Qualifications - Report about expiration in advance

Hi experts,
is there a report in HR which displays me qualifications, which will expire?
I mean a report where I can enter "days in advance" and I get listed all persons and qualifications which will expire?
Kind regards

Hi Christian, Report S_AHR_61015536 (Expired or Expiring Qualifications) should work ... input the date range on the report parameters screen and it will reduce the hits according to the date range. The date range input will impact your results by "end date" - when they expire.
If you don't see any data, perhaps take a look at your security? We use it often.
Good luck
Connie

Similar Messages

Expired Qualifications Report

Good morning
I have just been looking at the "Expired Qualifications" report S_AHR_61015536 and when I run it all I get is a list of org units with their names but no details of which qualifications have expired, when , who has them etc. Am I doing something wrong or is that how the report works?
Many thanks
Dawn

Hi Scott,
This same issue was happening with me and I did what you said and exported the report to Excel. It worked perfectly.
The issue I'm now having is when I schedule the report to execute in the background. The report runs initially and then fails and the status changes to canceled. What I'm noticing is that I run report S_AHR_61015536 - Expired Qualifications but when I check the status of that report using transaction SM37 - Overview of job selection, the report displaying in the job section is report RHXPE_EXPIRED_QUALI. I tried this transaction in easy access and it doesn't exist.
Do you know why the report S_AHR_61015536 - Expired Qualifications is cancelling when trying to excute it in the background?

HR REPORT about GET PAYROLL ISSUE!

HI
i using LDB pnp to report about PY data!
i get PY data using GET PAYROLL!
one case occurs as follow:
search one person(99005500) using personid number i will get result ok!
all other condition not change! just in personid(pernr-pernr) condition, i put mass person id!
in these person, some id < 9900500, in this time, the person id 99005500 some period py data
can't display out!
i have to check period list using call method pay->read_result
                                                       IMPORTING
                                                             list = mylist. in GET PERNR !
i find mylist have different!
in first scene:
    mylist data contain all data about this person: begin with 20060110
but in last scene:
    mylist data contain data just begin with 20080804
so i think miss py data cause by mylist change !
i in SAP demo code:EXAMPLE_PNP_GET_PAYROLL i have saw:
You can use the methods of class "pay" to read and modify
the list of payroll result that is going to be processed at
the <get payroll> event. However, these method calls might
change with the next release.
CREATE OBJECT pay.
pay->LDB = 'SAPDB_MY_OWN_LDB'. "only if you copied the LDB PNP
CALL METHOD pay->read_result IMPORTING list = mylist.
"delete mylist index 2. "For example: Remove an unwanted payroll result
CALL METHOD pay->write_result EXPORTING list = mylist.
what happend in LDB PNP! how to get mylist i want?
because using CALL METHOD pay->read_result IMPORTING list = mylist. will cause error!
help!!!!!!!!!!!!!!
thank you advance!

Hi,
Refer this link https://www.sdn.sap.com/irj/scn/weblogs?blog=/pub/wlg/3180. [original link is broken] [original link is broken] [original link is broken]
Regards,
Flavya

Query , logical DB or report about plan maintenance and functional location

Hi,
I've to do a report about a list of plan maintenance. I've to show the functional location affected by the plans but in the table MPOS the field TPLNR doesn't exist.
But I have maintenance plans that affects to functional location only. I've not found any useful logical database or report to show this information.
Could anybody help to me?
Thanks
Best Regards

Dear
The SAP is provded the option please check once again
Table MPOS- Field ILOAN
First take the ILOAN from ILOA table by object reference is 2 (Field: OWNER) in output.
Then put the Loc/acct assignment value at input of the MPOS table which is u received from ILOA table

Event 4999 - Watson report about to be sent for process id: 27244 on Mailbox Server every five minutes

On one of my DAG enabled Exchange 2013 mailbox servers, I get this error in event viewer every five minutes:
Log Name: Application
Source: MSExchange Common
Date: 6/25/2014 10:49:46 AM
Event ID: 4999
Task Category: General
Level: Error
Keywords: Classic
User: N/A
Computer: mailboxserver
Description:
Watson report about to be sent for process id: 27244, with parameters: E12IIS, c-RTL-AMD64, 15.00.0913.022, M.E.RpcClientAccess.Service, unknown, M.E.R.S.U.DatabaseInfo..ctor, System.NullReferenceException, aba8, unknown.
ErrorReportingEnabled: True
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="MSExchange Common" />
<EventID Qualifiers="16388">4999</EventID>
<Level>2</Level>
<Task>1</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2014-06-25T17:49:46.000000000Z" />
<EventRecordID>687360</EventRecordID>
<Channel>Application</Channel>
<Computer>mailboxserver</Computer>
<Security />
</System>
<EventData>
<Data>27244</Data>
<Data>E12IIS</Data>
<Data>c-RTL-AMD64</Data>
<Data>15.00.0913.022</Data>
<Data>M.E.RpcClientAccess.Service</Data>
<Data>unknown</Data>
<Data>M.E.R.S.U.DatabaseInfo..ctor</Data>
<Data>System.NullReferenceException</Data>
<Data>aba8</Data>
<Data>unknown</Data>
<Data>True</Data>
<Data>False</Data>
<Data>Microsoft.Exchange.RpcClientAccess.Service</Data>
<Data>
</Data>
</EventData>
</Event>
Everything is working ok, but I'm concerning that I"m seeing this.
ST

Amit,
I don't see the same type of 4999 error every five minutes anymore. It only get the 4999 error about 3 times a day. I get one with the same ID and other completely different process ID. The error is below:
Log Name: Application
Source: MSExchange Common
Date: 7/2/2014 6:01:36 AM
Event ID: 4999
Task Category: General
Level: Error
Keywords: Classic
User: N/A
Computer: computer
Description:
Watson report about to be sent for process id: 13152, with parameters: E12, c-RTL-AMD64, 15.00.0913.022, w3wp#MSExchangeOWAAppPool, M.E.Data.ApplicationLogic, M.E.D.S.GccUtils.GetClientIPEndpointsFromHttpRequest, System.NullReferenceException, 868, 15.00.0913.017.
ErrorReportingEnabled: True
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
<Provider Name="MSExchange Common" />
<EventID Qualifiers="16388">4999</EventID>
<Level>2</Level>
<Task>1</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2014-07-02T13:01:36.000000000Z" />
<EventRecordID>825358</EventRecordID>
<Channel>Application</Channel>
<Computer>computer</Computer>
<Security />
</System>
<EventData>
<Data>13152</Data>
<Data>E12</Data>
<Data>c-RTL-AMD64</Data>
<Data>15.00.0913.022</Data>
<Data>w3wp#MSExchangeOWAAppPool</Data>
<Data>M.E.Data.ApplicationLogic</Data>
<Data>M.E.D.S.GccUtils.GetClientIPEndpointsFromHttpRequest</Data>
<Data>System.NullReferenceException</Data>
<Data>868</Data>
<Data>15.00.0913.017</Data>
<Data>True</Data>
<Data>False</Data>
<Data>w3wp#MSExchangeOWAAppPool</Data>
<Data>
</Data>
</EventData>
</Event>
Going to keep an eye on it, but its not causing any issues.
ST

Cannot select the "submit crash reports" in the Options-Advanced-General box: the tick in the box is absent on restart

Cannot select the "submit crash reports" in the Options-Advanced-General box: the tick in the box is absent on restart

See:
*http://kb.mozillazine.org/Breakpad#Mozilla_Crash_Reporter
You can check if you have write permission for this registry key:
*HKEY_CURRENT_USER\Software\Mozilla\Firefox\Crash Reporter\SubmitCrashReport

I need report about office 2010 licensed or not

hi,
I need to make report about microsoft office 2010 licensed, activated or not on all pc's, how can i generate it or make my custom collection and query ?
any help !!
Ahmed Sherif

One of doing this would be to use Compliance Settings.
With the information found here:
http://blogs.technet.com/b/odsupport/archive/2010/08/11/how-to-check-the-activation-type-and-status-of-office-2010-installations.aspx
You could create a script that you combine with Compliance Settings and use the information returned by Compliance Settings (Compliant or Non-compliant) to create a Query or a report.
You might have a look at Asset Intelligence classes i.e SoftwareLicensing,
or a third option could be to see whether the information exits in WMI (I have never looked for it myself)

A report about reachable devices in LMS report tools

Hi all,
is possible to display a report about reachable devices in DCR database? The report about unreachable devices is only in the reports menu in LMS 4.2.4 (Reports > Inventory > Management Status >Unreachable Devices).
I tried to use the report designer, but there is no possibility to create a rule for this report.:-( Similarly I tried to create group devices, but I didn't find some criteria for this type of group. Thanks.
Roman

Hi Roman,
As per my knowledge , there is no such report available in LMS, however I would suggest you to create a POLLER for DEVICE AVAILBLITY to achive your goal.
Go to Monitor > Performance Settings > Setup > Pollers >> click Create Poller.
check the below link for more information:
http://www.cisco.com/en/US/docs/net_mgmt/ciscoworks_lan_management_solution/4.2/user/guide/lms_monitor/mnt-perf.html#wp1542387
Thanks-
Afroz
[Do rate the useful post]

HT4528 On the TV news was a report about Apple iPhones and iPads that they were unsecure. What does applet recommend

On the TV news was a report about Apple iPhones and iPads were unsecure. Has apple adressed this? What does apple recommend?
to fix this problem.
I get email from Contacts in my address book. The email is not really from them. Is this the issue at hand?

Tee Man wrote:
On the TV news was a report about Apple iPhones and iPads were unsecure. Has apple adressed this? What does apple recommend?
to fix this problem.
The latest version of iOS (7.0.6) fixes the problem. Update your phone if you're not already running 7.0.6.
I get email from Contacts in my address book. The email is not really from them. Is this the issue at hand?
No. That has nothing to do with it. That's called "spam".

Where do i go if i want to file a report about a game on the app store? Who can I talk to to file a report?

Where do i go if I want to file a report about a game on app store ? Who can I contact to help me ? I tried the conceptor of the game but no answer there . I need help !

FOR ASSISTANCE WITH ORDERS - iTUNES STORE CUSTOMER SERVICE
For assistance with billing questions or other order inquiries, please refer to our online support page by clicking here: http://www.apple.com/support/itunes/store/. If you cannot find the answers you are seeking in our robust knowledge base, you can contact us by visiting the following URL http://www.apple.com/support/itunes/store/, clicking on the appropriate Customer Service topic, then using the contact button or email form at the bottom of the page. Responses to emails will be provided as soon as possible.
Phone: 800-275-2273 How to reach a live person: Press 0 four times
Hours of Operation: Mon-Fri: 9am-5pm ET
Email: [email protected]
How to report an issue with Your iTunes Store purchase
http://support.apple.com/kb/HT1933
How to Get a Refund from the App Store
http://gizmodo.com/5886683/how-to-get-a-refund-from-the-app-store
Canceling a Digital Subscription
http://gadgetwise.blogs.nytimes.com/2011/10/14/qa-canceling-a-digital-subscripti on/
 Cheers, Tom

What to do about "expired certificate"?

what to do about "expired certificate"?

Did you try a Google search? Plenty of instructions to be found.

Exchange 2013 - Event ID 4999 MS Exchange Common - Watson report about to be sent for process id: 5816

Hi,
We have a single Exchange 2013 server and are getting this error many times in a day. I haven't been able to find a solution and was wondering if anyone came across this error or have any suggestions.
Edition : Standard
AdminDisplayVersion : Version 15.0 (Build 913.22)
Watson report about to be sent for process id: 5816, with parameters: E12IIS, c-RTL-AMD64, 15.00.0913.022, M.Exchange.Imap4, M.Exchange.Net, M.E.N.NetworkConnection.BeginNegotiateTlsAsClient, System.InvalidOperationException, 99a4, 15.00.0913.007.
ErrorReportingEnabled: True
Thanks
Amit

We have exchange 2013 cu6 mailbox server and we keep getting the below event error message
Log Name:      Application
Source:        MSExchange Common
Date:          10/2/2014 1:06:25 PM
Event ID:      4999
Task Category: General
Level:         Error
Keywords:      Classic
User:          N/A
Computer:
Description:
Watson report about to be sent for process id: 30632, with parameters: E12, c-RTL-AMD64, 15.00.0995.029, M.E.RpcClientAccess.Service, M.E.Data.ApplicationLogic, M.E.D.A.U.HttpPhotoRequestBuilder.Build, System.NotSupportedException, 4e29, 15.00.0995.027.
ErrorReportingEnabled: True
Event Xml:
< Event xmlns="">
<System>
    <Provider Name="MSExchange Common" />
    <EventID Qualifiers="16388">4999</EventID>
    <Level>2</Level>
    <Task>1</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2014-10-02T20:06:25.000000000Z" />
    <EventRecordID>7826297</EventRecordID>
    <Channel>Application</Channel>
    <Computer></Computer>
    <Security />
</System>
<EventData>
    <Data>30632</Data>
    <Data>E12</Data>
    <Data>c-RTL-AMD64</Data>
    <Data>15.00.0995.029</Data>
    <Data>M.E.RpcClientAccess.Service</Data>
    <Data>M.E.Data.ApplicationLogic</Data>
    <Data>M.E.D.A.U.HttpPhotoRequestBuilder.Build</Data>
    <Data>System.NotSupportedException</Data>
    <Data>4e29</Data>
    <Data>15.00.0995.027</Data>
    <Data>True</Data>
    <Data>False</Data>
    <Data>Microsoft.Exchange.RpcClientAccess.Service</Data>
    <Data>
    </Data>
</EventData>
< /Event>
Services seem to be fine (Via test-servicehealth), but i do have a group of users that complain that their outlook 2013 email clients will go non-responsive a few times a days. Wondering if this is related. Also this error is appearing every few minutes.
Anyone else experiencing this?

Dr. Watson report about to be sent

I have been searching the net for this specific event and can't seem to find anything on it. I can find 4999 errors but not this one. Does anyone know what this is referring to or where I can find the explanation.
Log Name:      Application
Source:        MSExchange Common
Date:          3/11/2015 12:45:38 PM
Event ID:      4999
Task Category: General
Level:         Error
Keywords:      Classic
User:          N/A
Computer:      server.domain.com
Description:
Watson report about to be sent for process id: 19568, with parameters: E12, c-RTL-AMD64, 15.00.1044.025, w3wp#MSExchangeSyncAppPool, M.E.Data.Storage, M.E.D.S.FolderSync.QueueDelayedServerOperation, System.InvalidOperationException, 9ff7, 15.00.1044.022.
ErrorReportingEnabled: False
Event Xml:
<Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
<System>
    <Provider Name="MSExchange Common" />
    <EventID Qualifiers="16388">4999</EventID>
    <Level>2</Level>
    <Task>1</Task>
    <Keywords>0x80000000000000</Keywords>
    <TimeCreated SystemTime="2015-03-11T16:45:38.000000000Z" />
    <EventRecordID>3302516</EventRecordID>
    <Channel>Application</Channel>
    <Computer>server.domain.con</Computer>
    <Security />
</System>
<EventData>
    <Data>19568</Data>
    <Data>E12</Data>
    <Data>c-RTL-AMD64</Data>
    <Data>15.00.1044.025</Data>
    <Data>w3wp#MSExchangeSyncAppPool</Data>
    <Data>M.E.Data.Storage</Data>
    <Data>M.E.D.S.FolderSync.QueueDelayedServerOperation</Data>
    <Data>System.InvalidOperationException</Data>
    <Data>9ff7</Data>
    <Data>15.00.1044.022</Data>
    <Data>False</Data>
    <Data>False</Data>
    <Data>w3wp#MSExchangeSyncAppPool</Data>
    <Data>
    </Data>
</EventData>
</Event>

Hi,
Thank you for your post.
This is a quick note to let you know that we are performing research on this issue.
Best regards,
Please remember to mark the replies as answers if they help, and unmark the answers if they provide no help. If you have feedback for TechNet Support, contact [email protected]
Niko Cheng
TechNet Community Support

Help: Report about No specific task assigned to an SR

Hi,
Does anyone know if there's any way to report about a list of SR, which doesn't have a particular task attached to it?
Thanks

Thanks. Unfortunately I have got the following error:
Error Codes: OPR4ONWY:U9IM8TAC:OI2DL65P
State: HY000. Code: 10058. [NQODBC] [SQL_STATE: HY000] [nQSError: 10058] A general error has occurred.
Does it mean anything to you? sorry. I'm a total beginner.
Thanks a lot anyway.

Just found a gift card from 2008 and when I tried to redeem it it said the code wasnt valid. I read the back and it says nothing about expiring. How do I redeem it?

It's for $50 so I really want to redeem it! And I've read the back and it says nothing about expiring but is that what happened because its so old?

Contact iTunes
Apple - Support -form iTunes Store - Contact Us

Qualifications - Report about expiration in advance

Similar Messages

Maybe you are looking for