Quadro K2000m drivers Win 8.1 W530

Hello everyone,
I was trying to see whether the drivers I originally had (can't remember the version) for the Quadro K2000m on my W530 were doing their job.
The first sign I noticed that something was off was when playing CS: GO and I can only play it at 1600x900 (using only the laptop's LCD) with most settings in medium and some in high. Then, I noticed that although Premiere Pro CS6 works with the CUDA cores (I can play and add effects to most clips and still play them in real time from a 170mbps GH2 patch) I appear to still not get full performance since some effects immediately make playback choppy.
According to GPU-Z, the GPU is not working when I render my work area in Premiere.
I am attaching two screenshots from GPU-Z. The sensors screenshot shows what the GPU usage when playing a clip in full resolution with one effect (filmconvert) added to the clip. Playback is choppy. I would say it drops half the frames every second.
Now, the kicker...since I downloaded a new driver from Lenovo, I started getting BSODs.
So I downloaded another one from NVIDIA...same BSODs and usually not when I am working. Mostly when I am browsing of doing not much like watching a video on youtube or vimeo.
Am I missing something here?

When you run the NVIDIA installer, choose Custom. At the page where you can choose components to install/upgrade, there should be a checkbox for clean install. It will uninstall the old driver, prompt for reboot, then install the new driver.
You can quickly check if Premiere is set to run on discrete by right-clicking on the shortcut (not sure if this works in the Metro UI), and looking in the "Run with graphics processor" submenu. If this says integrated is default, then you can change this in the NVIDIA Control Panel.
W520: i7-2720QM, Q2000M at 1080/688/1376, 21GB RAM, 500GB + 750GB HDD, FHD screen
X61T: L7500, 3GB RAM, 500GB HDD, XGA screen, Ultrabase
Y3P: 5Y70, 8GB RAM, 256GB SSD, QHD+ screen

Similar Messages

Premiere CC crashes on launch on Lenovo ThinkPad W530/Quadro K2000M

Hey everyone!
I can't get Premiere Pro CC to launch on my new laptop--Lenovo ThinkPad W530 with Quadro K2000M graphics. On launch I get "Adobe Premiere CC has stopped working."
The K2000M is on the approved list, so I was hoping that wouldn't be a problem. But uninstalling the nVidia drivers does actually allow me to open Premiere, so clearly that is the problem. I went to the Lenovo site and I'm using the most up-to-date driver (9.18.13.1270/8.15.10.2725/G5DE43WW).
Things that didn't work that I've seen elsewhere on this forum:
- signing out of and into Creative Cloud
- running Premiere in Windows 7 compatibility mode
- running Premiere as administrator
Any help in getting the program and the nVidia running at the same time would be appreciated...I have a project coming up shortly.
Matt Levie
If it helps, here's the problem signature:
Problem signature:
Problem Event Name:    BEX64
Application Name:    Adobe Premiere Pro.exe
Application Version:    7.2.1.4
Application Timestamp:    52aed7f3
Fault Module Name:    StackHash_1dc2
Fault Module Version:    0.0.0.0
Fault Module Timestamp:    00000000
Exception Offset:    0000000000000000
Exception Code:    c0000005
Exception Data:    0000000000000008
OS Version:    6.1.7601.2.1.0.256.48
Locale ID:    1033
Additional Information 1:    1dc2
Additional Information 2:    1dc22fb1de37d348f27e54dbb5278e7d
Additional Information 3:    eae3
Additional Information 4:    eae36a4b5ffb27c9d33117f4125a75c2

Unfortunately, the crash data you posted doesn't give us any clues.
It looks like the driver you're on is very fresh: 2014-1/5. Another user recently reported a different problem on a Lenovo w/ the K1000M (http://forums.adobe.com/message/5987620#5987620). Don't know yet what driver he's on, but if he's also on a new one, I'd begin to suspect a bug in the driver.
Some additional data could be illuminating. Premiere installs a utility called GPUsniffer. You'll find it here: C:\Program Files\Adobe\Adobe Premiere Pro CC. However, unless you read quicker than I do--and I mean waaaay faster--launching it from there won't do much good. You'll have to open the command console, navigate to the path above, and type gpusniffer.exe. (Let me know if you need more explicit instructions for getting around in the console.) Then copy the report and paste it here.
edited to add: To help determine if the current Lenovo K2000M driver is at fault--and possibly get yourself back in business--please roll back to an earlier driver.

Installation nvidia on Quadro K2000M

Hi there
I am trying to install the latest nvidia driver on my arch installation, but without any success.
After I installed the driver as suggested in the wiki I am stuck with a black screen... all the tips stated in the wiki do not seem to work.
I would like to have the nvidia and the intel driver installed, so I can switch manually in the bios which card to use (no optimus needed)
lspci | grep "VGA"
01:00.0 VGA compatible controller: NVIDIA Corporation GK107GLM [Quadro K2000M] (rev a1)
has anybody successfully installed the nvidia driver with a Quadro K2000M?
wucherpfennig
Last edited by wucherpfennig (2014-07-09 23:20:34)

stilll no success. here is my xorg.log (i tried to set up optimus, all settings are according to the wiki page)
[ 4.847]
X.Org X Server 1.15.2
Release Date: 2014-06-27
[ 4.847] X Protocol Version 11, Revision 0
[ 4.847] Build Operating System: Linux 3.15.1-1-ARCH x86_64
[ 4.847] Current Operating System: Linux lastesel 3.15.5-1-ARCH #1 SMP PREEMPT Thu Jul 10 07:08:50 CEST 2014 x86_64
[ 4.847] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-linux root=UUID=3ca83d3d-6d1b-4543-8551-56238718e4f1 rw quiet rcutree.rcu_idle_gp_delay=1
[ 4.847] Build Date: 27 June 2014 07:32:26PM
[ 4.847]
[ 4.847] Current version of pixman: 0.32.6
[ 4.847] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 4.847] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 4.847] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Jul 17 22:32:35 2014
[ 4.850] (==) Using config file: "/etc/X11/xorg.conf"
[ 4.850] (==) Using config directory: "/etc/X11/xorg.conf.d"
[ 4.850] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 4.856] (==) ServerLayout "layout"
[ 4.856] (**) |-->Screen "nvidia" (0)
[ 4.856] (**) | |-->Monitor "<default monitor>"
[ 4.858] (**) | |-->Device "nvidia"
[ 4.858] (==) No monitor specified for screen "nvidia".
Using a default monitor configuration.
[ 4.858] (**) |-->Inactive Device "intel"
[ 4.858] (==) Automatically adding devices
[ 4.858] (==) Automatically enabling devices
[ 4.858] (==) Automatically adding GPU devices
[ 4.865] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/100dpi/".
[ 4.865] Entry deleted from font path.
[ 4.865] (Run 'mkfontdir' on "/usr/share/fonts/100dpi/").
[ 4.865] (WW) `fonts.dir' not found (or not valid) in "/usr/share/fonts/75dpi/".
[ 4.865] Entry deleted from font path.
[ 4.865] (Run 'mkfontdir' on "/usr/share/fonts/75dpi/").
[ 4.866] (==) FontPath set to:
/usr/share/fonts/misc/,
/usr/share/fonts/TTF/,
/usr/share/fonts/OTF/,
/usr/share/fonts/Type1/
[ 4.866] (==) ModulePath set to "/usr/lib/xorg/modules"
[ 4.866] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 4.866] (II) Loader magic: 0x811cc0
[ 4.866] (II) Module ABI versions:
[ 4.866] X.Org ANSI C Emulation: 0.4
[ 4.866] X.Org Video Driver: 15.0
[ 4.866] X.Org XInput driver : 20.0
[ 4.866] X.Org Server Extension : 8.0
[ 4.866] (II) xfree86: Adding drm device (/dev/dri/card1)
[ 4.866] (II) xfree86: Adding drm device (/dev/dri/card0)
[ 4.867] (--) PCI:*(0:0:2:0) 8086:0166:17aa:21f5 rev 9, Mem @ 0xf1400000/4194304, 0xe0000000/268435456, I/O @ 0x00006000/64
[ 4.867] (--) PCI: (0:1:0:0) 10de:0ffb:17aa:21f5 rev 161, Mem @ 0xf0000000/16777216, 0xc0000000/268435456, 0xd0000000/33554432, I/O @ 0x00005000/128, BIOS @ 0x????????/524288
[ 4.867] (II) Open ACPI successful (/var/run/acpid.socket)
[ 4.869] Initializing built-in extension Generic Event Extension
[ 4.869] Initializing built-in extension SHAPE
[ 4.869] Initializing built-in extension MIT-SHM
[ 4.869] Initializing built-in extension XInputExtension
[ 4.869] Initializing built-in extension XTEST
[ 4.869] Initializing built-in extension BIG-REQUESTS
[ 4.869] Initializing built-in extension SYNC
[ 4.869] Initializing built-in extension XKEYBOARD
[ 4.869] Initializing built-in extension XC-MISC
[ 4.869] Initializing built-in extension SECURITY
[ 4.869] Initializing built-in extension XINERAMA
[ 4.869] Initializing built-in extension XFIXES
[ 4.869] Initializing built-in extension RENDER
[ 4.869] Initializing built-in extension RANDR
[ 4.869] Initializing built-in extension COMPOSITE
[ 4.869] Initializing built-in extension DAMAGE
[ 4.869] Initializing built-in extension MIT-SCREEN-SAVER
[ 4.869] Initializing built-in extension DOUBLE-BUFFER
[ 4.869] Initializing built-in extension RECORD
[ 4.869] Initializing built-in extension DPMS
[ 4.869] Initializing built-in extension Present
[ 4.869] Initializing built-in extension DRI3
[ 4.869] Initializing built-in extension X-Resource
[ 4.869] Initializing built-in extension XVideo
[ 4.869] Initializing built-in extension XVideo-MotionCompensation
[ 4.869] Initializing built-in extension XFree86-VidModeExtension
[ 4.869] Initializing built-in extension XFree86-DGA
[ 4.869] Initializing built-in extension XFree86-DRI
[ 4.869] Initializing built-in extension DRI2
[ 4.869] (II) "glx" will be loaded by default.
[ 4.869] (II) LoadModule: "dri2"
[ 4.869] (II) Module "dri2" already built-in
[ 4.869] (II) LoadModule: "glamoregl"
[ 4.873] (II) Loading /usr/lib/xorg/modules/libglamoregl.so
[ 5.053] (II) Module glamoregl: vendor="X.Org Foundation"
[ 5.053] compiled for 1.15.0, module version = 0.6.0
[ 5.053] ABI class: X.Org ANSI C Emulation, version 0.4
[ 5.053] (II) LoadModule: "glx"
[ 5.053] (II) Loading /usr/lib/xorg/modules/extensions/libglx.so
[ 5.216] (II) Module glx: vendor="NVIDIA Corporation"
[ 5.216] compiled for 4.0.2, module version = 1.0.0
[ 5.216] Module class: X.Org Server Extension
[ 5.218] (II) NVIDIA GLX Module 340.24 Wed Jul 2 15:04:31 PDT 2014
[ 5.218] Loading extension GLX
[ 5.218] (II) LoadModule: "nvidia"
[ 5.218] (II) Loading /usr/lib/xorg/modules/drivers/nvidia_drv.so
[ 5.236] (II) Module nvidia: vendor="NVIDIA Corporation"
[ 5.236] compiled for 4.0.2, module version = 1.0.0
[ 5.236] Module class: X.Org Video Driver
[ 5.237] (II) LoadModule: "intel"
[ 5.237] (II) Loading /usr/lib/xorg/modules/drivers/intel_drv.so
[ 5.241] (II) Module intel: vendor="X.Org Foundation"
[ 5.241] compiled for 1.15.2, module version = 2.99.912
[ 5.241] Module class: X.Org Video Driver
[ 5.241] ABI class: X.Org Video Driver, version 15.0
[ 5.241] (II) NVIDIA dlloader X Driver 340.24 Wed Jul 2 14:42:23 PDT 2014
[ 5.241] (II) NVIDIA Unified Driver for all Supported NVIDIA GPUs
[ 5.241] (II) intel: Driver for Intel(R) Integrated Graphics Chipsets:
i810, i810-dc100, i810e, i815, i830M, 845G, 854, 852GM/855GM, 865G,
915G, E7221 (i915), 915GM, 945G, 945GM, 945GME, Pineview GM,
Pineview G, 965G, G35, 965Q, 946GZ, 965GM, 965GME/GLE, G33, Q35, Q33,
GM45, 4 Series, G45/G43, Q45/Q43, G41, B43
[ 5.242] (II) intel: Driver for Intel(R) HD Graphics: 2000-5000
[ 5.242] (II) intel: Driver for Intel(R) Iris(TM) Graphics: 5100
[ 5.242] (II) intel: Driver for Intel(R) Iris(TM) Pro Graphics: 5200
[ 5.242] (++) using VT number 7
[ 5.248] (II) Loading sub module "fb"
[ 5.248] (II) LoadModule: "fb"
[ 5.248] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 5.251] (II) Module fb: vendor="X.Org Foundation"
[ 5.251] compiled for 1.15.2, module version = 1.0.0
[ 5.251] ABI class: X.Org ANSI C Emulation, version 0.4
[ 5.251] (WW) Unresolved symbol: fbGetGCPrivateKey
[ 5.251] (II) Loading sub module "wfb"
[ 5.251] (II) LoadModule: "wfb"
[ 5.251] (II) Loading /usr/lib/xorg/modules/libwfb.so
[ 5.254] (II) Module wfb: vendor="X.Org Foundation"
[ 5.254] compiled for 1.15.2, module version = 1.0.0
[ 5.254] ABI class: X.Org ANSI C Emulation, version 0.4
[ 5.254] (II) Loading sub module "ramdac"
[ 5.254] (II) LoadModule: "ramdac"
[ 5.254] (II) Module "ramdac" already built-in
[ 5.259] (II) intel(1): Using Kernel Mode Setting driver: i915, version 1.6.0 20080730
[ 5.264] (II) intel(G0): Using Kernel Mode Setting driver: i915, version 1.6.0 20080730
[ 5.264] (EE) Screen 1 deleted because of no matching config section.
[ 5.264] (II) UnloadModule: "intel"
[ 5.264] (II) NVIDIA(0): Creating default Display subsection in Screen section
"nvidia" for depth/fbbpp 24/32
[ 5.264] (==) NVIDIA(0): Depth 24, (==) framebuffer bpp 32
[ 5.264] (==) NVIDIA(0): RGB weight 888
[ 5.264] (==) NVIDIA(0): Default visual is TrueColor
[ 5.264] (==) NVIDIA(0): Using gamma correction (1.0, 1.0, 1.0)
[ 5.268] (**) NVIDIA(0): Enabling 2D acceleration
[ 9.541] (EE) NVIDIA(GPU-0): Failed to initialize the NVIDIA GPU at PCI:1:0:0. Please
[ 9.541] (EE) NVIDIA(GPU-0): check your system's kernel log for additional error
[ 9.541] (EE) NVIDIA(GPU-0): messages and refer to Chapter 8: Common Problems in the
[ 9.541] (EE) NVIDIA(GPU-0): README for additional information.
[ 9.542] (EE) NVIDIA(GPU-0): Failed to initialize the NVIDIA graphics device!
[ 9.542] (EE) NVIDIA(0): Failing initialization of X screen 0
[ 9.542] (II) UnloadModule: "nvidia"
[ 9.542] (II) UnloadSubModule: "wfb"
[ 9.542] (II) UnloadSubModule: "fb"
[ 11.796] (EE) intel(G0): [drm] failed to set drm interface version: Permission denied [13].
[ 11.796] (EE) intel(G0): Failed to claim DRM device.
[ 11.796] (II) UnloadModule: "intel"
[ 11.796] (EE) Screen(s) found, but none have a usable configuration.
[ 11.796] (EE)
Fatal server error:
[ 11.796] (EE) no screens found(EE)
[ 11.796] (EE)
Please consult the The X.Org Foundation support
at http://wiki.x.org
for help.
[ 11.796] (EE) Please also check the log file at "/var/log/Xorg.0.log" for additional information.
[ 11.796] (EE)
[ 11.805] (EE) Server terminated with error (1). Closing log file.
Adding rcutree.rcu_idle_gp_delay=1 to grub does not resolve the problem...
thanks for your help
Last edited by wucherpfennig (2014-07-17 20:40:58)

Incompatibility quadro k2000m and after effects cs6

Hi
I just recieved my new dell laptop m4700 with a nvidia quadro k2000m.
its sell as a fully compatible cuda card for all cs6 products. but gpu render doesnt work !!!! ray traced 3d is only on cpu... very boring.
Whats the problem ? are drivers too young ? not yet compatible ? need an after effects update ?
i've the same problem with premiere who doesnt use mercury gpu playback... (photoshop isnt very fast too...)
im very disapointed with my all brand new pc........
Help me please ! i do not find any discussion about it on the web.
apologize my english, im french.
thx a lot
ciao

melkirn wrote:
Where do you find the 'adobe compatible card list' [lease?
After Effects tech specs
Premiere Pro tech specs
I found them by doing a Google search for...well, those exact terms.

NVIDIA Quadro 2100M vs Quadro K2000M

I got my Thinkpad W530 today. It comes with NVIDIA Quadro 2100M. Is this the same as NVIDIA Quadro K2000M? I also notice that the fan run louder than my W500. Is this normal? Thank you.
Intel Core i7-3820, Windows 7 Pro, 4GB, 320G HDD.

viman89,
See post by ibmthink in this thread.
http://forums.lenovo.com/t5/W-Series-ThinkPad-Laptops/W530-Sub-par-features-to-the-actual-components...
*Non Lenovo employee*
I have a Y2P (i5) ... Feel free to ping me if you want me to test some applications with your Y2P if you have the same model. I don't mind keep doing recovery on it if needed .... =)

NVIDIA Quadro K2000M Stress Test Warning

Anyone with the NVIDIA Quadro K2000M card: Has anyone received a stress test warning after running a hardware scan?
I am currently connected to only two monitors (through the dock). And during the scan, I only had a couple of browsers open. I was not streaming or watching videos; simply reading a couple of articles (nothing "stressfull" taking place).
This is the first time this has come up; I will be checking settings and running the test later.
I couldn't find anything on the result code I received: WVC00V000-WJSWSM
Just thought I would check if anyone else had received the same result (stress test warning if not same code) and what the final outcome was.

Similar result on a T530 with i7, 8GB, and NVidia 5400: installed new version of Lenovo Solutions (prompted by Lenovo when I opened my existing version), ran full hardware check, everything passed except stress test on video card, which gave warning with result code WVC00V000-UJ8XWD. Am also running in a dock (Mini Series 3+, not the USB 3.0 version) with a single external monitor attached to a DVI port.
Interestingly, the log section for the NVidia 5400 says "Displays: 4", as if it thinks that I have 4 displays attached (whereas the log section for Intel 4000 video card says "Displays: 1"). Since the dock could output three displays (two outputs that can be either DisplayPort or DVI, plus one VGA) and the laptop screen is active, perhaps the program is assuming that it's actually running four screens.
The fan exhaust put out some serious heat during that part of the test. A couple of programs were open but not in use during the hardware test. I had not run the hardware test under the previous version of Lenovo Solutions, so I don't know whether it would have shown the same thing, or whether it's new to the new version of Lenovo Solutions.
Would appreciate any insights the community has to offer.
Thanks.

W530 Quadro K2000m and Premiere Pro CS6

Hi all,
I have a W530 with i7, Q K2000m, 32gb ram and 3 interal drives (1msata ssd, 2 hgst 7k1000 1tb in the other two bays). I don't know whether I have an issue or not, but:
1) CUDA acceleration is enabled. So we're OK in this.
2) When I assemble a few clips together, although the render line is yellow, after a few seconds, the videos start becoming choppy. So, I was wondering how can this because I am only editing a 720p timeline and I have not graded anything yet. Just warp stabilizer on some clips and some of them (since I shot at 60p) are slowed down to 24p.
3) When I run GPU-Z, I am only seeing a 8-15% GPU load rate.
4) Because I can't reverse time and stabilize at the same time, I stabilized a clip on another sequence and then nested that sequence in my main sequence. Now, when I reverse that nested sequence...I get a blank screen UNLESS I kill the hardware acceleration and switch to CPU only (this seems to be a Premiere Pro issue)
5) I did everything possible to make sure that the Quadro card was working. I turned everything to "Performance NVIDIA graphics) in the NVIDIA control panel. I installed the latest drivers from NVIDIA the day before yesterday. I even flashed my BIOS to the latest downloadabale from Lenovo's System Update.
Am I missing something? Or is the card just underclocked and under-powered on purpose? Why can it not run at beyond 15% load when the clips are choppy on playback?
You may noticed I am a bit frustrated...but hey...I love the machine so I hope I am missing something that I can set up to make it all run smoothly again.
Many thanks for any ideas, guidance.
PS: All captured clips are in the 1st HDD on the main bay and the scratch/preview disk is the 2nd HDD on the CD drive. Premiere is running from the mSATA SSD (Plextor M5M 256GB)
Solved!
Go to Solution.

I don't have Premiere, so I can't see by comparison what happens on my own W530 which only has a K1000m. I also don't know if your symptoms are due to hardware or sofware (i.e. Premiere itself). Do you have another machine of your own to try the same experiment against, to see what GPU usage measures at and whether the visual results are seemingly as poor as you describe on your W530, or are they much better visual results and much higher performing as measured?
Aside from our both doing something in common, to compare results, I just took a look at two video applications on my own W530: (a) VideoReDo TV Suite 5 editing both 720p and 1080i copy-freely WTV recorded videos made by Windows Media Center (on my HTPC), and (b) Windows Media Center running on the W530 and playing both of these 720p and 1080i WTV recordings. I opened GPU-Z while the video apps were running to monitor the GPU load. I also have Aida64 running, which also displays presumably the same "GPU utilization". I expect VRD to use less GPU horsepower than Windows Media Center uses.
Also, here is my Lenovo Power Manager setup, with my i7-3720QM 8GB W530/K1000m 512GB Samsung 840 Pro SSD powered into the wall. The display is external 24" Eizo S2433W monitor (miniDP->DP from the W530), 1920x1200, laptop screen OFF. I'm running "discrete graphics" in the BIOS, using "retail" nVidia driver 347.88.
And here's Windows Media Center playing a 1080i video (which involves hardware de-interlacing), and showing 57% GPU load through GPU-Z. Note that with Aida64 (on the right side of the image) it also shows 55% GPU utilization, so this number is clearly correct.
And the same clip being "edited" using VideoRedo. Note that GPU usage is now down to 35% (at least at this instant), as I expected. I'm quite sure hardware de-interlacing is also taking place.
Video performance with both apps is superb.
Anyway, without our being able to duplicate the other's test situation, I don't know what to suggest that you haven't already done. Unfortunately I don't have Premiere to try.

Can't go through installing drivers (Win 8)

Ok I got my MBP 13.3 yesterday. Went through the Boot Camp assiatsnt, followed everything on the guide, installed Windows 8 (not yet 8.1).
Windows 8 ''almost work'' except I do not have all required drivers (for instance, wi-fi is not an option - I can only connect with ethernet cabled connection).
I wanted to go through re-installing Windows 8 because I have a double issue here : I will need to spend time over the phone with Microsoft since thsi is a key I had on another (crashed) laptop. So if things have to be re-done, I don't want to call them twice...
1) When I first installed throigh BootCamp assiatant, I unchecked the ''download Windows drivers'' (second) oprtion. I have the Win 8 DVD , I had downloaded the (wrong version - now I know) of BootCamp drivers (just been told when I tried to install manually under Windows,...)
2) I redownloaded the version of Boot Camp (5.1.5640) nd unpacked, copied to a USB key then once I launched setup, I was told this is not for **this computer** (a Macbook Pro mid-2012 (model A1278). So I went through litterature again and understood I needed BootCamp 5.1.5621 (based on my model). I downloaded it.
3) Followed : http://support.apple.com/kb/DL1720 (I think ''carefully'') - but now when I launche the ''Settup.exe'' I am getting the (extremely frustrating after a day) message : ''The SWinPEDriver5 folder was not found. Please verify the SWinPEDriver folder is in the same location as the BootCamp folder and try the installation again''. (Ok please read twice below: Do you read the **first** folder now appearing **there** ?) - Well I made sure that SWinPEDriver5 was copied in the root of the USB stick. Here are the elements showing there:
- SWinPEDriverS (folder)
- Drivers (folder)
- AutoUnattend (document)
- BootCamp (document)
- Setup (application)
- AppleBluetoothBroadcom64 (folder which I have recopied from the content of the first, as Setup did not seem to see it..... But to no avail)
- IntelHDGraphics64 (folder which I have recopied from the content of the first, as Setup did not seem to see it..... But to no avail)
Only reply I am getting from Apple Care is to...contact Microsoft... But hey: BootCamp is an Apple product, right ? And since I probably first need to activate Windows (thus spend an hour over the phone...) I can't call MS support !!.... Chicken and egg...
Spent my entire day on this...
What is it I might be missing here ?
(Please note that I also intend to update Windows to 8.1 .... so any shortcut here would be very appreciated, if I am going to need an update to these drivers....
Thanks in anticipation guys.
Rob

A few hours later....
Now, i have decided to go back : from Mac OSX I have opened BootCamp and chosed to uninstall Windows 8 and go back to a unique partition, prior to start everything from scratch....
Now guess what: starting from scratch, once I get to the point to choose the 2 options (download latest drivers + install Windows 7 or more), I get a new prompt that ask my password to ''provide a new tool''.... But as I continue (with WIn 8 disk in the mac and empty USB key in the slot, I now get a message that this mac can ''only install Windows 7'' !!!!.....
Based on litterature, Macbook Pro mid-2012 **can** install up to Windows 8.1 - this should not be an issue !...
Have I been shipped a lemon ??

Missing Bluetooth Drivers - Win 7 64-bit

Trying to connect my Samsung Note 3 phone to my Lenovo Thinkpad W520 using Bluetooth. I get the message that three of the drivers cannot be found on Windows Update. Tried installing the latest Bluetooth drivers from the Lenovo Support site with no change in the error. Tried removing and reconnecting the device, no change. Cannot connect to this Bluetooth device:
ThinkPad Bluetooth with Enhanced Data Rate Software for Windows 7 (32-bit, 64-bit) -
ThinkPad . Version: 6.5.1.4500
ThinkPad Bluetooth with Enhanced Data Rate Software Read me Windows 7 32bit Windows 7 64-bit 21 Feb 2014
Here's details:
Devices and Printers
Publisher details
Issues found
Bluetooth Peripheral Device doesn't have a driver
There is no driver installed for Bluetooth Peripheral Device. Not fixed
Apply solution for driver problem Completed
Install a driver for this device Completed
Bluetooth Peripheral Device doesn't have a driver
There is no driver installed for Bluetooth Peripheral Device. Not fixed
Apply solution for driver problem Completed
Install a driver for this device Completed
Bluetooth Peripheral Device doesn't have a driver
There is no driver installed for Bluetooth Peripheral Device. Not fixed
Apply solution for driver problem Completed
Install a driver for this device Completed
Problem with PnP devices
There are problems with some PnP devices.
Potential issues that were checked
Windows Update configured to never install drivers: Issue not present
Issues found
Detection details
Bluetooth Peripheral Device doesn't have a driver Not fixed
There is no driver installed for Bluetooth Peripheral Device.
Device information Name: Bluetooth Peripheral Device ID: BTHENUM\{42904A5C-F3AF-4F83-945F-38858025A5D2}_VID&00010075_PID&0100\8&FA19813&0&1CAF056ABA5D_C00000001 Error code: 28
Apply solution for driver problem Completed
Follow the instructions in the solution to address the driver problem.
Install a driver for this device Completed
The driver for Bluetooth Peripheral Device is not installed.
Install the latest driver for the device.
Bluetooth Peripheral Device doesn't have a driver Not fixed
There is no driver installed for Bluetooth Peripheral Device.
Device information Name: Bluetooth Peripheral Device ID: BTHENUM\{936DA01F-9ABD-4D9D-80C7-02AF85C822A8}_VID&00010075_PID&0100\8&FA19813&0&1CAF056ABA5D_C00000001 Error code: 28
Apply solution for driver problem Completed
Follow the instructions in the solution to address the driver problem.
Install a driver for this device Completed
The driver for Bluetooth Peripheral Device is not installed.
Install the latest driver for the device.
Bluetooth Peripheral Device doesn't have a driver Not fixed
There is no driver installed for Bluetooth Peripheral Device. Device information Name: Bluetooth Peripheral Device ID: BTHENUM\{B3093027-F77A-4C37-860A-6502360DDA76}_VID&00010075_PID&0100\8&FA19813&0&1CAF056ABA5D_C00000001 Error code: 28
Apply solution for driver problem Completed
Follow the instructions in the solution to address the driver problem.
Install a driver for this device Completed
The driver for Bluetooth Peripheral Device is not installed.
Install the latest driver for the device.
Problem with PnP devices Detected
There are problems with some PnP devices.
Windows will take additional steps to further troubleshoot these devices.
Potential issues that were checked
Detection details
Windows Update configured to never install drivers Issue not present
Detection details
Collection information
Computer Name: WABELHLP0532800
Windows Version: 6.1
Architecture: amd64
Time: Friday, July 11, 2014 2:12:48 PM
Publisher details
Devices and Printers
Troubleshoot problems with devices and printers.
Package Version: 1.1
Publisher: Microsoft Windows
Devices and Printers
Troubleshoot problems with devices and printers.
Package Version: 1.0
Publisher: Microsoft Corporation
Hardware and Devices
Use hardware and access devices connected to your computer.
Package Version: 1.1
Publisher: Microsoft Windows
Windows Network Diagnostics
Detects problems with network connectivity.
Package Version: 1.0
Publisher: Microsoft Windows
Printer
Troubleshoot problems preventing printing from completing.
Package Version: 1.0
Publisher: Microsoft Windows

What are you trying to accomplish? Why do you want to connect your Note to the W520?
I have a W530 and know nothing about the W520, so if there are relevant differences I know nothing about them. My discussion will be about the W530 and you'll have to know or determine that what I'm saying for the W530 is inapplicable to your W520.
Anyway, I have no problem setting up my W530 to be a "WiFi Hotspot", which my Samsung Galaxy S4 phone can then locate with its WiFi scannng... not BlueTooth. So if I want to use Internet access capability provided by the W530 as WiFi connection (not BlueTooth) for the phone, I can do that.
Of course I can also configure my phone to just connect to the wireless router in my home, again using WiFi in the phone (not BlueTooth). This is essentially the same effect as having the phone go through the W530 and then through therouter, except in this setup the phone goes directly to the router to get to the Internet.
Is that all you're trying to accomplish... getting Internet WiFi access for your Note via your W520's internet connection?
Or are you wanting something else... such as accessing the storage on your Note using Windows Explorer on the W520? That's a different type of connection, which requires drivers installed on Windows to support MTP device connections, which is how the phone connects when using a USB cable. This is not BlueTooth connection (e.g. when your phone connects to your car's BlueTooth system), but rather a plain MTP connection via USB (e.g. same as many digital cameras connect when you plug them into a USB port on the computer).
I have installed a product named PdaNet+FoxFI to provide MTP driver support (via USB cable) to Windows. PdaNet+ also provides BlueTooth connection between phone and W530. PdaNet+ also supports WiFi Hotspot on the phone without requiring a $20/month service charge by Sprint. There is a component that gets installed on the PC, and a second Android app that gets installed on the phone. Once everything is installed in both places and everything is setup properly and configured correctly, there are two basic functions that are now enabled when the phone is conncted to the W530 via USB cable:
(1) the phone shows up in Windows Explorer, and its internal phone and external card storage are both visible directly for drag/drop, move/copy, etc. functionality of Explorer
(2) The internet connection of the phone is made available to the W530 via the USB cable (i.e. "USB tethering"), thus making the phone's Internet connection be usable by the W530... through the USB cable connection. The phone can be getting to the Internet either through external service provider (e.g. 3G/4G from Sprint), or via WiFi (e.g. through home LAN wireless router), and however the Internet is reached that becomes the pathway for the W530 to connect (through the USB tethering connection to the phone, which is functionally just another network connection like home wired or wireless or general WiFi).
Note that the PdaNet+ software also supports connecting the W530 to the phone via BlueTooth, but I honestly don't know why that would be of value It's certainly not the same as an MTP connection which supports Explorer being able to see the internal/external storage on the phone. I've not been successful in getting things configured with BlueTooth connection so that I can get the phone to have Internet access through the W530, or the W530 to have Internet access through the phone... when they are connected via BlueTooth. This has only worked when using either (1) USB cable connection from phone to W530, or (2) WiFi from phone to the WiFi hotspot of the W530.
So... again, what are you trying to do between your Note and your W520? BlueTooth may be the wrong approach, and/or PdaNet+FoxFI may be your best solution.

Elitebook 8560p Drivers (Win 8.1 & Win 10)

Hello, I just did a fresh Win 10 install on my Elitebook 8560p. I am struggling a bit wit the drivers. I am combinig some Win8, Win8.1 drivers and also drivers from Elitebook 8570p.Last year I have installed Win 8.1 on the laptop and everything worked.Now I want to try the same with the Win10 but there are allot of drivers missing from the download page (that were there, but are now gone). What happened to them?!I am missing: - Intel Management Engine Interface (MEI) Driver
- Validity Fingerprint Sensor Driver (International)
- Synaptics TouchPad Driver (International)
- Alcor Micro Smart Card Reader Driver (International)
- HP 3D DriveGuard Software
- JMicron Media Card Reader Driver
- Intel Rapid Storage Technology Driver
- HP PC Hardware Diagnostics UEFI
- HP UEFI Support Environment (International) I can manage without the graphics card driver, Intel Chipset driver, those I can get from the manufacturers website.Also there are some drivers that were installed with the Windows Update. But I am still missing allot of drivers that are needed for proper functionality... Can anyone please shed some light on the situation?What is the HP policy with the support for the later hardware and the new OS (Win10)? Best regards,Vedro

Hi: The product specs for your PC indicate that it comes with wireless networking only without bluetooth. http://support.hp.com/us-en/product/HP-Pavilion-p6-2300-Desktop-PC-series/5295969/model/5296959/document/c03500805/ If you have the wireless card pictured on the above link (RT5390) that card is not a combination wireless/bluetooth card.

Need drivers Win 7 Pro 32bit

Hello,
I just installed Win 7 32 bit and realized that some of the drivers are missing and can't be found on internet.
These are the drivers I need:
PCI Device: PCI \ VEN_10EC DEV_5299
Ethernet controller: PCI \ VEN_10EC DEV_8136
Network controller: PCI \ VEN_168 DEV_0032
SM Bus controller: PCI \ VEN_1022 DEV_780B
Can someone assist me?
Thank you in advance.
Ferry
This question was solved.
View Solution.

Hi
This is the page for all the sytsem drivers for Win 7 32bit for your machine
http://support.hp.com/us-en/product/HP-1000-Notebook-PC-series/5343010/model/7049601/drivers
Checkurtech
****Click the White Kudos star to say thanks****
****Please mark Accept As Solution if it solves your problem****

Mac Mini video card drivers Win 7 64 bit sp1

I was running OSX 10.6.4 and dual booting with Vista 64 bit when Vista crashed. I went out and purchased Win 7 64 bit SP1 OEM version. I used bootcamp to install this sucesfully but whatever I seem to try I cannot find/install the correct driver for the graphics card in Win 7. It still defaults to Standard VGA Graphics Adapter 1280 x 1024.
I moved from the U.S to Thailand but forgot to bring my bootcamp disc (Otherwise I might not even be writing this post). I purchased a copy of Snow Lepoard 10.6.3 which has bootcamp 3.1 on it but still not the correct video card drivers. I have also upgraded bootcamp to 3.2 and 3.3 and tried all the Win 7 updaates but to no avail. I have tried to install manually from bootcamp on the DVD, I have read a few forums with the same issue but it tends to be a MacBook Pro and not a Mac Mini issue. I have also instaleld Nvidia 285.38 and 285.62 drivers and both of these give me a black screen, so I know these are not the correct drivers.
I purchased my Mac Mini in Nov of 2010 and its a model MC270LL/A. If I look in OSX I can see my video card is the
Nvidia Geforce 320 M
Vendor - NVIDIA (0x10de)
Device ID 0x08a4
Revision ID 0x00a2
Rom Revision 3546.
I am not sure why this has to be so difficult but it is! Any help would be appreciated. Thanks so much.

There's a complicated driver issue.
I'm also a user of Mac mini(2010, server) with windows7 x64.
My experience is:
The only newest nvidia driver for daily using without trouble is 267.76.
If you want to use 27x~ 285.62/285.79,
your primary monitor must be connected to Mac mini with miniDisplayPort-VGA adapter,
I got the same black screen with applying HDMI port as primary.
If you upgrade to 290.36/295.51(the latest one),
you can prevent black screen with HDMI port,sounds good,right?
But as long as you update to any of the newest two drivers,
you will suffer BSOD(Blue Screen of Death, abnormally reboot, error code:0x116) during checking Windows index
or just watching HD movies, that anything may cause GPU malfunction.
Referece thread:http://forums.nvidia.com/index.php?showtopic=215256
I still searching the solution because the HDMI 1.4a 3D supporting of my projector was begun from 285.62.
I always got BSOD when I want to enjoy Blu-ray 3D films.

Satellite L850-138: Drivers Win 7 - Problems with keyboard hotkeys

Hi guys. I made a clean installation of windows 7-64bits on Toshiba L850-138.
I downloaded the 51 drivers from here:
[Satellite L850-138 drivers|http://www.toshiba.es/innovation/jsp/autoDetect.do?service=ES&ACTION=PROCESS_DETECTION& TYPE=FORWARD&SOURCE=SMP&COUNTRY=217&QSA=TRUE&MODEL =SATELLITE+L850-138&SERIAL=5C205022R&service=ES&LOCALE=&OSBUILD=76 00&SUB_TYPE=SMP&OSBITSIZE=64&PANUMBER=PSKDLE-01S002CE&ERROR=0]
Problem: Can not get it to work keyboard hotkeys. The main ones are:
* Brightness + / - (F2, F3)
* Volume + / - (F9, F10)
* Switch between wireless devices (F12)
* Sound toggle (F11)
Is there a driver or specific drivers package to enable this feature? What is it?
The complete list of drivers is this
Bios
Blue ray disc player
card reader
chipset utilityapid storage technology driver
display driver
eco utility
Hardware setup
HDD SDD Alert utility
Intel Management engine interface
Lan driver
Wireless lan driver
wireless display
Bluetooth drivers (bluetooh monitor, bluetooth stack and bluetooth filter driver)
USB driver
Touch pad driver
webam driver
Media controller
Network device id registry setting tool
registry patch
Sound driver
Disk creator
Pc health monitor
Play Ready PC runtime
Resolution+ Plugin
Service station
Sleep utility
Supervisor password utility
Toshiva audio enhancement
TEMPRO
Online product information
Toshiba places icon utility
Toshiba recovery media creator
Toshiba hardware setup
Toshiba assist
Toshiba service (toshiba service place link)
Value added package:
- TOSHIBA Components Common Driver
- TOSHIBA Utilities
- TOSHIBA Password Utility
- TOSHIBA Flash Cards
- TOSHIBA PC Diagnostic Tool
So far I've only installed the main drivers. They are:
[q]
Lan driver
AMD display driver
Win 7 Sp1
Intel chipset device software (Chip Set Utility)
Rapid storagee
Realtek audio
ATI audio
Synaptics touch pad driver
wireless driver atheros.
intel usb driver.
media controller y plugin
patch files + network device ide net
hardware setup
play ready
resolution+ plugin media player
webcam driver
toshiba assist
wireless display
sleep utility
Hd alert utility
enhancer audio
Service station
[/q]
I do not want to install everything. I just want to install the basics for my system to work. What are the drivers of the hotkeys?
Thanks in advance.

Perfect!, that was, concrete must be installed TOSHIBA Flash Cards, and I guess TOSHIBA Components Common Driver.
Flash cards: (AKA Hot Keys Fn Keys)
Here is all the information:
http://forums.toshiba.com/t5/General-Features-Knowledge-Base/TOSHIBA-Flash-Cards-AKA-Hot-Keys-Fn-Keys-Operation/ta-p/336470
Finally, of the list of drivers that I put, what should I install to complete the clean install?
Thank you very much friend. :)

Satellite Pro 4200: Cannot install the correct graphics drivers Win ME

Hi,
I have just re-installed Windows ME on the Satellite Pro 4200 machines but I do not seem to be able to install the correct graphics/diplay drivers. Can anyone help
Thanks
Steve
Message was edited by: skc1959

Hi
What graphic card was installed in this oldie???
I dont think that Toshiba provides any Win ME drivers for this unit and therefore you should Google in the internet for graphic driver.
Good luck

T61p: SATA (AHCI) & ATA drivers, Win. 7 64-bit?

I have a T61p running Windows 7 Professional 64-bit. ThinkVantage System Update recommends that I install the “Intel Matrix Storage Manager driver for Windows 64bit”, version v8.9.2.1002, which it tells me has not been previously installed. When I try to do so, it tells me that the installation has failed.
Notes with this driver indicate that it works with the following controllers:
Intel(R) 82801HEM/HBM SATA AHCI Controller
Intel(R) 82801GBM SATA AHCI Controller
Intel(R) ICH9M-E/M SATA AHCI Controller
Intel(R) ICH8M-E/ICH9M-E/M SATA RAID Controller.
However, my machine’s Device Manager shows that it (at least thinks) it has the following controllers:
Intel(R) ICH8M SATA AHCI Controller – 2829 with an Intel driver, version 7.0.0.1013, dated 2010/06/08
Intel(R) ICH8M Ultra ATA Storage Controllers - 2850 with a Microsoft driver, version 6.1.7601.17514, dated 2006/06/21
(and ‘ATA channel’ controllers and the Ricoh card reader, etc controller). So perhaps it’s not surprising that ThinkVantage System Update gets confused.
I’m bothered by this because I’m about to upgrade the original Hitachi Travelstar 160 GB primary HDD with a Seagate Momentus XT 750 GB hybrid hard drive, and I would like my machine to have the most up-to-date driver for its AHCI controller. (I’m not planning a RAID configuration, but I want the best shot at getting NCQ working* and avoiding problems with matching 6 Gb/s to 1.5 Gb/s SATA speeds.)
So my question is: How can I ensure I have the latest drivers for these controllers? A Google search yields conflicting information...
I would be very grateful for any responses.
(*Apparently, “Windows Vista and Windows 7 also natively support AHCI, but their AHCI support (via the msahci service) must be manually enabled via registry editing if controller support was not present during their initial install.”)
Best regards,
Cian Buckley

Hello,
My understanding (and I'm sure someone will correct me if I'm wrong) is that all ThinkPad T61p's use Intel's 965 chipset.
The latest chipset device drivers are v9.3.1.1019 and available from here on Intel's support site.
The latest storage device drivers are b10.8.0.1003 and available from here on Intel's support web site.
Regards,
Aryeh Goretsky
I am a volunteer and neither a Lenovo nor a Microsoft employee. • Dexter is a good dog • Dexter je dobrý pes
S230u (3347-4HU) • X220 (4286-CTO) • W510 (4318-CTO) • W530 (2441-4R3) • X100e (3508-CTO) • X120e (0596-CTO) • T61p (6459-CTO) • T43p (2678-H7U) • T42 (2378-R4U) • T23 (2648-LU7)
Deutsche Community Comunidad en Español Русскоязычное Сообщество

Quadro K2000m drivers Win 8.1 W530

Similar Messages

Maybe you are looking for