Quality issues on TV screen after export

Hi there,
Sorri if this is a noob question...
In premiere I have imported an .avi (lossless. via after effects) and then exported using Adobe media encoder.
When I have viewed this on tv its very 'bitmapped' and tends to flicker.
Not sure what settings to use... as this will be used on TV I need them to be as good as possible.
The footage is around 5 mins and needs to fit on a 1gig cf card.
please help, Im desperate.
edit_
Format: MPEG2
Range: Entire Sequence
Preset: custom
Video Codec: MainConcept MPEG VIdeo
Quality: 5
TV Standard: PAL
Frame: 720 x 576
fps: 25
Field order: lower
Pixel aspect: standard 4:3
profile: main
Level: main
Bitrate Encoding: CBR
Bitrate(mbps): 12
GOP Settings
MFrames: 3
Nframes: 12
closed gop: 0
autoGOP: unchecked
C att for settings in premiere.
Many thanks,
Kelvin

Unfortunately, your example is still queued.
edit_
Format: MPEG2
Range: Entire Sequence
Preset: custom
Now, my question: is this your Project Preset, or more likely your Export setting? It appears that you are using the AVI (uncompressed from AE) as your source material. Is this correct? What is the Field Dominance of your Imported AVI? What is the Field Dominance of your Exported MPEG-2?
Your issue sounds like a Field Dominance/Order problem. Per the other question, you are in PAL-land, right?
If needed, you can run all files through G-Spot to get info on their Field Dominance/Order. This would be the first thing that I would look into. If you have, and all is fine, then ignore my comments. We'll just wait until your example makes it out of queue.
Good luck,
Hunt

Similar Messages

SAP GUI 7.10 Blank Screen after Export

Hi,
We have an issue with our SAP GUI 7.10 patch level 12. User is trying to export a G/L Balance line item to spreadsheet in tcode FAGLB03. After data is downloaded, SAP GUI screens turns all white/blank. Sometimes the SAP GUI terminates automatically without any error message.
Please help!
Thanks,
AOT

Hello AOT,
just a comment here: Patch 12 is nearly 2 years old and up to the current Patch 20 of SAP GUI 7.10 tons of crashing SAP GUI issue have been fixed. On top of that one should be aware, that version 7.10 of SAP GUI for Windows goes out of maintenance in April 2011.
So wouldn't it be a good idea to check with latest version of SAP GUI for Windows 7.20?
Regards,
Martin

Graphics displaced after export

I have created a fireworks image that includes the swap image feature. This feature works both in the preview and after export. However, my images are "displaced" on the screen after export (they appear in different locations than they should be). Does anyone know what I could do to correct this?
Thanks!

I suspect it may be due to the way you sliced the document. Without seeing it, I couldn't say for sure. Can you upload the file?

Text poor quality after Export

I'm having some pretty poor quality text rendering after export. The video appears fine otherewise. I am exporting to YouTubeSD not HD, though I wouldn't think that would matter. [?]
I'm pretty new to the complexities of film editing. So, I can't answer much about the video source files other than that they are MP4 converted originally from analog files written to DVD. I wouldn't think that would have anything to do with the titles at all since all text created thru PP Title Editor. [?]
Here's a screenshot of settings. Any ideas?

Sorry- I meant to add this is CS5.5
Jeff- I've been using this same font for other projects without problem. This just started happening on this project. Yes, it is a serif font but no problems before. It's always rendered well [Adobe Arabic].
Message was edited by: zech3 APOLOGIES- when I searched this issue, I didn't see my exact problem and the post below [ http://forums.adobe.com/thread/705407?tstart=0 ] just got resurrected from 2010, it didn't appear in my search... though I'm not sure our issue is identical...
Here's a better screenshoht:
And some screen shots of titles:
BEFORE text rendering problem. From a project last year, this typeface is skinnier but rendered much better!
AFTER text rendering problem started. This is the current typeface that, even though a heavier typeface, renders horribly!!
I should add that the titles seem to flicker a bit when transitions are applied to the start or end of title clip.

Quality not the same after exporting movie made up of jpg images

Basically I made an animation sequence on Autodesk Maya and rendered the sequence as 2000 jpeg images each representing 1 frame, put it in one folder and on Adobe Premiere imported and dragged the folder into the timeline to make a moving image so in other words my video is made up of hundreds of jpg images.
Now on the editor it all looks HD and fine but when I export it via file > export > media, in order to match the sequence to the screen I must click on 'match sequence settings' which will snap the whole movie into the window rather than have it widescreen and once I do this I can't modify anything else such as codec, etc (codec is automatically set as MPEG -Frame and the output automatically is mpeg), is this normal? Why is it mpeg ajnd not avi...
So once I export the video with these settings (image uploaded) the quality is ok but not as good as what I see in the Premeire editor, why? What can I do to improve the quality?
On the other hand if I don't click on match to sequence settings and personally customise the paramaters such as avi, I use max settings for many things but after exporting my picture quality actually goes worse compared tomatch to sequence settings? (which has less parameters)
Why is this happening, all my jpeg images are high quality 720p and I should just be able to export it as normal...
I am trying to make a cut-scene to get into Unity so the codec is important as well.
How can I make my video best quality as possible being mpeg or avi? What settings do I need to play with?

Maybe I misunderstood, but did you actually put 2000 still images on the timeline? If so, there is another way. Go to Import and find your folder, and select only the first still in your sequence, then check the box at the bottom of the import windows that says "Numbered Sequence" or something like that. This will import the stills as a "video" clip.
Regarding Export, don't check Frame Blending or Max Render, the first being for a change of frame rate and the latter being useful for a downscale of the frame size.You are doing neither.
Also, never use "Match Sequence Settings". Leave that unchecked, and then choose whatever format YOU want to use for the export, whether .avi or H.264 or whatever.
Thanks
Jeff Pulera
Safe Harbor Computers

White screen in Avid Meridian after export from FCP 6?

After exporting a sequence as 10 bit uncompressed NTSC (using AJA Kona II card) on FCP Ver. 6.06, I imported the file into my Avid Symphony (Meridian).
When I tried to play the file, I could only see a white screen. Audio plays fine.
I have searched Apple, AJA (Kona card) and Avid websites, but can't seem to find a codec or update that addresses this problem.
Any suggestions?

Ahhh...I think the big issue is that you are running that Avid on a PC. So what you need to do is convert the file to the Avid Meridian QT codec, and then bring it over. This means that you need to download that Avid codecs and install those on your Mac.
And there will be a gamma shift...no way around that. You'll have to correct for that on the Avid.

Poor quality after exporting

Hi,
I'm quite new to Premiere Pro and am having problems with the quality of my movie after exporting it. It looks fine within Premiere Pro but once exported it's very shaky and it comes up with red flashes in random places.
When I export the movie, I go to 'Export to Encore' then 'Burn without menus' and select NSTC high quality.
The only thing I can think of is the original source files I am using. My camera only downloads as MOD files which I then convert to MPEG2 files.
I need to screen the video to around a 100 work colleagues at a function on Saturday so any help or suggestions would be most appreciated!!

> The only thing I can think of is the original source files I am using. My camera only downloads as MOD files which I then convert to MPEG2 files.
Correct. Reshoot with a different camera or use different software, like WMM or PE, or anything that is consumer grade software.

Poor audio quality after exporting to .MOV.

Voiceover in my video sounds crystal clear in the timeline but then thin and "rattley" after export when playing back with Quicktime player. Background music on other tracks always seems to be unaffected. Audio export set to AAC, 48 kHZ, Stereo. I must export to a Quicktime .mov format because it's the only file type that I can upload to YouTube without the color quality being distorted after upload. Adobe Updater says all of my programs are updated.
Any help would be greatly appreciated. Thanks!

How did you record the VO? is it a mono or stereo track, how are you viewing the export. Sometimes when just one section of the audio is wrong it is due to audio phase problems, I have not seen this with a vo before but it might be the issue. See:
Re: 1 of 2 audio tracks missing on certain browsers (h.264)

Lenovo G560 - Issue with won't boot and black screen after HDD upgrade

Lenovo G560 - Issue with won't boot and black screen after HDD upgrade.
What happen: My laptop was working fine, no blue screen issue, no funny business at all. I bought a new SSD Intel 120 GB and thought it would be a good idea to replace the HDD. I shutdown and disconnected the power adapter, waited a couple of minutes and removed the battery. I opened up the back case and replaced the HDD. And put all the screws back and put the battery back in.
Problem: The very first time I turned the power on, nothing happens besides a black screen. I pressed the dvd drive it works and opens up and closes. I waited for about 30 mins and still has blac screen. When I mean black screen, no bios menu, no logo, just a black screen with the fan sound on.
I have tried these:
1. Unplugged everything - battery, adapter, and pressed the power on button for about 60 seconds, nothing, the laptop turns on with the LED display on for both on and battery LED's. But nothing but black screen, no sound of windows loading just the fan and black screen.
2. I tried putting back my old 2.5" and nothing but black screen.
Thoughts and suggestions?
Solved!
Go to Solution.

Hi Autoexit173,
Welcome to Lenovo Community!
As per the query we understood that you are facing issue with system not booting in your Lenovo G560 laptop.
As you have mentioned that the system not booting, please try to remove the RAM and turn on the system and check if you can hear any beep sound. Also try to clean the RAM slots and check for the issue.
Click here for the steps to remove the RAM and refer page number 40.
Hope this helps. Do post back if issue persists!
Best regards,
Ashwin.S
Did someone help you today? Press the star on the left to thank them with a Kudo!
If you find a post helpful and it answers your question, please mark it as an "Accepted Solution"! This will help the rest of the Community with similar issues identify the verified solution and benefit from it.
Follow @LenovoForums on Twitter!

Hyperion IR 9.3.1 - Issue in printing the report after exporting it to pdf

Hi All,
I am facing a problem in printing the report after exporting it to pdf format using Hyperion Interactive Reporting 9.3.1. I have set page size of report section to 11X17 inch landscape. Now I am exporting this report section to pdf. Report gets exported to pdf with size 11X17 inch landsacpe. But when I am trying to print this pdf it is shrinking the documnet size to A4 size paper and printing it rather it should print it on 11X17 inch paper size. Please suggest if there is fix available for this issue.
Thanks
Ujjawal

"File > Print Setup > Paper > Size" on PDF.
I think this issue is only to do with the printer and not IR.
I think the question now is "Can your printer print 11X17 pages or not".

After exporting screen recording, just shows a black video.

I've recorded an hour and a half of screen recorded footage. it plays back just fine. It exports fine too! the problem is, once I try to open it after exporting it to desktop,iTunes etc., it doesn't have audio or video. Just a black screen for the whole duration. it'll still play, but it plays all black, no audio... Ultimately, I just want it on my third generation iPad. It wont play back with iTunes, on my iPad or even with Preview. I've tried exporting it in iPad format and in normal 720P mode. so .m4v and .mov .My iMac is 1080P so I should be able to export a 720P screen recording. I was thinking that was the problem. it wont show video to a 480P video when I exported it 720P.. i didn't wanna export 1080P cause it was like 9 GB! any help please? i've messed around with this for days.

Hi ChuckSott
Some questions to help us help you!
# Which websites are causing this problem? A few examples would be grand!
# Does this problem occur in FF35 for Android?
# If you could post a screenshot of the tab's full display being blacked out that would be super helpful
# Have you tried temporarily uninstalling all the add-ons in Tools -> Add-ons? Sometimes add-ons break Firefox!
# Finally what version of Android OS are you using? (ice cream sandwich 4.0, jellybean 4.1-4.3, kitkat 4.4? etc)

Poor quality on movie after exporting it from Premiere Pro CS5.5

Hi!
As a part of my bachelor thesis in industrial engineering, I am making an animation that shows how different types of water turbines work.
The animation it self, I've created in a program called Autodesk Inventor. From Inventor I get an uncompressed video. This video is usually not possible to open directly, but when I convert this with FreeMake video converter, it works
Conversion in FreeMake:
From:
RAWVIDEO
1280 * 720
16:9
663,554 Kbps
30 fps
To:
. Avi, mpeg4
1280 * 720
16:9
3283Kbps
30fps
The video looks great now, but now when i have finished editing the film in Adobe Premiere Pro CS5.5 and exported it, the lines are very blurred and bad. I've attached a picture showing what I mean. I have tried many different settings in Premiere, but i cannot get it any better.
The picture on the left is after exporting, the image on the right is after converting it in FreeMake Video Converter.
Have tried with the flicker removal, but with poor results.
Does anyone have any tips on what I can do?

Thank you for the warm welcome
Yes, the video from autodesk is uncompressed avi. These files are impossible to import in Premiere, and i cant open them in either VLC or WMPlayer.
After a conversion with FreeMake VideoConverter they are possible to import, and they look very good in VLC.
My Sequence settings are:
Editing mode: HDV 720p
Timebase: 29.97 frames/second
Video:
Frame size: 1280*720
Pixel Aspect ratio: Square Pixels (1.0)
Fields: No fields (progressive scan)
Display format: 30fps Drop-Frame Timecode
Audio:
Sample Rate 48000Hz
Display format: Audio samples
Video Previews
Preview File format: I-Frame Only MPEG
Codec: MPEG I-frame
With: 1280
Height: 720
Maximum bit depth and Maximum render quality is checked.
I have tried with a variety of export settings, but my current ones are:
Output:
Format: Quicktime
Video Codec: H.264
1280*720, 29,97 fps, Progressive, Quality 100, 48000Hz, Stereo, H.264
Aspect: Square Pixels
Render at maximum depth
Depth: 24bit
Use maximum render quality.
One thing I find quite strange is that i have to short clips at the beginning, which both seem fine.

Lightroom's Slideshow Module export quality issue

When I export a slide show, the resulting quality of the photos in the pdf is much below that of the photos I see in the Library module. There is a high degree of aliasing (jagged edges) and if I export the slide show at less than 100% quality or at a screen size smaller than my client's, the pixelization renders the slide show useless.
I am using a Mac with the latest OS with a 256mb video card, 2GB RAM, and plenty of harddrive space.
I have confirmed with two other experienced photographers that this is also happening with them.
I have resorted to using Fotomagico as a slideshow software vs. Lightroom for the results from Lightroom are too unprofessional to show my clients.

Pat,
I just checked my slideshow output and it looks good. I can only suggest [and you probably have tried all of these: 1] Make sure your photos look good to start, high res etc. 2] make sure you have the latest Adobe Acrobat Reader [8 I believe] 3] restart LR [I hesitate to even say this]
Beyond that I don't have much to offer.
Good luck
Mel

Photo quality change after exporting

Hello
I'm working on a short film project that should be made from photos not videos (so photos are critical in this iMovie project), but after exporting the movie ( in HD) I found out that the photos' quality were reduced?
Most of the photos are darky, with dark backgrounds, they look good enough in iMovie but after exporting they look lighted up, which ruins my movie.
What should I do??
Thanks in advance

That is odd, I have not been aware of any drop in camera quality via an update with this model. With this being the case I would advise running the update again and choosing the "Repair" option.
What are your thoughts about this forum? Let us know by doing this short survey.
- Official Sony Xperia Support Staff
If you're new to our forums make sure that you have read our Discussion guidelines.
If you want to get in touch with the local support team for your country please visit our contact page.

After exporting a slideshow in LR5 to USB or DVD playing quality is poor. Any suggestions?

After exporting a slideshow in LR 5 to USB or DVD playing quality is poor. Any suggestions?

It would be more helpful to understand your workflow and what type files you have made.
Are you using audio from both cameras? Do the changes/problems correspond with the camera switch?
Try this with a minute of the problem footage
Export a QT reference file(export QT(not QT conversion)-uncheck make self-contained in the lower left)
(a reference file is like a band-aid- do not use more than once). Listen to it in QT- how does it sound?
If you have a mix/audio problem here it is most likely related to what you are exporting from FC.
If it sounds good:
Create an AC3 and MPG2 of your minute test
Create a DVD with a track of your 1 minute test.
Build the dvd to a folder on your desktop.
Open the Video_TS(from the build folder) in the Mac DVD player App. Whatever you see and hear in the app is exactly what will end up on the burned disc. This is the best way to QC the DVD before you burn it.

Quality issues on TV screen after export

Similar Messages

Maybe you are looking for