Quality inspection lot creation during GR for STO

Dear Friends,
I have a Scenario for Quality inspection lot creation during GR with respect to STO
can use inspection type 01
or is there any other inspection type to create inspection lot during GR for STO
Thanks & Regards
Raj

Dear Friends,
when i maintain inspection type 08
Inspection lot is created in GR Plant
Thanks for that
but when i am moving the stock from Plant Sloc A to same plant Sloc B one more inspection lot is cretaed (movment type 311)
if i go to SPRO i can deactivate 311 movement type to avoid creating inspection lot
but it is client level , i need to restrict only for one plant
is there any other way to control just one inspection lot for one GR
if you are not clear with my writing pls do not hesitate to ask for more information
Thanks & Regards
Raj

Similar Messages

Inspection lot creation during STO return

Hello Gurus,
is there a trick to trigger inspection lot creation during STO return ?
Scenario is the following:
1 - Creation of STO
2 - Supplying plant ships materials... stock in transit
3 - Receiving plant receives materials
4 - Materials with defects -> Receiving plant add new line with return tick on the same material
5 - GI from Receiving plant... stock in transit
6 - Supplying plant receives materials -> Inspection lot has to be created
I used inspection type 08 on Receiving plant w/o success.
Many thanks.
Stéphane

No inspection lot is created when we return Materials to Vendor (Plant A) even if we maintain Inspection type 02.
Before STO customizing, Plant B creates a subcontracting purchase order. Next Materials are sending to Vendor (Plant A) and put in "Stock provided to vendor" (Transaction ME2O).
Vendor (Plant B) creates a Repair request (Sales document / Transaction VA01). Next run VRRE to reveice Materials to repair. Inspection lot is automatically created. The usage decision triggers the creation of Service order to manage all the repairing flow. Last step is to deliver Materials to Plant A and create Repair invoice.
Repair request supports all repairing flow (inspection lot, service oder...), especialy status (out of warranty or not).
After STO customizing, I expected the following result:
1° - Return STO to Vendor (Plant A) / ME21N with return tick
2° - Plant B ships Materials / MIGO wih 101 (SAP converts in 161)
3° - Stock in Transit
4° - Materials receive to Vendor (Plant B) / VL10B
5° - Creation Inspection lot
6° - UD triggered Service order creation
7° - ...Repairing flow with Service order...
8° - Materials ship to Plant B
9° - Repair invoice
10° - Stock in Transit
11° - Plant B receives Materials
As I said, there are 2 blocking points:
- Inspection lot not created when Vendor receives Materials
- Service order not created automatically (because no Repair request to support inspection lot, service order...)
Thanks a lot for your help.
Tell me if you have any questions.
Stéphane

Inspection lot creation during GR with respect to Purchase Order

Dear Experts,
Here is my Question
Inspection lot creation during GR with respect to Purchase Order
Inspection type 01 set in the material master
inspection lot will be created during GR for a Purchase order
from my understanding for every GR a inspection lot will be created
No batch Management
but the requirement is irrespective to GR qty and number of times of GR
we need inspection only one inspection lot
For Instance
There is a PO for 1000 kg no batch management
now i do GR for 100 kg for 10 times with different dates
now i need to have only one inspection lot
not 10 inspection lot for each 100 kg
can any one suggest a solution, please advise my understanding is correct
Many thanks
Raj

Dear Raju,
There is a solution for that .The setting can be done two ways, either in the material master or in the configuration
1) Material Master
MM02> QM View> Inspection Setup> 01> Control Insplot> 'X' An inspection lot for each purchase order item/order item 0r An inspection lot for each material document and material
a) 'X' An inspection lot for each purchase order item/order item
This Means
This setting is limited for use with the inspection lot origins 01 and 04.
An inspection lot is only created during the first goods receipt for each PO item or production order.
b) '1' An inspection lot for each material document and material
If you set this indicator, the system creates only one inspection lot for a material document (in a goods receipt transaction) for each material. This setting is useful, if several purchase orders or partial deliveries are processed for the same material in a goods receipt transaction.
2) You can do this default in the config
SPRO > Quality Management > Quality Inspection > Inspection lot creation > Define Default values for inspection type > 01> Control Insp lot
Hope this helps
Regards
gajesh

Inspection lot creation not required for intercompany Stock transfer order

Hi Team,
The client does not want system to create inspection lots for inter comapny STO. But for intra STO system does not create the inspection lot and thye are happy with it.
I have have flagged the indicator "QM not active' for the movement type
101 entry as below at transaction code OMJJ.
101 B(goods movement for Purchase Order) X(Stock Transport Order)
Even after flagging the above indicator, system is still creating the inspection lot at the time of GR for InterCC STO.
Are you aware any other place to control inspection lot creation for Inter company STO.
Thanks & Regards
Mangesh

The ispection types assigned to the material are given below.
Z05 Goods Return Inspection(copy of 05)
Z09 Shelf life extension Inspection(copy of 09)
Z89 Inspection for Quality Assurance(copy of 89)
Z90 Goods Receipt for Trading goods( It is a copy of 01 inspection type)
There is no inspection type 08 active in the material .
Thanks & Regards
Mangesh

Quality inspection lot creation at GIR

Dear MM/QM guru's........
Can you explain me in bref wat are the customizing setting in Quality managemnt and MM for creation of inspection lot the moment you go GIR and how to release the inspection lot..
Reagrds
SARFRAZ

hi sarfrazny,
first you have to activate the QM view in material and activate the inspection type in the material master .
inspection plan to be prepared
as soon as you process the the GIR a inpection lot will be created for which you have to record the result .
kindly look into this
<b>Inspection for a Goods Issue</b>
Purpose
The system can automatically create an inspection lot when a goods issue is posted in the system. A goods issue can be posted internally (for example, a material withdrawal from the warehouse) or to an external destination (for example, a goods issue to a customer). In a goods issue, the materials are usually withdrawn from unrestricted-use stock and posted to a cost center, project, customer, or other account assignment object. When the system creates an inspection lot for a goods issue, the inspection lot is not stock relevant.
Prerequisites
The system creates an inspection lot automatically for a goods issue if the following conditions have been met:
In Customizing for Inspection Lot Creation (Inspection for a Goods Movement) QM is active for the movement type.
QM is active for the material. This means that in the inspection settings of the material master:
In Customizing for Inspection Lot Creation (Inspection for a Goods Movement) QM is active for the movement type.
An inspection type is active for inspection lot origin 02 (goods issue)
The other indicators for the inspection type are set appropriately to meet your requirements for inspection processing (for more information, see Processing Inspection Settings)
Process Flow
The system creates an inspection lot automatically when the goods issue is posted in Materials Management (MM).
If the inspector will record results for inspection characteristics (controlled by the inspection settings in the material master), the system assigns an inspection specification (for example, a task list or material specification) to the inspection lot. If the system cannot find a specification or if more than one inspection specification is assigned to the material, you must assign a specification to the inspection lot manually.
If dynamic modification criteria are defined for the inspection lot origin or task list usage, the system checks the existing quality level for the material (and the other criteria, if applicable):
If a quality level is not available, the system creates one.
If the dynamic modification rule specifies that the quality level must be updated when the usage decision is made, the system does not update the quality level now.
If the dynamic modification rule specifies that the quality level must be updated when an inspection lot is created, the system updates the quality level now.
The system calculates the sample size.
If the sample calculation must be triggered manually (controlled by the inspection settings in the material master), you must call up the inspection lot in the change mode and choose the function to trigger the sample calculation manually.
If you are going to inspect the goods in the inspection lot using an inspection specification:
The system can print out the inspection instruction and/or sample-drawing instruction automatically when the inspection lot is created
You can print out the inspection instruction and/or sample-drawing instruction manually when you call up the inspection lot in the change mode
Result
You can use the information in the sample-drawing instruction and inspection instruction as a guide to:
Draw and prepare the samples at the work centers specified for each operation
Inspect the goods in the inspection lot
Record characteristic results and/or defects
When you have finished recording inspection results and/or defects, you can complete the inspection.
Result
When you have finished recording inspection results and/or defects, you can complete the inspection.
regards
thyagarajan

Quality inspection lot creation?

Hi All,
We are implementing the QM inspection functionality in our project. But we just want the QM inspection lot to be created when GR is done and then we will clear the lot with UD directly. We do not want to do any other processes like defects recording,inspection plan,sampling etc. before UD.
Can someone please tell me the required configuration for this and the settings required?
Regards,
V S

Dear Vs,
as per my understanding to ur question, u should tick the Post to ins.stock indicator in QM view.
By doing so, no lot will be created, only your stock will be posted to quality(inspection stock).
It'll appear in qty stock column in MMBE.
Now after u have completed the inspection, all u have to do is just go to MB1B and use mvt type 321 to post the stock to unrestricted.
I think it'll help u.
Regards,
Sandeep

Inspection Lot Creation after UD

Dear PP/QM Masters,
I have question regarding inspection lot creation after UD for the same batch number.
There will be several GR during one shift for one SKU with the same batch number.
F.E. shift (6 am to 2 pm) at 7 there will be first GR of finished good. Inspection lot is automaticly created and QA at 9 will make UD for this lot. If production will made GR after that a new inspection lot will be created for the same production batch.
Is there any possibility to make only one inspection lot even if UD is taken.
Thanks and regards,

I guess what bothers me is that for your selection of "2" you include date. Our standard SAP system does not include date on that key choice. Just material/batch/storage location.
I re-tested one just to be sure. Created a new process order for 30. Reveived 15. Got an 04 inspection lot created. Processed the lot, posted out the 15 to unrestricted and made the UD with an Accept code.
Then I GR another 10. These went straight to unrestricted as I expected. Then I posted the final 5 in a 3rd GR. Same result.. straight to unresticited.
I'm not sure why your not seeing the same. Again, seeing that 'date' in your number # choice is bothersome. If some modified that to include the date of receipt and included the time stamp in that, then your going to get new inspection lots.
Are you sure they didn't post it to a different batch on the second or third posting. And of course, this does refer to the same process order.. correct? You not using three different process orders for this are you?
Craig

Inspection lot creation for inspection type 05

Hi Gurus,
We have finished material FERT & semifinished material HALB.We have assigned insp. type 02 & 05 in material master of matl. HALB.When we create production order for FERT & confirm the order , inspection lot is generated for matl.HALB of inspection type 02.
Now we are reversing the goods issue by movement type mb1a, movement 262.In customizing for movement 262 inspection lot origin 05 is assigned.
My problem is that when i reverse the goods issue with mvmt.262, inspection lot is not created for insp. type 05. What should be the reason behind this? or are any changes to be done to above setting?
Regards
Ram

Hi Ram,
Just check the SPRO setting SPRO---> Quality Management ->Quality Inspection->inspection lot creation--->inspection for goods movement --->deactivate quality inspection for a movt type.
Here against movt type 262 uncheck the QM not active tick.
It will solve your problem.
Cheers,
Tushar

Inspection Lot creation for the 103 movement type

<<Don't ask for or offer points>>
Dear Experts,
we have the requirement of Creating the Inspection lot for the 103 movement type. we have done all the necessary settings for 103 movement type (in OMJJ and under the node Quality Management --> Quality Inspection -->Inspection Lot Creation -->Inspection for Goods Movements) but still I am unable to achieve the results. Same is happening for 105 movements.
Kindly let us know what settings need to be done in order to achieve the same.
Full points will be awarded for the reply
Regards.
Edited by: Matt on Sep 18, 2011 4:44 PM

Hi,
If you have activated two inspection types (eg 01, 0101) of same inspection lot origin (01), in material master you should have a preferred indicator set for the inspection type for which you want to be selected when you perform goods receipt.
This check box is available in the inspection type set up in the Material master.
Also check whether the post to inspection stock indicator is set for the material (in the inspection type), then only material will be posted to inspection stock.
Please confirm, what happens to the stock after making MIGO. check in MMBE and confirm
Go through the link and maintain the necessary settings. I think default settings for 01 type should work.
http://help.sap.com/saphelp_470/helpdata/en/2d/350e4d448c11d189420000e829fbbd/content.htm
Regards
Hari

No inspection lot can be opened for this material error is coming during GR

dear friends,
no inspection lot can be opened for this material error is coming during GR. what is the cause for this and how to solve it. please suggest me
regards,
Krishna

Hi,
i think you have maintained the quality view and activated the inspection. but you have not created any inspection lot task list for the material and plant. thsi you can create through QP01 there maintain the material and plant. then enter in inspection plan give usage 5 and status 4. save it and try to check it with QA32 and see the lot. it should be released then only you can give usage decision.
regards,
Adwait Bachuwar

Stock Transfer to quality without Inspection lot creation

Hi,
I want to do stock transfer from unrestricted stock of Plant A to quality stock of Plant B. However I don't want inspection lot to be created.
Is this possible?
I am using Movement type 301 and Inspection Lot of type 08 is active in Material Master.
If I deactivate QM for movement type, can I post to quality without inspection lot creation.
Thanks

Do you have any inspection type setup for material in plant B? If yes then you would be not able to transfer stock in QI without creating an inspection lot. If inspection type is active in material master of plant B(destination) then system would through you error message saying - "transfer stock in QM only". The reason is you would not have an option to move stock from QI using 321 (QI to UNR) in plant B if QM is active. 321 managed by an insp lot.
If inspection type is not setup in material master at plant B then you would be able to post stock in QI without creating an inspection lot. Then move stock from QI to UNR using 321 (MB1B).
Hope this clarify you.

Inspection lot with 01 origin for stock transfer (Intra company STO)?

Hi Sap Gurus,
As per standard SAP configuration for 101 movement type, 08 is the inspection type used for stock transfers (Intra company STO). But, there is a requirement from business to use 01 for Intra STO. Is it possible to get an inspection lot with 01 origin while GR to the delivery created for Intra STO ( Stock transfer B/n plants from same company code)?.
Thanks in advance
Venkat V

Hi All,
Thanks for your replies..
Its STO Purchase order between two plants under same company code. System triggers movement type 101 with movement indicator B - Goods movement for Purchase order and Receipt indicator X - Stock transport order. Here system expects inspection lot origin 08 as per standard SAP configuration(OMJJ).
I just wanted to check, is it possible to get inspection lot from 01 origin for this type of stock transfers. If anyone who worked on this area, please share your inputs.
Thanks in advance
Venkat V

Table for Delivery number & Quality inspection lot number.

Hi Gurus,
In which table, Delivery Number & Quality inspection lot number are related?
Reg.
Amol

Hi,
In LIPS
If required modify layout and select Inspection lot option
Kapil

Control of Inspection Lot Creation (Lot Summary) in Material Master

Dear Experts,
I would like to set the "Control of Inspection Lot Creation" to '1' An inspection lot for each material document and material"
But according to Help (F1), the lot summary is not supported ship the stock to unrestricted-use for skip lot.
<If you have made settings for the lot summary, no ship to stock takes place for skip lot. That is to say, the stock type is not immediately changed from "in quality check" to "unrestricted-use".>
Any idea to solve this problem?
Thank you very much.
Regards,
Wong

Dear Wong
If both a skip lot and an automatic usage decision occur, the system performs a ship to stock without posting the material into the quality inspection stock. The ship to stock does not take place during inspection lot summary.
It seems the '1' An inspection lot for each material document and material" is creating an inspection lot summary by which it is preventing the ship stock movements. I have tested with this and found that this works only for each material document only
The solution could be run a program in the backgroud setting the automatic UD so that the skip lots are cleared at the earliest. you can do this with the help of QA17, QA16
Regards
Gajesh

Inspection lot creation while partial comformation in 03 inspection type

Hi
I want inspection to be created while partial confirmation of operation in CO11N in 03 inspection.
It is happening with release of production order.
PLz let me know -if anybody can help.
Regards
Pooja

Hi Ram,
Just check the SPRO setting SPRO---> Quality Management ->Quality Inspection->inspection lot creation--->inspection for goods movement --->deactivate quality inspection for a movt type.
Here against movt type 262 uncheck the QM not active tick.
It will solve your problem.
Cheers,
Tushar

Quality inspection lot creation during GR for STO

Similar Messages

Maybe you are looking for