Quality inspection error

Dear Sir,
I have made PO and GR while doing GR i have maintained Quality Inspection at item level using particular material .Quality management is maintained for that material. and now when i use TCode QA32 , clicking on Usage Decisions its show error "The function you selected cannot be carried out. Access usage decision "
Please help....

Hi
Check the following setting
Check the Status of lot.It must be REL.
If it is CRTD then
1.Go to QA02>enter lot>click on Inspection specification-->check task list is attached.
( if task list date of creation is prior to that of creation of inspection lot task list will not attached.Also check the usage.)
save
check status now it must REL
Also
In QM view
check on....
Check Char & auto assignment.
I hope this will hepl

Similar Messages

  • Quality Inspection Error in MIRO for Invoice Verfication

    Hi Every Body,
    Actually we are able to pass the invoice for UD quantities (except Rejected quantities) after final inspection .Its ok and standard but we face the problem where we have to return the rejected goods for the vendors separately
    And we mapped the process for return the goods with separate return PO and pass the credit memo for vendor billing so for return we pass separate entries that 's why intially we need to pass 100% invoice (not only for accepted quantites) but here system does not allow to pass whole , 100% quantities invoice , please suggest me some way how we pass for whole quantities  invoice verification and can remove here quallity inspection error..
    Thanks,
    Dharmveer

    Withdrawn

  • Error - Invoice is blocked for quality inspection.

    While making payment to vendor the error shown - Error - Invoice is blocked for quality inspection.
    Can anybody help ?

    This is caused by customizing of QM in procurement.
    You can only pay if the material is released from quality status.

  • How to scrap specail stock in quality inspection...

    hi guys:
    I have a query, Is there any possible way to scrap the sale order stock in quality inspection without transferring it to the unrestricted stock and that also through inventory count(mi01,04,07),
    Actually we have damage lighting stock which is received against sale order(automatically transferred to quality inspection), and customers are replaced with new units, then this stock is called back in head office, for this we have a complicated process in use, first this stock is scraped from suppose "a" storage location after transferring it to unrestricted, then loaded back to "a", to make an STR for it from Head Office.
    So is there any way to scrap all special stock(complete storage location) against different sale orders at one go. whether the stock is available in unrestricted, quality inspection or blocked stock.
    I hope I am understood.
    Please help me to get through this complicated process.
    Regards
    Salar...

    Thx you guys are fantastic; I appreciate your help;
    below given is the post which has helped me, but there is some problem at the end, after the click of this point "11. (Click) in the gray box next to the session name and click . " there was nothing to proceed with, though I have posted the count through mi24 and post the difference with mi07, but still want to know what goes wrong with mi31, I have given the appropriate time for back ground processing....one thing to note there were 2 old inventory documents seen to be pending of the same storage location I was posting the count off, is this the reason of problem in processing of mi31,,,,,,please guide...
    Hi Buddy This transaction is used to create physical inventory documents for multiple materials in your plant and storage locations. Inventory documents may be created and printed prior to the count date; however, the posting block should not be set until the day of the actual physical inventory count. 1. From the SAP R/3 System screen, enter transaction code MI31. 2. Click or press Enter. The Selected Data for Phys. Inventory Docmts w/o Special Stock screen displays. 3. Enter or select a value for each of the following required fields: - Plant (enter plant code) - Storage location (do one storage location at a time) - Name of session Remove the checkmark from the Materials marked for deletion field will exclude items previously marked for deletion from the inventory document. The default session name is MB_MI01. Enter your initials and the session number after the default session name to identify it as your own. Example: MB_MI01_WW1 - Max. no. items/doc - use 99 for main storage location; - use 300 for truck storage locations. - Planned count date - enter date of inventory count - Physical inventory number - enter fiscal year followed by plant number and storage location. Example: 2004FY60118071. MI31 Create Physical Inventory Documents (in batch) - Set posting block - check if count is immediate; do not check if creating batch documents ahead of the inventory count date. - Sorting u2013 click on and select Plnt- Stor.bin description-Material. 4. Erase any variants under u201CDisplay optionsu201D. 5. Click . The Batch Input Created for the Creation of Phys. Inv. Docmts screen displays. Enter through any system information messages or errors. 6. Click . The Batch Input: Session Overview screen displays. 7. Click in the gray box next to the session name to highlight row. Click . The Process Session {Session name} dialog box displays. 8. Select the Background radio button. 9. Click . The following message displays: u201CX session(s) transferred to background processingu201D. It takes approximately 5 to 6 minutes for the system to process a batch session. Please wait at least 5 minutes before continuing with Step 10. 10. Click in the gray box next to the session name and click . The Batch Input: Log Overview screen displays. 11. Click in the gray box next to the session name and click . The Batch Input Log for Session {Session name} screen displays. If the batch processing is completed the last line in the Message column should read u201CBatch input processing endedu201D. If this message does not appear on the last line adequate time was not provided for the batch process to be viewed. SAP continues the batch processing in the background. Use transaction MI24 to retrieve a complete list of Physical Inventory Documents created. 11. Record the physical inventory document numbers created. You will need the document numbers to print the inventory documents. Clicking on can print this list. 12. View the log for any errors generated. A material master record being blocked for updates at the time of processing may cause errors. Add the material to a physical inventory document using transaction code MI02. Regrds Yogesh
    Thanks & Regards
    Salar...

  • Deficit of BA stock in Quality Inspection

    Hi All,
    I have a situation that's a bit complicated.  I hope I don't confuse anyone.  I'm trying to do a UD for an item, but I'm getting a Deficit of BA stock in quality inspection. 
    We purchased 200,000 of an item and a GR was done.  This was done during inventory, the item was physically counted and someone made an error in the count.  At that point an inventory adjustment transaction was done deducting 151,000 from inventory, leaving 49,000.  I believe that somewhere in this mess someone cancelled the material document that was created when the 200,000 was received in the first time, so technically, the 49,000 doesn't really exist in the system. 
    Later that day, when it was discovered that the physical count was entered incorrectly, the inventory adjustment transaction was also reversed.
    As a result of the above we now have two inspection lots hung up in QI, one for 151,000 and one for 49,000, and we can't seem to get rid of them.
    When we attempt to do a usage decision we get the following error message:
    "49,000 EA incorrect posting to block stock, error msg:
    Deficit of BA stock in qual. insp 49,000 ea:"
    BTW, none of these quantities (The 49,000 or 151,000) shows up in MMBE.   We've tried posting the stock in QA32, but of course it doesn't exist.  What are we missing?

    Hi Xamaica,
    If lot status is ' REL CALC SPRQ' that means  this lot is not canceled, you should be able to post.  If  the lot status would have been  LTCA then selection profile will help you in filtering canceled lots.
    please  give inputs  on following:
    We purchased 200,000 of an item and a GR was done.
    Have you posted the stock of 2 lacks  to unrestricted and then later  inventory was done ?
    This was done during inventory, the item was physically counted and someone made an error in the count. At that point an inventory adjustment transaction was done deducting 151,000 from inventory, leaving 49,000.
    Since system allowed you to do inventory  that means stock of  2 lacks was available that time in unrestricted.
    I believe that somewhere in this mess someone cancelled the material document that was created when the 200,000 was received in the first time, so technically, the 49,000 doesn't really exist in the system.
    If inventory is done and only 49000 stock is remaining, document can't be canceled, may be somebody must  have again  done inventory  and removed that  49000 also.
    Later that day, when it was discovered that the physical count was entered incorrectly, the inventory adjustment transaction was also reversed.
    As a result of the above we now have two inspection lots hung up in QI, one for 151,000 and one for 49,000, and we can't seem to get rid of them.
    I still believe that the status can't be   REL CALC SPRQ, one more thing, you said  you purchases 200,000 then how you get  two  lots of  151000 and 49000?  what insp type  is activated please  confirm?
    If stocks  are not available then  you should Block the lot  as  nothing is required from this lot.
    If status is 'REL CALC SPRQ'  then go to MIGO and cancel that document strait away.
    Pl check and revert.
    Best Regards,
    Shekhar

  • Inspection setup maintained while stock in quality inspection

    Dear Consultants,
    While having stock in quality inspection we were still able to maintain the inspection setup in QM view of that material in that plant.
    Actually the system should have thrown error "To activate QM, the inspection stock for the material must be empty". But some how this is not happening.
    Kindly provide solution.
    Regards,
    Ninad.

    Hello Ninad,
    You can activate an
    inspection type under the following conditions:
    If it is not stock-relevant
    If it is stock-relevant and at least one active stock-relevant inspection type exists
    If it is the first stock-relevant inspection type and no inspection stock exists, or if you set the indicator Activate despite insp. stock
    above lines are copied from
    https://help.sap.com/saphelp_46c/helpdata/en/2d/350ef6448c11d189420000e829fbbd/content.htm
    Your scenario falls in 2nd condition. You can activate inspection type if it is stock-relevant and at least one active stock-relevant inspection type exists.
    Amol.

  • How to Clear Stock From Quality Inspection

    Dear Sir,
    We have following problem scenario :
    In the Quality View the wrong type of Inspection Type was given and subsequently during MIGO as  the "Quality Inspection" option was selected under Stock Type , so after MIGO stock got posted under Quality Inspection  and no Inspection Lot was created .
    Now we want to clear the Stock from QI to either Un-restricted or any other type , so that material can be cleared and brought to Un-restricted Stock  ultimately .
    We tried to use MB1b with movement type 321 , but it given error as "Change the inspection stock of material CJMC1A0477 in QM only" .
    I request you to kindly guide me as how can the Stock be cleared from QI .
    With Thanks and Regards
    B Mittal

    Hi ALL,
    I'm also facing the same issue. In material master QM view : Q M Procurement activity deactivated and Inspection setup also deactivated.  This is not a proper way to solve the issue anyway i have deactivated, but still i am facing same issue.
    Please anybody can help on this...
    Regards
    Chandru.

  • More Quantity of Raw Material noticed in Quality Inspection

    Dear Experts,
    We have done GR against the PO for a material. But in Quality Inspection, we have noticed that there is excess quantity of stock received which is more than the inspection lot quantity.
    My issue is that inspection lot quantity will be created for the same quantity for which GR has been done.
    I can not post more quantity than the inspection lot quantity. So how to post the excess quantity into stock?
    Please suggest.
    Regards,
    Phani

    Dear Sujit,
    Thanks For the quick reply.
    While performing the same, as suggested by you, I am getting the error
    PU Ordered quantity exceeded by 300 M : MPXSXWRT 1100 1104 1000009071
    Message no. M7022
    Diagnosis
    The specified stock level or quantity is exceeded by 300 M.
    System Response
    If the message is an error message (E), the above is not allowed.
    If the message is a warning message (W), the system will allow your input, but the warning is intended to prevent you entering a wrong quantity
    But, I have already maintained in OMCQ transaction for Message 022, Application area M7 as u201CWu201D.
    But still the system is giving an error message.
    Hi Kent9999,
    I didnu2019t understand how QP02 will help me.
    Regards,
    Phani

  • Transfer posting stocks from quality inspection to unrestricted, problem

    Hello Guys,
    kindly help me i am having problems doing transfer posting (mb1b) using movement type 321. because in my stock overview (mmbe) thera are stocks in Quality Inspection, i want that to be trasfered in Unrestricted Stock. that's why i execute transfer posting but there is an error occured doing it so. the error is "change the inspection stock of material 1078 in QM only". how could i make this stocks transfer to unrestricted?
    please advise me the correct way to settled this.
    thanks and regards,

    Hello Guys,
    I am very thankful for all of you contributing to this thread of mine hope in some other time you can work it out with me again I already done all this resolutions you have mention and I also know that is all the right wya to solve this issue but i dont see my problem exists on the configuration in material tpye allocation because in our business sample the FERTin standard SAP but with us it is customized name, have different code it was not define in TLtype in material allocation for quality inspection (Q), now i know what to do to call our admin to authorized my config there.
    Thank you so much i will closed this thread now please help me in some of other query next time. hehehehe..
    Regards,

  • Return posting to quality inspection stock

    Hi QM Gurus!
           How can i post from unrestricted to quality insp stock? I am trying to use movement type 322(quality insp to unrestricted-reversal) and an error message says "Change the inspection stock of material 1101 in QM only".
    When i activated the inspection type 08 (stock transfer inspection), the movement type 322 works. However, when i do transfer posting from one storage location to another, an inspection lot is created.
    So my problem is, how do i allow posting from unrestricted to quality insp stock and no inspection lots are created when i transfer the material from one storage location to another???
    I would appreciate if anyone could help me.
    Regards,
    Heinrick Palad

    hi heinrick
    you can reverse the stock positing providing following prerequisite have been meet,
    A usage decision has been made for the inspection lot.
    The goods in the inspection lot have been posted from inspection stock to blocked stock or unrestricted-use stock.
    If you posted the goods to a stock other than blocked stock or unrestricted-use stock (for example, to scrap), you must first post the stock back to blocked stock before you can reverse the original stock posting.
    Reversing Stock Postings
    Choose Logistics ® Materials Management ® Inventory Management ® Goods Movement ® Goods receipt ® For purchase order ® PO number known.
    The initial screen for creating a goods receipt for a purchase order appears.
    In the field for the movement type, enter 102 (goods receipt for a purchase order into warehouse - reversal).
    In the field for the purchase order, enter the purchase order number for the original goods receipt.
    You can copy the purchase order number from the inspection lot.
    Choose Enter to display the selection screen for the purchase order items.
    Select the purchase order item for which you want to create the goods receipt and set the Stock type indicator to the stock to which the goods were originally posted with the usage decision (for example, F for unrestricted-use stock or S for blocked stock).
    Save the goods receipt and exit the Materials Management component.
    Choose Logistics ® Quality management ® Quality inspection ® Inspection lot ® Usage decision ® Change with history.
    The initial screen for changing a usage decision appears.
    Enter the number of the inspection lot for which you previously made the usage decision and choose Usage decision (UD).
    To cancel the inspection lot, choose Usage decision ® Functions ® Cancel lot in the usage decision screen.  
    regards
    thyagarajan

  • Quality inspection without order confirmation

    hi ther ........
    I have created a process order & released it.
    Now I am able to do quality result recording in QEN51N & Usage dicision in QA11 without process order confirmation.
    how come this is possible without system throwing any kind of error ?

    hi kaushik,
    Regarding the inspection type details u can get in
    SPRO->Quality Mangement->Quality Inspection->Inspection Lot Creation->Maintain Inspection type.
    It gives the list of inspection types.
    For more info.
    http://help.sap.com/saphelp_47x200/helpdata/en/89/9bb43418e43b4ae10000009b38f83b/frameset.htm
    Cheers
    Alfred
    Reward with points if it is helps.

  • Occasional quality inspection stock in production order

    Hi experts,
    I have QM activated to material with 03 and 04 control type but, in 04 control type I didnu2019t select u201CPost to Inspection Stocku201D because normally production stock go to unrestricted stock. But, in some productions I need that stock go to u201CInspection Stocku201D. How can I do to doing this in some productions orders?
    Thanks
    J.N.

    Thanks by your answer
    Whats happen is that in some production versions we need that production stock entry to quality inspection. Before activate QM to this material in my production order I can change Control stock type (in Goods Receipt tab) to "Quality Inspection". Now systems give me an error message when I change this field.
    Other option is in MIGO (Good Receipt > Order) change stock type to "2-Quality Inspection" but when I save the document system change this option to "Unrestricted use".
    Can anybody help me?

  • Movement Type 321/322 for Quality Inspection in warehouse

    Hi Experts,
    I have stock of 950 To in Leanwarehouse in plant. I wanted to move 50 TO material or Quality Inspection to same leanwarehouse 0001 by movement type 321 but it throw error
    Deficit of SL Stck.in qual.insp 11 TO : 1727 4040 0001
    In MMBE I saw the stock for the same material. Why there is an error? It is also not blocked.
    While I tried with movement type 322 it got accepted.
    Can anyone explaing the reasons for this I shall appreciate.
    Thanks for your time.

    Hi, it's better to ask on logistic forum.
    Did you see in MMBE  required value of material at Quality Inspection on entered storage location?

  • QM- Stock en quality inspection

    Hi gurús,
                   Some units of material still been in quality inspection but the used decision for the inspection lot for this material and batch already exist.
    When we try to do a 321 movement type from transaction MB1B to move the material from quality to unrestricted stock, the system display the error message "Change the inspection stock of material MP.0V961 in QM only".....But the inspection lot had the used decision already taken
    ¿How can we transfer the stock from quality inspection to unrestricted stock?
    Thanks in advance for the help
    Regards
    Enzo

    Option 1: What you can do is deactivate QM for this material temporary. Move the stock from quality to unrestricted then and activate QM again.
    Option 2: Add a new inspection type 04 to the material. When you transfer post the material it creates a inspection lot where you should make a decision for. When you did this delete inspection type 04 again.
    Option 3: You have somehow wrong entries in a table. I had the same here, when i wanted to transfer post sales order stock unrestricted with a mvt 311 to another storage location i got the same error.
    I created a SAP note for that and this was the reaction:
    the error message is indeed not justified.
    It is caused by a faulty entry in control table T156M.
    Display T156M using se16 with key BUSTM='MAA7'. You get 6 entries.
    Change the display in order to show table field LBBSA:
    BUSTM ZUSTD CNT02 LBBSA
    MAA7 01 01
    MAA7 02 02 <<<< wrong! LBBSA should be '01' for this line
    MAA7 0 01 08
    MAA7 0 02 08
    MAA7 2 01 01
    MAA7 2 02 02
    the same table entry has two more invalid settings, fields SMSKA and
    SMSSA:
    T156M key BUSTM MAA7
    ZUSTD
    CNT02 2
    ->
    SMSKA AQ1 -> should be A01
    SMSSA ASQ -> should be ASL

  • Posting change from Unrestricted to Quality inspection

    Hi Experts,
    Help please.
    I am trying to do posting chnage using MB1B transaction (322 Mvt type). But I'am having an error : "Change the inspection stock of material XXXX in QM only".
    I do not know what this error means, Please someone help me.
    Initially, the material was received in "Quality inspection", but it was already been moved to Unrestricted. But now, we are having problem in doing posting change from Unrestricted to Quality inspection.

    as the collegues already said. when QM is active you cannot do manual QM transfer postings.
    But you can do a MIGO with 102, to cancel the receipt. (you have to change the proposed quality status in item detail  from Quality to unrestricted before you can do this)
    Then you can receive it again the standard way. It will again go to Qualtity inspection and create an inspection lot .

Maybe you are looking for