Quality issues with render (especially with text)

I'm having trouble getting my video render to look the same, quality wise, as my view in After Effects.
Here's a screencap from my After Effects view. Full resolution, 100%.
http://share.shpigford.com/images/aftereffects-20100602-105207.png
Here's a screencap from the video playback in Quicktime after render. Best Settings, Lossless (Animation).
http://share.shpigford.com/images/export-20100602-105317.png
What render settings do I need to get that text crisp when rendering?

I've tried playback with QT7...same problem.
Text is not 3D.
When I import back, no field interpolation is added...it just looks exactly like it was exported (with fuzzy edges).
I am noticing that the problem seems more prevalent on the text that has some motion to it...so maybe it's some weird ghosting/artifacting thing to make the movement smoother? As far as I can tell, I've disabled anything that'd cause that, but maybe there's some setting that I missing?
Something worth noting...if I export the video as a TIFF or PSD sequence with trillions of colors, the frames are crisp as they should be. The problem is that the sequence then become prohibitively large (12MB+ per frame).

Similar Messages

  • Quality issues with VGA port on Type 2504 docking station

    Hi,
    I see quality issues on the VGA output of the Type 2504 docking station with a T61. The monitor image is blurred, not much, but enough to be irritating. When I compare the DVI output with the VGA output on two equal NEC MultiSync LCD 2170NX monitors it is a clear difference. If I connect the LCD monitor to the VGA output of the T61 itself, the picture is clean. I have tried both monitors with different cables in different configurations and also adjusted monitors manually, and my conclusion is that it must be the VGA output of the 2504 that generates the un-sharpness. I have got several 2504 docking stations from the IT department to test and all attempts show the same unsharp picture on the LCD connected to the VGA port of any 2504. Recently a colleague got a new laptop and docking station. He also used DVI and VGA on the old setup and had no visible difference between the two monitors. His new setup is a different T but his new dock is also a 2504. Now he has clear difference between his monitors. He also tried several 2540 docks and cables but the difference is still present.
    The unsharpness is not immediately present when just looking at a dual head setup. But after a while it becomes tiresome to look at text, specially black on white, on the monitor connected to the VGA port. There is a slight shadow on the right side of all letters. When looking at non-aliased fonts, they look as if aliased on the VGA connected monitor. Already aliased fonts tend to "smear" and I have the unpleasant feeling that my eyes are not focusing correctly.
    My question is: Is there a different VGA DAC on the docking station, or are the analog signals just wired through from the laptop VGA DAC? Older IBM docks do not have this problem, we have a lot of them at work in dual head configuration with DVI + VGA to compare, and we only see this problem with the 2504.

    VGA is an analogue signal... so it can be affected by the quality of DAC chip used by the GPU associated electronics, the quality of connectors on the vga out and dock (that is why good analgoue audio equipment use gold plated stuffs) and the quality of copper wire and shiedling used in the cable (i.e. Low Oxygen Content Copper wire).
    The above is general description for all people to use <---- so please don't feel offended if i repeat something that is already said. 
    There is NO conversion electronics on the dock per se, they are just passthrough, so no conversion.
    I guess the problem lies with improper shielding somewhere. I have the same problem with my T61/60 and dock and my T40,41,42,43 on five different docks. 
    So i have ended up using lenovo usb2dvi converter on T61 and have two dvi output and bypassed the vga altogether. 
    Regards,
    Jin Li
    May this year, be the year of 'DO'!
    I am a volunteer, and not a paid staff of Lenovo or Microsoft

  • Quality issues with slideshows

    Hi,
    I'm a long term user of PE v9 (basic editing & burning of home vids & slideshows), but I've just bought a new computer & upgraded to Photoshop & PE v11.
    The first slideshow I created (created in Photoshop & exported to PE for adding music, titles etc) had a lot of issues:
    Some of the photos were rotated 90 degrees & stretched (which I noticed & cut out prior to burning), but more importantly,
    The end product once burned to DVD is of terrible quality.
    I seem to recall that when I first set up PE 9 I set a project quality standard that all future projects would follow unless I changed it.  I've looked everywhere in PE 11 & I can't find where this is set.  I'm not overly technical and I'm out of ideas re: where to look to fix these quality issues.
    Can anyone help?
    Thanks,
    Cozzie.

    Hi Apple Miga,
    I've spent literally hours on this trying all sorts of combinations of settings and ways & means of initiating a slideshow.  To my surprise & absolute elation, I finally had a partial win late last night.  I finally got the quality of the slides to be as good as I've been getting for years with PrE v7.  I haven't been able to work out the rotation & stretching of some photos yet, but I'm at least I've got good quality on the photos that didn't rotate (which is the bulk of them).
    Here's what I did, triggered by a comment above by VDOSurfer (thankyou VDOSurfer).  I had actually already tried setting the project settings to DV-PAL (instead of AVCHD-PAL which I'd been using successfully with PrE v7) a couple of times with the same poor results, but I tried it again in a different order as follows:
    Open PrE11.
    Select 'New Project' (ie not existing project)
    Once the new project opens up, select File, New Project (from the file menu at the top of the screen)
    Click on 'Change Settings' at the bottom of the dialog box.  I noticed here that my settings were always defaulting to NTSC/AVCHD 1080p60.  So I changed this to PAL/DV Widescreen 48kHz (I live in Australia, so if you're in the US, I guess you'd select NTSC/DV Widescreen 48kHz).
    Click on the checkbox 'Force selected project settings on this project'.
    Click on Add Media
    I added my slideshow from Photoshop because I'd already prepared it in that product, but you should be able to add it from wherever your photos live.
    Click on Publish+Share, select DVD & Disk, ensure PAL_DOLBY_Widescreen DVD is selected.  (If you're in the US, this would be NTSC).
    Burn as normal.
    This worked very well for me.  Hope it helps.  Please let me know how you go.
    If anyone has any thoughts on how to stop the random rotation & stretching, I'd love to hear.  Note that photos that are rotated & stretched start off in the correct rotation in Photoshop Elements v11 prior to exporting to PrE 11.
    Thanks,
    Cozzie.

  • Quality issues with IDVD solved

    Hi All
    RE. Best looking IDVD playback.
    May this help all those stuggling with quality issues with perfect looking Qtime files encoded by IDVD coming out looking crap.
    Simply this: instead of exporting your media from your FCP timeline in H.264 - instead select Motion JPEG A. This is found under your setting options in your Qtime movie/settings export window.
    Your files will export much, much faster than Apple's default setting of H.264, you will also get very smooth playback wihtout any jaggies or nasty artifacts. Files are a larger but, hey, it just looks great.
    Let me know if this works for you - it took me ages to figure this out!
    Best regards
    PostGuy40
    Imac 2.16Ghz intel dual core   Mac OS X (10.4.8)   17"

    Good info. I'll keep this in mind next time.

  • Photo Quality Issues with Pixma MG6220

    I am frustrated.  The first photo printed from this printer was of poor quality.  It was very 'grainy' and 'noisey'.  I printed from the printer itself (put camera card into printer).  I then printed from Picasa, same problem, very poor quality.  It was then a couple of months before I attempted printing again.  I printed from PS Elements 11.  The quality was much improved but not what I expected from this printer.  I finally called tech support, after tweaking every setting I could find.  They essentially blamed my computer, wanted to reinstall the drivers and I need to buy new ink cartridges.  It's NOT my computer.  I'm curious as to why they think it's the drivers.  It very well could be bad cartridges.  The printer was purchased in December (six months ago).  I'm wondering why the photo software would make a difference.  I'm irritated that the people I spoke with seemed completely incurious as to what, exactlly, was wrong with the photos.  It would appear that no on else has had this issue.  The reviews for this printer were very good.  I can't imagine reviewing these images and stating that they are "excellent" as I have read from many reviews.  I'll be more than happy to attach scanned images for review (scanner works fine).  Thank you. 

    Hi,
    Check this for scanned images and originals for reference:
    http://flickr.com/gp/skital/Y9615F
    (you can download full-res versions there as well - it's a bit hidden if you don't know flickr)
    This was using Canon Glossy II photo paper and NOT Canon Ink. I was trying different replacement inks over the time and I had similar results.
    I'm a little bit hesitant with spending more money on this printer, esp. that I had never have this kind of quality issues with my previous Canon printer (MP600) when using non canon inks - I had color issues but never grainess.
    Well, I may try original inks again, but it breaks a deal for this printer.

  • TS2681 quality issues with I pad 3, now on my 4th in 3 weeks

    Quality issues with the new Ipad 3 , now on my 4th  in 3 weeks ,  each time marks  / scraches in the metal case are evident,  not what i expect from apple , unable to e mail direct,  

    One of two things is happening.
    1) You have had an unusual run of bad luck. So, return it and try again.
    2) With all respect, you may be so picky, you'll never be satisfied.
    Matt

  • Image Quality issue with script

    So I recently wrote a simple script to output an image at a bunch of different resolutions. However, I am running into an image quality issue that I don't run into when I do the same thing manually.
    Here is an example image showcasing the image: http://terminalvelocity.ca/temp/notworking.jpg
    As you can see along the top of the model's forhead there is destinct color fragmentation. Which seems very strange.
    Here is the script, it is pretty simple, it asks for a few simple config options. (the above image was created using default settings). It then figures out the correct ratios and loops through doing each resize, saving the image, then reverting the history so each iteration uses the original image data and not the resized version:
    doc = app.activeDocument;
    openFilePath = Folder.selectDialog ("Where do you want the images to be saved?");
    maxSize = Number(prompt("What would you like to be the maximum length of the long edge? (Image is never upsized) (pixels)", 2800)); 
    minSize = Number(prompt("What would you like to be the minimum length of the long edge? (pixels)", 100));
    gap = Number(prompt("How much smaller should each image be? (pixels)", 100)); 
    quality = Number(prompt("What quality would you like the JPG exported as (0-12)", 10)); 
    var size;
    var primary;
    var secondary;
    if(doc.width > doc.height){
              primary = doc.width;
              secondary = doc.height;
    }else{
              primary = doc.height;
              secondary = doc.width;
    var ratio = secondary/primary;
    var size = [];
    for(var i = maxSize;i>minSize;i-=gap){
              var  p = i
              var s = i * ratio;
              size.push([p,s]);
    var w;
    var h;
    var n;
    for(var i in size){
              if(doc.width > doc.height){
                        w = n = size[i][0];
                        h = size[i][1];
              }else{
                        w = size[i][1];
                        n= h = size[i][0];
              if(doc.width >= w && doc.height >= h){
                        doc.resizeImage(w,h,null,ResampleMethod.BICUBICSHARPER);
                        jpgFile = new File(openFilePath+"/"+n+".jpeg" )
                        jpgSaveOptions = new JPEGSaveOptions()
                        jpgSaveOptions.embedColorProfile = false
                        jpgSaveOptions.formatOptions =
                        FormatOptions.STANDARDBASELINE
                        jpgSaveOptions.matte = MatteType.NONE
                        jpgSaveOptions.quality = quality
                        app.activeDocument.saveAs(jpgFile, jpgSaveOptions, true,Extension.LOWERCASE);             
                        doc.activeHistoryState = doc.historyStates[doc.historyStates.length-2];
    In comparison, here is an example of an image of the exact same resolution that does not exhibit this issue at all:
    The steps taken to save this image were as follows: http://photography.terminalvelocity.ca/content/images/2012/avery_konrad_6/horizontal/1500. jpg
    Image > Resize > Bicubic Sharper (1500px);
    Save For Web
         Jpeg
         Quality 75
         Optimzed: true
         Progressive: false
         Blur: 0
         Convert to sRGB: true   
    Anyway, as you can see, The manually exported image does not have any of the quality issues that are present within the scripted image. I am pretty new to photoshop scriping so am assuming it has something to do with me missing some sort of option in the save settings. Any help would be swell.
    Also note, this doesn't occur on all images, I usually don't see an issue when using the script, however, something about the tones of this particular photo make it really obvious.
    I am using the latest version of Photoshop CS6 (creative cloud) on Max OSX
    thanks so much!

    I'm on windows find the bicubicsharper does not work well it the image being resized has been highly sharpened all ready. Because of my Photoshop preferences I had to make minor modification to your script. I'm also a bit colorblind so i don't see many color issues so I include a screen capture if what windows does with your image and script.
    var orig_ruler_units = app.preferences.rulerUnits;
    app.preferences.rulerUnits = Units.PIXELS;          // Set the ruler units to PIXELS
    doc = app.activeDocument;
    openFilePath = Folder.selectDialog ("Where do you want the images to be saved?");
    maxSize = Number(prompt("What would you like to be the maximum length of the long edge? (Image is never upsized) (pixels)", 2800));
    minSize = Number(prompt("What would you like to be the minimum length of the long edge? (pixels)", 100));
    gap = Number(prompt("How much smaller should each image be? (pixels)", 100));
    quality = Number(prompt("What quality would you like the JPG exported as (0-12)", 10));
    var size;
    var primary;
    var secondary;
    if(doc.width > doc.height){
              primary = doc.width;
              secondary = doc.height;
    }else{
              primary = doc.height;
              secondary = doc.width;
    var ratio = secondary/primary;
    var size = [];
    for(var i = maxSize;i>minSize;i-=gap){
              var  p = i
              var s = i * ratio;
              size.push([p,s]);
    var w;
    var h;
    var n;
    for(var i in size){
              if(doc.width > doc.height){
                        w = n = size[i][0];
                        h = size[i][1];
              }else{
                        w = size[i][1];
                        n= h = size[i][0];
              if(doc.width.value >= w && doc.height.value >= h){
                        doc.resizeImage(w,h,null,ResampleMethod.BICUBICSHARPER);
                        jpgFile = new File(openFilePath+"/"+n+".jpeg" )
                        jpgSaveOptions = new JPEGSaveOptions()
                        jpgSaveOptions.embedColorProfile = false
                        jpgSaveOptions.formatOptions =
                        FormatOptions.STANDARDBASELINE
                        jpgSaveOptions.matte = MatteType.NONE
                        jpgSaveOptions.quality = quality
                        app.activeDocument.saveAs(jpgFile, jpgSaveOptions, true,Extension.LOWERCASE);            
                        doc.activeHistoryState = doc.historyStates[doc.historyStates.length-2];
    app.preferences.rulerUnits = orig_ruler_units;          // Reset units to original settings

  • Recurring quality issues with HP Elitebook 6930p

    Good afternoon to all forumers,
    I am trying to find out if anyone besides me have the same recurring quality issues with HP Elitebook 6930p? Although these issues have all been resolved by HP. I find it very inconvenient since this is a business notebook and these issues have cause me a lot of down time and grievances. A list of my Elite book issues.
    Warped LCD panel causing the latch not to work. (1 time)
    Dead pixels on new LCD panel replacement (1 time).
    Deteriorated touch pad rubber left button, which I don't use. (1 time)
    Keyboard not working. (2 times)
    Screw holding the top sdie switch panel came off on one corner. Reason being, the screw holder cracked (1 time).
    Reading lack cover on the LCD panel cracked on its own. I rarely use this. (1 time).
    Notebook overheating. The cooling element not working properly. (1 time).
    Defective power adapter, loose contact at adapter  (1 time). Replaced within warranty period.
    I do not know whether to term this as` unlucky' or to say that today's HP business notebook has not got the `Quality' a business notebook should have. I have used other business notebook from HP, namely 2 models from the nx series but they are not as bad as the Elitebook except for the same high operating temperature issue.
     Is there any course of action that I can take up with HP Malaysia? Any advice is greatly appreciated.
    Thank you.
    -Keith CK Loo

    Hi, Keith:
    I have a 6930p and was leery about getting one, after reading this link below from the business support forum, but I only paid $499 for it brand new. I couldn't pass up a deal like that.
    http://h30499.www3.hp.com/t5/Notebook-HP-ProBook-Compaq-Slate/6930p-Quality-Issues/m-p/1066713#M1505...
    I heard that many of the issues you and the others that posted were improved/fixed by HP later on in production. My notebook was built in December of 2010, so it was pretty much the last of the line.
    I have not experienced any problems with mine thus far, after 8 months of light use.  I have tested every component at least once. I know the latch issue was fixed on later models.
    Paul

  • 7925 Phones voice quality issues with wlc 5508 version 7.6

    Hi all,
    I have a mix environment with 1 WLC 5508  and more or less 6 sites with several Access Points ( all AIR-LAP1242AG and all in FlexConnect mode  Hreap ) and several wireless phones (all  CP7925G) . My Ap's have antennas 2.4GHz in all sites except 1 site ( the one i'm talking for now) with 2.4GHz and 5GHz , because of the problems we suggest to have all phone in A BAND (5Ghz) . In this site we force the phones just to A (802.11a only) , power safe NONE , Continuous scan mode , i fallow all in http://www.cisco.com/en/US/docs/voice_ip_comm/cuipph/7925g/7_0/english/deployment/guide/7925dply.pdf , one thing i didn’t do it was apply QoS because I can’t apply several ios commands in that 2960 with lan lite ios.
    So I have 3 SSID for data and 2 for VOICE  ( one is common to all environment and supports 2.4 and 5Ghz , and other just to test one site , with only 5Ghz  with “[WPA2][Auth(802.1X + CCKM)][Auth(FT 802.1X)]”, because I read that problem can be phone rooming , and in FlexConnect only have fast-roaming in a CCKM or a PKM  key-management solution , but even like this the problem still exist) .
    I have another sites with phones in 2.4GHz running well and others with problems.
    i read here in forums lots and lots of people with similar problems , i tried several solutions ( WLC  upgrades versions  and phones firmware's , ….  ) tried all my best of solving the problems mas now I’m running without any ideas , i did also some site surveys and detect some interferers that why I change phones to 5Ghz , and I run also WLC Config analyser to help me , but all without good success. Some changes solve temporarily problems , but after some time , people reclaim about problems.
    I can open a TAC case but first I want be sure if did all already.
    Can someone try to help me?
    ip phone 7925G firmware : CP7925G-1.4.5SR1.3      
    CUCM 8.6.2
    WLC    5508 : 7.6.120.0
    AP : AIR-LAP1242AG-E-K9    7.6.120.0       (flexconnect)
    Best Regards

    Hi Serge,
    Thanks for the suggestions. I have taken care of all the settings. Problem is , the user is seated in his office cabin and using the 7925 and there is around 50db signal strength in his room from an AP which is just outside the cabin. And this doesnt occur often, when we go to check and make calls, everything is fine whereas the user says it happens sometimes in the morning, evening etc... randomly... where the fone goes blank while in a call.... since the problem never happens when we go to troubleshoot the issue, we really dont know what is going on. This is happening when calling PSTN.
    AP's are not restarting and there is no logs indicating that. Wireless infrastructure looks very much OK cos there are other users who are not experiencing this problem and there is ample coverage all over the floor. I am baffled why only one user has this problem even when he is seated in his office cabin.
    Tried changing phones also, but still remains.
    Question  : i tried to do a linktest from WLC to his phone, but it failed, while linktest to laptops are working fine. Does wlc linktest not working for wireless phones ?
    regards
    Joe

  • Has Apple addressed poor sound quality issues with new 160GB iPod classic?

    I just bought a new 160GB iPod classic, replacing a perfectly good 80GB iPod Video (5.5), thinking that the newer one would be superior to my 3 year old model. I discovered that the sound of the new unit was flat and muddy compared to the older model. I found that the 5th gen iPod video was more "spacial", if that's an appropriate word to use; the bass was more present and more clearly defined, as was the rest of the sonic spectrum. I searched several forums to research this issue and while there were numerous references to this issue, all of the posts I found referred to the original iPod classics (80GB and 160GB) and not the later 120GB classics nor the new 160GB classics like the one I bought. Has Apple done anything to address this issue since the first classics were released or are the new ones still suffering from the same sound quality issues as the original classics?

    Based on your observations here, they apparently have not changed the sound quality since the original 160GB classic. I noticed a clear narrowing of the sound stage (ambiance) between the 5.5G 80Gb and my 6G 160GB. You're describing the same characteristic. I don't own the newest 160GB version and came here today to see if it might have improved the sound quality back to the 5.5 spaciousness. Note that the 5.5G has a higher signal to noise ratio than the 6G, making it difficult for me to enjoy it through efficient balanced armature in ear monitors like the Shure SE530s or Ulimate Ears Triple.Fi 10s.

  • BW 3.5 - Issue with formula variable with replacement path

    Dear experts,
    I'm facing an issue with formula variable with replacement path.
    Just to clarify, I know replacement paths is raising a lot of questions but I've been using this functionnality extensively in the past, both in 7.0 and 3.5, so I'm not looking for basic information about how to use it.
    I'm trying to setup a simple report that would show total values per plant of Purchase Order < 100 €
    To do so I've setup a calculated key figure as follow:
    VAR1 * ("PO value" < 100 ) * "PO value"
    VAR1 is a formula variable with replacement path on 'purchase order' and value attribute 'constant =1'.
    (The report has to show values summarized by plant but should not show the detail PO by PO, so I'm not looking at a solution based on condition)
    The report as characteristic "plant" in rows and my CKF in columns.
    Now let's take an example. I have 3 POs in Plant 1:
    PO1 -> 150€
    PO2 -> 90€
    PO3 -> 80€
    Because of the variable with replacement path, the result in my query should be:
    plant1 = 170 (even though characteristic "purchase order" is not in my rows, system should evaluate PO one by one and return values only for those two that are below 100).
    But the result coming is 320, which is wrong.
    I've done the same report on many other 3.5 systems and it worked perfectly, and I am not able to get proper support from SAP OSS who keep saying that this functionnality is not ready in 3.5 (although I've provided screenshot of this working on another 3.5 system!!! how frustrating...)
    They have also pointed to problems of Before and After aggregation but that has absolutely no impact. Once again, the scenario is working perfectly on other 3.5 systems with the same query design, so i'm sure it has nothing to do with Query Designer options.
    Would anyone have ever come to an equivalenet problem? I'm wondering whether the DB itself could not play a role in the variable with ref  characteristic 'constant =1' ...
    Any though is welcome!
    thanks

    Hi,
    The text variable is replaced when the exact date is clear for this key figure column according to the restriction.
    To achive this, please make sure that either the variable is directly restricted in the key figure selection, or that the date characteristic is in drilldown.
    Regards,
    Patricia

  • Printing problem when PDF is sent to the printer with certain fonts - missing text

    I'm running into a printing problem when PDFs containing certain characters of the Calibri font are used.  The text in large sections of the PDF is missing on the paper version, but the text is there on the screen.  It's also happened when the PDFs we created were e-mailed out to a client and printed on their printer.  The problem is not present when printing directly from the programs (Microsoft Word, Excel, Visio, etc.).  I've been trying to get tech support from Adobe on this, but every time I call they apologize and say they will call back in 4-6 hours with an answer.  Same result each time, no call back.  If anyone from Adobe is listening, it's case number 184891587.  The font appears as an embedded subset when I look at the document properties.  Sometimes deleting one or two Characters allows for larger text blocks to be printed - i.e. removing a long dash in bold from the heading of a paragraph makes the paragraph reappear when printed to paper from PDF.  In all cases the PDF appears correct on the screen.  Printing as an image allows the text to appear, but the image quality isn't acceptable for small text, even at the 600 dpi setting on the printer.  If the PDF is sent out by e-mail, we do not have control over the end-user's printer setup anyway, so we need this to work in all cases.  
    The setup/process I'm using is as follows:
    Windows 7 Professional SP1 64-Bit
    Microsoft Office 2013 - problem is present when printing documents from Word, Excel or Visio.  Even other variations on documents. 
    I've tried Acrobat versions 11.0.0 to 11.0.5 as well as Acrobat Pro 11.0.0 and 11.0.1.  Same Result
    Printing to Adobe PDF as the printer, from the third party application
    Printing to a Xerox printer from PDF using Acrobat - Text missing
    Client prints to Konica printer - Text missing
    I print to the wide-format Ricoh (which also does 11x17) and the text is present. 
    Is there something I'm missing?  Is the entire font not getting embedded into the PDF file?  I noticed that rolling back to a much older version of the Calibri font (1.02 compared to 5.72) makes the problem mostly go away, but it's not completely gone.  Is it possible the font is too large to be completely embedded?  Where can I go from here? 

    Success!  At least for now.  It looks like my problem was fixed with Adobe's most recent update, 11.0.06.  From the release notes:
    PDF creation
    Added support for Lotus Notes 9.
    Added support for WebCapture in IE 11.
    Added support for conversions from AutoCAD 2013.
    3652540 A blank pdf is created for files having hidden visual style.
    3601108 Flow Chart converts as a multicolored square.
    3654345 Word documents missing parts of images in conversion to PDF.
    3654572 Temporary file size increases when creating pdf by combining multiple files into one PDF.
    3670155 PDF file created with Distiller XI prints incorrectly to some printers. (Emphasis mine)
    3599407 Checkbox check marks do not appear in these files.
    3663233 IE Web Capture in localized OS: Icons and drop-down menu items are missing and conversion dialog is not localized.
    3651931 Chrome Only: Few web pages when converted to pdf from Chrome plugin doesn’t show up the Save As dialog.
    3597910 EPM Mode On: Web capture is not working on Windows 8-32 bit when cache folder is missing.
    3610644 Firefox 23.0: With Firefox version 23.0 (latest), the WebCapture icon shows up very dim as if it is disabled.
    3650244 ODA falis to convert DWG files to PDF for large files.
    I don't know if that's definately what solved the problem, but it sure sounds similar and this is the update that made the printing problem go away.  We can't get the PDFs to fail at this point with our printers, even with Calibri 5.72.  I'll come back to thread if we have printing problems at the end-user locations. 

  • I'm in trouble with copy paste some text from Word to DW mx 2004

    I'am a new developer in webdesign. I'm doing my first site to
    a cliente. I'm in trouble with copy paste some text from Word to DW
    mx 2004. In the Edit / Preferences / General category i have the
    spelling dictionary in Portuguese (Brasilian). If I wrote the text
    in Portuguese directly from DW i can see the letters with ( ç
    ã é ... ) and in the browser testing ( IE 6.0.2 with sp2
    and FireFox 1.0.7 ), but with copy paste from the text in Word in
    Portuguese when i bring it to DW i can see the ( ç ã
    é ... ) in the beginnig but in the Browsers testing i can't,
    and then after a while i lose the ( ç ã o ...). Can
    anyone help me !?
    I need the work finish in next monday. Thanks a lot.

    Your line breaks will most likely be incorrect if you don't turn on the Japanese Composer.
    It is almost absolutely impossible to accomplish your goal without having a font - any font - installed on your system that has that glyph. However, if it's showing up in Word, than means that you must have that glyph installed, right? What font are you trying to use in InDesign? You might already know that Word will auto-substitute fonts when it encounters a missing glyph, so we really don't know what font is being used to render that one glyph. The whole sentence might be in MS Mincho but one glyph might be pulled from another font if MS Mincho doesn't have that glyph.
    That being said, you're going to break it if you don't know how to set Japanese type in ID. It's not something where you can just copy text out of email and paste into your English layout.

  • Poor quality image with doing videos with photos/images HELP!

    Hello,
    I bought Adobe Premiere Element to make videos with pictures. When I do the video, the quality of my photos is good. When I save the video on my computer or I download it on youtube (example) the quality of my photos is extremely poor. Why? Does anyone can help me? Thank you!

    What Project Preset did you choose at New Project? In the case of Video, composed of Still Images ONLY, you would set that to your desired delivery specs. Not so, if you are also using Video.  I tried several types of parameters. Some parameters give poor quality when I upload it to Youtube (for example) and others in the design of video and upload to YouTube. So which settings should I use for photos only ?
    This sounds like you are talking about the Export/Share settings for output to YouTube.
    What I was asking is what did you start off with, when you were at New Project?
    If you are doing an SD Project, you will have either 720 x 480 (NTSC), or 720 x 576 (PAL) pixels in the Project's Frame Size. If that is what you want, then I would Scale your camera original Stills to 640 x 480 (for NTSC), as you have Square Pixels, and the Project will have either 0.9 for NTSC Standard, or 1.21 for NTSC Widescreen).
    PrE can Scale the Still Images, but the Scaling algorithms in Photoshop are much better, and offer more control.
    Now, if you wish to do an HD Project, just choose that as your Preset, and then use the Images in about their original size. Note, there will be some black borders, as the screen-caps most likely have a different Aspect Ratio, than a Video Project, which for HD will be 16:9. Especially with screen-caps, that are pretty low resolution to begin with, I would NOT do any Scaling, and would live with the letterboxing, or pillar boxing, rather than Scale and effectively Crop.
    Also, when Scaling in Photoshop, I do not Save_As JPEG, as it introduces compression, but only as either PSD (Photoshop's native format), or PNG.
    Good luck,
    Hunt

  • Has anyone had issues with 4G Connectivity with their Windows HTC 8X?

    I recently upgraded to the Windows HTC8X and have not had 4G service since. I've only had the device about three weeks and initially had 4G service. Now I barely get service at all. Ivive in washington DC, the entire city is in a 4G service area yet no matter where I go in the city, no 4G service, only 3G and that is sporatic. HELP!!

    Both inside and outside areas. no issues so far with voice calls or text messages. I cannot access the internet most times, get error messages that page is not found or unable to access the file at this time. Have just abut given up on using the web feature. Will not allow me access to my wifi portal at work. Have powered on and off several times. Another issue I have is when I power off and the phone is connected to the charger it will automatically power back on. I don't like that at all and this phone is just one big battery, you cannot take the battery out and put back in, lol. Have been working with Verizon Tech support for two weeks so far not go with resolving issue. Waiting now for new sim card to see if that helps.
    SANDRA
    Remember;
    It cost you nothing to be a friend. To open your heart to anyone who may be in need of a sympathetic  ear now and then. Even you sometimes feel alone and lost, for the world can be a cold and cruel place.
    >>Personal information and e-mail headers removed<<
    Message was edited by: Verizon Moderator

Maybe you are looking for