Quality Gate Management workflow
Hi Gurus,
I have successfully implemented Quality Gate Management POC for a 4 System Landscape.I have few questions.
My questions are:
1. Can we have control on moving only block of change requests at any specific point of time to PRODUCTION
For Eg: Let us suppose there are 50 Change Requests which are pending to move to PRODUCTION. Can I move only 25 Change Requests at a specific time and the other 25 at some other time to PRODUCTION instead of moving all the 50 at a time (the option START IMPORT will move all the CHANGE REQUESTS into PRODUCTION at one time)? I am able to move only specific block of Change Requests from DEV to QUALITY. But not from QUALITY to PRODUCTION.
2. Is there any possibilty of using the CROSS SYSTEM OBJECT LOCKING in QGM without using CHARM?
Thanks,
Sandeep
Waiting for replies
Thanks,
Sandeep
Similar Messages
-
Quality Gate Management - new features in SPS 23 but no documentation
Dear SDN Members,
After an update to SPS 24, we noticed 2 new buttons in a Quality Gate project:
- Reassign Transport Requests
- Distribute Transport of Copies
I can imagine the functionality of both by deduction from what is available in CHaRM.
It is nevertheless impossible to find further documentation.
So, any help on how to configure and / or use these functions will be appreciated.
Regards.Hello Jos,
please see the below links:
for a global introduction:
https://websmp203.sap-ag.de/e2e -> change control management : Quality Gate Management
for a detailed documentation
http://help.sap.com/saphelp_smehp1/helpdata/en/b3/64c33af662c514e10000000a114084/frameset.htm
-> Under Change Request Management and Change Management click on Quality Gate Management
- Reassign Transport Requests
- Distribute Transport of Copies
are two functionalities that existed even before Quality Gate concept. Those were available in tasklists and change documents of Change Request Management of Solman.
You ll definitely find more info on both on this forum by sarching transport of copie and transport request reassignment.
One more thing : for the reassignment of TR; it does nt allow you moving a TR from a Solman project to another. It only let you assign an open (modifiable) in a dev satelilite system to a CTS project (linked to a Solman Project) so you can manage its release and import from Solman
Hope this helps
Regards
Khalil
Edited by: Khalil SERRHINI on Jul 26, 2010 1:54 PM -
Activating sm_quality_gate Quality Gate Management service
HI
we have been using ChaRM in SOlution Manager 7.0 EHP1, we are intending to exploit more functions of solution manager , i.e Implementation Project. The question is if we activate service for Quality Gate Management , there will be any impact on our maintenance cycle???
Please guideHi
Yes you can
http://help.sap.com/saphelp_smehp1/helpdata/en/a9/0473a0d3f74adcaa6c6b4be7635867/content.htm
more doc can be check above
further for solman 7.1 new functions check this link
http://help.sap.com/saphelp_sm71_sp01/helpdata/en/a9/0473a0d3f74adcaa6c6b4be7635867/frameset.htm
regards
prakhar
Edited by: Prakhar Saxena on Nov 28, 2011 6:04 PM -
Question about Quality Gate Management
Hi Solman profis,
I have questions about the transport requests in QGM.
My Solution Manager is 7.1.
I have a Solman project, in which I activated QGM and created a Change and created two transport requests (one workbench, one customizing) attached to it, .
I'm little bit confused by the concept.
My questions are:
1. Why I cannot see the transport requests that I created previously in the DEV system manually? If it's normal, for which reason is this designed like this? If it's not normal, how can I configure to see those requests?
2. What is the difference between the Change here in QGM and the Change in ChaRM?
3. In practice, how should the transport requests be created? By the developer in DEV systems, or by the responsibles in Solution Manager Workbench (Change Management Workbench)?
Thanks a lot!
Edited by: Charlie Red on Feb 13, 2012 12:08 PM
Edited by: Charlie Red on Feb 13, 2012 12:09 PMFor the 3rd question, I think TRs should be created in Change Management Workcenter, is it the correct process?
For the other questions, can somebody give some input? -
Difference in Transport Request in SOLAR_PROJECT_ADMIN & Quality Gate
Hi
I want to ask about how Quality Gate works in an Implementation Project??
How a quality manager role comes in action?? how a project is transported into landscape??
What is the difference in creating transport request from SOLAR_PROJECT_ADMIN and creating Transport request from Quality Gate Management in Change Management Workcenter???
Please guide
Thanks & Regards
SidraHi,
check this
http://sap.ittoolbox.com/groups/technical-functional/sap-solution-manager/where-are-uploaded-office-documents-physically-stored-in-sap-2647587?cv=expanded
as per above link u can try with option
1.
use Tcode - SOLAR_PROJECT_ADMIN
1. Select the project in the project overview.
2. Choose the Transport Project pushbutton or Project ® Transport.
3. Specify the transport scope in the following dialog box. To transport the project without project documentation, reset the With Notes flag. The project documentation is transported by default.
4. Specify a transport request or create a new one.
5. Save your entries.
Regards,
Ravi -
Hallo colleagues
My company would like to start using Quality Gate Management functionality but we don`t have any expertise in this component, do you have any doc or note that shows how to configure this task ?
I appreciate your help, please, do the needful to help me in this doubt.Hi
You can check below
http://www.solutionmanagerexpert.com/article.cfm?id=5134
http://help.sap.com/saphelp_smehp1/helpdata/en/a9/0473a0d3f74adcaa6c6b4be7635867/content.htm
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/e050c61c-59ed-2c10-7e94-990fa6b95538
Change Control With SAP Quality Gate Management
http://wiki.sdn.sap.com/wiki/display/SMAUTH/QualityGateManagement
Morover just logon to solman check in spro
Hope above helps
regards
prakhar -
InDesign color management workflow help
Hello,
I recently had to create a 60 page color booklet for a University on a very tight schedule. The booklet was to be printed to press. I was not given any specifics as to the output specifics.
So, I was creating vector graphics in Illustrator as CMYK, and importing them in InDesign. And receieving e-mail with bitmat images in formats from JPG, TIFF, PDF, PNG. and I would place them directly into InDesign. If I had to do any photoshoping of a picture, I would conver the sRGB original to CMYK.
I have been reading discussion about color management workflow. But I am still not clear what I should have been doing with the roughly 100 image files sent me to be in the booklet?
Somewhere I read the way I did it was okay, as long as I let InDesign handle image conversion on the output? Is this correct? When I went to make my Package for the printer, I did get the Triangle "warning" that some images were sRGB. The PDFs looked great.
What should I have done as all these images came in? It was a crazy deadline. I can't imagine having to open every image in Photoshop -Convert to CMYK-Adjust colors and resave and import?
And what do you do if you don't know the specific output printer? I default to SWOP.
So, will InDesign, convert any incorrect (sRGB etc) images on the final output to the proper colorspace to be printed properly?
Thanks
RobinInDesign will convert RGB to CMYK when you're exporting as PDF files IF (big IF) you choose PDF/X-1a as your PDF preset. Some of the other PDF presets (e.g., Press Quality) don't do this conversion. Their color conversion setting is No Conversion.
SWOP is a reasonable output assuming your printer didn't give you a customized CMYK profile to install with instructions to install it (most North American printers don't do this). -
Is CTS+ configuration a prerequisite to Quality Gates ?
Hello,
I have heard that CTS+ has to be configured first before I can configure Quality Gates on my Solution Manager system.
Does anyone know if this is true?
Thanks,
JudithDear Judith,
According to SAP Note 1256490 it states TMS has to be activated.
So this would cover ABAP systems.
The Note also makes reference to Note 1256490 - regarding an issue for NON-ABAP systems and CTS+,
which would indicate that TMS is the prerequisite transport for ABAP systems, but it can be infered for
non-ABAP systems CTS+ is the required transport.
Hope this helps.
Regards,
Paul -
Scanner calibration for colour-managed workflow
I would like to do a decent calibration of my Epson V750 Pro scanner to achieve a colour-managed workflow. I have the latest version X-Rite i1 Photo Pro 2 calibration kit, and although this enables me to calibrate my monitor and printer, it does not support scanner calibration. I do have Silverfast Ai Studio which includes a scanner calibration facility - is that the best available to me or are there any other options, possibly using the i1 spectrophotometer as I know that it used to be possible to carry out calibration with the older versions of that equipment? Other than that, I'm using an Espon 3880 printer, running Vista x64 and using Photoshop CS5.
Mike is probably right, the Epson profiles available in the Epson scanner sw are close enough. I;ve never seen any ******** about scanner output in this forum.
-
Hierarchical entities view in Manage Workflow
Hi! In my 9.3.1. planning application users with Administrator role can choose between hierarchical and flat views of entities in the Manage Workflow screen but users with Interactive User role only see entities in the flat view with no option for hierarchical view of entities. Is it a standard limitation of Hyperion Planning or is it fixable? I would be very grateful for any ideas!
Edited by: user10129034 on 19.05.2009 9:47Refer to the following conversation:
Workflow query -
Calling transaction from Workitem - Credit Management workflow
Hi,
Our client have a requirement to have a link in the workitem and when we click on the link it should open transaction S_ALR_87012218.
The requirement in Credit management workflow, in which we are having included object as sales order, when we click on it, it will open transaction VA03.
Similarly the client requires to have one more link below sales order, clicking on which it should open transaction S_ALR_87012218.
Thans in advance for your help.Hi Kjetil ,
Thanks a lot for your answer.
I have created a new object type with default method and key as controlling area and customer which are mandatory fields for the report RFDKLI41.
I am submitting the report in the default method.
Now I have a query, how can I attach this object in my workflow?
I am already passing sales order as WI_OBJECT_ID.
Also help me, how can I pass values of controlling area and customer from sales order to this newly creates object?
Thanks in advance. -
Oracle Golden Gate Manager not starting
Trying to configure Oracle Golden Gate between oracle 10g and Oracle 9i
Golden gate Manager is not starting
Error in MGR.rpt
Source Context :
SourceModule : [mgr.main]
SourceID : [home/ecloud/workspace/Build_FBO_OpenSys_r11.1.1.0.0_078_[34085]/perforce/src/app/mgr/mgr.c]
SourceFunction : [param_file_args]
SourceLine : [2854]
2010-10-03 09:27:48 ERROR OGG-00303 Unrecognized parameter (<CODE>PORT).
2010-10-03 09:27:48 ERROR OGG-01668 PROCESS ABENDING.
GGSCI (ggntestb) 1> edit params mgr
"/export/home/oracle/ggs/dirprm/mgr.prm" 1 line, 23 characters
<code>PORT 7809</code>Hi,
Welcome to oracle forums :)
Refer Link: http://gavinsoorma.com/2010/02/goldengate-tutorial-3-configuring-the-manager-process/
Regards,
X A H E E R -
Color managed workflow for web and camera raw
I recently calibrated my monitor and was wondering what is the preferred workflow for the web? I shoot with my camera in sRGB and my working space in Photoshop is sRGB aswell. The problem that has arised now is that the color managed colors in Photoshop are way different than the non-color managed in my web browser. Is this normal? And what I don't quite get is how a photo that has an embed sRGB profile looks the same in Firefox (that understand embed profiles) and Photoshop, but in Google Chrome (that does not recognize embed color profiles) shows the colors very differently, although the browser should understand the photo is in sRGB by default and show the same colors that are in Photoshop, right? So what happens here, because the colors are not the same? What information does Photoshop assign to the embed color profile that makes the colors so different?
Anyway, I assume the problem here seems to be my newly calibrated monitor profile. The only way I can get the same colors to my photo in Photoshop and to a photo in web is to use soft proofing set to my Monitor RGB AND save without a color profile. Is this the way to go? But here comes another problem. I shoot in RAW and use camera raw to edit my photos. Camera Raw doesn't allow soft proofing, so I'm stuck with these color managed colors that are so different from non-color managed colors I get in my browser that any color correction in Camera Raw is simply useless. Unless everyone was using color managed browsers and I could start to use fully color managed workflow, but that's not the case I suppose. So, what's the solution here?First off, you need to be working in sRGB, or converting to sRGB when you save out files that are destined for the web. You can change the color space that Camera Raw (ACR) send your raw files to by clicking the blue text in the bottom center of the ACR window. This is probably that safest workflow for you until you get a handle on color management. If the color of your images is very important, you might consider embedding a color profile in them, which will help color managed browsers render your color properly.
If your display's color gamut is different than sRGB (many are), you'll find matching colors for non-color-managed browsers to be impossible. But consider the average display and take heart. The best you can do is correct to a standard and hope for the best.
Both the convert to sRGB and embed color profile options are in the save for web dialogue box.
More about the ACR workflow options here:
http://help.adobe.com/en_US/Photoshop/11.0/WS739D7239-24A7-452b-92F9-80481C544F25.html
More about matching colors for the web:
http://help.adobe.com/en_US/Photoshop/11.0/WSB3484C68-ECD2-4fa4-B7CC-447A5FE86680.html
http://help.adobe.com/en_US/Photoshop/11.0/WSD3F5E059-4F51-4b44-8566-13B854D3DF5F.html
http://help.adobe.com/en_US/Photoshop/11.0/WS0B3CD652-4675-44be-9E10-445EB83C60BA.html -
COREid 7.0.4 - Group Manager Workflow - Applet Fails to Load
I am having a problem with a new installation of COREid 7.0.4. All applets in User, Group and Org Manager work fine with the exception of the Group Manager Workflow configuration Applet. The applet fails to load. Has anyone ever experienced this problem before? Any help is appreciated. The system information is:
Windows 2003 Server
IIS 6.0
AD 2003
Java Plug-in 1.5.0_04
The Java Console trace information is pasted below.
Java Plug-in 1.5.0_04
Using JRE version 1.5.0_04 Java HotSpot(TM) Client VM
User home directory = C:\Documents and Settings\user
c: clear console window
f: finalize objects on finalization queue
g: garbage collect
h: display this help message
l: dump classloader list
m: print memory usage
o: trigger logging
p: reload proxy configuration
q: hide console
r: reload policy configuration
s: dump system and deployment properties
t: dump thread list
v: dump thread stack
x: clear classloader cache
0-5: set trace level to <n>
basic: Registered modality listener
liveconnect: Invoking JS method: document
liveconnect: Invoking JS method: URL
basic: Referencing classloader: sun.plugin.ClassLoaderInfo@14ce5eb, refcount=1
basic: Added progress listener: sun.plugin.util.GrayBoxPainter@3e0339
basic: Loading applet ...
basic: Initializing applet ...
basic: Starting applet ...
network: Connecting http://localhost/identity/oblix/apps/groupservcenter/bin/groupservcenter.cgi?program=addCookie&time=1149264001561 with proxy=DIRECT
network: Connecting http://localhost/identity/oblix/apps/groupservcenter/bin/groupservcenter.cgi?program=addCookie&time=1149264001561 with cookie "ObTEMC=648DCJKwxHQaRBcRGeOlel6xakVeEZs%2FVoSGqgLCgKemQQqI1qzeb30lOpg6OErpJp2LLzZogAK%2Fsrwtl%2BSREhXMw5g5ba4wUveFKa2oCzwcmfgBcGizP2eKV6gQFkKkXtA%2FsuydnB1KEIQhYdhevWExlcN8yRFE1TYKj%2BJxXdrdf8bP6jVLmPp5MXwHrO0iojKnh1iumldPon8i67uy%2BiurULgOkxsGA4Io%2F363uDc%3D; ObTEMP=%23comp_cookie%3Dfalse%23OblixUserNameCookie%3DUser%20Name%23"
network: Server http://localhost/identity/oblix/apps/groupservcenter/bin/groupservcenter.cgi?program=addCookie&time=1149264001561 requesting to set-cookie with "ObTEMP=%23comp_cookie%3Dfalse%23OblixUserNameCookie%3DUser%20Name%23; path=/;"
network: Connecting http://localhost/identity/oblix/apps/groupservcenter/bin/groupservcenter.cgi?program=addCookie&time=1149264001577 with proxy=DIRECT
network: Connecting http://localhost/identity/oblix/apps/groupservcenter/bin/groupservcenter.cgi?program=addCookie&time=1149264001577 with cookie "ObTEMC=648DCJKwxHQaRBcRGeOlel6xakVeEZs%2FVoSGqgLCgKemQQqI1qzeb30lOpg6OErpJp2LLzZogAK%2Fsrwtl%2BSREhXMw5g5ba4wUveFKa2oCzwcmfgBcGizP2eKV6gQFkKkXtA%2FsuydnB1KEIQhYdhevWExlcN8yRFE1TYKj%2BJxXdrdf8bP6jVLmPp5MXwHrO0iojKnh1iumldPon8i67uy%2BiurULgOkxsGA4Io%2F363uDc%3D; ObTEMP=%23comp_cookie%3Dfalse%23OblixUserNameCookie%3DUser%20Name%23"
network: Server http://localhost/identity/oblix/apps/groupservcenter/bin/groupservcenter.cgi?program=addCookie&time=1149264001577 requesting to set-cookie with "ObTEMP=%23comp_cookie%3Dfalse%23OblixUserNameCookie%3DUser%20Name%23; path=/;"
basic: Loaded image: http://localhost/identity/oblix/lang/en-us/style0/NAVnew.gif
basic: Loaded image: http://localhost/identity/oblix/lang/en-us/style0/NAVdelete.gif
basic: Loaded image: http://localhost/identity/oblix/lang/en-us/style0/NAVadd.gif
basic: Loaded image: http://localhost/identity/oblix/lang/en-us/style0/NAVsaveworkflow.gif
basic: Loaded image: http://localhost/identity/oblix/lang/en-us/style0/NAVcancelworkflow.gif
basic: Loaded image: http://localhost/identity/oblix/lang/en-us/style0/NAVprevious.gif
basic: Loaded image: http://localhost/identity/oblix/lang/en-us/style0/NAVnext.gif
basic: Loaded image: http://localhost/identity/oblix/lang/en-us/style0/NAVnew.gif
basic: Loaded image: http://localhost/identity/oblix/lang/en-us/style0/2NAVnew.gif
basic: Loaded image: http://localhost/identity/oblix/lang/en-us/style0/NAVmodify.gif
basic: Loaded image: http://localhost/identity/oblix/lang/en-us/style0/2NAVmodify.gif
basic: Loaded image: http://localhost/identity/oblix/lang/en-us/style0/NAVdelete.gif
basic: Loaded image: http://localhost/identity/oblix/lang/en-us/style0/2NAVdelete.gif
basic: Loaded image: http://localhost/identity/oblix/lang/en-us/style0/NAVcopy.gif
basic: Loaded image: http://localhost/identity/oblix/lang/en-us/style0/2NAVcopy.gif
basic: Loaded image: http://localhost/identity/oblix/lang/en-us/style0/NAVview.gif
basic: Loaded image: http://localhost/identity/oblix/lang/en-us/style0/2NAVview.gif
basic: Loaded image: http://localhost/identity/oblix/lang/en-us/style0/NAVenable.gif
basic: Loaded image: http://localhost/identity/oblix/lang/en-us/style0/2NAVenable.gif
basic: Loaded image: http://localhost/identity/oblix/lang/en-us/style0/NAVexportall.gif
basic: Loaded image: http://localhost/identity/oblix/lang/en-us/style0/2NAVexportall.gif
java.util.NoSuchElementException
at java.util.StringTokenizer.nextToken(Unknown Source)
at com.oblix.workflow.ObWorkFlow.prepareForms(ObWorkFlow.java:3010)
at com.oblix.workflow.ObWorkFlow.init(ObWorkFlow.java:1109)
at sun.applet.AppletPanel.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)
basic: Exception: java.util.NoSuchElementException
Exception in thread "thread applet-com.oblix.workflow.ObWorkFlow.class" java.lang.NullPointerException
at sun.plugin.util.GrayBoxPainter.showLoadingError(Unknown Source)
at sun.plugin.AppletViewer.showAppletException(Unknown Source)
at sun.applet.AppletPanel.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)Yes, I do
It's working for other things, only problem is usermanager workflow definition
This is the error:
Java(TM) Plug-in: Version 1.3.1_07
Using JRE version 1.3.1_07 Java HotSpot(TM) Client VM
User home directory = C:\Documents and Settings\pwaxa64
Proxy Configuration: Browser Proxy Configuration
c: clear console window
f: finalize objects on finalization queue
g: garbage collect
h: display this help message
l: dump classloader list
m: print memory usage
q: hide console
s: dump system properties
t: dump thread list
x: clear classloader cache
0-5: set trace level to <n>
java.util.NoSuchElementException
at java.util.StringTokenizer.nextToken(Unknown Source)
at com.oblix.workflow.ObWorkFlow.setDisplayTypes(ObWorkFlow.java:2085)
at com.oblix.workflow.ObWorkFlow.init(ObWorkFlow.java:1027)
at sun.applet.AppletPanel.run(Unknown Source)
at java.lang.Thread.run(Unknown Source)
Thanks -
Performance management workflow appraisee and appraiser name to be passed in email
I am working on the performance management workflow. When the manager chooses to require an employee self assessment then an email notification should be triggered to the employee (appraisee) notifying them of the self assessment to be taken.This is my requirement.
I have copied the standard workflow WS12300113 and customized the workflow to send the notification to the appraisee. I have customized the business object APPR_DOC . I am using the custom event and the event linkage is activated.
The manager from MSS select the employee and workflow is triggered. The mail notification will send a mail to the appraisee(employee) ,stating
Dear Appraisee Name,
Please schedule a meeting for a Crucial Conversation on your Tasks & Targets Setting/Review with your Line Supervisor.
Kindly update appraisal document with agreements from the meeting.
Your Appraiser is Appraiser Name.
Since i am new to workflow , confused with passing the recipient type(employee) from container an help d the name of the manager and employee name marked in red.
Kindly help me out with thisHi Paul ,
Thanks for the concern!
I created a custom class taking import parameters as appr doc id and plan version.
I am passing these parameters to HRHAP_APPER table and fetching the extended id(field id)
I am passing this extended id to bapi "BAPI_EMPLCOMM_GETDETAILEDLIST ".
Here i am getting multiple entries . using subtype '0001' i will getting username and
with subtype '0010' i will get email address of the manager.
Passing username fetched from above step into bapi HR_GETEMPLOYEEDATA_FROMUSER
i will get the name of the manager.
I HAVE DONE BINDING OF METHOD PARAMETERS WITH TASK CONTAINER .ALSO TASK CONTAINER ELEMENTS WITH WORKFLOW CONTAINER ELEMENTS.
BUT MY CONCERN IS I AM NOT GETTING ANY VALUES FROM HRHAP_APPER TABLE .
Can you help me with an alternative solution,where i can get user id based on appraisal id and plan version ??
Maybe you are looking for
-
Only Able to Wirelessly Sync Palm Centro One-Time Before Needing to Reboot My PC to Sync Again
I'm using a Bluetooth dongle to sync between a Palm Centro and my PC, which uses the Windows Vista 64-bit and Outlook 2007. After an unbelievable four hours on the phone with Palm support, I was able to synchronize wirelessly because that was the onl
-
bonjours je viens d'acheter un ipad 2 et je voulait savoir si je peux connecter la AirPort Express sur un disque dur externe pour avoir plus de capacité de memoir sur mon ipad et merci d'avance
-
Which command we use to check root privileged users in solaris
Hi, please tell me ,if i want to check the number of people using super user privilege in the sun solaris server .how we can find that ? ,is there any command to find that ? please reply me boby
-
Java.sql.PreparedStament
when i use the java.sql.statement i cant create it with scrollable property. like this: // Create a Statement object that will be used to excecute the query. // The arguments specify that the returned ResultSet will be // scrollable, read-only, and i
-
[SOLVED] G602 Gaming mouse extra buttons detected as keyboard keys
I have a Logitech G602 mouse with a bunch of extra buttons. I am familiar with xmodmap, xinput, xbindkeys, and easystroke. If I use xev to test for input events, my back/forward buttons work like most mice- I get values of button 8 and button 9. Howe