Quality issue with importing edited audio from Adobe Audition CS6 to Articulate 09

I have edited an audio file using Adobe Audition CS6 and the playback sounds fine. I then import the edited file into Articulate'09 and the audio sounds horrible, very tinny and not useable. Does anyone have any suggestions on how to fix this issue? I have tried saving the audio files as mp3 and wav to see if that would help and it did not make a difference.

SharonL65 wrote:
I have edited an audio file using Adobe Audition CS6 and the playback sounds fine. I then import the edited file into Articulate'09 and the audio sounds horrible, very tinny and not useable.
I checked - it certainly supports both formats, but you'd have to be a lot more specific about what's wrong, because 'sounds horrible' doesn't convey anything meaningful at all, I'm afraid. And we have no idea of the format you are using - it's very possible that if it's being resampled on the way in by the operating system. If that's the case you have to find out specifically what formats (in terms of bit depth and sample rate) that this software actually supports.
Bottom line is that I'm afraid that this isn't very likely to be an Audition problem at all - you may get a more detailed and meaningful response from Articulate themselves.

Similar Messages

Having issues with importing a FLV from Adobe Connect. Either the file is too large to import, the file corrupt or the sound will not play. In the Flash Pro 5.5 version it can only be viewed with sound but will not import so it cannot be converted, the ne

Anyone have a clue how I can open or convert the Adobe Connect FLV file?

I'm searching for an answer to almost the same exact problem, using almost the same exact hardware and software. Has an answer been found?
The files that I'm trying to burn come from eMusic, and they are formatted mp3. Recently, (after the iTunes update to 9.2.3?,) they would not drag and drop from iTunes into Toast. From several different discussions I've tried working around this by dragging to the desktop first then dragging and dropping to Toast, going to Toast from a programmer's homemade help window, " iToons," and today, after talking with Apple support, going directly to Toast from my eMusic folder. Alas, all recordings do not perform like they use to. Sometimes they play and sometimes not. There is one I managed, that is listenable, but sometimes I have to put it in my car stereo over and over again as it gets ejected with an error code, sometimes, finally it takes it... Some of the recordings on other disks I've burned are not clean - they have white-noise sounds creeping in... I use to have none of these problems. One time as I was listening to a CD that managed to play, and it just stopped playing... Is there an answer out there to get back to how it use to be? Thanks for you help.

Issue with importing effects settings from 3.0 to CS5.5

Several times I've attempted to import effects settings from 3.0 into 5.5 using the 5.5 Import>Application Settings function. Each time it says that it is unable to do it because of some unknown error. Is there another way to import the settings? I'm in the middle of an album project in 3.0.1 and would like to try 5.5 with some of these existing sessions. I've used the SuiteSpot studios Ses2Sesx program to translate the session. It imports fine, but none of the effects or racks import. I very much want to be able to do that.

Hi Michael,
These effects are mostly external VSTs, but a few of them are native
(Parametric EQ). The program will just not import the settings .xml
file or the vstmanager settings .xml. The VSTs seemed to have been
found easily by the program. I have not yet gone through them all to
see if they will pop up.
Another interesting thing - when I installed AACS5.5 I lost the ability
to open AA 3.0.1. I had to reinstall 3.0.1 in order to be able to use it.
I'm not liking this program at all. I don't like the interface, the
GUI, or the navigation through the program.

Issue with calling Web Services from Adobe Interactive Forms

Hi,
I have created Web Services for remote enabled function module and imported it in the data connection in adobe form. In the adobe form created the button (Drag&Drop from Data Connection) as HTTP submit button. In the submit URL I have given the Web Services link. A program is downloading the pdf form in desktop with fillable as 'N'.
When I provide the input parameters and click on the button, its promts for SAP user id and password. After that it shows the error as "An error occurred during the submit process. Cannot process content of type text/xml".
Why this error is coming and how to correct?
How can we debug web services?
Thanks and Regards,
Praveen

Sherif, this is a wrong forum. Please post on the LiveCycle Designer thread: http://forums.adobe.com/community/livecycle/livecycle_es/livecycle_designer_es

Issue with importing & editing mini DVDs

We used a Sony mini DVD camcorder 2000-2005. I have about 25 discs that I converted into AVI format which obviously iMovie does not support. I have used Toast Titanium as well as several other programs to convert files to m4v, mp4, mov, dv. Some don't show up in iMovie which I assume means they aren't supported. Other however will import into iMovie events but the video is all 1 clip and the option to split them is not available. Does anyone have suggestions on what format to convert AVI to so that I split the events in iMovie and then make projects out of each of them?
jason

I would suggest using a free app called MPEG Streamclip, from Squared 5.
With MPEG Streamclip, you can drag your long clip in. Then you can move the play head to where you want your shorter clip to start, and press I - for In Point. Then move the playhead to where you want your shorter clip to end and press O - for Out Point. Then FILE/EXPORT USING QUICKTIME and choose Apple Intermediate Codec for highest quality, or choose h.264 for smallest file. Give it a name, and then repeat until you have made all the short clips you need from the long clip. You can then import these into an iMovie Event using FILE/IMPORT MOVIE.

Adobe reader X Issue With no response yet from Adobe.

Since installing Adobe Reader X, I am unable to open pdf's attached to emails (in Outlook 2010). On double clicking the attachment, Adobe Reader opens and I get the following message "There was an error opening this document. Access denied."
If Adobe Reader is already running when I double click the attachment, it opens OK. If I save the attachment to my HDD, it also opens OK, when I double click it (whether or not Reader is running or not).
I would very much appreciate help with this problem.
My desktop is running Windows XP 32 bit with Outlook 2010 32bit. I'm a local admin on this pc.

Since installing Adobe Reader X, I am unable to open pdf's attached to emails (in Outlook 2010). On double clicking the attachment, Adobe Reader opens and I get the following message "There was an error opening this document. Access denied."
If Adobe Reader is already running when I double click the attachment, it opens OK. If I save the attachment to my HDD, it also opens OK, when I double click it (whether or not Reader is running or not).
I would very much appreciate help with this problem.
My desktop is running Windows XP 32 bit with Outlook 2010 32bit. I'm a local admin on this pc.

Sudden problems with importing/editing audio files

I podcast my lectures, which run about 1 hr 15 mins. My SOP was to drag and drop an mp3 or AAC version of the original audio capture into Garageband and then split the file into two separate podcast episodes. Since the big Apple Software upgrade, however, this procedure doesn't seem to work. The file imports and plays, but I can no longer split it into multiple regions (it also shows a flat line for the entire track). Any ideas?

I am having the same problem. Looking for a fix and will post as soon as possible. This all happened after the new software update.
M

Issue with import master data from BW info object using DM

Hi All,
We have master data loads on weekly basis.
One of them, product master data is loaded from 0material using DM package.
While loading the attributes we exclude couple of Products based on the attributes (say Product sub family)
ex - Having conversion file which excludes product sub family - ML. so all the products under that sub family are excluded from the load.
Hierarchy load - How can we skip the products which are excluded during attribute run?
For the first hierarchy load, we copied all the product ID which are part of product sub family - ML and entered in conversion file "NODENAME" and "PARENT" to skip.
But during the subsequent runs, whenever we have a new product under Family ML the hierarchy job fails. Attached the error. we then manually enter that product to be excluded in the hierarchy load and the job runs fine.
Is there a way to automate this process.
Version - BPC 10 SP 17 .NET 3.5
Appreciate any thoughts on this.
Thanks in advance/
Raghu

Thanks for your response.
We are currently using the first option you have mentioned. But the problem is when we have new product coming in BW (which is part of attribute we skip while loading attributes from BW to BPC) we manually need to add that product to skip in hierarchy conversion file also.
As i can see, the selection option to skip is available only while loading the attributes but not for hierarchy load.
Please correct me if am wrong.
Regards,
Raghu

Hi, I have problem with importing MOV files from SJCAM 4000. MOV files are in supported formats for Adobe Premiere Elements 11. But if I'm importing MOV file, only audio part is imported, video part is not imported. How can I solve this problem?

Hi, I have problem with importing MOV files from SJCAM 4000. MOV files are in supported formats for Adobe Premiere Elements 11. But if I'm importing MOV file, only audio part is imported, video part is not imported. How can I solve this problem?

haben
From looking at the specifications of your camera (SJCam 4000), we know already what video compression your camera is using. It is H.264.
A H.264.mov file should be supported by Premiere Elements 11. On what computer operating system is your Premiere Elements 11 running?
Do you have the latest version of QuickTime installed on your computer? And, are you running QuickTime and Premiere Elements 11 from a
User Account with administrative privileges? Please go to Premiere Elements 11 Publish+Share/Computer/QuickTime to confirm that you find
presets there for the QuickTime choice there.
What are the properties of these H.264.mov files - is it 1080p30 (1920 x 1080p30) or something else? Do you know if this camera is recording with a variable or
a constant frame rate?
Please review and consider and then we will decide what next.
Thank you.
ATR

Issues with importing from excel

I have been running into a several issues with importing from Excel.
First my configuration
I am running SQL Developer ver 1.5.5 Build MAIN-5969
I am on a Windows XP Professional Version 2002 with Service Pack 3
I am importing into an Oracle 10g database.
1. SQL Developer doesn't work on Excel 2007, I have to save all my files into Excel 97-2003 format before I can use them.
2. If I run into an error loading and stop the process, SQL Developer doesn't release the Excel file and I get a sharing violation if I try to save the spreadsheet without closing SQL Developer.
3. I have found that I have to set print area to the area I want to work with, otherwise the import wizard tries to keep adding rows.
4. When using the Import wizard, it keeps adding commas on fields with numerics unless I specify the column in excel as text. Currently the column is formatted as General in the spreadsheet or I can change the wizard format to say the column is an integer, but it actually is just a code field with numeric characters so it may have leading zeroes that I need to keep.
This might be related,
I have a column in excel defined as text but only contains numerics. It is of length 4, but the wizard sets a precision of 5 with a datatype of VARCHAR2. If I try to change it to 4, I get an error saying the field is not large enough. Yet, when I do a LEN on the column, it only gives me a 4. I have other fields in the same sheet that a 3 position numeric and 2 position numeric and those are fine. I am thinking this is related to the comma being inserted in a numeric field for anything greater than 3 positions.
5. Importing excel dates to oracle dates doesn't work. I have to convert the excel date column to text then import as a VARCHAR, then convert to Date once in the database.
6. The default of nullible is not set on any columns and I have to set them before the import. (I would prefer it set to nullible and I have to uncheck the box to make it not nullible. I would prefer to import all of the data and then deal with the nulls after they have been pulled in)
7. When I select header columns included it uses that as the column names. Is it possible to do the name length check then? It has bit me a few times where I try to import and forget to check the name length and then I get an error when I start running the import.
8. If one of the columns to import has all nulls, then the precision comes out to 0 and if it isn't changed an error occurs on import. Could this situation default to a precision of 1?
9. It would be nice if there was a completion message displayed and a cancel option while running.

On point 3.
I have a column in excel that consists of numbers. 4 digit numeric codes. Ex, 1111, 2345, etc
The column's format is general. It displays as just 4 numbers.
When I start the wizard initially, the column appears with data as 1,111, 2,345, etc, on the Data Preview screen.
It determines the precision to be 5 on the column definition screen.
If I change the precision to 4 then continue, that field will error out when I verify with "not big enough to hold the data in source columns"
If, I change the excel column to a TEXT column.
Excel still displays as 1111, 2345, etc
The wizard then displays the same data 1111, 2345 on the Data Previeiw screen
Yet, when I get to the column definition screen it still sizes it as a 5
If I change it to a 4, I get the same error when verifying.
If I leave them alone as 5, then it processes just fine.

Says invalid serial number-i got it via email from adobe. (CS6 design standard student edition).

says invalid serial number-i got it via email from adobe. (CS6 design standard student edition).

I think that you'll need to get in touch with support to sort this out.
But you could check your order to see if you ordered and upgrade or a new purchase. The serial numbers for upgrade are different, and require the earlier version on your computer ( or its serial number instead).
If you've oredered an upgrade, check that you're entering the correct serial number. You'll probably be prompted to enter both: once for qualifying product and once for the new upgrade.
Let us know if this was the issue. If not, I suggest that you get in touch with Adobe Support.

Need Help Import Project from Adobe Premiere CS6 TO FCPX

Does anyone have step by step instructions on how to export a project from Adobe Premiere CS6 to FCPX.
Many Thanks,
Mat

I am trying to transfer a movie project I made on my work computer (MacBook Pro, iMovie '08) to my home computer (iMovie HD, iBook). I've transferred the files using a Lacie, but when I open iMovie HD on my personal computer, it does not let me open the project I desire.
As you have already found, iMovie '08 projects, as such, are not backwards compatible with previous versions of iMovie. iMovie '08's project basically consists of a list of instructions detailing how a project is to be exported while previous versions of iMovie actually rendered physical file segments ordered properly in a physical timeline reference file.
I can import, but not the whole file, it keeps putting items in the trash. I have exported Mobile, Medium, and Large files.
Basically you have two options. You can either import your raw footage (the Event clips) and "re-create" a project in iMovie HD or export your iMovie '08 project, complete with edits to an HD compatible format (e.g., DV or AIC/AIFF) and import this file into iMovie HD. Unfortunately, this latter approach will not allow you to "manipulate" your previous edits.
Basically, I want to be able to open the file in iMovie, in case I wanted to duplicate it or edit it.
As indicated above, you can import iMovie '08 shared/exported files to iMovie HD but you then have to edit them as source files. To remove a previous edit, you would literally have to delete it from your new project in order to add another.
I also want to be able to continue burning copies of this movie slideshow to DVD (I created a DVD project using iDVD).
Previously authored and burned DVDs can be copy-burned by applications like Toast or used to create stored "image" files that can be used to burn new DVDs on an as needed basis in the Mac OS "Burn" folder or using the Disk Utility application. In fact the "image" file can also be created for this purpose from within iDVD.

Quality issues with IDVD solved

Hi All
RE. Best looking IDVD playback.
May this help all those stuggling with quality issues with perfect looking Qtime files encoded by IDVD coming out looking crap.
Simply this: instead of exporting your media from your FCP timeline in H.264 - instead select Motion JPEG A. This is found under your setting options in your Qtime movie/settings export window.
Your files will export much, much faster than Apple's default setting of H.264, you will also get very smooth playback wihtout any jaggies or nasty artifacts. Files are a larger but, hey, it just looks great.
Let me know if this works for you - it took me ages to figure this out!
Best regards
PostGuy40
Imac 2.16Ghz intel dual core Mac OS X (10.4.8) 17"

Good info. I'll keep this in mind next time.

Photo Quality Issues with Pixma MG6220

I am frustrated. The first photo printed from this printer was of poor quality. It was very 'grainy' and 'noisey'. I printed from the printer itself (put camera card into printer). I then printed from Picasa, same problem, very poor quality. It was then a couple of months before I attempted printing again. I printed from PS Elements 11. The quality was much improved but not what I expected from this printer. I finally called tech support, after tweaking every setting I could find. They essentially blamed my computer, wanted to reinstall the drivers and I need to buy new ink cartridges. It's NOT my computer. I'm curious as to why they think it's the drivers. It very well could be bad cartridges. The printer was purchased in December (six months ago). I'm wondering why the photo software would make a difference. I'm irritated that the people I spoke with seemed completely incurious as to what, exactlly, was wrong with the photos. It would appear that no on else has had this issue. The reviews for this printer were very good. I can't imagine reviewing these images and stating that they are "excellent" as I have read from many reviews. I'll be more than happy to attach scanned images for review (scanner works fine). Thank you.

Hi,
Check this for scanned images and originals for reference:
http://flickr.com/gp/skital/Y9615F
(you can download full-res versions there as well - it's a bit hidden if you don't know flickr)
This was using Canon Glossy II photo paper and NOT Canon Ink. I was trying different replacement inks over the time and I had similar results.
I'm a little bit hesitant with spending more money on this printer, esp. that I had never have this kind of quality issues with my previous Canon printer (MP600) when using non canon inks - I had color issues but never grainess.
Well, I may try original inks again, but it breaks a deal for this printer.

TS2681 quality issues with I pad 3, now on my 4th in 3 weeks

Quality issues with the new Ipad 3 , now on my 4th in 3 weeks , each time marks / scraches in the metal case are evident, not what i expect from apple , unable to e mail direct,

One of two things is happening.
1) You have had an unusual run of bad luck. So, return it and try again.
2) With all respect, you may be so picky, you'll never be satisfied.
Matt

Quality issue with importing edited audio from Adobe Audition CS6 to Articulate 09

Similar Messages

Maybe you are looking for