Quality clearence in mm

hello all,
we have QM procurement key(0007) active in material master,for each gods reciept there is seperate inspection lot is created.
after that we accept the inspection lot by QA11 tcode and clear it.
but i want to clear only partial quantity of inspection lot instead of full inspection lot quantity.when i am trying to clear partial quantity in qa11 tcode,system restricts the entry.
pls tell me what are the configuration steps for that and what are the settings to implement the same.
regards
simran

Hi
Would you please mention what's the error message the system throwa? you nmust have an inspection plan and quality tab page is maintained with an active inspection type...
To add more this a QM/ Quality management query. So you may get better answer from Quality management forum
Thanks & Regards
Chandra

Similar Messages

Logic for quality clearence to warehousing cycle time report

Hi,
I am developing a report on it,i know that Movement Type 101 and Y11(Transfer with in plant) is used for it. I want to know which tables or tcodes to be used for it for making the flow of the report (i dont want to use MSEG and MKPF tables).

Hi,
MB1A,MB1B are the T codes where u can do these Transactions.
MBLNR is the Docuemnt number field which .So use this field and click on WHERE USED LIST IN SE11 T code u will get other alternate tables.
If u dont use MSEG I can understande but i think there is no issues in using MKPF
Regards

QM related to MIRO

please help me ....
in the Make to order industry.
Let us assume i have Pur order No for 10 qty.
then i done MIGO for all the Item and Qty. 10.
(for this material QM is activated and Qm procu also activated and QM control key 0007 is assigned to the material master.)
after Doing the MIGO the stock is laying in th Quality.
Mean while Our FI personnel done MIRO for the same.
but after conpletion of the result recording i come to know that there is a fuilt in the material
so i am planning to post the material back to the Vendor.
(Return Delivery) through UD Stock posting Screen.
But the system not allowing to do so.
Because MIRO is already done..
Please suggest me How to block the FI personnel not to do MIRO untill Quality clearence .
thanx in advace.
Thanks & Regard's
Pathi,

Hi,
One possible way to block MIRO before UD posting is done is thru an enhancement
LMR1M001
Here you need to post following code to block MIRO in include:ZXM08U16
this code will cause an error message before UD and will allow MIRO for only qty posted to Unrestricted stock
*& Include           ZXM08U16
Declaration of variables
DATA: w_prueflos TYPE qamb-prueflos,
        w_lmenge TYPE qals-lmenge01.
Declaration of Internal Tables
DATA: itab LIKE qals OCCURS 0 WITH HEADER LINE.
LOOP AT e_tdrseg WHERE selkz EQ 'X'.
Checking whether the document require Inspection
    CLEAR: w_prueflos.
    SELECT SINGLE prueflos
      INTO w_prueflos
      FROM qamb
     WHERE mblnr = e_tdrseg-lfbnr
       AND zeile = e_tdrseg-lfpos.
    IF sy-subrc EQ 0.
      CLEAR: itab[], itab.
      SELECT SINGLE * INTO CORRESPONDING FIELDS OF itab
       FROM qals
      WHERE prueflos = w_prueflos
        AND stat35 = 'X'.
      IF sy-subrc EQ 0.
        READ TABLE itab INDEX 1.
        CLEAR: w_lmenge.
Sum of quantity (Excludes Block stock)
        w_lmenge = itab-lmenge01.
        IF e_tdrseg-menge GT w_lmenge.
          MESSAGE ID 'ZMM' TYPE 'E' NUMBER '004' WITH w_lmenge e_tdrseg-lfbnr.
        ENDIF.
      ELSE.
        MESSAGE ID 'ZMM' TYPE 'E' NUMBER '005' WITH e_tdrseg-lfbnr.
      ENDIF.
    ENDIF.
ENDLOOP.
Hope this helps
Regards
Dheeraj...

Master data is not getting displayed in the Report in Quality

HI Experts,
I have ZESP_Num as master for my transaction data.
I have loaded the data in the Development and designed and checked my report. It is working fine.
But after moving it to Quality. My report is not getting the master data.
When I try to do right click manage ZESP_Num.
I'm getting message like this.
The data from the InfoProvider ZESP_NUM involved could not be checked
Message no. DBMAN242
Diagnosis
A participating InfoProvider is virtual and aggreement between results and selections cannot be guaranteed.
Can anyone plz help me.
Thanks

Hi,
Please check the SNOTE Note 1364083 u2013 Message text will appear unexpectedly in surface.
Hope helpful.
Regards,
RAO

Can I return my new laptop to lenovo because of its quality problem?

IBM is one of the best brand as I know, especially showing us not only high quality of products but the service.
But now one thing happened to me, if I don't have this case I can't believe. I found there is something with the laptop(T61 Model 7658CTO) the same day when I got the new laptop on June 3rd, 2008. Then I call 800, a lot of 800 calls,at last I were told that I should contact send it back first if I were to get another new one. Three days later I got the box sent by Lenovo, and I return it back in terms of what the paper shown.
Unfortunately the problems of the laptop still exist when I turn on my laptop after it repaired. What's wrong with my laptop, this is new one, I think IBM should provide high quality products.
I don't know how to describe the weird sound , it sounds like two or more micphone opened clost to each other. It is very harsh.
I want to get one new laptop from Lenovo because of the quality of product and customer service or can I return the laptop?
I would appreciate any advice you can give me.
Message Edited by hjwu1979 on 06-27-2008 07:18 AM

Like Obama says... yes you can
I did it last week because I bought an iPhone 4 as a wedding gift but then I changed my mind and wanted an iPad, so the bride could use it together with the groom (while the phone is personal).
I returned the iPhone to the apple store and I paid the difference to buy the 32GB iPad, no problems
I didn't opened the case, but the guy at the apple store told me I could have returned the phone even if it was opened. It must be undamaged tough.

Iphone 5S call voice Low quality.

Iphone 5S low quality call voice. When I make a phone call , people in the other side said my voice is very small and disconnected. The voice is good when I am using the earphone at the same calls

Hello tigertiger123abd,
The following article can help sort your iPhone's built-in microphone.
iPhone: Microphone issues
http://support.apple.com/kb/TS5183
Cheers,
Allen

Questions on default print quality and print order

I recently upgraded to CS 5.5, a clean install on a new Mac running 10.7. I've found two issues regarding printing from both Acrobat and InDesign:
In both programs, if I go directly to print (command-P, then hit OK without changing settings), documents will print at my printer's default setting, which is for a high-quality photo on glossy paper. (I haven't figured out yet how to change that default.) I want it to print to my faster standard quality setting, which is generally also the "last-used" setting. I can of course go into printer settings to fix -- each time I do that, my standard setting is already set in that window -- but I have to make that move every time I print.
Previous versions of both programs (CS3) automatically went into the last-used or standard setting. How can I get that back?
Also, print order hasn't been working as it did in CS3. Documents print first-page-first in CS 5.5, unless I check "Reverse order"; in CS3, docs printed last-page-first automatically, without checking any additional box, making documents easier to collate. Also, on many documents, "Odd pages only" prints the even ones, and vice-versa.
How can I get the automatic reverse order and correct odd/even back in Indesign 5.5 and Acrobat X Pro?

Hi Davis,
Well, if you are able to log on the BPS application (thus, a Web Interface if I'm not mistaken) then it means that some user is logged on the ABAP-side. It is either a "personal" user or a technical (common) user, that is used for anonymous access.
You will certainly be able to track down this user with the SM04 transaction.
You should be able to add a button to the BPS page. One idea would be to call an URL with an ICF service behind that will be able to process the parameters contained in this URL.
It will be this very ICF service that will call the BAPI.
Try these links
http://help.sap.com/saphelp_nw04s/helpdata/en/55/33a83e370cc414e10000000a114084/frameset.htm
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/ea8db790-0201-0010-af98-de15b6c1ee1a
Hope this helps.
Best regards,
Guillaume

How many times can you "Export - Quicktime movie" the same ProRes 422 file until it starts to lose quality?

Lets say you are done with your project & you want an uncompressed copy of it as your master. If you keep importing it back into Final Cut Pro, & keep exporting (Quicktime movie), will it ever start to lose quality?

I've never seen a number given, but would think it is very high.
Apple describes ProRes here:
About Apple ProRes
And in that document says:
"while remaining visually lossless through many generations of decoding and reencoding."
I don't think I've ever seen degradation caused by recompression or multiple compassion, but as a workflow if you output a master file, then re-import it to add graphics and export that, you would only be 1 generation down from the master file. If you wanted to make multiple versions, you can always go back to, and re-import, the master file and make the changes, then export, so all you exports stay only 1 generation down from the master file.
MtD

Let us solve this Verizon Service Quality debate for good

   Motorola Droid here.
    I don't frequent this forum too often, I probably glance at it once a week or so, but it doesn't take a regular visitor to take notice that this forum is always peppered with 3G complaints, some more or less valid than others. However, after reading through a couple different threads tonight I'm afraid I'm going to have to hop on the bandwagon and question my 3G speeds.
     First off, I saw somebody say that 90-100 dBM isn't very good. I am always stuck at around 98 dBm in my home though, and when I'm out and about I find it never gets below the high 80s. Is this normal? Also in my Settings>About Phone>Status menu, it constantly says I am on an "Network Unknown." This occurs and remains constant despite any combination of settings, including  roaming being on or off, and whether or not I am on 3G, 1X, or WiFi.
     Speaking of WiFi...when I am at home I use my home router as opposed to 3G for obvious reasons, which is a NETGEAR N router, yet I still only average about 2.5 mbps when connected to it or any wifi elsewhere. Yes, I have tried turning my routers security off, and yes, I do have it in b/g mode. I have also done the 228 number thing, the disabling of voice privacy suggestion, turning roaming on/off, several factory resets, etc.
    Basically I'm just curious to know if anybody else is having similar issues, and what your average speeds are. Infact, I'm going to make a little form below this paragraph for anyone who is interested, and rename the title of this post. Perhaps we can congregate enough responses to come up with an average and then determine whether we are receiving acceptable service or not:
Phone model:________
What is your...
     Average 3G download speed? _____dBm
     Average WiFi download speed? _____dBm
    Any other comments that are pertinent___________

first...how do i check my signal and speed? do i NEED an app or is there somewhere on the phone to do this? (i've seen others talk about 85-95 dBM, but never knew how to check). let me know and i'll post the results.
also, one other thing you can try....and i MUST stress that i know little about this, except that it seemed to have improved my quality (voice/sound....my phone sounded "muffled" on both ends) on both ends, but i'm not sure if it actually increased my signal strength?
call ##778
select "edit mode"
enter the password: 000000
go into the "cdma settings"
change home page," "home orig," and "roam orig" from evrc to evrc-b
hit menu and "commit modifications."
from what i gather, evrc-b is better technology, but is not supported everywhere. so if you try this and your signal is worse (or gone) then you'll need to follow the steps to switch it back. you will also want to save these instructions to your phone in case you find yourself somewhere that appears to be getting poor or no signal, so you can switch it back.

Large pdf(40MB) with 600 pages color quality is poor if i print more than 1 or 2 pages at a time.

I have a 40MB PDF file with over 600 pages of color images. If i print each page one at a time, there is no issue whatsoever with the quality, but if i print say 5 pages, the 4th and 5th page and any subsequent page will look like rubbish. In general, just not the same color quality as before. The Konica Minolta printer doesn't seem to be at fault here because like i mentioned, this problem does not occur if i print individual sheets, just if i print more than 5 or so.
Printing individual sheets in this instance, however, is not a real solution because in all the job will have many thousand pages. What do i do? Any one here experience a similar problem?

You were able to catch me whilst my Konica Minolta tech was here.
This is my take on his diagnosis,
The c353 while capable of quality output is not exactly a robust production level machine.
Without the aid of a RIP, all the processing needs to happen either in memory or it may have a hdd. Does the machine have a hard drive?
In either case, you are running out of memory.
Changing the printers properties on spooling may aid in completing the job.
He mentioned sending the job as raster. Print as Image from Acrobat's Advanced tab would do that, but I think you would cripple your computer doing such. Try it; be prepared to go out to lunch or something while it churns away.
hth

A/P Credit memo after GRIN Quality Inspection

Hi all,
We have to implement GRIN Quality Check module for one implementation. What we have done in the add on that for one GRIN, we go to Quality Check Program where item wise we enter the Accepted Quantity and Rejected Quantity . Then for all the Rejected Quantity we move the items from Raw Material W/Hs (GRIN W/Hs) to Rejection W/Hs and then create the invoice for complete GRIN Quantity for all the items . We have thought to return back the rejected items using A/P Credit memo which will both nullify the Invoice affect as well as Stock Affect . But there is a problem that we are encountering during A/P Credit memo :
When we perform Copy From from A/P Invoice to A/P Credit Memo , all the details form A/P Invoice are copied don to A/P Credit memo , but we want to return the goods not from RM WHs but from the Rejection WHs as we had already moved the Rejected Items stock to Rejection WHs ,when we change the code of Warehouse from RM WHs to Rejection WHs , it removed the tax code from Tax Code columns for that row and later does not even allow to edit the Tax Code for that row without which we are not able to save the A/P Credit memo.
please suggest the best way of implementing the complete scenario so that we could both be able to maintaining the separate stock of Rejected Items, Return it back after creating the complete Invoice . We also wanted to create the complete invoice after GRIN irrespective of the no. of items rejected.
Thanks and Regards,
Pooja Singh.

Hi,
Might be I have elaborated too much thats why I have not received any solution so far.
Actually I just want to confirm one thing first, that we are working for GRIN Inspection as follows :
1. GRIN
2. Inspection of all the items in a particular GRIN
3.Stock Transfer of Rejected Items to Rejection Locations
4.Now we want to create Complete Invoice that is invoice for Complete Quantity irrespective of Rejected Qty.
5.Now Returning back the Rejected Qty of items from Rejection Whs and Credit note for Vendor to reduce the due balance.
But when I try to create A/P Credit memo from AP invoice I want to change the WhsCode from RM Whs to Rehection Whs which if done , Tax code disaapears and disables.
What should be done.
Thanks and Regards,
Pooja Singh.

Error while creating Quality Plan

Dear Experts,
While creating the Quality Plan following error is coming -"Error occured when checking type "
In the log of task list following error is appearing - "Op. 0060, CH 0060:char. iden % used for QDI several times in task list"
Please give your valuable suggestion onto this.
Thanks
Sumit

It means you are sending down the same characteristic to an external system like LIMS more then once.
I believe this is a warning. Not a hard error but I'm not 100%sure.
Craig

Error while transporting the request from quality to production of BI

Dear all,
When transporting a request (which contains elements of correction - in Bex designer) from quality to production of BI the following error is displayed and the request transport fails. Can the experts throw some light on this.
           Execution of programs after import (XPRA)
           Transport request   : RBDK904992
           System              : RBP
           tp path             : tp
           Version and release: 372.04.04 700
           Post-import methods for change/transport request: RBDK904992
           Post-import method RS_AFTER_IMPORT started for ELEM L, date and time: 20080406140407
           Start of the after-import method RS_ELEM_AFTER_IMPORT for object type(s) ELEM (Activation Mode)
           Error when activating element EY2CXLKXP5X5AY0RQ2XKN9EX8
           Element 5E4II2344I3JG4R6ACMYQ441Z is missing in version M
           Start of the after-import method RS_ELEM_AFTER_IMPORT for object type(s) ELEM (Delete Mode)
           Errors occurred during post-handling RS_AFTER_IMPORT for ELEM L
           The errors affect the following components:
             BW-WHM (Warehouse Management)
           Post-import methods of change/transport request RBDK904992 completed
               Start of subsequent processing ... 20080406140407
               End of subsequent processing... 20080406140408
           Execute reports for change/transport request: RBDK904992
           Reports for change/transport request RBDK904992 have been executed
               Start of................ 20080406140408
               End of.................. 20080406140408
           Execution of programs after import (XPRA)
           End date and time : 20080406140408
           Ended with return code: ===> 8 <===
Thanks in advance.
Regards,
M.M

Hi,
First try to figure out the object type from the text obtained by following steps above.
Goto Development server ,create fresh request (using transport connection) , transport to QA and then in to production.
After successful transfer of the request for this object ,try to reimport the request which caused error and it should go smoothly without any error.
Hope it helps.
Regards
Mr Kapadia

Error while transporting database index into quality system

Hello,
I am getting an error while transporting a new index in quality system.
I have created a new index for table VBFA in TRD and activity the object without errors. I even adjusted the database table using database utility.
While transporting the request there was a strange error "R3TRTABLVBFA was repaired in this system".
I retransported the objects using a new request. However I still got the same error.
Please help.

Navin,
No idea about the error you have mentioned but check the SAP Notes 185530 and see if you can avoid creating an index.In this Notes it is clearly mentioned on how to use VBFA table without any performance issues.
K.Kiran.

HP Officejet Pro L7590 - print quality issue

We've had a lot of problems with this unit since day one. It simply wouldn't work with our XP computers. Thankfully it does work with our new Windows 7 computer.
The problem I'm having is that I have to clean the printheads at least once, if not twice, before every print job if it hasn't printed anything recently (even an hour or two).
Although we've had the printer for a while, it has hardly been used because it wouldn't work with our previous computers (and I gave up trading emails with HP support because the situation just got worse each time we tried something, not better). The myPrintMileage function says we've printed just over 300 pages (and I can pretty much guarantee that at least 250 of those have been diagnostic pages trying to get it working, not actual print jobs).
The only advice I can find on the troubleshooting page is to replace the printhead/s. Is that really the case? We have already had to replace ink cartridges before we ever got the printer working. If we now have to replace one or both printheads this machine is proving very costly to run. I would be very disappointed to find we had had to replace all four ink cartridges and both printheads before we ever got the machine working properly.
I'd appreciate any feedback you can offer on this please.

I've included a link below to help you troubleshoot rpint quality issues...
http://h10025.www1.hp.com/ewfrf/wc/document?docname=bpu03037&tmp_task=solveCategory&lc=en&dlc=en&cc=...
This document provides some system settings that may help fix the issue.
Dave M.
Say Thanks by clicking the Kudos Star in the post that helped you.
Please mark the post that solves your problem as Accepted Solution.
I am an HP employee.

Quality clearence in mm

Similar Messages

Maybe you are looking for