Quality inspection stock for scrapping

Hello SAP expert,
In MMBE there are 2800 PC in the Quality inspection SLoc 1005.We want to scrap those 2800 PC. We want to do this with MB1A, movement type 551 or 554. With movement type 551, the quantity must be transferred to unrestricted. For movement type 554, we can scrap directly from SLoc 1005.
When trying to do this, the error "Change the inspection lot stock of material 10009021in QM only" is shown. The person of the Quality department checked the inspection lots and canu2019t find something. So we donu2019t know where to look for this anymore.
Can you please help?
Thanks
Ryan

Hello,
I have noticed that they use MB1A, and with movement 551 (withdrawal for scrapping) and they said the stock will be transfer to UNRESTRICTED, then they do 554 movement (withdrawal for scrapping from quality inspection - reversal) which i think is a wrong process?
they can use movement 553 (withdrawal for scrapping from quality inspection) am i correct? to achieve they desired. and plus where can i find when i achieve to scrap the QI stock? where i can may the proof that the QI stock was scrap? in what tcode can i find this scrap number of material i done?
Thanks
Ryan

Similar Messages

Quality inspection stock for a vendor

Hi,
When receiving material against PO for a vendor, stock should get posted always in quality inspection for this vendor. This requirement is only for particular vendor, not for all. If in material master, QM procurement key is active, then it will be for all vendor, which is not required.
Please suggest.
Regards
parag

please check the vendor purchase view, there would have been a check mark.or may be the check mark in the info record.

Quality inspected stock for the sales return material

Hi,
For the very first time I'm working on Reworking order type. There was a material from customer return. My client want to reprocess it. So for the testing purpose in quality, I activated inspection type 06 (Inspection for returns from customer) for the material and transferred it to QI. Then I created a manual inspection lot and made defects recording and usage decision as Rejected. Now my question is where will the stock go after usage decision?
Hoping for quick replies.
Thanks & Regards,
Praveen

hi,
655 is for returns direct to QI stck. lot may be either 05 or 06 type.
if u want than as i already suggest you assign 05 type against return order type in Configuration (SPRO).
Quality management-> Quality Inspection -> Quality Inspection -> Inspection lot Creation> Inspection at shipping-->Define inspection lot origin to delivery type.
Regards
Edited by: D GURU on Jan 3, 2012 8:08 AM

Unrestrected use stock to quality inspection stock

Hi,
plz tell me how can transfer Unrestrected use stock to quality inspection stock for same material and same palnt

Hi Prasad, Make sure that inspection type 08 is assigned and activated in Material Master's QM view. Then you would be able to move the stock from unrestricted to quality using MB1B (Mvt/Type 322).
Also check : Stock Reversal - From Unrestricted to Quality
Edited by: m_n_novice on Sep 5, 2009 2:02 PM

How to use quality inspection stock

Hi,
Plz tell me How to use quality inspection stock.can i use quality inspection stock for any transaction directly.
Now i have 100 quality inspection stock is there.but i am not taking these stock to unrestricted use stock.i want use these stock to all transaction like 301,303,309.......
it is possible or not

hi
Use t-code MB1B to transfer stock from quality inspection - unrestricted-use stock
Movement Type 321 Transfer posting stock in quality inspection - unrestricted-use stock
The quantity is transferred from stock in quality inspection into unrestricted-use stock. Here you can post the quantity to another storage location.
You cannot use this movement type for QM-managed materials since transfer posting for these materials takes place via the usage decision.
Possible special stock indicators: E, K, O, Q
u2022 K Goods receipt for purchase order to consignment stock
u2022 O Goods receipt for purchase order to stock of material provided to vendor
u2022 E GR for purchase order or order to sales order stock
u2022 Q GR for purchase order or order to project stock.
regards
Vishal

Storage location extension for Blocked and Quality inspection stocks

Hi All,
Could any one explain how to extend a Storage location (which is actually maintained for the Returns) to make use for the Blocked and Quality inspection stocks. Does this require any config settings.
Thanks in advance.
Kalyan

Hi,
Thanks for the Reply.
Let me be more clear,in describing my requirement. Actually the present Storage location is maintained for only Returns. But in addition to this I require to make use of this storage location for the purpose of the maintianing Blocked Stock or QI stock.
Therfore to achieve above what are necessary steps or do i need to maintain any config settings for this.
Thank You,
Kalyan.

Automatic batch determination for quality inspection stock

Hello, gurus.
Could you please, help me with the following problem: I have received on the certain storage location some quantity of material maintained in batches into quality inspection stock with 501 movement type. Now I would like to make reverse posting, but I do not want to use cancellation of the document, I need to use 502 movement type and determine batch from quality inspection stock with automatic batch determination in MIGO transaction. I assigned Batch search procedure to 502 movement type and created all necessary condition records. I use Checking Group for Availability Check CH and Checking Rule for Availability Check 03 where I include quality inspection stock. However no batch can be determined. But if I use 331 movement type, everything is OK, the batch is determined without any problems. If I manually put batch and valuation type for the material, the system shows no error.
Why it is not possible to do automatic batch determination for quality inspection stock then?

OK, let us talk abou it. I check it in my system, actually 502 can work, but I can't trigger BM determination by 501. Maybe BM determination onlys to select some existing batches for consumption. For 501 in my pratice I can select all the existing batches to be added or just add a new batch.

Purchase order GR need to post to Quality inspection stock

Hi all,
How to post stock to Quality inspection directly for a PO. Even though in GR i make sure that its posting in Quality inspection, by default it is going to Urestricted stock. How to fix this by posting stock to Quality inspection directly?
Thanks,
Avani.

Hi Avani,
Pre-requesite:-
QM should be live at plant level.
Data toeb maintained in QM view.
You need to activate inspection type 01 (For GR against Purchase Order) and 04 (For GR from Production, against Process Order) in QM view of Material Master. Doing this all the GR quantity will be posted in Quality stock automatically.
If QM is not live, you need to activate the "Post to insp. Stock" inidicator in Materail master QM view.
Update us to help you more, reward points to help you better!!!
Regards,
Shyamal

Quality inspection stock

Hi experts ,
Whenever a material is procured from a particular vendor then at the time of posting goods receipt that material by default to be posted in Quality inspection stock alone not in Unrestricted use stock,i.e. posting in unrestricted use stock should not be allowed at all . If the vendor going to differ means then it can be posted in Unrestricted us stock .
Kindly help me how to do this.
- Neo

Hello Neo,
There are two options in this case,
1. If using QM module, then as suggested by Srinivas, you need to maintain QM info record for the vendor which are subject to Quality material.
2. If you are no using QM module then you need to flag mark "Post to Inspection Stock" check box in purchasing view of material master. But in this case, the material will be posted as QI stock for all the vendor, however you can change it during PO and GR.
Hope this helps.
Regards
Arif Mansuri

SD delivery goods issue of Quality inspection stock

Hello, anyone know whether SAP allow goods issue of quality inspection stock?
If stanrdard customizing not possible, any user exit ?

Hi
No sap not allows GI for QI stock
Beacuse Once Stock in QI without inspection we can't issue goods
Hope ths helps
Please reward points
Sunil

Delivery is accepting material in Blocked & quality inspection stock

Hi Experts,
During delivery ( VL01N) the system asks for Serial Nos for the delivered Material and serial Nos are assigned by going to Extras--> serial Nos. and PGI is completed
In this process the system could able to take the serial Nos that are in Blocked (07)or Quality (02) state also apart from the Unrestricted Use.
How can we restrict the system to prevent selecting the stock/material apart apart from 01 state ( i.e unrestricted use)
Regds
Rajiv

You have customize that availability check which runs behind delivery to check what are the stock available.
You have to make sure u unchecked the quality inspection stock and blocked stock
thanks

Change stock from unresticted stock to quality inspection stock

Hi,
I have a material with Qualtiy View.we have done G.R. & also made UD & now my material lying in unresticted Stock.but now i want to cancle the G.R..
What is the procedure to change stock from unresticted stock to quality inspection stock through quality module.
Regards
Pavan

Hi
user Exit QEVA0008 in SMOD you can check the documentation.
Module for Editing Customer Function Code
This user exit allows you to activate a function key in the menu for the
usage decision.
You can freely define the description and function associated with this
function key (+FC1).
You can use this feature, for example, to revoke (reset) the usage
decision.
Refer to the documentation for function module EXIT_SAPMQEVA_008.
Functionality
This function module is called if the freely defined function (+FC1) in the menu for the usage decision transactions is called up. A prerequisite for this is the activation of the user exit QEVA0008.
Example
Using this function module, you can reset the usage decision in transactions QA12 ("Change usage decision with history") and QA14 ("Change usage decision without history").
Include LXQEVF10 contains sample coding for resetting the usage decision.
Notes
Business transaction QM68 is available for this function in the standard system. You can display a where-used list for this transaction in transaction BS33 (Display transactions).
If business transaction QM68 was carried out successfully, the system sets the inspection lot status "UDRE" - usage decision reset (system status I0297). You can display a where-used list for this status in transaction BS23 (Display system statuses).
If you want to use the function to reset the usage decision, be sure to consider the following points:
If a vendor is released (status profile in the quality info record), an update is carried out only once; this means that if the usage decision is reset, the status in the supply relationship is not corrected.
If you make the usage decision again, the inspection results will also be transferred to the batch classification.
The quality level is updated only once (when you make the initial usage decision). If the usage decision is changed, the quality level is not updated.
Regards
Sujit

Sto stock to Quality Inspection stock

Hi,
I want Sto stock to Quality Inspection stock.Then i want Quality Inspection stock to production purpes
I want return stock to Quality Inspection stock.then Quality Inspection stock to normal stock

HI,
For the material to go into quality stk,in the puchasing view of material master for the receiving plant tick the post to inspection stk & save.
Then do the STO the material will come automatically into quality stk.
Even if u dont tick in material master still u can receive the matl in QI stk when doing migo by selcting the QI stk.
After receiving the matl u can move it by using tcode MB1B & mvmt type321 to Unrestricted use.
IN SAP only the unrestricted can be issued to production.
Edited by: Murugan mgl on Aug 13, 2009 8:15 AM
Edited by: Murugan mgl on Aug 13, 2009 8:16 AM

Quality inspection stock payment block

Hi All,
I want to block the payment for the materials which comes to quality inspection stock in MIGO as I have maintained in Material Master purchasing view post to quality inspection tick.
I want payment to the vendor only after the stock goes from quality to unrestricted use .Is there any way achieving it ?
Regards
Abhijit Das

Dear,
Please try this in transaction OQB1 and Change the QM control key used in the QM view for the material.
Or use SPRO > Quality Management > QM in Logistics > QM in procurement > Define Control key path.
In the details of the key, set the Invoice Block indicator as well as whether it should be a warning message or an error message.
Regards,
Syed Hussain.

OMJJ - Where I diferentiate "Stock quality inspection" - "Stock unrestricted use"?

Good morning, experts!
I need to know how to set up a move for the input material in quality stock, without having to use the QM or configure the material. We have the standard movement 503 that is received at the stock in quality inspection and the movement 501 that the entry into stock unrestricted use. In what field of transaction OMJJ I make this differentiation?
I appreciate your help.

Hi,
If one you use 501 the stock is sent to Quality inspection, then this could happen because you have checked the Post to Insp. stock indicator in the material master (Purchasinf view).
Post to Inspection Stock
Specifies whether the material is subject to quality inspection (without inspection lot processing) and whether a goods receipt is posted to inspection stock. The indicator is copied to purchase order items and goods receipt items as a default value.
Dependencies
You can select this indicator, if no stock-relevant inspection type has been selected in the inspection setup, and therefore no stock-relevant inspection lots can be created.
If you activate a stock-relevant inspection type, the entry in this field is deselected and can no longer be maintained. In this case, a corresponding indicator in the inspection type controls whether goods are posted to inspection stock.
When you use 501 the stock should be posted as unrestricted stock, then you can move the stock from Unrestrected to Quality Inspection stock using movement type 322 (use t-code MB1B).
With movement type 321 you can move from Quality Inspection stock to Unrestricted.
Kind Regards,
Mariano

Quality inspection stock for scrapping

Similar Messages

Maybe you are looking for