Quality inspection stock showing in urestricted stock without usage decision

Dear Gurus,
We have came across a serious issue in Quality department as follows.
The skip stock status "REL  SKIP SPRQ CROK QLCH" is showing in unrestricted use stock even before the usage decision is made. Now when we are trying to reject the skip material, in MMBE there is no stock against Quality inspection. & the stock when rejected is getting deducted from unrestricted stock.
Request you please guide me so as to transfer the "REL  SKIP SPRQ CROK QLCH" stock yo quality ispection once 105 is done.
Kindly guide what configuration settings need to be changed.
Regards,
Mahesh

Thanks Saravan.
As I am new to QM kindly clarify following things to me.
1. Even if we reject the skip stock by making the usage decision, it won't be deducted from unrestricted.
2. Skip/DOL lot will never be shown under Quality inspection in MMBE.
3. The only rejection of SKIP/DOL that will happen is the line rejection.
4. Once the line rejection happens materila status will be removed as DOL & converted to normal for next 5 lots.
Correct me if I am wrong.
Thanks & Regards,
Mahesh

Similar Messages

  • Material rejected through quality inspection lot goes to blocked stock

    Dear All,
    All materials that are rejected through quality inspection lot should go to blocked stock. My client want to generate a report for viewing what all materials are rejected. How can do that?
    scenario2: If the materials are rejected then can they be automatically  be sent back to the vendor (return to vendor). if possible
    pl send me some suggestions...!!!
    pl discuss

    Hi,
    See  mvt of material directly to blocked stock u can do by setting the Selected Set of ur specific UD code. in QS51/QS52. there is one column near to code, set R=rejected and set that field "BloCked Stock" . Define there and execute ur transcation, whenever u provide an UD system automatically post the stock in blocked location.
    MCVX is the report where u can get the stock lying in blocked location, or for temp. purpose use QVI and developed the new report.
    regards

  • QM: Material Transfer without Usage Decision

    Dear all,
    I need your help in mapping following scenario.Senario is like:
    Material is received from supplier with quality certificates. Material receipt is made on the basis of supplier certificate. Sample from received stock is send to third party lab for testing. Meantime material received is used for production. After some days result from third party lab is received. If report is negative then compensation is to be claimed for used quantity and rest of the material is to be returned to supplier or can be used if supplier agrees to compensate for poor quality.
    Should I use long term characteristic for this and if yes then how it is to be used.
    Early response is solicited.
    Thanks,

    Hi (Better if you mention your name),
    In your scenario, you can use the long term characteristics for recording results even after usage decision and can take the usage decision, but ensure that you`ll not do any stock posting until you get the report from Third party Lab. After you receive the test results from it, then you do the stock posting for the unrestricted use (for used materials) and return delivery (for rejected materials).
    Reward if cleared n close the thread.

  • Cinfirmation of 03 lots without usage decision

    Hi
    I am from pharma company , and for in-process inspection lots starts with 03 inspection type we want to confirm the results though valuation and don't want to assign usage decision.
    can i set automatic UD for 03 inspection type ?
    is it possible to to give confirmation for further processing through valuaion for characteristics even if it fails?
    in-process (03 -inspectin lot) results are confirm through valuation than is it required to do usage decision ?
    can anybody reply on this,
    Edited by: AYK on Nov 26, 2008 6:05 PM

    can any body answer

  • Transaction code to know stock lying in quality inspection(for UD)

    Hi,
    Pl let me know transaction code to know stock agaisnt materials lying under quality inspection ( for UD ) for more than one materials or plant wise or pgrp wise or sloc wise ....
    Thanks
    Arul Murugan

    Hi,
    In QA33 Transcation code ,Enter the lot creation ,In list settings select ,Only lots without usage decision and execute.
    In the layout select Quantity to be posted(Quality stock).This will give the list of Inspection lots against the material to be posted to Unrestricted or blocked stock.
    Manoj.N

  • How to Clear Stock From Quality Inspection

    Dear Sir,
    We have following problem scenario :
    In the Quality View the wrong type of Inspection Type was given and subsequently during MIGO as  the "Quality Inspection" option was selected under Stock Type , so after MIGO stock got posted under Quality Inspection  and no Inspection Lot was created .
    Now we want to clear the Stock from QI to either Un-restricted or any other type , so that material can be cleared and brought to Un-restricted Stock  ultimately .
    We tried to use MB1b with movement type 321 , but it given error as "Change the inspection stock of material CJMC1A0477 in QM only" .
    I request you to kindly guide me as how can the Stock be cleared from QI .
    With Thanks and Regards
    B Mittal

    Hi ALL,
    I'm also facing the same issue. In material master QM view : Q M Procurement activity deactivated and Inspection setup also deactivated.  This is not a proper way to solve the issue anyway i have deactivated, but still i am facing same issue.
    Please anybody can help on this...
    Regards
    Chandru.

  • Quality inspected stock for the sales return material

    Hi,
    For the very first time I'm working on Reworking order type. There was a material from customer return. My client want to reprocess it. So for the testing purpose in quality,  I activated inspection type 06 (Inspection for returns from customer) for the material and transferred it to QI. Then I created a manual inspection lot and made defects recording and usage decision as Rejected. Now my question is where will the stock go after usage decision?
    Hoping for quick replies.
    Thanks & Regards,
    Praveen

    hi,
    655 is for returns direct to QI stck. lot may be either 05 or 06 type.
    if u want than as i already suggest you assign 05 type against return order type in Configuration (SPRO).
    Quality management-> Quality Inspection -> Quality Inspection -> Inspection lot Creation> Inspection at shipping-->Define inspection lot origin to delivery type.
    Regards
    Edited by: D GURU on Jan 3, 2012 8:08 AM

  • AFS-QM Error in stock posting performed by taking Usage decision

    Hi all,
    during stock posting with 105 mov type performed by taking Usage Decision (QA11), I faced with a strange system behavior, described beneath.
    Previuos steps:
    Purchase order creation
    Partial Good receipt performed by MIGO, mov type 103 (Blocked stock from PO)
    Automatic Creation of Inspection Lot
    Error encountered:
    If I take usage decision (QA11) for the inspection lot created, putting the stock checked in Unrestricted Use (correspondant mov type = 105), in the following good receipt (related to the same purchase order), the incoming stock available is less of the real quantity, previously accepted..
    After some checks we understood that with 105 mov type the system doubles the real quantity previoulsy accepted, acting in the following manner:
    Initial PO: 100 PZ
    1° Good receipt: 30 PZ
    (automatic creation of inspection lot)
    If we take a usage decision, posting stock to unrestricted use (mov type 105), in the 2° Good receipt, the quantity available from the same PO is not 70 PZ (100 - 30), but only 40 PZ ! !  (100 - (30 * 2)) = 40
    Please note that it does not occur if we post stock (always 105 mov type) with a MIGO transaction, so we are forced to think that the problem is strictly related to AFS-QM inventory posting, and not to 105 mov type or inbounding process.
    Thanks for your collaboration,
    Regards,
    Ale

    I'm not familiar with the specific apparel and footwear solution but with regards to QM, if you are using the standard SAP delivered stock postings, it should use 105 to accept the material to unrestricted for the GR blocked. 
    I would first use MB51 for the material and batch and review all the material movement documents.  Look at the trail of movements and try to see where the changes happen.
    In your example, what did the unrestricted inventory and GR blocked inventory show as stock levels?
    I'd also check OSS for issues related to AFS/QM.  This is not new functionality in SAP so I would be surprised if this was an actual bug or problem in the system that hasn't been seen before.
    FF

  • Default value of quality inspection

    Hi all
    when you enter a goods receipt against a purchase order. and a Quality Inspection is suggested as the stock type. Where does this default value come from?
    Thanks

    on the PO delivery tab did you select "quality inspection"  in stock type? check it.
    Ratna

  • GR blocked to Quality inspection

    Dear Experts
    i have made goods reciept by 103 into GR blocked stock. now i want to make goods reciept to quality inspection . which movement type should i use.

    Did you maintain Quality Management view in Material Master??
    If QM View is maintained in Material master then Release GR Blocked Stock using 105 Mov type then Stock will go to Quality Inspection Automatically.
    Further You can do Usage Decission thru QA32....

  • Quality Inspection lots during returns

    Hi,
      We need to generate inspection lots when there is a inbound delivery done.The neccessary setting's has been done and insp lot is getting created.But when we do PGR within Inbound delivery we get a error as ''Status of inspection lot 600000000000 / partial lot 000000 does not allow good issue''.We need to do PGR and then process the lot.
    Appreciate your help in this regard.
    Thanks

    Hi Shanawaz,
    Please process the inspection lot and make Usage Decision, then you will be able to do PGR.
    Tcodes: QA32 - Inspection lot selection
    QE51N - Results Recording
    QA11 - Usage Decision
    Thanks and regards
    muruegsan

  • Show defualt (unrestricted) but i want in migo stock type (Quality inspecti

    Dear all,
    When i done migo 101 againt STO PO  in migo screen stock type show defualt (unrestricted) but i want in migo stock type (Quality inspection)
    plz describe

    Dear all thanks
    Let me confirm one thing
    My scanerio is STPO (stock transfer order) In this scanerion material will be available in both plant receving and supplying plant
    Is it require to activate QM inspetion type in both plant ?
    If yes so which inspection type  is required ?
    Edited by: Harish Parab on Jan 21, 2011 12:25 PM

  • Sample  still showing in quality inspection stock after usage decision completed

    After process order completed, we have received 100 units as a quality inspection stock.  After usage decision,( QA11), I have posted 98 units to unrestricted use and 2 units to the  to sample usage
    98 units successfully move to unrestricted stock.
    However 2 units for sample still showing quality inspection stock.
    I have checked MB51, mat document number for sample is 4900000160 and movement type is 331
    Do you have any idea why sample still showing in quality inspection stock. It  should consumed and zero out the quality inspection stock in MMBE

    Hi,
    Please check you MIC's control Indicators.
    Is it tick on Destructive insp. under Sample tab ?
    Please tick it and try again with whole process.
    Destructive Insp. : You specify whether the sample is to be destroyed after inspection. This means that is no longer available. This quantity is used in the usage decision as the proposed quantity for the posting to sample.

  • MBBE-"Quality. inspection" stock shows Inspection lot as "Unrestricted"

    Dear All,
    In MMBE, a material is available in "Quality Inspection" stock.
    We checked in "QA32". There we can see, it is in "Unrestricted use".
    How to move the stock from "Quality Inspection" to "Unrestricted use".
    Any suggestions.
    Regards,
    Mullairaja

    create a inspection lot manually for the qunatitiy that is still in Q-status and do a usage decision

  • Automatic batch determination for quality inspection stock

    Hello, gurus.
    Could you please, help me with the following problem: I have received on the certain storage location some quantity of material maintained in batches into quality inspection stock with 501 movement type. Now I would like to make reverse posting, but I do not want to use cancellation of the document, I need to use 502 movement type and determine batch from quality inspection stock with automatic batch determination in MIGO transaction. I assigned Batch search procedure to 502 movement type and created all necessary condition records. I use Checking Group for Availability Check ‘CH’ and Checking Rule for Availability Check ‘03’ where I include quality inspection stock. However no batch can be determined. But if I use 331 movement type, everything is OK, the batch is determined without any problems. If I manually put batch and valuation type for the material, the system shows no error.
    Why it is not possible to do automatic batch determination for quality inspection stock then?

    OK, let us talk abou it. I check it in my system, actually 502 can work, but I can't trigger BM determination by 501. Maybe BM determination onlys to select some existing batches for consumption. For 501 in my pratice I can select all the existing batches to be added or just add a new batch.

Maybe you are looking for