:49:08 PDT 2012
    [ 52.180] (II) Loading extension GLX
    [ 52.180] (II) LoadModule: "record"
    [ 52.180] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
    [ 52.180] (II) Module record: vendor="X.Org Foundation"
    [ 52.180] compiled for 1.12.2, module version = 1.13.0
    [ 52.180] Module class: X.Org Server Extension
    [ 52.180] ABI class: X.Org Server Extension, version 6.0
    [ 52.180] (II) Loading extension RECORD
    [ 52.180] (II) LoadModule: "dri"
    [ 52.180] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
    [ 52.180] (II) Module dri: vendor="X.Org Foundation"
    [ 52.180] compiled for 1.12.2, module version = 1.0.0
    [ 52.180] ABI class: X.Org Server Extension, version 6.0
    [ 52.180] (II) Loading extension XFree86-DRI
    [ 52.180] (II) LoadModule: "dri2"
    [ 52.180] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
    [ 52.181] (II) Module dri2: vendor="X.Org Foundation"
    [ 52.181] compiled for 1.12.2, module version = 1.2.0
    [ 52.181] ABI class: X.Org Server Extension, version 6.0
    [ 52.181] (II) Loading extension DRI2
    [ 52.181] (II) LoadModule: "nv"
    [ 52.181] (II) Loading /usr/lib/xorg/modules/drivers/nv_drv.so
    [ 52.181] (II) Module nv: vendor="X.Org Foundation"
    [ 52.181] compiled for 1.12.0.901, module version = 2.1.18
    [ 52.181] Module class: X.Org Video Driver
    [ 52.181] ABI class: X.Org Video Driver, version 12.0
    [ 52.181] (II) NV: driver for NVIDIA chipsets: RIVA 128, RIVA TNT, RIVA TNT2,
    Unknown TNT2, Vanta, RIVA TNT2 Ultra, RIVA TNT2 Model 64,
    Aladdin TNT2, GeForce 256, GeForce DDR, Quadro, GeForce2 MX/MX 400,
    GeForce2 MX 100/200, GeForce2 Go, Quadro2 MXR/EX/Go,
    GeForce2 Integrated GPU, GeForce2 GTS, GeForce2 Ti, GeForce2 Ultra,
    Quadro2 Pro, GeForce4 MX 460, GeForce4 MX 440, GeForce4 MX 420,
    GeForce4 MX 440-SE, GeForce4 440 Go, GeForce4 420 Go,
    GeForce4 420 Go 32M, GeForce4 460 Go, Quadro4 550 XGL,
    GeForce4 440 Go 64M, Quadro NVS, Quadro4 500 GoGL,
    GeForce4 410 Go 16M, GeForce4 MX 440 with AGP8X,
    GeForce4 MX 440SE with AGP8X, GeForce4 MX 420 with AGP8X,
    GeForce4 MX 4000, GeForce4 448 Go, GeForce4 488 Go, Quadro4 580 XGL,
    Quadro4 NVS 280 SD, Quadro4 380 XGL, Quadro NVS 50 PCI,
    GeForce4 448 Go, GeForce4 MX Integrated GPU, GeForce3,
    GeForce3 Ti 200, GeForce3 Ti 500, Quadro DCC, GeForce4 Ti 4600,
    GeForce4 Ti 4400, GeForce4 Ti 4200, Quadro4 900 XGL, Quadro4 750 XGL,
    Quadro4 700 XGL, GeForce4 Ti 4800, GeForce4 Ti 4200 with AGP8X,
    GeForce4 Ti 4800 SE, GeForce4 4200 Go, Quadro4 700 GoGL,
    Quadro4 980 XGL, Quadro4 780 XGL, GeForce FX 5800 Ultra,
    GeForce FX 5800, Quadro FX 2000, Quadro FX 1000,
    GeForce FX 5600 Ultra, GeForce FX 5600, GeForce FX 5600XT,
    GeForce FX Go5600, GeForce FX Go5650, Quadro FX Go700,
    GeForce FX 5200, GeForce FX 5200 Ultra, GeForce FX 5200,
    GeForce FX 5200LE, GeForce FX Go5200, GeForce FX Go5250,
    GeForce FX 5500, GeForce FX 5100, GeForce FX Go5200 32M/64M,
    Quadro NVS 55/280 PCI, Quadro FX 500/600 PCI,
    GeForce FX Go53xx Series, GeForce FX Go5100, GeForce FX 5900 Ultra,
    GeForce FX 5900, GeForce FX 5900XT, GeForce FX 5950 Ultra,
    GeForce FX 5900ZT, Quadro FX 3000, Quadro FX 700,
    GeForce FX 5700 Ultra, GeForce FX 5700, GeForce FX 5700LE,
    GeForce FX 5700VE, GeForce FX Go5700, GeForce FX Go5700,
    Quadro FX Go1000, Quadro FX 1100, GeForce 6800 Ultra, GeForce 6800,
    GeForce 6800 LE, GeForce 6800 XE, GeForce 6800 XT, GeForce 6800 GT,
    GeForce 6800 GT, GeForce 6800 GS, GeForce 6800 XT, Quadro FX 4000,
    GeForce 6800 GS, GeForce 6800, GeForce 6800 LE, GeForce 6800 XT,
    GeForce Go 6800, GeForce Go 6800 Ultra, Quadro FX Go1400,
    Quadro FX 3450/4000 SDI, Quadro FX 1400, GeForce 6600 GT,
    GeForce 6600, GeForce 6600 LE, GeForce 6600 VE, GeForce Go 6600,
    GeForce 6610 XL, GeForce Go 6600 TE/6200 TE, GeForce 6700 XL,
    GeForce Go 6600, GeForce Go 6600 GT, Quadro NVS 440, Quadro FX 550,
    Quadro FX 550, Quadro FX 540, GeForce 6200, GeForce 6500,
    GeForce 6200 TurboCache(TM), GeForce 6200SE TurboCache(TM),
    GeForce 6200 LE, GeForce Go 6200, Quadro NVS 285, GeForce Go 6400,
    GeForce Go 6200, GeForce Go 6400, GeForce 6250, GeForce 7100 GS,
    GeForce 6800, GeForce 6800 LE, GeForce 6800 GT, GeForce 6800 XT,
    GeForce 6200, GeForce 6200 A-LE, GeForce 7800 GTX, GeForce 7800 GTX,
    GeForce 7800 GT, GeForce 7800 GS, GeForce 7800 SLI, GeForce Go 7800,
    GeForce Go 7800 GTX, Quadro FX 4500, GeForce 7350 LE,
    GeForce 7300 LE, GeForce 7300 SE, GeForce Go 7200, GeForce Go 7300,
    GeForce Go 7400, GeForce Go 7400 GS, Quadro NVS 110M,
    Quadro NVS 120M, Quadro FX 350M, GeForce 7500 LE, Quadro FX 350,
    GeForce 7300 GS, GeForce 7650 GS, GeForce 7600 GT, GeForce 7600 GS,
    GeForce 7300 GT, GeForce 7600 LE, GeForce 7300 GT, GeForce Go 7700,
    GeForce Go 7600, GeForce Go 7600 GT, Quadro NVS 300M,
    GeForce Go 7900 SE, Quadro FX 550M, Quadro FX 560, GeForce 7900 GTX,
    GeForce 7900 GT, GeForce 7900 GS, GeForce 7950 GX2, GeForce 7950 GX2,
    GeForce 7950 GT, GeForce Go 7950 GTX, GeForce Go 7900 GS,
    GeForce Go 7900 GTX, Quadro FX 2500M, Quadro FX 1500M,
    Quadro FX 5500, Quadro FX 3500, Quadro FX 1500, Quadro FX 4500 X2,
    GeForce 6150, GeForce 6150 LE, GeForce 6100, GeForce Go 6150,
    Quadro NVS 210S / NVIDIA GeForce 6150LE, GeForce Go 6100,
    GeForce 6150SE, GeForce 6100 nForce 405, GeForce 6100 nForce 400,
    GeForce 6100 nForce 420, GeForce 7150M / nForce 630M,
    GeForce 7000M / nForce 610M, GeForce 7050 PV / nForce 630a,
    GeForce 7050 PV / nForce 630a, GeForce 7025 / nForce 630a,
    GeForce 8800 GTX, GeForce 8800 GTS, GeForce 8800 Ultra,
    Quadro FX 5600, Quadro FX 4600, GeForce 8600 GTS, GeForce 8600 GT,
    GeForce 8600 GT, GeForce 8600 GS, GeForce 8400 GS, GeForce 9500M GS,
    GeForce 8300 GS, GeForce 8600M GT, GeForce 9650M GS,
    GeForce 8700M GT, Quadro FX 370, Quadro NVS 320M, Quadro FX 570M,
    Quadro FX 1600M, Quadro FX 570, Quadro FX 1700, GeForce GT 330,
    GeForce 8400 SE, GeForce 8500 GT, GeForce 8400 GS, GeForce 8300 GS,
    GeForce 8400 GS, GeForce 8600M GS, GeForce 8400M GT,
    GeForce 8400M GS, GeForce 8400M G, Quadro NVS 140M, Quadro NVS 130M,
    Quadro NVS 135M, GeForce 9400 GT, Quadro FX 360M, GeForce 9300M G,
    Quadro NVS 290, GeForce GTX 295, GeForce GTX 280, GeForce GTX 260,
    GeForce GTX 285, GeForce GTX 275, GeForce GTX 260, GeForce GTX 295,
    Quadroplex 2200 D2, Quadroplex 2200 S4, Quadro CX, Quadro FX 5800,
    Quadro FX 4800, Quadro FX 3800, GeForce 8800 GTS 512,
    GeForce 9800 GT, GeForce 8800 GT, GeForce GT 230, GeForce 9800 GX2,
    GeForce 9800 GT, GeForce 8800 GS, GeForce GTS 240, GeForce 9800M GTX,
    GeForce 8800M GTS, GeForce GTX 280M, GeForce 9800M GT,
    GeForce 8800M GTX, GeForce 8800 GS, GeForce GTX 285M,
    GeForce 9600 GSO, GeForce 8800 GT, GeForce 9800 GTX/9800 GTX+,
    GeForce 9800 GTX+, GeForce 9800 GT, GeForce GTS 250,
    GeForce 9800M GTX, GeForce GTX 260M, Quadro FX 4700 X2,
    Quadro FX 3700, Quadro VX 200, Quadro FX 3600M, Quadro FX 2800M,
    Quadro FX 3700M, Quadro FX 3800M, GeForce 9600 GT, GeForce 9600 GS,
    GeForce 9600 GSO 512, GeForce GT 130, GeForce GT 140,
    GeForce 9800M GTS, GeForce 9700M GTS, GeForce 9800M GS,
    GeForce 9800M GTS, GeForce 9600 GT, GeForce 9600 GT,
    GeForce GTS 160M, GeForce GTS 150M, GeForce 9600 GSO,
    GeForce 9600 GT, Quadro FX 1800, Quadro FX 2700M, GeForce 9500 GT,
    GeForce 9400 GT, GeForce 9500 GT, GeForce 9500 GS, GeForce 9500 GS,
    GeForce GT 120, GeForce 9600M GT, GeForce 9600M GS, GeForce 9600M GT,
    GeForce 9700M GT, GeForce 9500M G, GeForce 9650M GT, GeForce G 110M,
    GeForce GT 130M, GeForce GT 120M, GeForce GT 220M, GeForce 9650 S,
    Quadro FX 380, Quadro FX 580, Quadro FX 1700M, GeForce 9400 GT,
    Quadro FX 770M, GeForce 9300 GE, GeForce 9300 GS, GeForce 8400,
    GeForce 8400 SE, GeForce 8400 GS, GeForce 9300M GS, GeForce G100,
    GeForce 9300 SE, GeForce 9200M GS, GeForce 9300M GS, Quadro NVS 150M,
    Quadro NVS 160M, GeForce G 105M, GeForce G 103M, GeForce G105M,
    Quadro NVS 420, Quadro FX 370 LP, Quadro NVS 450, Quadro FX 370M,
    Quadro NVS 295, GeForce 9100M G, GeForce 8200M G, GeForce 9200,
    GeForce 9100, GeForce 8300, GeForce 8200, nForce 730a, GeForce 9200,
    nForce 980a/780a SLI, nForce 750a SLI, GeForce 8100 / nForce 720a,
    GeForce 9400, GeForce 9400, GeForce 9400M G, GeForce 9400M,
    GeForce 9300, ION, GeForce 9400M G, GeForce 9400, nForce 760i SLI,
    GeForce 9400, GeForce 9300 / nForce 730i, GeForce 9200,
    GeForce 9100M G, GeForce 8200M G, GeForce 9400M, GeForce 9200,
    GeForce G102M, GeForce G102M, ION, ION, GeForce 9400, ION, ION LE,
    ION LE, GeForce GT 220, GeForce 315, GeForce 210, GeForce GT 230M,
    GeForce GT 330M, GeForce GT 230M, GeForce GT 330M, NVS 5100M,
    GeForce GT 320M, GeForce GT 240M, GeForce GT 325M, Quadro FX 880M,
    GeForce G210, GeForce 205, GeForce 310, ION, GeForce 210,
    GeForce 310, GeForce 315, GeForce G105M, GeForce G105M, NVS 2100M,
    NVS 3100M, GeForce 305M, ION, GeForce 310M, GeForce 305M,
    GeForce 310M, GeForce 305M, GeForce G210M, GeForce 310M,
    Quadro FX 380 LP, Quadro FX 380M, GeForce GT 330, GeForce GT 320,
    GeForce GT 240, GeForce GT 340, GeForce GT 330, GeForce GTS 260M,
    GeForce GTS 250M, GeForce 315, GeForce GT 335M, GeForce GTS 350M,
    GeForce GTS 360M, Quadro FX 1800M
    [ 52.183] (--) using VT number 7
    [ 52.211] (--) NV: Found NVIDIA GeForce 310M at 02@00:00:0
    [ 52.211] (II) Loading sub module "int10"
    [ 52.211] (II) LoadModule: "int10"
    [ 52.211] (II) Loading /usr/lib/xorg/modules/libint10.so
    [ 52.233] (II) Module int10: vendor="X.Org Foundation"
    [ 52.233] compiled for 1.12.2, module version = 1.0.0
    [ 52.233] ABI class: X.Org Video Driver, version 12.0
    [ 52.233] (II) NV(0): Initializing int10
    [ 52.234] (II) NV(0): Bad V_BIOS checksum
    [ 52.234] (II) NV(0): Primary V_BIOS segment is: 0xc000
    [ 52.234] (--) NV(0): Console is VGA mode 0x105
    [ 52.234] (II) NV(0): Creating default Display subsection in Screen section
    "Default Screen Section" for depth/fbbpp 24/32
    [ 52.234] (==) NV(0): Depth 24, (--) framebuffer bpp 32
    [ 52.234] (==) NV(0): RGB weight 888
    [ 52.234] (==) NV(0): Default visual is TrueColor
    [ 52.235] (==) NV(0): Using hardware cursor
    [ 52.235] (==) NV(0): Using gamma correction (1.0, 1.0, 1.0)
    [ 52.245] (II) NV(0): MMIO registers mapped at 0x7f5b4a0aa000
    [ 52.245] (--) NV(0): Total video RAM: 512.0 MB
    [ 52.245] (--) NV(0): BAR1 size: 256.0 MB
    [ 52.245] (--) NV(0): Mapped memory: 256.0 MB
    [ 52.317] (II) NV(0): Linear framebuffer mapped at 0x7f5b3a0aa000
    [ 52.317] (II) Loading sub module "i2c"
    [ 52.317] (II) LoadModule: "i2c"
    [ 52.317] (II) Module "i2c" already built-in
    [ 52.317] (II) Loading sub module "ddc"
    [ 52.317] (II) LoadModule: "ddc"
    [ 52.317] (II) Module "ddc" already built-in
    [ 52.317] (--) NV(0): Connector map:
    [ 52.317] (--) NV(0): Bus 3 -> SOR0 (LVDS)
    [ 52.317] (--) NV(0): Bus 0 -> DAC1
    [ 52.317] (--) NV(0): Bus 8 -> SOR3
    [ 52.317] (--) NV(0): Load detection: 340
    [ 52.317] (II) NV(0): I2C bus "I2C0" initialized.
    [ 52.317] (II) NV(0): Output VGA1 has no monitor section
    [ 52.317] (II) NV(0): I2C bus "I2C8" initialized.
    [ 52.317] (II) NV(0): Output DVI3 has no monitor section
    [ 52.317] (II) NV(0): LVDS native size 1366x768
    [ 52.317] (II) NV(0): Output LVDS has no monitor section
    [ 52.317] (II) NV(0): I2C bus "I2C3 (LVDS)" initialized.
    [ 52.317] (II) NV(0): Probing for EDID on I2C bus 0...
    [ 52.317] (II) NV(0): I2C device "I2C0:ddc2" registered at address 0xA0.
    [ 52.321] (II) NV(0): ... none found
    [ 52.321] (--) NV(0): Trying load detection on VGA1 ... nothing.
    [ 52.366] (II) NV(0): EDID for output VGA1
    [ 52.366] (II) NV(0): Probing for EDID on I2C bus 8...
    [ 52.366] (II) NV(0): I2C device "I2C8:ddc2" registered at address 0xA0.
    [ 52.370] (II) NV(0): ... none found
    [ 52.370] (II) NV(0): EDID for output DVI3
    [ 52.370] (II) NV(0): Probing for EDID on I2C bus 3...
    [ 52.370] (II) NV(0): I2C device "I2C3 (LVDS):ddc2" registered at address 0xA0.
    [ 52.422] (--) NV(0): DDC detected a DFP:
    [ 52.422] (II) NV(0): Manufacturer: CMO Model: 1680 Serial#: 0
    [ 52.422] (II) NV(0): Year: 2009 Week: 4
    [ 52.422] (II) NV(0): EDID Version: 1.3
    [ 52.422] (II) NV(0): Digital Display Input
    [ 52.422] (II) NV(0): Max Image Size [cm]: horiz.: 35 vert.: 19
    [ 52.422] (II) NV(0): Gamma: 2.20
    [ 52.422] (II) NV(0): No DPMS capabilities specified
    [ 52.422] (II) NV(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
    [ 52.422] (II) NV(0): First detailed timing is preferred mode
    [ 52.422] (II) NV(0): redX: 0.602 redY: 0.340 greenX: 0.306 greenY: 0.530
    [ 52.422] (II) NV(0): blueX: 0.151 blueY: 0.120 whiteX: 0.313 whiteY: 0.329
    [ 52.422] (II) NV(0): Manufacturer's mask: 0
    [ 52.422] (II) NV(0): Supported detailed timing:
    [ 52.422] (II) NV(0): clock: 75.5 MHz Image Size: 344 x 193 mm
    [ 52.422] (II) NV(0): h_active: 1366 h_sync: 1397 h_sync_end 1462 h_blank_end 1560 h_border: 0
    [ 52.422] (II) NV(0): v_active: 768 v_sync: 772 v_sync_end 784 v_blanking: 806 v_border: 0
    [ 52.422] (II) NV(0): N156B6-L06
    [ 52.422] (II) NV(0): CMO
    [ 52.422] (II) NV(0): N156B6-L06
    [ 52.422] (II) NV(0): EDID (in hex):
    [ 52.422] (II) NV(0): 00ffffffffffff000daf801600000000
    [ 52.422] (II) NV(0): 04130103802313780a07f59a574e8726
    [ 52.422] (II) NV(0): 1e505400000001010101010101010101
    [ 52.422] (II) NV(0): 0101010101017e1d56c2500026301f41
    [ 52.422] (II) NV(0): 4c0058c110000018000000fe004e3135
    [ 52.422] (II) NV(0): 3642362d4c30360a2020000000fe0043
    [ 52.422] (II) NV(0): 4d4f0a202020202020202020000000fe
    [ 52.422] (II) NV(0): 004e31353642362d4c30360a20200048
    [ 52.422] (II) NV(0): EDID for output LVDS
    [ 52.422] (II) NV(0): Manufacturer: CMO Model: 1680 Serial#: 0
    [ 52.422] (II) NV(0): Year: 2009 Week: 4
    [ 52.422] (II) NV(0): EDID Version: 1.3
    [ 52.422] (II) NV(0): Digital Display Input
    [ 52.422] (II) NV(0): Max Image Size [cm]: horiz.: 35 vert.: 19
    [ 52.422] (II) NV(0): Gamma: 2.20
    [ 52.422] (II) NV(0): No DPMS capabilities specified
    [ 52.422] (II) NV(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
    [ 52.422] (II) NV(0): First detailed timing is preferred mode
    [ 52.422] (II) NV(0): redX: 0.602 redY: 0.340 greenX: 0.306 greenY: 0.530
    [ 52.422] (II) NV(0): blueX: 0.151 blueY: 0.120 whiteX: 0.313 whiteY: 0.329
    [ 52.422] (II) NV(0): Manufacturer's mask: 0
    [ 52.422] (II) NV(0): Supported detailed timing:
    [ 52.422] (II) NV(0): clock: 75.5 MHz Image Size: 344 x 193 mm
    [ 52.422] (II) NV(0): h_active: 1366 h_sync: 1397 h_sync_end 1462 h_blank_end 1560 h_border: 0
    [ 52.422] (II) NV(0): v_active: 768 v_sync: 772 v_sync_end 784 v_blanking: 806 v_border: 0
    [ 52.422] (II) NV(0): N156B6-L06
    [ 52.422] (II) NV(0): CMO
    [ 52.422] (II) NV(0): N156B6-L06
    [ 52.422] (II) NV(0): EDID (in hex):
    [ 52.422] (II) NV(0): 00ffffffffffff000daf801600000000
    [ 52.422] (II) NV(0): 04130103802313780a07f59a574e8726
    [ 52.422] (II) NV(0): 1e505400000001010101010101010101
    [ 52.422] (II) NV(0): 0101010101017e1d56c2500026301f41
    [ 52.422] (II) NV(0): 4c0058c110000018000000fe004e3135
    [ 52.422] (II) NV(0): 3642362d4c30360a2020000000fe0043
    [ 52.422] (II) NV(0): 4d4f0a202020202020202020000000fe
    [ 52.422] (II) NV(0): 004e31353642362d4c30360a20200048
    [ 52.422] (II) NV(0): EDID vendor "CMO", prod id 5760
    [ 52.422] (II) NV(0): Printing probed modes for output LVDS
    [ 52.422] (II) NV(0): Modeline "1366x768"x60.0 75.50 1366 1397 1462 1560 768 772 784 806 -hsync -vsync (48.4 kHz eP)
    [ 52.422] (II) NV(0): Output VGA1 disconnected
    [ 52.422] (II) NV(0): Output DVI3 disconnected
    [ 52.422] (II) NV(0): Output LVDS connected
    [ 52.422] (II) NV(0): Using exact sizes for initial modes
    [ 52.422] (II) NV(0): Output LVDS using initial mode 1366x768
    [ 52.422] (II) NV(0): Using default gamma of (1.0, 1.0, 1.0) unless otherwise stated.
    [ 52.422] (--) NV(0): Virtual size is 1366x1366 (pitch 1536)
    [ 52.422] (**) NV(0): Driver mode "1366x768": 75.5 MHz (scaled from 0.0 MHz), 48.4 kHz, 60.0 Hz
    [ 52.422] (II) NV(0): Modeline "1366x768"x60.0 75.50 1366 1397 1462 1560 768 772 784 806 -hsync -vsync (48.4 kHz eP)
    [ 52.422] (==) NV(0): DPI set to (96, 96)
    [ 52.422] (II) Loading sub module "fb"
    [ 52.422] (II) LoadModule: "fb"
    [ 52.433] (II) Loading /usr/lib/xorg/modules/libfb.so
    [ 52.447] (II) Module fb: vendor="X.Org Foundation"
    [ 52.447] compiled for 1.12.2, module version = 1.0.0
    [ 52.447] ABI class: X.Org ANSI C Emulation, version 0.4
    [ 52.447] (II) Loading sub module "xaa"
    [ 52.447] (II) LoadModule: "xaa"
    [ 52.447] (II) Loading /usr/lib/xorg/modules/libxaa.so
    [ 52.458] (II) Module xaa: vendor="X.Org Foundation"
    [ 52.458] compiled for 1.12.2, module version = 1.2.1
    [ 52.458] ABI class: X.Org Video Driver, version 12.0
    [ 52.458] (II) Loading sub module "ramdac"
    [ 52.458] (II) LoadModule: "ramdac"
    [ 52.458] (II) Module "ramdac" already built-in
    [ 52.458] (--) Depth 24 pixmap format is 32 bpp
    [ 52.475] (--) NV(0): 183.99 MB available for offscreen pixmaps
    [ 52.507] (II) NV(0): Using XFree86 Acceleration Architecture (XAA)
    [ 52.507] Screen to screen bit blits
    [ 52.507] Solid filled rectangles
    [ 52.507] 8x8 mono pattern filled rectangles
    [ 52.507] Indirect CPU to Screen color expansion
    [ 52.507] Solid Lines
    [ 52.507] Scanline Image Writes
    [ 52.508] Setting up tile and stipple cache:
    [ 52.508] 32 128x128 slots
    [ 52.508] 32 256x256 slots
    [ 52.508] 16 512x512 slots
    [ 52.508] (==) NV(0): Backing store disabled
    [ 52.508] (==) NV(0): Silken mouse enabled
    [ 52.508] (II) NV(0): RandR 1.2 enabled, ignore the following RandR disabled message.
    [ 52.508] (==) NV(0): DPMS enabled
    [ 55.081] (--) RandR disabled
    [ 55.081] (II) Initializing built-in extension Generic Event Extension
    [ 55.081] (II) Initializing built-in extension SHAPE
    [ 55.081] (II) Initializing built-in extension MIT-SHM
    [ 55.081] (II) Initializing built-in extension XInputExtension
    [ 55.081] (II) Initializing built-in extension XTEST
    [ 55.081] (II) Initializing built-in extension BIG-REQUESTS
    [ 55.081] (II) Initializing built-in extension SYNC
    [ 55.081] (II) Initializing built-in extension XKEYBOARD
    [ 55.081] (II) Initializing built-in extension XC-MISC
    [ 55.081] (II) Initializing built-in extension SECURITY
    [ 55.081] (II) Initializing built-in extension XINERAMA
    [ 55.081] (II) Initializing built-in extension XFIXES
    [ 55.081] (II) Initializing built-in extension RENDER
    [ 55.081] (II) Initializing built-in extension RANDR
    [ 55.081] (II) Initializing built-in extension COMPOSITE
    [ 55.081] (II) Initializing built-in extension DAMAGE
    [ 55.103] (EE) Failed to initialize GLX extension (Compatible NVIDIA X driver not found)
    [ 55.132] (II) NV(0): Setting screen physical size to 361 x 203
    [ 55.715] (II) config/udev: Adding input device Power Button (/dev/input/event6)
    [ 55.715] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 55.715] (**) Power Button: Applying InputClass "Keyboard Defaults"
    [ 55.715] (II) LoadModule: "evdev"
    [ 55.715] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
    [ 55.725] (II) Module evdev: vendor="X.Org Foundation"
    [ 55.725] compiled for 1.12.0, module version = 2.7.0
    [ 55.725] Module class: X.Org XInput Driver
    [ 55.725] ABI class: X.Org XInput driver, version 16.0
    [ 55.725] (II) Using input driver 'evdev' for 'Power Button'
    [ 55.725] (**) Power Button: always reports core events
    [ 55.725] (**) evdev: Power Button: Device: "/dev/input/event6"
    [ 55.725] (--) evdev: Power Button: Vendor 0 Product 0x1
    [ 55.725] (--) evdev: Power Button: Found keys
    [ 55.725] (II) evdev: Power Button: Configuring as keyboard
    [ 55.725] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input6/event6"
    [ 55.725] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
    [ 55.725] (**) Option "xkb_rules" "evdev"
    [ 55.725] (**) Option "xkb_model" "evdev"
    [ 55.725] (**) Option "xkb_layout" "se"
    [ 55.918] (II) config/udev: Adding input device Video Bus (/dev/input/event7)
    [ 55.918] (**) Video Bus: Applying InputClass "evdev keyboard catchall"
    [ 55.918] (**) Video Bus: Applying InputClass "Keyboard Defaults"
    [ 55.918] (II) Using input driver 'evdev' for 'Video Bus'
    [ 55.918] (**) Video Bus: always reports core events
    [ 55.918] (**) evdev: Video Bus: Device: "/dev/input/event7"
    [ 55.918] (--) evdev: Video Bus: Vendor 0 Product 0x6
    [ 55.918] (--) evdev: Video Bus: Found keys
    [ 55.918] (II) evdev: Video Bus: Configuring as keyboard
    [ 55.918] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0A08:00/device:01/LNXVIDEO:00/input/input7/event7"
    [ 55.918] (II) XINPUT: Adding extended input device "Video Bus" (type: KEYBOARD, id 7)
    [ 55.918] (**) Option "xkb_rules" "evdev"
    [ 55.918] (**) Option "xkb_model" "evdev"
    [ 55.918] (**) Option "xkb_layout" "se"
    [ 55.919] (II) config/udev: Adding input device Power Button (/dev/input/event4)
    [ 55.919] (**) Power Button: Applying InputClass "evdev keyboard catchall"
    [ 55.919] (**) Power Button: Applying InputClass "Keyboard Defaults"
    [ 55.919] (II) Using input driver 'evdev' for 'Power Button'
    [ 55.919] (**) Power Button: always reports core events
    [ 55.919] (**) evdev: Power Button: Device: "/dev/input/event4"
    [ 55.919] (--) evdev: Power Button: Vendor 0 Product 0x1
    [ 55.919] (--) evdev: Power Button: Found keys
    [ 55.919] (II) evdev: Power Button: Configuring as keyboard
    [ 55.919] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input4/event4"
    [ 55.919] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 8)
    [ 55.919] (**) Option "xkb_rules" "evdev"
    [ 55.919] (**) Option "xkb_model" "evdev"
    [ 55.919] (**) Option "xkb_layout" "se"
    [ 55.920] (II) config/udev: Adding input device Lid Switch (/dev/input/event3)
    [ 55.920] (II) No input driver specified, ignoring this device.
    [ 55.920] (II) This device may have been added with another device file.
    [ 55.921] (II) config/udev: Adding input device Sleep Button (/dev/input/event5)
    [ 55.921] (**) Sleep Button: Applying InputClass "evdev keyboard catchall"
    [ 55.921] (**) Sleep Button: Applying InputClass "Keyboard Defaults"
    [ 55.921] (II) Using input driver 'evdev' for 'Sleep Button'
    [ 55.921] (**) Sleep Button: always reports core events
    [ 55.921] (**) evdev: Sleep Button: Device: "/dev/input/event5"
    [ 55.921] (--) evdev: Sleep Button: Vendor 0 Product 0x3
    [ 55.921] (--) evdev: Sleep Button: Found keys
    [ 55.921] (II) evdev: Sleep Button: Configuring as keyboard
    [ 55.921] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0E:00/input/input5/event5"
    [ 55.921] (II) XINPUT: Adding extended input device "Sleep Button" (type: KEYBOARD, id 9)
    [ 55.921] (**) Option "xkb_rules" "evdev"
    [ 55.921] (**) Option "xkb_model" "evdev"
    [ 55.921] (**) Option "xkb_layout" "se"
    [ 55.922] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=9 (/dev/input/event13)
    [ 55.922] (II) No input driver specified, ignoring this device.
    [ 55.922] (II) This device may have been added with another device file.
    [ 55.923] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=8 (/dev/input/event14)
    [ 55.923] (II) No input driver specified, ignoring this device.
    [ 55.923] (II) This device may have been added with another device file.
    [ 55.923] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=7 (/dev/input/event15)
    [ 55.923] (II) No input driver specified, ignoring this device.
    [ 55.923] (II) This device may have been added with another device file.
    [ 55.924] (II) config/udev: Adding input device HDA NVidia HDMI/DP,pcm=3 (/dev/input/event16)
    [ 55.924] (II) No input driver specified, ignoring this device.
    [ 55.924] (II) This device may have been added with another device file.
    [ 55.924] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event1)
    [ 55.924] (**) Logitech USB Receiver: Applying InputClass "evdev pointer catchall"
    [ 55.924] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
    [ 55.924] (**) Logitech USB Receiver: always reports core events
    [ 55.924] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event1"
    [ 55.925] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc521
    [ 55.925] (--) evdev: Logitech USB Receiver: Found 20 mouse buttons
    [ 55.925] (--) evdev: Logitech USB Receiver: Found scroll wheel(s)
    [ 55.925] (--) evdev: Logitech USB Receiver: Found relative axes
    [ 55.925] (--) evdev: Logitech USB Receiver: Found x and y relative axes
    [ 55.925] (II) evdev: Logitech USB Receiver: Configuring as mouse
    [ 55.925] (II) evdev: Logitech USB Receiver: Adding scrollwheel support
    [ 55.925] (**) evdev: Logitech USB Receiver: YAxisMapping: buttons 4 and 5
    [ 55.925] (**) evdev: Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [ 55.925] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.0/input/input1/event1"
    [ 55.925] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: MOUSE, id 10)
    [ 55.925] (II) evdev: Logitech USB Receiver: initialized for relative axes.
    [ 55.925] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
    [ 55.925] (**) Logitech USB Receiver: (accel) acceleration profile 0
    [ 55.925] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
    [ 55.925] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
    [ 55.926] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/mouse0)
    [ 55.926] (II) No input driver specified, ignoring this device.
    [ 55.926] (II) This device may have been added with another device file.
    [ 55.926] (II) config/udev: Adding input device Logitech USB Receiver (/dev/input/event2)
    [ 55.927] (**) Logitech USB Receiver: Applying InputClass "evdev keyboard catchall"
    [ 55.927] (**) Logitech USB Receiver: Applying InputClass "Keyboard Defaults"
    [ 55.927] (II) Using input driver 'evdev' for 'Logitech USB Receiver'
    [ 55.927] (**) Logitech USB Receiver: always reports core events
    [ 55.927] (**) evdev: Logitech USB Receiver: Device: "/dev/input/event2"
    [ 55.927] (--) evdev: Logitech USB Receiver: Vendor 0x46d Product 0xc521
    [ 55.927] (--) evdev: Logitech USB Receiver: Found 1 mouse buttons
    [ 55.927] (--) evdev: Logitech USB Receiver: Found scroll wheel(s)
    [ 55.927] (--) evdev: Logitech USB Receiver: Found relative axes
    [ 55.927] (II) evdev: Logitech USB Receiver: Forcing relative x/y axes to exist.
    [ 55.927] (--) evdev: Logitech USB Receiver: Found absolute axes
    [ 55.927] (II) evdev: Logitech USB Receiver: Forcing absolute x/y axes to exist.
    [ 55.927] (--) evdev: Logitech USB Receiver: Found keys
    [ 55.927] (II) evdev: Logitech USB Receiver: Configuring as mouse
    [ 55.927] (II) evdev: Logitech USB Receiver: Configuring as keyboard
    [ 55.927] (II) evdev: Logitech USB Receiver: Adding scrollwheel support
    [ 55.927] (**) evdev: Logitech USB Receiver: YAxisMapping: buttons 4 and 5
    [ 55.927] (**) evdev: Logitech USB Receiver: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
    [ 55.927] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.1/input/input2/event2"
    [ 55.927] (II) XINPUT: Adding extended input device "Logitech USB Receiver" (type: KEYBOARD, id 11)
    [ 55.927] (**) Option "xkb_rules" "evdev"
    [ 55.927] (**) Option "xkb_model" "evdev"
    [ 55.927] (**) Option "xkb_layout" "se"
    [ 55.927] (II) evdev: Logitech USB Receiver: initialized for relative axes.
    [ 55.927] (WW) evdev: Logitech USB Receiver: ignoring absolute axes.
    [ 55.927] (**) Logitech USB Receiver: (accel) keeping acceleration scheme 1
    [ 55.927] (**) Logitech USB Receiver: (accel) acceleration profile 0
    [ 55.927] (**) Logitech USB Receiver: (accel) acceleration factor: 2.000
    [ 55.927] (**) Logitech USB Receiver: (accel) acceleration threshold: 4
    [ 55.927] (II) config/udev: Adding input device USB 2.0 PC Camera (/dev/input/event10)
    [ 55.927] (**) USB 2.0 PC Camera: Applying InputClass "evdev keyboard catchall"
    [ 55.927] (**) USB 2.0 PC Camera: Applying InputClass "Keyboard Defaults"
    [ 55.927] (II) Using input driver 'evdev' for 'USB 2.0 PC Camera'
    [ 55.927] (**) USB 2.0 PC Camera: always reports core events
    [ 55.927] (**) evdev: USB 2.0 PC Camera: Device: "/dev/input/event10"
    [ 55.927] (--) evdev: USB 2.0 PC Camera: Vendor 0x1210 Product 0x25f4
    [ 55.927] (--) evdev: USB 2.0 PC Camera: Found keys
    [ 55.927] (II) evdev: USB 2.0 PC Camera: Configuring as keyboard
    [ 55.927] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.4/1-1.4:1.0/input/input10/event10"
    [ 55.927] (II) XINPUT: Adding extended input device "USB 2.0 PC Camera" (type: KEYBOARD, id 12)
    [ 55.927] (**) Option "xkb_rules" "evdev"
    [ 55.927] (**) Option "xkb_model" "evdev"
    [ 55.927] (**) Option "xkb_layout" "se"
    [ 55.928] (II) config/udev: Adding input device HDA Intel Mic (/dev/input/event11)
    [ 55.928] (II) No input driver specified, ignoring this device.
    [ 55.928] (II) This device may have been added with another device file.
    [ 55.928] (II) config/udev: Adding input device HDA Intel Headphone (/dev/input/event12)
    [ 55.928] (II) No input driver specified, ignoring this device.
    [ 55.928] (II) This device may have been added with another device file.
    [ 55.928] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event0)
    [ 55.928] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
    [ 55.928] (**) AT Translated Set 2 keyboard: Applying InputClass "Keyboard Defaults"
    [ 55.928] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
    [ 55.928] (**) AT Translated Set 2 keyboard: always reports core events
    [ 55.928] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event0"
    [ 55.928] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
    [ 55.928] (--) evdev: AT Translated Set 2 keyboard: Found keys
    [ 55.928] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
    [ 55.929] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input0/event0"
    [ 55.929] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 13)
    [ 55.929] (**) Option "xkb_rules" "evdev"
    [ 55.929] (**) Option "xkb_model" "evdev"
    [ 55.929] (**) Option "xkb_layout" "se"
    [ 55.929] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/event9)
    [ 55.929] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "evdev touchpad catchall"
    [ 55.929] (**) SynPS/2 Synaptics TouchPad: Applying InputClass "touchpad catchall"
    [ 55.929] (II) LoadModule: "synaptics"
    [ 55.929] (II) Loading /usr/lib/xorg/modules/input/synaptics_drv.so
    [ 55.967] (II) Module synaptics: vendor="X.Org Foundation"
    [ 55.967] compiled for 1.12.1, module version = 1.6.1
    [ 55.967] Module class: X.Org XInput Driver
    [ 55.967] ABI class: X.Org XInput driver, version 16.0
    [ 55.967] (II) Using input driver 'synaptics' for 'SynPS/2 Synaptics TouchPad'
    [ 55.967] (**) SynPS/2 Synaptics TouchPad: always reports core events
    [ 55.967] (**) Option "Device" "/dev/input/event9"
    [ 55.967] (II) synaptics: SynPS/2 Synaptics TouchPad: ignoring touch events for semi-multitouch device
    [ 55.967] (--) synaptics: SynPS/2 Synaptics TouchPad: x-axis range 1472 - 5672
    [ 55.967] (--) synaptics: SynPS/2 Synaptics TouchPad: y-axis range 1408 - 4910
    [ 55.967] (--) synaptics: SynPS/2 Synaptics TouchPad: pressure range 0 - 255
    [ 55.967] (--) synaptics: SynPS/2 Synaptics TouchPad: finger width range 0 - 15
    [ 55.968] (--) synaptics: SynPS/2 Synaptics TouchPad: buttons: left right double triple
    [ 55.968] (--) synaptics: SynPS/2 Synaptics TouchPad: Vendor 0x2 Product 0x7
    [ 55.968] (**) Option "TapButton1" "1"
    [ 55.968] (**) Option "TapButton2" "2"
    [ 55.968] (**) Option "TapButton3" "3"
    [ 55.968] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
    [ 55.968] (**) SynPS/2 Synaptics TouchPad: always reports core events
    [ 55.968] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input9/event9"
    [ 55.968] (II) XINPUT: Adding extended input device "SynPS/2 Synaptics TouchPad" (type: TOUCHPAD, id 14)
    [ 55.968] (**) synaptics: SynPS/2 Synaptics TouchPad: (accel) MinSpeed is now constant deceleration 2.5
    [ 55.968] (**) synaptics: SynPS/2 Synaptics TouchPad: MaxSpeed is now 1.75
    [ 55.968] (**) synaptics: SynPS/2 Synaptics TouchPad: AccelFactor is now 0.037
    [ 55.969] (**) SynPS/2 Synaptics TouchPad: (accel) keeping acceleration scheme 1
    [ 55.969] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration profile 1
    [ 55.969] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration factor: 2.000
    [ 55.969] (**) SynPS/2 Synaptics TouchPad: (accel) acceleration threshold: 4
    [ 55.969] (--) synaptics: SynPS/2 Synaptics TouchPad: touchpad found
    [ 55.969] (II) config/udev: Adding input device SynPS/2 Synaptics TouchPad (/dev/input/mouse1)
    [ 55.969] (II) No input driver specified, ignoring this device.
    [ 55.969] (II) This device may have been added with another device file.
    [ 55.970] (II) config/udev: Adding input device PC Speaker (/dev/input/event8)
    [ 55.970] (II) No input driver specified, ignoring this device.
    [ 55.970] (II) This device may have been added with another device file.
    From what I can tell it is something with the nvidia driver that doesn't play well with xorg.  Perhaps some kind of autodetection that takes long time to finish. Anyone got any ideas how to solve this?
    Last edited by Larsson (2012-06-13 18:59:43)

    Didn't see they where timestamps . Yes it seems that glx is one cause of the delay. I've tried some different xorg.conf, and it's always ligglx.so or  NV-GLX that slows it down. Any suggestions on how I can speed this up?
    ps. The computer is ok. Although the garddrive is a SATA 3.0Gb/s, 5400 RPM.  But I don't think this is the problem?

  • Need advice on graffics card upgrade for use of CS6 Mercury Playback in PR & AE w/ dell xps 9100

    I am curretly running CS6 on my dell xps 9100
    Windows 7 64bit
    12GB Ram
    2TB HD + 0 Rate 2TB External Drive (x2)
    Intel Core i7 930 operating at 2.8 gigahertz with an 8-megabyte cache.
      Memory and Storage  
    The Studio XPS 9100 can be equipped with up to 24 gigabytes of RAM. It uses Tri-Channel DDR3 SDRAM operating at 1333 megahertz. The computer has six DIMMs into which RAM can be plugged. The Studio XPS 9100 may have a hard disk size of up to 2000 gigabytes using SATA drives operating at 7200 rpm.
    Video
    ATI Radeon HD5870 with 1024 megabytes of RAM
      Expansion and Networking  
    The Studio XPS 9100 has one PCI slot, three PCIe x1 slots, one PCIe x8 slot and one PCIe X16 slot. It has four USB 2.0 ports, a 15-in-1 card reader, a headphone port and a microphone port on the front panel. The rear ports into an IEEE 1394a port, surround-sound audio ports, four USB 2.0 ports, one eSATA port, an S/PDIF port and HDMI ports. It has integrated 10/100/1000 Gigabit LAN through the RJ45 port on the back with optional internal Wireless-N. PCI card slot (PCI_1) 26
    PCI Express x1 card slot (PCIE1X3)
    PCI Express x16 card slot (PCIE16_1)
    PCI Express x1 card slot (PCIE1X2)
    PCI Express x1 card slot (PCIE1X1)
    PCI Express x8 card slot (PCIE8_2)
      Chassis and Power  
    The Studio XPS 9100 is 19.4 inches high by 7.8 inches wide by 20.7 inches deep. It weighs about 40 pounds. A 525-watt power supply powers the computer.
    I use Audition, Premiere Pro and After Effects (Dynamic Link) to edit concerts filmed on 4 HD Camera's (m2ts x3 and mp4) I also take and mix 6-8 tracks from soundboard and mix in audition. I find my system is struggling to keep up when I have done some color correction and then try to cut in multi-cam mode. My graphics card does not support CUDA and as stated above my system only has a 525w power supply. So a GeForce GTX 470, 570, 580 would not be compatable. I do not GAME but I work with large HD files (4 angles, 1-2 hours each, audio & effects).
    My trouble is I don't know which one of the graffics cards that support Mercury play back, would be the best for my needs without having to upgrade my power source (if possable). I'm thinking a mid level card and another 8-12 ram upgrade would be more suited (and cheaper) to my needs, unless I'm going to need a power upgrade anyway. If someone could please let me know what card would help me with my worload of these that would be great! I guess what Im saying is can someone tell me which of these is compatable with my system and is it worth it for the change in performance I will see?
    GeForce GTX 285 (Windows and Mac OS)
    GeForce GTX 470 (Windows)
    GeForce GTX 570 (Windows)
    GeForce GTX 580 (Windows)
    NVIDIA® Tesla C2075 card (Windows) when paired with a Quadro card as part of an NVIDIA Maximus™ configuration
    Quadro FX 3700M (Windows)
    Quadro FX 3800 (Windows)
    Quadro FX 3800M (Windows)
    Quadro FX 4800 (Windows and Mac OS)
    Quadro FX 5800 (Windows)
    Quadro 2000 (Windows)
    Quadro 2000D (Windows)
    Quadro 2000M (Windows)
    Quadro 3000M (Windows)
    Quadro 4000 (Windows and Mac OS)
    Quadro 4000M (Windows)
    Quadro 5000 (Windows)
    Quadro 5000M (Windows)
    Quadro 5010M (Windows)
    Quadro 6000 (Windows)
    Quadro CX (Windows)
    Tesla C2075** (Windows)

    Right now I can get a 570 for 175 bucks... R4yMoNd. When I look at the 570 in comparison  to what I have it doesnt look as though itis going to make too much difference. http://www.hwcompare.com/9048/geforce-gtx-570-vs-radeon-hd-5870/ I'm sure however the CUDA cores will speed it right up. I'm no good when it comes to all that so thanks to both you for the help. I have tracked down a 670 in stock (seems tough) for $440 then I need a 700 w power supply for about 70. If the 570 should take care of the problems listed above thats what I'm going for.. Just wasnt sure if it would make the needed difference

  • [SOLVED] - X won't start - Missing modules??

    Hello all, thanks for looking.
    I have installed from the Arch from the latest media, and followed the Begginers Guide.
    I have installed to a partition on my hard disk, one of many, and installed Grub and the mbr.
    The system boots fine. ALSA works, Xorg is installed, and pacman -Syu says "nothing to do"
    It all seems fine except... X won't start.
    I type startx and get the following errors in the /var/log/Xorg.0.log file :
    [   263.878]
    X.Org X Server 1.13.1
    Release Date: 2012-12-13
    [   263.879] X Protocol Version 11, Revision 0
    [   263.879] Build Operating System: Linux 3.7.0-1-ARCH i686
    [   263.879] Current Operating System: Linux midnightsun 3.6.11-1-ARCH #1 SMP PREEMPT Tue Dec 18 12:58:46 CET 2012 i686
    [   263.879] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=64b15d8f-85f1-412a-8fa9-fd054849176e ro quiet
    [   263.880] Build Date: 16 December 2012  04:52:09PM
    [   263.880] 
    [   263.880] Current version of pixman: 0.28.2
    [   263.880]     Before reporting problems, check http://wiki.x.org
        to make sure that you have the latest version.
    [   263.880] Markers: (--) probed, (**) from config file, (==) default setting,
        (++) from command line, (!!) notice, (II) informational,
        (WW) warning, (EE) error, (NI) not implemented, (??) unknown.
    [   263.881] (==) Log file: "/var/log/Xorg.0.log", Time: Mon Jan 14 23:36:51 2013
    [   263.882] (==) Using config directory: "/etc/X11/xorg.conf.d"
    [   263.882] (==) No Layout section.  Using the first Screen section.
    [   263.882] (==) No screen section available. Using defaults.
    [   263.882] (**) |-->Screen "Default Screen Section" (0)
    [   263.882] (**) |   |-->Monitor "<default monitor>"
    [   263.882] (==) No monitor specified for screen "Default Screen Section".
        Using a default monitor configuration.
    [   263.882] (==) Automatically adding devices
    [   263.882] (==) Automatically enabling devices
    [   263.882] (==) Automatically adding GPU devices
    [   263.882] (WW) The directory "/usr/share/fonts/TTF/" does not exist.
    [   263.882]     Entry deleted from font path.
    [   263.882] (WW) The directory "/usr/share/fonts/OTF/" does not exist.
    [   263.882]     Entry deleted from font path.
    [   263.882] (WW) The directory "/usr/share/fonts/Type1/" does not exist.
    [   263.882]     Entry deleted from font path.
    [   263.882] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
    [   263.882]     Entry deleted from font path.
    [   263.882]     (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
    [   263.882] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
    [   263.882]     Entry deleted from font path.
    [   263.882]     (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
    [   263.882] (==) FontPath set to:
        /usr/share/fonts/misc/
    [   263.882] (==) ModulePath set to "/usr/lib/xorg/modules"
    [   263.882] (II) The server relies on udev to provide the list of input devices.
        If no devices become available, reconfigure udev or disable AutoAddDevices.
    [   263.882] (II) Loader magic: 0x825a640
    [   263.882] (II) Module ABI versions:
    [   263.882]     X.Org ANSI C Emulation: 0.4
    [   263.882]     X.Org Video Driver: 13.1
    [   263.882]     X.Org XInput driver : 18.0
    [   263.882]     X.Org Server Extension : 7.0
    [   263.883] (II) config/udev: Adding drm device (/dev/dri/card0)
    [   263.884] (--) PCI:*(0:1:0:0) 10de:0402:0000:0000 rev 161, Mem @ 0xfd000000/16777216, 0xd0000000/268435456, 0xfa000000/33554432, I/O @ 0x0000cc00/128, BIOS @ 0x????????/131072
    [   263.884] (WW) Open ACPI failed (/var/run/acpid.socket) (No such file or directory)
    [   263.885] Initializing built-in extension Generic Event Extension
    [   263.885] Initializing built-in extension SHAPE
    [   263.885] Initializing built-in extension MIT-SHM
    [   263.885] Initializing built-in extension XInputExtension
    [   263.886] Initializing built-in extension XTEST
    [   263.886] Initializing built-in extension BIG-REQUESTS
    [   263.886] Initializing built-in extension SYNC
    [   263.886] Initializing built-in extension XKEYBOARD
    [   263.887] Initializing built-in extension XC-MISC
    [   263.887] Initializing built-in extension SECURITY
    [   263.887] Initializing built-in extension XINERAMA
    [   263.887] Initializing built-in extension XFIXES
    [   263.887] Initializing built-in extension RENDER
    [   263.888] Initializing built-in extension RANDR
    [   263.888] Initializing built-in extension COMPOSITE
    [   263.888] Initializing built-in extension DAMAGE
    [   263.888] Initializing built-in extension MIT-SCREEN-SAVER
    [   263.888] Initializing built-in extension DOUBLE-BUFFER
    [   263.889] Initializing built-in extension RECORD
    [   263.889] Initializing built-in extension DPMS
    [   263.889] Initializing built-in extension X-Resource
    [   263.889] Initializing built-in extension XVideo
    [   263.889] Initializing built-in extension XVideo-MotionCompensation
    [   263.889] Initializing built-in extension XFree86-VidModeExtension
    [   263.890] Initializing built-in extension XFree86-DGA
    [   263.890] Initializing built-in extension XFree86-DRI
    [   263.890] Initializing built-in extension DRI2
    [   263.890] (II) LoadModule: "glx"
    [   263.890] (WW) Warning, couldn't open module glx
    [   263.890] (II) UnloadModule: "glx"
    [   263.890] (II) Unloading glx
    [   263.890] (EE) Failed to load module "glx" (module does not exist, 0)
    [   263.890] (==) Matched nouveau as autoconfigured driver 0
    [   263.890] (==) Matched nvidia as autoconfigured driver 1
    [   263.890] (==) Matched nv as autoconfigured driver 2
    [   263.890] (==) Matched nouveau as autoconfigured driver 3
    [   263.890] (==) Matched nvidia as autoconfigured driver 4
    [   263.890] (==) Matched nv as autoconfigured driver 5
    [   263.890] (==) Matched vesa as autoconfigured driver 6
    [   263.890] (==) Matched modesetting as autoconfigured driver 7
    [   263.890] (==) Matched fbdev as autoconfigured driver 8
    [   263.890] (==) Assigned the driver to the xf86ConfigLayout
    [   263.890] (II) LoadModule: "nouveau"
    [   263.891] (WW) Warning, couldn't open module nouveau
    [   263.891] (II) UnloadModule: "nouveau"
    [   263.891] (II) Unloading nouveau
    [   263.891] (EE) Failed to load module "nouveau" (module does not exist, 0)
    [   263.891] (II) LoadModule: "nvidia"
    [   263.891] (WW) Warning, couldn't open module nvidia
    [   263.891] (II) UnloadModule: "nvidia"
    [   263.891] (II) Unloading nvidia
    [   263.891] (EE) Failed to load module "nvidia" (module does not exist, 0)
    [   263.891] (II) LoadModule: "nv"
    [   263.891] (II) Loading /usr/lib/xorg/modules/drivers/nv_drv.so
    [   263.891] (II) Module nv: vendor="X.Org Foundation"
    [   263.891]     compiled for 1.13.0, module version = 2.1.20
    [   263.891]     Module class: X.Org Video Driver
    [   263.891]     ABI class: X.Org Video Driver, version 13.0
    [   263.891] (II) LoadModule: "vesa"
    [   263.891] (WW) Warning, couldn't open module vesa
    [   263.891] (II) UnloadModule: "vesa"
    [   263.891] (II) Unloading vesa
    [   263.891] (EE) Failed to load module "vesa" (module does not exist, 0)
    [   263.891] (II) LoadModule: "modesetting"
    [   263.892] (WW) Warning, couldn't open module modesetting
    [   263.892] (II) UnloadModule: "modesetting"
    [   263.892] (II) Unloading modesetting
    [   263.892] (EE) Failed to load module "modesetting" (module does not exist, 0)
    [   263.892] (II) LoadModule: "fbdev"
    [   263.892] (WW) Warning, couldn't open module fbdev
    [   263.892] (II) UnloadModule: "fbdev"
    [   263.892] (II) Unloading fbdev
    [   263.892] (EE) Failed to load module "fbdev" (module does not exist, 0)
    [   263.892] (II) NV: driver for NVIDIA chipsets: RIVA 128, RIVA TNT, RIVA TNT2,
        Unknown TNT2, Vanta, RIVA TNT2 Ultra, RIVA TNT2 Model 64,
        Aladdin TNT2, GeForce 256, GeForce DDR, Quadro, GeForce2 MX/MX 400,
        GeForce2 MX 100/200, GeForce2 Go, Quadro2 MXR/EX/Go,
        GeForce2 Integrated GPU, GeForce2 GTS, GeForce2 Ti, GeForce2 Ultra,
        Quadro2 Pro, GeForce4 MX 460, GeForce4 MX 440, GeForce4 MX 420,
        GeForce4 MX 440-SE, GeForce4 440 Go, GeForce4 420 Go,
        GeForce4 420 Go 32M, GeForce4 460 Go, Quadro4 550 XGL,
        GeForce4 440 Go 64M, Quadro NVS, Quadro4 500 GoGL,
        GeForce4 410 Go 16M, GeForce4 MX 440 with AGP8X,
        GeForce4 MX 440SE with AGP8X, GeForce4 MX 420 with AGP8X,
        GeForce4 MX 4000, GeForce4 448 Go, GeForce4 488 Go, Quadro4 580 XGL,
        Quadro4 NVS 280 SD, Quadro4 380 XGL, Quadro NVS 50 PCI,
        GeForce4 448 Go, GeForce4 MX Integrated GPU, GeForce3,
        GeForce3 Ti 200, GeForce3 Ti 500, Quadro DCC, GeForce4 Ti 4600,
        GeForce4 Ti 4400, GeForce4 Ti 4200, Quadro4 900 XGL, Quadro4 750 XGL,
        Quadro4 700 XGL, GeForce4 Ti 4800, GeForce4 Ti 4200 with AGP8X,
        GeForce4 Ti 4800 SE, GeForce4 4200 Go, Quadro4 700 GoGL,
        Quadro4 980 XGL, Quadro4 780 XGL, GeForce FX 5800 Ultra,
        GeForce FX 5800, Quadro FX 2000, Quadro FX 1000,
        GeForce FX 5600 Ultra, GeForce FX 5600, GeForce FX 5600XT,
        GeForce FX Go5600, GeForce FX Go5650, Quadro FX Go700,
        GeForce FX 5200, GeForce FX 5200 Ultra, GeForce FX 5200,
        GeForce FX 5200LE, GeForce FX Go5200, GeForce FX Go5250,
        GeForce FX 5500, GeForce FX 5100, GeForce FX Go5200 32M/64M,
        Quadro NVS 55/280 PCI, Quadro FX 500/600 PCI,
        GeForce FX Go53xx Series, GeForce FX Go5100, GeForce FX 5900 Ultra,
        GeForce FX 5900, GeForce FX 5900XT, GeForce FX 5950 Ultra,
        GeForce FX 5900ZT, Quadro FX 3000, Quadro FX 700,
        GeForce FX 5700 Ultra, GeForce FX 5700, GeForce FX 5700LE,
        GeForce FX 5700VE, GeForce FX Go5700, GeForce FX Go5700,
        Quadro FX Go1000, Quadro FX 1100, GeForce 6800 Ultra, GeForce 6800,
        GeForce 6800 LE, GeForce 6800 XE, GeForce 6800 XT, GeForce 6800 GT,
        GeForce 6800 GT, GeForce 6800 GS, GeForce 6800 XT, Quadro FX 4000,
        GeForce 6800 GS, GeForce 6800, GeForce 6800 LE, GeForce 6800 XT,
        GeForce Go 6800, GeForce Go 6800 Ultra, Quadro FX Go1400,
        Quadro FX 3450/4000 SDI, Quadro FX 1400, GeForce 6600 GT,
        GeForce 6600, GeForce 6600 LE, GeForce 6600 VE, GeForce Go 6600,
        GeForce 6610 XL, GeForce Go 6600 TE/6200 TE, GeForce 6700 XL,
        GeForce Go 6600, GeForce Go 6600 GT, Quadro NVS 440, Quadro FX 550,
        Quadro FX 550, Quadro FX 540, GeForce 6200, GeForce 6500,
        GeForce 6200 TurboCache(TM), GeForce 6200SE TurboCache(TM),
        GeForce 6200 LE, GeForce Go 6200, Quadro NVS 285, GeForce Go 6400,
        GeForce Go 6200, GeForce Go 6400, GeForce 6250, GeForce 7100 GS,
        GeForce 6800, GeForce 6800 LE, GeForce 6800 GT, GeForce 6800 XT,
        GeForce 6200, GeForce 6200 A-LE, GeForce 7800 GTX, GeForce 7800 GTX,
        GeForce 7800 GT, GeForce 7800 GS, GeForce 7800 SLI, GeForce Go 7800,
        GeForce Go 7800 GTX, Quadro FX 4500, GeForce 7350 LE,
        GeForce 7300 LE, GeForce 7300 SE, GeForce Go 7200, GeForce Go 7300,
        GeForce Go 7400, GeForce Go 7400 GS, Quadro NVS 110M,
        Quadro NVS 120M, Quadro FX 350M, GeForce 7500 LE, Quadro FX 350,
        GeForce 7300 GS, GeForce 7650 GS, GeForce 7600 GT, GeForce 7600 GS,
        GeForce 7300 GT, GeForce 7600 LE, GeForce 7300 GT, GeForce Go 7700,
        GeForce Go 7600, GeForce Go 7600 GT, Quadro NVS 300M,
        GeForce Go 7900 SE, Quadro FX 550M, Quadro FX 560, GeForce 7900 GTX,
        GeForce 7900 GT, GeForce 7900 GS, GeForce 7950 GX2, GeForce 7950 GX2,
        GeForce 7950 GT, GeForce Go 7950 GTX, GeForce Go 7900 GS,
        GeForce Go 7900 GTX, Quadro FX 2500M, Quadro FX 1500M,
        Quadro FX 5500, Quadro FX 3500, Quadro FX 1500, Quadro FX 4500 X2,
        GeForce 6150, GeForce 6150 LE, GeForce 6100, GeForce Go 6150,
        Quadro NVS 210S / NVIDIA GeForce 6150LE, GeForce Go 6100,
        GeForce 6150SE, GeForce 6100 nForce 405, GeForce 6100 nForce 400,
        GeForce 6100 nForce 420, GeForce 7150M / nForce 630M,
        GeForce 7000M / nForce 610M, GeForce 7050 PV / nForce 630a,
        GeForce 7050 PV / nForce 630a, GeForce 7025 / nForce 630a,
        GeForce 8800 GTX, GeForce 8800 GTS, GeForce 8800 Ultra,
        Quadro FX 5600, Quadro FX 4600, GeForce 8600 GTS, GeForce 8600 GT,
        GeForce 8600 GT, GeForce 8600 GS, GeForce 8400 GS, GeForce 9500M GS,
        GeForce 8300 GS, GeForce 8600M GT, GeForce 9650M GS,
        GeForce 8700M GT, Quadro FX 370, Quadro NVS 320M, Quadro FX 570M,
        Quadro FX 1600M, Quadro FX 570, Quadro FX 1700, GeForce GT 330,
        GeForce 8400 SE, GeForce 8500 GT, GeForce 8400 GS, GeForce 8300 GS,
        GeForce 8400 GS, GeForce 8600M GS, GeForce 8400M GT,
        GeForce 8400M GS, GeForce 8400M G, Quadro NVS 140M, Quadro NVS 130M,
        Quadro NVS 135M, GeForce 9400 GT, Quadro FX 360M, GeForce 9300M G,
        Quadro NVS 290, GeForce GTX 295, GeForce GTX 280, GeForce GTX 260,
        GeForce GTX 285, GeForce GTX 275, GeForce GTX 260, GeForce GTX 295,
        Quadroplex 2200 D2, Quadroplex 2200 S4, Quadro CX, Quadro FX 5800,
        Quadro FX 4800, Quadro FX 3800, GeForce 8800 GTS 512,
        GeForce 9800 GT, GeForce 8800 GT, GeForce GT 230, GeForce 9800 GX2,
        GeForce 9800 GT, GeForce 8800 GS, GeForce GTS 240, GeForce 9800M GTX,
        GeForce 8800M GTS, GeForce GTX 280M, GeForce 9800M GT,
        GeForce 8800M GTX, GeForce 8800 GS, GeForce GTX 285M,
        GeForce 9600 GSO, GeForce 8800 GT, GeForce 9800 GTX/9800 GTX+,
        GeForce 9800 GTX+, GeForce 9800 GT, GeForce GTS 250,
        GeForce 9800M GTX, GeForce GTX 260M, Quadro FX 4700 X2,
        Quadro FX 3700, Quadro VX 200, Quadro FX 3600M, Quadro FX 2800M,
        Quadro FX 3700M, Quadro FX 3800M, GeForce 9600 GT, GeForce 9600 GS,
        GeForce 9600 GSO 512, GeForce GT 130, GeForce GT 140,
        GeForce 9800M GTS, GeForce 9700M GTS, GeForce 9800M GS,
        GeForce 9800M GTS, GeForce 9600 GT, GeForce 9600 GT,
        GeForce GTS 160M, GeForce GTS 150M, GeForce 9600 GSO,
        GeForce 9600 GT, Quadro FX 1800, Quadro FX 2700M, GeForce 9500 GT,
        GeForce 9400 GT, GeForce 9500 GT, GeForce 9500 GS, GeForce 9500 GS,
        GeForce GT 120, GeForce 9600M GT, GeForce 9600M GS, GeForce 9600M GT,
        GeForce 9700M GT, GeForce 9500M G, GeForce 9650M GT, GeForce G 110M,
        GeForce GT 130M, GeForce GT 120M, GeForce GT 220M, GeForce 9650 S,
        Quadro FX 380, Quadro FX 580, Quadro FX 1700M, GeForce 9400 GT,
        Quadro FX 770M, GeForce 9300 GE, GeForce 9300 GS, GeForce 8400,
        GeForce 8400 SE, GeForce 8400 GS, GeForce 9300M GS, GeForce G100,
        GeForce 9300 SE, GeForce 9200M GS, GeForce 9300M GS, Quadro NVS 150M,
        Quadro NVS 160M, GeForce G 105M, GeForce G 103M, GeForce G105M,
        Quadro NVS 420, Quadro FX 370 LP, Quadro NVS 450, Quadro FX 370M,
        Quadro NVS 295, GeForce 9100M G, GeForce 8200M G, GeForce 9200,
        GeForce 9100, GeForce 8300, GeForce 8200, nForce 730a, GeForce 9200,
        nForce 980a/780a SLI, nForce 750a SLI, GeForce 8100 / nForce 720a,
        GeForce 9400, GeForce 9400, GeForce 9400M G, GeForce 9400M,
        GeForce 9300, ION, GeForce 9400M G, GeForce 9400, nForce 760i SLI,
        GeForce 9400, GeForce 9300 / nForce 730i, GeForce 9200,
        GeForce 9100M G, GeForce 8200M G, GeForce 9400M, GeForce 9200,
        GeForce G102M, GeForce G102M, ION, ION, GeForce 9400, ION, ION LE,
        ION LE, GeForce GT 220, GeForce 315, GeForce 210, GeForce GT 230M,
        GeForce GT 330M, GeForce GT 230M, GeForce GT 330M, NVS 5100M,
        GeForce GT 320M, GeForce GT 240M, GeForce GT 325M, Quadro FX 880M,
        GeForce G210, GeForce 205, GeForce 310, ION, GeForce 210,
        GeForce 310, GeForce 315, GeForce G105M, GeForce G105M, NVS 2100M,
        NVS 3100M, GeForce 305M, ION, GeForce 310M, GeForce 305M,
        GeForce 310M, GeForce 305M, GeForce G210M, GeForce 310M,
        Quadro FX 380 LP, Quadro FX 380M, GeForce GT 330, GeForce GT 320,
        GeForce GT 240, GeForce GT 340, GeForce GT 330, GeForce GTS 260M,
        GeForce GTS 250M, GeForce 315, GeForce GT 335M, GeForce GTS 350M,
        GeForce GTS 360M, Quadro FX 1800M
    [   263.895] (++) using VT number 1
    [   263.895] (EE) NV: The PCI device 0x10de0402 (GeForce 8600 GT) at 01@00:00:0 has a kernel module claiming it.
    [   263.895] (EE) NV: This driver cannot operate until it has been unloaded.
    [   263.895] (EE) NV: The PCI device 0x10de0402 (GeForce 8600 GT) at 01@00:00:0 has a kernel module claiming it.
    [   263.895] (EE) NV: This driver cannot operate until it has been unloaded.
    [   263.895] (EE) No devices detected.
    [   263.895]
    Fatal server error:
    [   263.895] no screens found
    [   263.895] (EE)
    Please consult the The X.Org Foundation support
         at http://wiki.x.org
    for help.
    [   263.895] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
    [   263.896] (EE)
    It appears that some modules are missing, and indeed none of those mentioned in the errors are there if I do lsmod.
    But that is about the limit of my understanding.
    Can anyone tell me how to add the modules if they aren't even on the machine at all.
    Pacman doesn't find them. For example pacman -S glx gives package not found.
    Any ideas or pointers much appreciated.
    Last edited by Midnight Sun (2013-01-16 00:01:35)

    I Can't Believe It
    NOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOOO!
    I swear I checked that 6 hours ago when I first tried startx.
    OH
    MY
    GOD
    Just give me a moment to calm down..........
    OK. Thank you. You are completely and joyously right.
    It would seem that I had neglected to install the video driver.
    Thanks for that.

Maybe you are looking for

  • Running a Dynpro-based Report as a Job/in Background mode

    Hello, i've got a report which hasn't got a selection-screen as its startscreen, but a complex dynpro and is based on different start-buttons and not only the "basic" F8/Run-Button. the users still would like to be able to run the report in backgroun

  • TS1538 My iphone reset and wont connect to my computer at all

    My iphone reset on its own and when i connect it to my wall  charger it takes me to the reset screen and tells me to connect to Itunes but when I connect it to my computer it wont turn on. The apple log comes on then the screen goes black every two m

  • IWeb 09 and Godaddy Search Engine Visibility

    Has anyone used GoDaddy's Search Engine visibility tool with an iWeb 09 site hosted through MobileMe? I love the simplicity of iWeb but would love to add keywords and optimize my site for web searches. Any advice? cheers!

  • MacBook Air hard disk subfolder sizes don't add up to parent foler size

    Hi, My MacBook Air has only 4GB of hard disk space free, so I want to work out what I can archive onto an external hard drive.  However, I don't seem to be able to find some of the files. My user folder total size is 93GB, but when I add up the subfo

  • How to create row through VO?

    Hai, I wrote code for creation of Row through ViewObject and i called that method using Mbean. But it is Not at all creating Row. Whether it is right? ViewObject as=this; Row r2=getViewObject().createRow(); // Row r2=getCurrentRow(); r2.setAttribute(