Quality check in FCP

Hi all,
I need a plug-in to FCP that can do tech checks...like look for black/colour bars/ high audio levels/high video levels etc. Can someone suggest me some third party plugin for Quality check of video / audio or any other solution for Quality check(technical check ) of .mov before sending it for broadcast .
thanks

FCP already contains both these functions:
Mark > Audio Peaks > Mark
View > Range Check

Similar Messages

  • Data quality check or automation

    Apart from passing the report to the user for testing are there ways the process can be automated for a data quality check and how?
    Thanks.

    Hi Dre01,
    According to your description, you want to check the report data quality. Right?
    In Reporting Services, the only way to check the report data is viewing the report. So for your requirement, if you want to make this data processing automatically. We suggest to create subscription, it will process the data automatically based
    on the schedule and you will get the subscription of report to check if it shows data properly.
    Reference:
    Create, Modify, and Delete Standard Subscriptions (Reporting Services in Native Mode)
    If you have any question, please feel free to ask.
    Best Regards,
    Simon Hou

  • How to do data quality check on XI?

    Hi XI guru,
    I am working on a project, our architect want XI to perform some data quality check to make sure the message contains correct data in future processing. Is there any existing solution or walk arround for XI to perform the data quality check?
    For example: if field A and field B is not exist, then XI need to send a email to remind someone who support this interface.
    For this kind of scenario, is that possible for XI to handle? What's the best option for XI?

    Hi,
    check all the condition in UDF and based on the condition result raise an alert.
    follow below steps:
    Michal Krawczyk
    The specified item was not found.
    Configuration steps are: go to transaction ALRTCATDEF
    1) Define Alert Category
    2) Create container elements which are used for holding an error messages.
    3) Recipient Determination.
    https://www.sdn.sap.com/irj/sdn/wiki?path=/display/xi/alert%2bconfiguration%2bin%2bxi
    Alert can be triggered in different ways.
    1) Triggering by Calling a Function Module Directly.
    Triggering XI Alerts from a User Defined Function
    chirag

  • Transport Quality Check-How to design

    Dear All,
    During transport request migration from SAP development system to SAP production system, we are facing following challenges.
    1. Parallel developments
    Change1 on ObjectA is done on development and migrated to test. Another change2 on same objectA is done by other developer and he also send it to test. Change1 is overwritten and testing can not be performed.
    2. Changes moved to production for critical business objects during a time when critical business activities are scheduled.The timing of change migration to production was wrong.Developer and tester were not aware of that critical business activity.
    I request your suggestion on how quality check can be in place to avoid above situations.
    What is the process following in your organization/client/project?
    Thankful to All in Adv.
    Brgds,
    Pankaj

    Hi Pankaj,
    This is not a technical issue.
    Only thing you can do is to make the developers aware of production impact.
    may be remove their rights to perform imports in production... so that a system admin can control it.
    You will have to figure out.. approval level in your organization to transport anything in production.
    Also a fixed time to be decided for transport, may be weekly once.
    Also for emergency transports, you must have a higher level of approval procedure in place.
    Regards
    Gaurav Desai

  • Suggestions about the best tool for quality check for an ADF application

    Hi All,
    I need a few suggestions about the best tool for quality check in our ADF applicaiton.
    ours is a small size WebCenter Portal application which neither uses any task flows nor consumes any portlets.
    It has many jspx pages that use ADF components like table etc, consume web services using web service clients, and has some java classes.
    We have come across below option to implement the code quality tools.
    1. Jdeveloper inbuilt Staus option in View tab
    2. PMD extension for Jdeveloper
    3. Red Samurai
    Few more suggestions or best practices would be really helpful.
    Thanks,
    Usha

    Some general ADF / Webcenter coding standards -
    http://umeshagarwal24.blogspot.com/2012/06/adf-coding-standards-check-points.html
    You can use JAudit as well as mentioned in the blog.

  • Quality checks at level of vendor's plant (in GR)

    Dear all,
    we have a problem with quality checks during GR. Our client wants to be able to check the his vendors at plant level.
    The dynamic modification rules have to consider not only the vendor but also the plant of the vendors from wich the materials were send.
    How can I do it?
    Thanks

    Please delete this duplicate thread. There is already one thread for same query.

  • Incorporating Quality check in Repetitive scenario

    Hi PP Experts,
    I have a requirement which is as follows for Repetitive scenario
    I need to do Quality check (for total carbonate (TC) value -- say will be in decimal)on one of the semifinished material and based on that result the operator controls the input temperature to the machine (say for example if total TC is 10 then the temp is say 110 deg). The requirement is that the TC for the semifinished material shud be captured and that information will be used by the operator in the control room.
    Im trying to do this throug inspection character in the rate routing.
    My Queries are
    1. Do i woork with inspection lot?
    2. How do I work with inspection characters?
    Any suggestion as to how it shud be done wud be rewarded.
    Thanks in advance
    Vinod

    Vinod,
    You need to assign the insp characterisc TC in the routing operation.
    Enter the control key as PP04 for the operation in routing CA22.
    Select the operation and go to Insp charac. Enter the MIC in this.
    When you create Insp lot through MSPR the insp lot will have this charc.
    Hope now it is clear. Reward points and clos this thread.
    rgds
    ram

  • Quality check in Repetitive Scenario

    Hi Experts,
    I have a requirement which is as follows for Repetitive scenario
    I need to do Quality check (for total carbonate (TC) value -- say will be in decimal)on one of the semifinished material and based on that result the operator controls the input temperature to the machine (say for example if total TC is 10 then the temp is say 110 deg). The requirement is that the TC for the semifinished material shud be captured and that information will be used by the operator in the control room.
    Im trying to do this throug inspection character in the rate routing.
    My Queries are
    1. Do i woork with inspection lot?
    2. How do I work with inspection characters?
    Any suggestion as to how it shud be done wud be rewarded.
    Thanks in advance
    Vinod

    Vinod,
    You need to assign the insp characterisc TC in the routing operation.
    Enter the control key as PP04 for the operation in routing CA22.
    Select the operation and go to Insp charac. Enter the MIC in this.
    When you create Insp lot through MSPR the insp lot will have this charc.
    Hope now it is clear. Reward points and clos this thread.
    rgds
    ram

  • Quality check for Pipeline Material

    Hi MM Guru's
    Is it possible to do quality check for Pipeline Material?
    If yes what is the process.
    Thank you
    Venu

    you can create a manual inspection lot, analyze a sample and record the results.
    but you cannot have a quality stock and do not do a transfer posting from quality to unrestricted or quality to blocked.
    There a many chemicals that are transported via pipeline and managed as pipleline materials, either supplied by a supplier in the neighborhood or even cross country. And it is needed that you want do quality checks on certain materials before you use them.
    Search the QM forum, you may find some discussions.

  • Customer returns to quality check storage loc............

    hi,  sap gurus,
    suppose some customer X has returned some 100 goods from 1000 he purchased and then these goods has to be transferred to different storage location because there quality check happens and after 72 hours or so then the tested goods will be transferred to goods for un restricted use and
    how to do this configuration in SAP r/3.
    plz help me onthis.
    regards,
    sd consultant

    If your requirement is something like this :
    Goods coming in - After GR is put - Goods should be posted to Quality Inspection not to Unrestricted Use.
    If its so,
    Goto Material Master
    Goto Quality Management Tab Page
    Activate the "Post to insp. Stock"
    Your requirement should be fulfilled.
    Thanks
    Vaidee
    Edited by: Vaidee on Aug 27, 2008 8:20 AM

  • Quality Check & Gatepass

    Hi All,
    1. I have created UDF Quality Check with values YES & NO  to map the quality module in my project
    I need at the time of creating A/P invoice only quality which is having value of YES need to be added to the system. Other wise It should block if the quality check is No
    Is this possible?
    2.  How do we manage 'Gate Entry' in B1? i.e Gatepass which is to be made at security at the time of receiving material.
    Regards
    Shashi

    Hi,
    I wrote the following code. But system is giving error message
    Can you tell me where I went wrong
    if @object_type = '18' and @transaction_type in ('A )
    begin
    if 0 = (select count(*) from opch where docentry =@list_of_cols_val_tab_del and u_Quality 'No')
    begin
    select @error =1
    select @error_message =No'Quality required'
    end
    end
    Error message is as follows
    Msg 102, Level 15, State 1, Procedure SBO_SP_TransactionNotification, Line 24
    Incorrect syntax near 'No'.
    Msg 105, Level 15, State 1, Procedure SBO_SP_TransactionNotification, Line 27
    Unclosed quotation mark after the character string '
    end
    end
    -- Select the return values
    select @error, @error_message
    end
    I have created UDF in marketing document Quality and given values Yes and no.

  • Quality Check....

    Hi frnds,
    can any one explain about Quality Check in ABAP?
    who will do? and what they will do? is there any tool in SAP to do this?
    Regards,
    Balu

    hi,
    U can do these checks.
    <b>In SE38 > Program > Check > Extended program check.</b>
    This is one check u can do for the program it will list out the errors u can correct teh same.
    Other things u might be having some standards that needs to be followed in ur project, those checks liek PRETTY PRINTER,... etc u have to do.
    reward if this helsp.

  • Quality check for consumables

    Hi ,
    I want to do quality check for consumables . When doing GR it is directly expensed to Cost Centre . How can it be posted to quality stock and then then after usage decision it be charged to cost centre .
    Regards
    Nandini

    Material procurement
    . procurement to stock
    me21n, migo- quality- UD to unres- miro
    . procurement to consumption
    me21n with K - migo - Cost centre Dr and Gr/Ir CR , miro
    here it means it is already consumed, that is the reason why no storage loc is possible.
    IF u want quality , u can do like this.
    Normal PO 200 qty with mat (quality view) , GR - to quality stock, UD for unrest
    Now u transfer post to cost centre as needed fro example 50 qty.
    rewds

  • Quality Check view foreign key

    Headstart Ruleframe Designer6i
    Running utility quality check view definition
    Report states that complete property for _CG foreign key must be set to "NO" to keep from being generated in DB. However if foreign key is used in formmodule error CDG-3436 is raised : " Invalid Linkage ". I'm I correct in assuming that Complete property has to be set to "YES" and Validation property to "CLIENT" to avoid the errors?

    You are correct. I will log this as a bug in the quality check report.
    Thanks,
    Lauri

  • Quality Check Certificate

    Does cisco offer quality check certificate for ISR routers?

    Dear Gajesh,
    I was going through your article on Certificates.
    In condition type for output detemination(SPRO settings),What is the use of maintaining form,If in VV21 in communication tab i need to mention the form name again.
    Also If i maintain it here it doent come as default form name in vv21.
    In certificate profile we give the form name again.
    Why is same setting done so many times?
    Also i tried with a test case and coudnt get output without the following setting
    VL02N, "Extras"> "Delivery Output"> header". Enter the output type and save the delivery.
    Can u pls guide

Maybe you are looking for