Quality INspection of Storage Tank Material

Dear experts,
I have the following scenario in QM.
We are a chemical industry. we have different storage tanks((TK101A)) for like caustic soda. we are making in process inspection and inspection at the time of GR and it creates inspection lot of 04. Now we want, suppose storage tank has quantity 100 ton before GR from production, when we do GR of 30 ton it will add in previous 100 ton and it will make 130 ton available in storage tank, at this time inspection lot of 04 will be of 30 ton as GR is of 30. but my client want to make inspection of 100+30=130 ton.
what can be the solution?
thanks and regards

Dear Sohail
Couldnt find any standard solution. but just giving a work around
Activate inspection point in the inspection plan header. you may use 130 as inspection point.
In config maintain the following setting -
SPRO > QM> Quality Planning> Inspection Planning>General> Define Identifier for Inspection Points> 130> in fields maintain instead of container as storage tank (Number length 10) and in Number length 3 maintain quantity.
So when you do the result recording for 50L in inspection lot you can put details like which is the storage tank and what is the quantity input ( eg 100L+50L=150L)
You can get this detail and prepare a report also
Hope this helps
Regards
gajesh

Similar Messages

Vendor wise Quality inspection parameter for same material

Hi,
I am working in Quality Management for Material procurement quality check according to vendor, The Quality Inspection parameter same material procure deferent vendors have different parameter.
Please help me for SAP configuration for above scenario.
Thanks
Rajesh Tiwari

No Answer received yet

Storage Tanks Inspection

Dear All,
I want to make the quality inspection of storage tanks. following is the scenerio.
we are a chemical industry, there are different storage tanks like TK-1A,TK-203A. We test one parameter once a day to check the quantity in storage tank or you can say storage tank inspection once a day, this parameter (Concentration) result is used by MM to get the storage tank quantity through some kind of formula.
How this inspection can be made.
thanks in advance.

HI Sohil,
You can create the Two tank and Two No Valuated material. Make General Data and Inspection only. Activate Recurring Inspection and scedule one Inspection a day.
Create One MIC Quantity for the material Inspection plan, and do inspection against it.
Regards,
Neeraj Bhadauria

QM- Material in quality inspection

Hi Gurús,
Hi Gurús,
We have some materials in quality inspection. For each material exist an inspection lot but not an inspection plan.
I would like to know if there is a way to move the material from quality inspection to unrestricted use, but without creating an inspection plan and recording a use decision
Regards
Enzo

Hi,
There are 2 possibilities -
1) If you have activated QM at material master & due to this the material is placed in the inspection lot, then you can transfer the same in QM only.
2) If you have not activated QM for material, but selected Inspection Lot stock at PO, then you can transfer the material in MB1B by movement 321
Regards,
Prashant

Unrestrected use stock to quality inspection stock

Hi,
plz tell me how can transfer Unrestrected use stock to quality inspection stock for same material and same palnt

Hi Prasad, Make sure that inspection type 08 is assigned and activated in Material Master's QM view. Then you would be able to move the stock from unrestricted to quality using MB1B (Mvt/Type 322).
Also check : Stock Reversal - From Unrestricted to Quality
Edited by: m_n_novice on Sep 5, 2009 2:02 PM

No Quality Inspection for Stock Transfer

Hi,
There is a scenario now in which a material is activated for quality inspection. This same material is also used for Stock transfer from other plant with same company.
So if material if received using STO, how can I deactivate Quality Inspection and just transfer to unrestricted use.
Thank You,
Raymond

Hi
check user exit.
QAAT0001 Inspection type determination different from variant 01
You can install enhancement QAAT0001 ,the function modules contained in this enhancement are called up in the
programs in which you can access the master inspection type if necessary.
The inspection lot is then created with the inspection type that was
determined using the enhancement.
logic will be for STO it will consider Z mvt type of origin 08 ,for STO material activate a Z mvt type & do not tick on Post to inspection.
For normal stock trnsfer system will create 08.
I hope this will add some value
Regards'
Sujit

Specifying storage bin for quality inspection.

Hello all,
I am wanting to move a material, that is stored in multiple storage bins in our warehouse, into an inspection lot.
I can create a 322 movement in MIGO however this doesn't specify storage bin location, it looks at the warehouse as a whole.
So can you please help me to specify the storage bin that I am wanting to create a manual inspection lot on.
Regards,
Chris

you cannot do quality inspections of bins, you can only do quality inspection of material stock .
the quality inspection in QM module is carried out at inventory managment level.
an inspection lot is created with QA01.
This moves the stock into quality inspection.
Along with the MM posting, a WM posting change notice (PCN) is created to move quantity from unrestricted use to Q-status in WM too. you then process this PCN with LU04 transaction. Here you allocate the quants that are effected.
when the inspection is done, then a usage decision is made with QA11 transaction, which creates again a PCN in WM.

Invoice payment blocked for material is under quality inspection

hi,
how to prevent invoice being processed (MIRO) when the materials are booked in quality inspection stock, Is this possible without the help of QM.
thanks

Hi,
Go to material master , check the QM View active.
If QM View is active , go to this view and change the QM control Key as 000 and remove the tick mark for QM Proc active Field.
Regards,
Andra

Vendor return material to quality inspection.

Hi,
I have send Raw materials to vendor for processing. Here we received the final product from vendor
and some Raw materials are left with the vendor.
I want to take back the balance Raw materials from vendor and the balance material, when I take back,
it should go to quality inspection.
What movement i have to use .
Rgs
Vijay.

Hi
Inform your QM Consultant to add 542 movement in quality inspection parameter.... he will be able to do it the similar way how he would have done for movt type 101....he just needs to add 542 in the list...
Award if u find it useful
Regds
santosh

Material not getting reversed after quality inspection

Hi Friends,
I want to reverse a material document for material which has been cleared in the quality inspection step. But I am unable to do so. Can you please let me know if there is any way we can reverse material which has been cleared from quality inspection.
Regards,
Wasim.

Hi,
Please apply the note 175842 by this you can reverse the Quality inspection & cancell the Material Doc.
Regards,
Manish Jain

Material is not going to quality inspection by default in PO

Hi Experts,
I have ticked post to inspection in material master QM view, dont want to genarate any lot .as per standard this should get copied in PO and while GR material should go to QI stock.But when we create PO it is showing unrestricted stock and while GR it goes to unrestricted.
Manually i am able to change from unrestricted to QI while saving PO.But client want it should happen by default QI stock.
Thanks.

Hi Sankur,
I just went through your remarks. What I have understood is, you want stock to get posted to quality inspection without inspection lot generation.
The setting which you have mentioned is correct. Probably the reason why the setting is not getting copied into PO for stock type, is the change of settings after PO creation. I explain you what I tested. Letu2019s have a look on following sequence.
1.     In material master Post to Inspection Stock tick is NOT activated.
2.     No inspection type is activated
3.     PO is created
4.     PO is released
5.     "Post to Inspection Stock" is NOW TICKED. (After PO creation but before GR)
6.     Goods receipt through MIGO
If you change material master, it would take effect from next purchase order.
Regards,
Anand Rao
Edited by: Anand Rao on Apr 29, 2011 3:05 PM

How to consider sample qty of raw material's quality inspection during mrp.

hi expert.
i have to consider sample qty of raw material's quality inspection during mrp.
i am wondering how to implement it.
is this possible?
thank you~~!!

Hi Seung Hyun,
I think it depends on the sample quantity, whether it is a fixed quantity or it depends to the raw material quantity or requirement from the orders. If it is not fixed, then you can use scrap percentage as suggested by Vivek.
If it is fixed quantity, then there are several alternatives to follow:
Include the sample quantity to your safety stock
Create another material number to distinguish the sample from the original raw material number and include it in the BOM
Regards,
Julian

More Quantity of Raw Material noticed in Quality Inspection

Dear Experts,
We have done GR against the PO for a material. But in Quality Inspection, we have noticed that there is excess quantity of stock received which is more than the inspection lot quantity.
My issue is that inspection lot quantity will be created for the same quantity for which GR has been done.
I can not post more quantity than the inspection lot quantity. So how to post the excess quantity into stock?
Please suggest.
Regards,
Phani

Dear Sujit,
Thanks For the quick reply.
While performing the same, as suggested by you, I am getting the error
PU Ordered quantity exceeded by 300 M : MPXSXWRT 1100 1104 1000009071
Message no. M7022
Diagnosis
The specified stock level or quantity is exceeded by 300 M.
System Response
If the message is an error message (E), the above is not allowed.
If the message is a warning message (W), the system will allow your input, but the warning is intended to prevent you entering a wrong quantity
But, I have already maintained in OMCQ transaction for Message 022, Application area M7 as u201CWu201D.
But still the system is giving an error message.
Hi Kent9999,
I didnu2019t understand how QP02 will help me.
Regards,
Phani

Delivery is accepting material in Blocked & quality inspection stock

Hi Experts,
During delivery ( VL01N) the system asks for Serial Nos for the delivered Material and serial Nos are assigned by going to Extras--> serial Nos. and PGI is completed
In this process the system could able to take the serial Nos that are in Blocked (07)or Quality (02) state also apart from the Unrestricted Use.
How can we restrict the system to prevent selecting the stock/material apart apart from 01 state ( i.e unrestricted use)
Regds
Rajiv

You have customize that availability check which runs behind delivery to check what are the stock available.
You have to make sure u unchecked the quality inspection stock and blocked stock
thanks

Movement of Material in Quality Inspection

Does anyone know a way to move material from one plant code to another and still keep the material in Quality Inspection, blocked or restriced. We are now having to move the material to Unrestricted in order to move it and the mateial has actually gotten to our customers as a result. We want to keep the material in a status that would not allow orders to cut against it but we can move it to other plant codes.

thanks to everyone for your responses. However, the MB1B will not work in this case. The seniro is this. I have material at an off-site warehouse with plant code ABCD (warehouse managed). The material is in QI there. I need some of the material at the manufacturing site plant code XYZ1. I want to enter a UB transfer order (STO) and not take the material out of QI at ABCD so that the remaining material left in ABCD will remain in QI. The problem is if we have material that is off grade at ABCD and we want one unit sent to XYZ1 for testing we have to take the whole off graded lot out of QI in order to move the one unit. Since the off grade was put in unrestricted it has on occasion gotten out to a customer.
Edited by: Renee Flatt on Feb 7, 2008 11:00 PM

Quality INspection of Storage Tank Material

Similar Messages

Maybe you are looking for