Quality inspection for the Operation

Hi Gurus,
I have multiple operation routing here which is having operation 010, 020,030 ,040 ,050 .
client requirement is that they want to have the quality check at each operation .
usage decision at each operation but result recording at the specific operation like 040
How can i achieve it .

Hi
1. You have to use the inspection type 03 ( In-process inspection)
2. It is possible for results recording at a specific operation. You have to assign the MIC in the particular operation for which you want to do results recording.
3. Giving usage decision for each operation is not possible in Standard SAP. Because only one inspection lot will be generated for an order, in the same lot you have to do the results recording by selecting the required operation. But usage decision is possible for the whole inspection lot only not for each operation.
Regards
Bala

Similar Messages

Quality Inspection for the 1st time Receive of Batch

Hi all.
My requirement is just to do the quality inspection when the Batch(MCHA-CHARG) is received in the first time in MIGO.
No quality inspection is required for next & consequtive goods receive for the same batch.
for the 1st time receive, the stock will go to quality inspection stock for any batch of a material. From the next time , the stock will go directly to unrestricted stock without quality inspection. is it possible? plz advice.
Thanks
pabi

Hi Pabi,
I am not sure if this will help you, but here are the three options that you might want to consider:
- Source inspection. The idea here is that an IL is created for a purchase order prior to GR. All subsequent receipts for this PO can be configured to skip inspection.
- Control if insp. lot in material master (insp. set-up). In this case, the system will not create new insp. lot, if there's already one open for the same batch - it will merely add the qty of the new GR to the same open insp. lot.
- With dynamic modification you can let the following receipts of the same material from the same vendor to go without QI, but you can't fine-tune it by batch.
I know this is not the same what you want, but I can't recall at the moment a function that will satisfy your requirement exactly.
BR
Raf
Edited by: Rafael Zaragatzky on Aug 7, 2011 4:32 PM

Quality inspection for the items issued for Sales order

Hi, How to map the qc for the items issued for sales order?

Dear Yadav,
-Activate insp type 10 in the Material Master-QM view insp setup (MM01)
-Create Inspection plan (QP01) with usage as Goods issue & assign Insp characteristics
-Create Sales order (VA01)
-Delivery against the Sales order (VL01N) or through sales order menu. Delivery Insp lot gets created after Delivery is made.
-Do results recording and take usage decision (QA32)
Note:
-This inspection is non stock relevant inspection. There will be no stock posting through Quality Management.
-Post Goods issue in the delivery can be made only after taking the usage decision.
Regards,
Keerthi.

Quality inspection for external opearatio

Experts
One of my product having one operation in externel
Once it coming back after the externel operation confirmation is happening(here material number is not changing)
In this point i want to create a inspection lot on confirmation
how we can achieve this what is the inspection type we want to give
Give me a details step
Faisal

Hi Friend ,
Procedure for Quality inspection for external operation is :
1) Assign the operation in routing which is done external processing
control Key : PP02 ( External processing )
Click on indicator : Insp char. required.
Hence when production order is released for above scenario , double click on the operation and click on create PR.
Than PO from PR.
material is relaesed for external processing agianst PO .
when material is get external processing and come in through GR . Material goes to quality stock.
after quality ok , its come in unrestricted stock.
Regards
Vinod

Inspection RR should be allowed for the operation confirmed qty only

Hi Friends
I have one requirement , Inspection results recording should be allowed for the operation confirmed qty only
i.e
    1. Release Production Order for 100 qty
    2. Inspection Lot created for 100 qty
    3. Production Confirmation done for 1st operation for 50 qty
    4. Next operation is testing or Quality inspection
    5. Used 03 insp type(WIP inspection)
    6. Result Recording should be allowed only for 50 Qty
    7. If i go for 51, system should give message(i.e confirmation not done for 51)
    8. Usage decision saved for 50 qty, Remaining 50 qty,we have to do separate RR & UD once confirmation done
Please let me know the settings,
Thanks & Regards
Gajendranath

Hello Gajendra
Please find my inputs
1) PLease activate in OPK4 for the production order type these 3 setting
a) Operation sequence : Error when operation sequence is not followed
b) Overdelivery : Error when overdelivery tolerance is exceeded
c) Results Rec. (QM) : Error message if no insp. result exists
by doing this a) you make the sequence of operation mandatory. no body can confirm operation no 30 without confirming 10 & 20
b) if you have confirmed 50 in the first operation, you cannot confirm more than 50 in second operation
c) it will not allow you to confirm through C011n if the result recording is not done
2) Kindly understand for 03 inspection the lot quantity will be of 100 (PO quantity as in your case). so it is impossible to give UD for 50 quantity and then do the UD for the rest of the quantity.
UD is for the lot and not for the confirmed quantity. And please note for 03 inspection confirmation holds the importance rather than the UD
So use 03 for intend of its use
Regards
Gajesh

Inspection for second operation

hi all
i have maintain inspection orgin 03 & 04 for sfg material in material master also in routing i have assign control key having inspection check box on for the 03 line item (0010,0020,0030).
my first operation shows perfect inspection lot after production order release. but when i go for the second operation it does not works and it show no inspection characterstics maintain for the operation, though i assign inspection characteristics to the operations.

Dear.
In mm02, choose qm view.
Choose QM proc then click inspn setup tab.
04 for final inspn (after prodn)
03 for roh. & click active.
2. QS21 create MIC
3. In the routing choose first operation & choose inspn characteristics & choose eg.Legth & then sample as (eg) fixed sample. Go for second operation do the same tining.
4) For final insp create quality plan in OP01.
Then when you realse order then system will create one insp lot for inporocess in that you will get two operation and go ahead.
Hope clear to you.
Regards,
R.Brahmankar

Reg., Quality Inspection at the time of Goods Receipt against the P.O.

Hi
Pls provide the procedure for the "Quality Inspection at the time of Goods Receipt against the P.O."
Thanks in advance.
Regards
Ravi

Answers:
1.Our client wants that he want to send back to Vendor, In which way we have to do in SAP?
In QM,Raise notification for rejected qty in special stock, this will carry task of return delivery.
2. Without Quality inspection User shouldn't do the MIRO?
User discipline only it will be solved or
Prepare user exit with help of ABAP'r
while goods receipt(MIGO) for all scenarios(under delivery/over delivery/rejected) in development,
Check MIRO for QC passed qty is allowed for bill booking, give meaningful messages for all scenarios.
3. Quantity was certified by 13 only, so the user should do the MIRO for 13 only, Kindly suggest iIn which way we have to configure in SAP?
Do return delivery for rejected quantity(2),if there excise,reverse it thru J1IS.
After finishing above steps,Wheu u do IV only Quantity 13 will flow.
Invoice verification will be done only for the accepted quantity.
Above solution will solve problem.
Edited by: Jeyakanthan A on Jan 11, 2010 12:01 PM
Edited by: Jeyakanthan A on Jan 11, 2010 12:02 PM

Transaction code to know stock lying in quality inspection(for UD)

Hi,
Pl let me know transaction code to know stock agaisnt materials lying under quality inspection ( for UD ) for more than one materials or plant wise or pgrp wise or sloc wise ....
Thanks
Arul Murugan

Hi,
In QA33 Transcation code ,Enter the lot creation ,In list settings select ,Only lots without usage decision and execute.
In the layout select Quantity to be posted(Quality stock).This will give the list of Inspection lots against the material to be posted to Unrestricted or blocked stock.
Manoj.N

Quality Inspection for a Movement Type 103 , change batch when doing QA11 .

Hi all,
I activated Quality Inspection for a Movement Type 103 . When do MIGO(GR 103) reference to PO ( include material A, qty 100 PC), it will create insp lot. Material A needs batch management.
1st time use QA11 to post 50 PC to stock, it will create a new batch( or you can select a exist batch ).
2nd time use QA11 to post another 50 PC to stock, it will use the batch 1st time used, and you can't change this batch number .
The question is : how to change batch number at the 2nd time ?
Thanks.

Hi,
Pls. check that how u have configured the new batch number in configuration for goods movement.

Getting " Not enough memory for the operation error " in BOE

Hi,
We are using BOE 11.0.
we try to schedule a new report with multiple database logins for testing in BOE. When we run the report we are getting error like "Not enough memory for the operation error"
The same report has been executed successfully when we run using Crystal reports developer. The report is fectching less than 10K records from all the databases together.
Please let me know which is causing the issue and also let me know is there any limit in the number of databases connecting for a single report.
many thanks in advance for all your help.
Cheers,
Suri ;-)

Hi Sarthan,
Sorry. I'm new to BOE. We know only scheduling the reports creating folders etc. :-)
I've seen one parameter "Maximum Cache Size Allowed (KBytes)" and the value for this parameter is 5000.
If we change it to a big number whether we can solve the issue ? Please suggest.
Cheers,
Suri ;-)

How to define JMX policy for the operation ALSBConfigurationMBean.getRefs

Hello,
I'm trying to configure the JMX policies of my Weblogic Server.
I have followed the recommandations from the http://docs.oracle.com/cd/E13222_01/wls/docs100/ConsoleHelp/taskhelp/security/DefinePoliciesforMBeans.html link.
I try to run the following code on a client side :
ALSBConfigurationMBean lConfigMBean = (ALSBConfigurationMBean) lDomainMBean.findService(ALSBConfigurationMBean.NAME, ALSBConfigurationMBean.TYPE, null);
lConfigMBean.getRefs-BusinessServiceQuery);
I got the exception :
Caused by: weblogic.management.NoAccessRuntimeException: Access not allowed for subject: principals=[], on Resource com.bea.wli.sb.management.configuration.DelegatedALSBConfigurationMBean Operation: invoke , Target: getRefs
     at weblogic.management.mbeanservers.internal.SecurityInterceptor.isAccessAllowedInvoke(SecurityInterceptor.java:1173)
     at weblogic.management.mbeanservers.internal.SecurityInterceptor.checkInvokeSecurity(SecurityInterceptor.java:813)
     at weblogic.management.mbeanservers.internal.SecurityInterceptor.invoke(SecurityInterceptor.java:443)
     at weblogic.management.jmx.mbeanserver.WLSMBeanServer.invoke(WLSMBeanServer.java:323)
     at weblogic.management.jmx.MBeanServerInvocationHandler.doInvoke(MBeanServerInvocationHandler.java:544)
     at weblogic.management.jmx.MBeanServerInvocationHandler.invoke(MBeanServerInvocationHandler.java:380)
     at $Proxy154.getRefs(Unknown Source)
     at com.csg.cs.services.tech.TECH_RegistryService_1_RegistryPortImpl.getServiceRef(TECH_RegistryService_1_RegistryPortImpl.java:224)
     at com.csg.cs.services.tech.TECH_RegistryService_1_RegistryPortImpl.lookup(TECH_RegistryService_1_RegistryPortImpl.java:117)
     ... 63 more
And so I want to setup the JMX policy to give the rights to my client. But in the JMX Editor the ALSBConfigurationMBean doesn't exist, and I don't know which bean I have to set up.
Anyone do know where I can find how to define policy for the Operation "getRefs" of the "ALSBConfigurationMBean" ?
thanks and regards

OEG provides several filters for encryption (XML, S/MIME and PGP). It's also possible to accept client certificates via 2-way SSL or route to a destination over 2-way SSL. For further information check out the OEG docs.

Upgrade OM 2012 to SP1 Beta - Version of SQL Server for the Operational Database and the Data Warehouse

Hello,
When I try to verify the prerequisites to upgrade my SCOM 2012 UR2 Platform to SP1 Beta, I have these errors :
The installed version of SQL Server is not supported for the operational database.
The installed version of SQL Server is not supported for the data warehouse.
But when I execute this query Select @@version on my MSSQL Instance, the result is :
Microsoft SQL Server 2008 R2 (SP1) - 10.50.2500.0 (X64) Jun 17 2011 00:54:03 Copyright (c) Microsoft Corporation Standard Edition (64-bit) on Windows NT 6.1 <X64> (Build 7600: ) (Hypervisor)
But
here, we can see that :
Microsoft SQL Server: SQL Server SQL 2008 R2 SP1, SQL Server 2008 R2 SP2, SQL Server 2012, SQL Server 2012 SP1, are supported.
Do I need to pach my MSSQL Server with a specific cumulative update package ?
Thanks.

These are the requirements for your SQL:
SQL Server 2008 and SQL Server 2012 are available in both Standard and Enterprise editions. Operations Manager will function with both editions.
Operations Manager does not support hosting its databases or SQL Server Reporting Services on a 32-bit edition of SQL Server.
Using a different version of SQL Server for different Operations Manager features is not supported. The same version should be used for all features.
SQL Server collation settings for all databases must be one of the following: SQL_Latin1_General_CP1_CI_AS, French_CI_AS, Cyrillic_General_CI_AS, Chinese_PRC_CI_AS, Japanese_CI_AS, Traditional_Spanish_CI_AS, or Latin1_General_CI_AS. No other collation
settings are supported.
The SQL Server Agent service must be started, and the startup type must be set to automatic.
Side-by-side installation of System Center Operations Manager 2007 R2 reporting and System Center 2012 Service Pack 1 (SP1), Operations Manager reporting on the same server is not supported.
The db_owner role for the operational database must be a domain account. If you set the SQL Server Authentication to Mixed mode, and then try to add a local SQL Server login on the operational database, the Data Access service will not be able to start.
For information about how to resolve the issue, see
System Center Data Access Service Start Up Failure Due to SQL Configuration Change
If you plan to use the Network Monitoring features of System Center 2012 – Operations Manager, you should move the tempdb database to a separate disk that has multiple spindles. For more information, see
tempdb Database.
http://technet.microsoft.com/en-us/library/jj656654.aspx#BKMK_RBF_OperationsDatabase
Check the SQL server agent service and see whether it is set to automatic AND started. This got me confused at my first SP1 install as well. This is not done by default...
It's doing common things uncommonly well that brings succes.

SP1 to R2 Upgrade - The installed Version of SQL Server is not supported for the operational database

Hello,
Am trying to upgrade a SCOM SP1 environment to SCOM R2( 3 MGT servers, 1 GW and 2 Web console boxes )
The prerequisites are failing and it is stating the following ;
Operational Database SQL Version Check - The installed Version of SQL Server is not supported for the operational database
Data Warehouse SQL Version Check - The installed Version of SQL Server is not supported for the data warehouse
The SQL servers are running SQL 2012 SP1 64 Enterprise, which is compatible.
All other pre-upgrade tasks have been done.
Help appreciated!

I'm having the exact same issue, I believe. I think that Tubble has problem with SCOM 2012. Not 2007.
I've checked the compatibility list for both SCOM 2012 SP1 and R2. All newer Windows Server and SQL versions are supported. We're running the SQL 2012 SP1 x64 Standard edition on a Windows Server 2012 Standard.
I even tried to move the database from SQL 2012 to an older SQL 2008 R2, but that's not supported either. Only upgrading. Not downgrading.
So, I started checking the opsMgrSetupWizard.log file for clues. And the error message was there as well. But the reason why it says not supported is that it can't get the info about the OS version, so I guess it assumes the OS version is to low. The RPC
service can not be reached.
[10:29:11]: Error: :GetRemoteOSVersion(): Threw Exception.Type: System.Runtime.InteropServices.COMException, Exception Error Code: 0x800706BA, Exception.Message: The RPC server is unavailable. (Exception from HRESULT: 0x800706BA)
[10:29:11]: Error: :StackTrace: at System.Runtime.InteropServices.Marshal.ThrowExceptionForHRInternal(Int32 errorCode, IntPtr errorInfo)
at System.Management.ManagementScope.InitializeGuts(Object o)
at System.Management.ManagementScope.Initialize()
at System.Management.ManagementObjectSearcher.Initialize()
at System.Management.ManagementObjectSearcher.Get()
at Microsoft.EnterpriseManagement.OperationsManager.Setup.Common.SetupValidationHelpers.GetRemoteOSVersion(String remoteComputer)
[10:29:11]: Debug: :IsSQLOnAValidComputer: remote OS version string was null or empty.
[10:29:11]: Error: :Error:IsValidSQLVersionCheck: SqlServer OS version is too low.
[10:29:11]: Debug: :**************************************************
[10:29:11]: Error: :<![CDATA[CheckPrerequisites: Logic Type:and IsValidOMDBSQLVersionCheck: 2]]>
[10:29:11]: Error: :
[10:29:11]: Error: :CheckPrerequisites: OMDBSqlVersionCheckTitle: Failed
[10:29:11]: Error: :
[10:29:11]: Debug: :**************************************************
[10:29:33]: Error: :GetRemoteOSVersion(): Threw Exception.Type: System.Runtime.InteropServices.COMException, Exception Error Code: 0x800706BA, Exception.Message: The RPC server is unavailable. (Exception from HRESULT: 0x800706BA)
[10:29:33]: Error: :StackTrace: at System.Runtime.InteropServices.Marshal.ThrowExceptionForHRInternal(Int32 errorCode, IntPtr errorInfo)
at System.Management.ManagementScope.InitializeGuts(Object o)
at System.Management.ManagementScope.Initialize()
at System.Management.ManagementObjectSearcher.Initialize()
at System.Management.ManagementObjectSearcher.Get()
at Microsoft.EnterpriseManagement.OperationsManager.Setup.Common.SetupValidationHelpers.GetRemoteOSVersion(String remoteComputer)
[10:29:33]: Debug: :IsSQLOnAValidComputer: remote OS version string was null or empty.
[10:29:33]: Error: :Error:IsValidSQLVersionCheck: SqlServer OS version is too low.
[10:29:33]: Debug: :**************************************************
So, in our case this was just a FW that was blocking some high ports between management server and SQL. I believe TCP port 135 also needs to be open.
Let's hope this fixes your issue as well, Tubble.
Have a great day!

Aleatory One factory fails for the operation "encode"-JPEG

I've a very strange problem with JAI.write using JPEG, but is happening aleatory. Some times it works, some times I get the exception and some other times don't. What I've seen is that when I got first this error, then all the rest of the images throws it. I mean, I'm working OK and then I got the exception, from there, all the images, no matter that they were not trowing exceptions before, now they do, so I don't know what is happening. I'll post some code snippets and the full stack trace of the exception. Hope you can help me:
First, I have a class that is a JSP-Tag:
RenderedOp outputImage = JAI.create("fileload", imgFile.getAbsolutePath());
int widthSize = outputImage.getWidth();
int heightSize = outputImage.getHeight();
try{
    outputImage.dispose();
}catch(Exception e){}
outputImage = null;That's the first thing, now, the second, this is a Servlet that writes the image to the browser (GetImageServlet its name, which appears in the stack trace):
FileSeekableStream fss = new FileSeekableStream(file);
RenderedOp outputImage = JAI.create("stream", fss);
int widthSize = outputImage.getWidth();
int heightSize = outputImage.getHeight();
if ((outputImage.getWidth() > 0) && (outputImage.getHeight() > 0)) {
                    if ((isThumbnail) && ((outputImage.getWidth() > 60) || (outputImage.getHeight() > 60))) {
                         outputImage = ImageManagerJAI.thumbnail(outputImage, 60);
                    } else if (outputRotate != 0) {
                         outputImage = ImageManagerJAI.rotate(outputImage, outputRotate);
                    OutputStream os = resp.getOutputStream();
resp.setContentType("image/jpeg");
     ImageManagerJAI.writeResult(os, outputImage, "JPEG");
                    outputImage.dispose();
                    os.flush();
                    os.close();
outputImage = null;
imgFile = null;The code of ImageManagerJAI.writeResult, which is a method I use above:
public static void writeResult(OutputStream os, RenderedOp image, String type) throws IOException {
          if ("GIF".equals(type)) {
               GifEncoder encoder = new GifEncoder(image.getAsBufferedImage(), os);
               encoder.encode();
          } else {
               JAI.create("encode", image, os, type, null);
     }And the full exception trace is:
Error: One factory fails for the operation "encode"
Occurs in: javax.media.jai.ThreadSafeOperationRegistry
java.lang.reflect.InvocationTargetException
     at sun.reflect.GeneratedMethodAccessor45.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at javax.media.jai.FactoryCache.invoke(FactoryCache.java:122)
     at javax.media.jai.OperationRegistry.invokeFactory(OperationRegistry.java:1674)
     at javax.media.jai.ThreadSafeOperationRegistry.invokeFactory(ThreadSafeOperationRegistry.java:473)
     at javax.media.jai.registry.RIFRegistry.create(RIFRegistry.java:332)
     at javax.media.jai.RenderedOp.createInstance(RenderedOp.java:819)
     at javax.media.jai.RenderedOp.createRendering(RenderedOp.java:867)
     at javax.media.jai.RenderedOp.getRendering(RenderedOp.java:888)
     at javax.media.jai.JAI.createNS(JAI.java:1099)
     at javax.media.jai.JAI.create(JAI.java:973)
     at javax.media.jai.JAI.create(JAI.java:1668)
     at com.syc.image.ImageManagerJAI.writeResult(ImageManagerJAI.java:27)
     at GetImageServlet.doGet(GetImageServlet.java:214)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:690)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:803)
     at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:269)
     at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:188)
     at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:210)
     at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:174)
     at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:127)
     at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:117)
     at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:108)
     at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:151)
     at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:870)
     at org.apache.coyote.http11.Http11BaseProtocol$Http11ConnectionHandler.processConnection(Http11BaseProtocol.java:665)
     at org.apache.tomcat.util.net.PoolTcpEndpoint.processSocket(PoolTcpEndpoint.java:528)
     at org.apache.tomcat.util.net.LeaderFollowerWorkerThread.runIt(LeaderFollowerWorkerThread.java:81)
     at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:685)
     at java.lang.Thread.run(Thread.java:619)
Caused by: com.sun.media.jai.codecimpl.util.ImagingException
     at com.sun.media.jai.codecimpl.ImagingListenerProxy.errorOccurred(ImagingListenerProxy.java:63)
     at com.sun.media.jai.codecimpl.JPEGImageEncoder.encode(JPEGImageEncoder.java:280)
     at com.sun.media.jai.opimage.EncodeRIF.create(EncodeRIF.java:70)
     ... 31 more
Caused by: com.sun.media.jai.codecimpl.util.ImagingException: IOException occurs when encode the image.
     ... 33 more
Caused by: java.io.IOException: reading encoded JPEG Stream
     at sun.awt.image.codec.JPEGImageEncoderImpl.writeJPEGStream(Native Method)
     at sun.awt.image.codec.JPEGImageEncoderImpl.encode(JPEGImageEncoderImpl.java:472)
     at sun.awt.image.codec.JPEGImageEncoderImpl.encode(JPEGImageEncoderImpl.java:228)
     at com.sun.media.jai.codecimpl.JPEGImageEncoder.encode(JPEGImageEncoder.java:277)
     ... 32 more
javax.media.jai.util.ImagingException: All factories fail for the operation "encode"
     at javax.media.jai.OperationRegistry.invokeFactory(OperationRegistry.java:1687)
     at javax.media.jai.ThreadSafeOperationRegistry.invokeFactory(ThreadSafeOperationRegistry.java:473)
     at javax.media.jai.registry.RIFRegistry.create(RIFRegistry.java:332)
     at javax.media.jai.RenderedOp.createInstance(RenderedOp.java:819)
     at javax.media.jai.RenderedOp.createRendering(RenderedOp.java:867)
     at javax.media.jai.RenderedOp.getRendering(RenderedOp.java:888)
     at javax.media.jai.JAI.createNS(JAI.java:1099)
     at javax.media.jai.JAI.create(JAI.java:973)
     at javax.media.jai.JAI.create(JAI.java:1668)
     at com.syc.image.ImageManagerJAI.writeResult(ImageManagerJAI.java:27)
     at GetImageServlet.doGet(GetImageServlet.java:214)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:690)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:803)
     at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:269)
     at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:188)
     at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:210)
     at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:174)
     at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:127)
     at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:117)
     at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:108)
     at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:151)
     at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:870)
     at org.apache.coyote.http11.Http11BaseProtocol$Http11ConnectionHandler.processConnection(Http11BaseProtocol.java:665)
     at org.apache.tomcat.util.net.PoolTcpEndpoint.processSocket(PoolTcpEndpoint.java:528)
     at org.apache.tomcat.util.net.LeaderFollowerWorkerThread.runIt(LeaderFollowerWorkerThread.java:81)
     at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:685)
     at java.lang.Thread.run(Thread.java:619)
Caused by: java.lang.reflect.InvocationTargetException
     at sun.reflect.GeneratedMethodAccessor45.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at javax.media.jai.FactoryCache.invoke(FactoryCache.java:122)
     at javax.media.jai.OperationRegistry.invokeFactory(OperationRegistry.java:1674)
     ... 26 more
Caused by: com.sun.media.jai.codecimpl.util.ImagingException
     at com.sun.media.jai.codecimpl.ImagingListenerProxy.errorOccurred(ImagingListenerProxy.java:63)
     at com.sun.media.jai.codecimpl.JPEGImageEncoder.encode(JPEGImageEncoder.java:280)
     at com.sun.media.jai.opimage.EncodeRIF.create(EncodeRIF.java:70)
     ... 31 more
Caused by: com.sun.media.jai.codecimpl.util.ImagingException: IOException occurs when encode the image.
     ... 33 more
Caused by: java.io.IOException: reading encoded JPEG Stream
     at sun.awt.image.codec.JPEGImageEncoderImpl.writeJPEGStream(Native Method)
     at sun.awt.image.codec.JPEGImageEncoderImpl.encode(JPEGImageEncoderImpl.java:472)
     at sun.awt.image.codec.JPEGImageEncoderImpl.encode(JPEGImageEncoderImpl.java:228)
     at com.sun.media.jai.codecimpl.JPEGImageEncoder.encode(JPEGImageEncoder.java:277)
     ... 32 more
Caused by:
java.lang.reflect.InvocationTargetException
     at sun.reflect.GeneratedMethodAccessor45.invoke(Unknown Source)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:597)
     at javax.media.jai.FactoryCache.invoke(FactoryCache.java:122)
     at javax.media.jai.OperationRegistry.invokeFactory(OperationRegistry.java:1674)
     at javax.media.jai.ThreadSafeOperationRegistry.invokeFactory(ThreadSafeOperationRegistry.java:473)
     at javax.media.jai.registry.RIFRegistry.create(RIFRegistry.java:332)
     at javax.media.jai.RenderedOp.createInstance(RenderedOp.java:819)
     at javax.media.jai.RenderedOp.createRendering(RenderedOp.java:867)
     at javax.media.jai.RenderedOp.getRendering(RenderedOp.java:888)
     at javax.media.jai.JAI.createNS(JAI.java:1099)
     at javax.media.jai.JAI.create(JAI.java:973)
     at javax.media.jai.JAI.create(JAI.java:1668)
     at com.syc.image.ImageManagerJAI.writeResult(ImageManagerJAI.java:27)
     at GetImageServlet.doGet(GetImageServlet.java:214)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:690)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:803)
     at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:269)
     at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:188)
     at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:210)
     at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:174)
     at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:127)
     at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:117)
     at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:108)
     at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:151)
     at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:870)
     at org.apache.coyote.http11.Http11BaseProtocol$Http11ConnectionHandler.processConnection(Http11BaseProtocol.java:665)
     at org.apache.tomcat.util.net.PoolTcpEndpoint.processSocket(PoolTcpEndpoint.java:528)
     at org.apache.tomcat.util.net.LeaderFollowerWorkerThread.runIt(LeaderFollowerWorkerThread.java:81)
     at org.apache.tomcat.util.threads.ThreadPool$ControlRunnable.run(ThreadPool.java:685)
     at java.lang.Thread.run(Thread.java:619)
Caused by: com.sun.media.jai.codecimpl.util.ImagingException
     at com.sun.media.jai.codecimpl.ImagingListenerProxy.errorOccurred(ImagingListenerProxy.java:63)
     at com.sun.media.jai.codecimpl.JPEGImageEncoder.encode(JPEGImageEncoder.java:280)
     at com.sun.media.jai.opimage.EncodeRIF.create(EncodeRIF.java:70)
     ... 31 more
Caused by: com.sun.media.jai.codecimpl.util.ImagingException: IOException occurs when encode the image.
     ... 33 more
Caused by: java.io.IOException: reading encoded JPEG Stream
     at sun.awt.image.codec.JPEGImageEncoderImpl.writeJPEGStream(Native Method)
     at sun.awt.image.codec.JPEGImageEncoderImpl.encode(JPEGImageEncoderImpl.java:472)
     at sun.awt.image.codec.JPEGImageEncoderImpl.encode(JPEGImageEncoderImpl.java:228)
     at com.sun.media.jai.codecimpl.JPEGImageEncoder.encode(JPEGImageEncoder.java:277)
     ... 32 moreI'm using JDK 1.6, Tomcat 5.5, Windows XP, and JAI 1.1.2_01 (the jars are in the WEB-INF/lib of the project AND in the jdk 6/jre/lib/ext, while the dlls are only on jdk 6/jre/bin)
Please help, I don't know what to do, I've weeks with this problem. Dukes available pleaseeee!

Hi
you can check if you get in the error logs an message like 'Could not load mediaLib accelerator wrapper classes. Continuing in pure Java mode.' may be the problem of JAI native accelerator

I get an error when trying to sync my music. It says I do not have enough access privileges for the operation.

I get an error when trying to sync my music. It says I do not have enough access privileges for the operation.

Follow this instruction exactly to the last line. It worked on mine.
Jolly Giant wrote:
daduser wrote:
"copying files failed, because you don't have permission to change your ITUNES media folder or a folder within it."
check if you have read & write permissions for your iTunes music (or media) folder. in finder, right-click on it and +get info+. unlock the little padlock (you may have to enter your admin password) and change the permission settings. if permissions settings check out, click on the little gear-shaped icon and +apply to enclosed items+ like so
now try consolidating again.

Quality inspection for the Operation

Similar Messages

Maybe you are looking for