Quality level not updated

Hi QM Gurus,
I am facing problem in quality level updation through Dynamic Modification rule.
Setup:
Plant level setting - Inspection lot completion - Skip lot and automatic UD time as
1 minute.
Material master - skips allowed and automatic ud masked for inspection type 01-Goods Receipt
Dynamic modification rule created as 1st inspection stage - one lot needs to be inspected. 2nd inspection stage = two lots to be skipped. then again stage go to 1st stage.(Rule is at usage decision level)
I have assigned the same Dynamic modification rule in inspection plan for respective material.
While doing goods receipt (MIGO), first lot comes to inspection stock and 2nd and 3rd lot is skip lot. after 4th lot should come to inspection stock,but it is still skip the inspection.
When i check Quality level for material "Inspection since change" field is not updating based on the DMR. Suppose 1 inspection completed in Skip stage, but the insp. since change is showing 0 only in the display quality level transaction QDL3.
Please suggest some solution for this.
thanks and regards
murugesan

Dear,
Please refer these threads,
Dynamic Modification Rule In Quality Module
Re: Dynamic modification rule
Regards,
R.Brahmankar

Similar Messages

Ship to Address at line level not Updating to Ship to address at header

Hi All,
While Importing Sales Orders using DTW ,The Order header is correctly updating the logistics Ship to address we mentioned in Address2 Filed . However, the lines is defaulting the shipto address from the Business Partner.The Lines needs to show the same address as the header.
Issue is in SAP 2007 A SP-01 PL-10.
Thanks,
Neetu

HI Gordan,
Thanks for reply.
We are setting ship to code as blank at header level and specifying ship to description.We want similar to be copied to line level.
When entering Orders manually,it is updating corretly but when importing using DTW taking address from BP for LIne Items.
If it updates correct address manually entering orders ,it should update while importing using DTW.
Thanks,
Neetu

Q- LEVEL not updated after max number of skip

Hi Experts
we are using DMR as follows
Stage-- Text -
No of inspection----- Max Duration--New Stage
1- Inspect first 3 deliveries -3 2--
2
2---- Skip next 16 deliveries------ 16 -
365----
3
3--- Inspect 20 th delivery--- 1--
4
4--- Skip next 979 deliveries-- 979-- 9999--
3
5--- Continious inspection due to problem --999 -
1
but here stage 2 remain active upto 40 skip , it should have skip only 16 skip. and suddenly stage changed after exactly 1 year that is after 365 days, that means after max duration exceeded,
waiting for your response....
Thanks & Regards
Pravin

hi,
pl check if the conditin update field in the condition type definition is ticked or not at V/06.
regards
sadhu kishore

Revision level not updated in Delivery inspection

Dear QM friends
I am facing the below issue when implementing delivery inspection.
We are maintaining Engineering Change Number concept and it is applicable for Material Master, BOM and Task lists. So our inspection Plan will always maintained with Change Number for all inspection type.
This Change number concept works fine in GR inspection (Inspection type 01) in following way. Revision number was maintained in Schedule Agreement Line Item, additional Data screen (In administration BOX). When GR was made inspection lot generated and shows the Revision number for the material in inspection lot display QA03 (Header). If plan having same change number system assigns the Plan and releases. Also this revision number can be viewed in QA32 screen itself.
This is failing when creating inspection lot for a delivery. Origin 10 and inspection type used was 10. Inspection plan maintained with change number. Schedule agreement (Sale order) having revision number in the same tab of above said. Even though in lot display QA03 it was not appearing. So the same is not coming in QA32 screen. But inspection plan was attached automatically.
We need same change number (Revision level) concept for Delivery inspection also. Kindly help us, i have missed any masters, or config or any steps i have to do to solve this issue.
Thanks n Regards
Madhan

Any one kindly help us to resolve the issue.
Thanks & Regards
Madhan

Dunning levels not updating as per procedure

Hi gurus
Customers has very old items with dunning level 2 and recent dunning run should be the 3 rd level but till old items has 2 nd level only .
could you please give some information on the smae
regards
Sambha

hi ravi
In proceudre maintaine 4 levels and now the customer has open items form 2008 december
It should be the 4 th level but the old items has 1 st level with new items
please inform the why the level goes to low level
Thanks
Sambha

Quality level maintenance

Hi,
We had initially three plants .For all those plants quality level is maintained for quality managed materials.
But these quality levels having no task list type, task list group and group counter.
I analyzed and found these are created automatically by system when inspection lot is created provided these (quality managed materials) materials should have dynamic rule defined for the inspection type.
Our problem is system is creating these quality levels not in the first instance i.e. it is creating the quality level while creating inspection lot for the second attempt.
I have following queries.
1) what is the use of quality level in inspection lot creation .
2) How the standard settings, if the quality level is created manually to trigger the quality level at first attempt?
3) As I have explained earlier we are creating new plant, if we need to upload cutover data for quality level?
If we do not what will happen? If we need to, then how?
Regards
Dina

Hi,
Quality Level: Def: The quality level is a data record that the system automatically updates at the time of dynamic modification (at lot creation or when the usage decision is made), by checking the conditions for an inspection stage change and, if necessary, storing a new inspection stage for the next inspection.
The information in the quality level determines which inspection stage will be used for the sample determination of the next inspection lot. So, Quality Level works in conjunction with DMR.
1) what is the use of quality level in inspection lot creation .
Quality Level is only for changing Inspection Severity: Reduced-Notma-Tightened Inspections. Because DMR deals with skip lots/char, it keeps changing the Quality level, based on the settings you made in DMR. AQL depends on your industry requirements and is only useful for accepting/rejecting a lot.
2) How the standard settings, if the quality level is created manually to trigger the quality level at first attempt?
In Standard Settings, Quality Level initially is generally set to Normal Inspn. Based on DMR, it changes immediately upon UD. Quality Level can be created using the t-code QDL1, as above. You can change the next inspection severity manually in QDL2.
+3) As I have explained earlier we are creating new plant, if we need to upload cutover data for quality level?
If we do not what will happen? If we need to, then how?+
To start with, you don't have to define any Quality level. However, for DMR, you need to set-up the stages (severities) of inspection. That will ensure that Quality Levels are automatically updaed. Regards, KrishnaM

PGI status at delivery header level has not updated

Dear Friends,
We had created deliver, picking was completed and PGI was completed successfully. However when we try to create Billing, an error occurs stating that PGI is not completed.
Further when we check the delivery, the Goods Issue status at item level is completed but at the Header level the GM is B which is partially completed. In the Document flow we can see the PGI Status is completed.
I think there might be some table which was not update. Is there any way to update the status in the delivery?
Further we tried to reverse the PGI through VL09, but system is not able to find the delivery ..this might be because the system might be checking in some table where the statues has not updated.
Please suggest me how should I complete this.

HI,
Go to transaction "SE16N" and enter table "VBUK" and give the delivery number in the field sales document number. Now you type "&SAP_EDIT" in the transaction bar and execute. Here you can change the status(Total goods movement). And see If you can actually bill the document. Kindly please let me know If you need any more information on this.
Regards,
Ram Pedarla

Error in psa level - Request not updated to any data target using delta

Hi,
This is pavan and am facing this issue any one know for below issue to solve.
Data Flow is BW Version and Implemented in BI 7.20 version.The issue was data has come
to psa level but from here it is not updated to infocube so for that i have tried update manually
it is showing information that 1334 SID IS SMALLER THAN / EQUAL TO 47287 CANCELLED.
In Process Chain DTP is not included so how can i update data to infocube with out disturbing process chain
Regards,
Pavan Kumar

Hi Pavan Kumar ,
Please log on Tcode RSRQ -then give old request number (I think in your case 1334 is old request number),
and you will get monitor for that request then change the QM status to red after that load new request .
Thanks
Hanumanthu

Incoterms on Item level is not updated on STO.

Issue: they have created a STO with wrog incoterm, now the issue is that the Incoterms on PO--> Item level is not updated if Incoterms on Header level is changed. I suggested them to change incoterm on item level manually, but user is saying the problem is that SAP doesn't change automatically Incoterms on item level if Incoterms on Header level are changed??
What user is saying..Is this correct? or any thoughts/solution to fix this issue?
Can anyone suggest me on this?
Thanks & Regards
Suresh Babu

HI,
Try this link
How Incoterms gets defaulted for STO
Regards
KK

Printing quality Is not clearly after Acrobat 8.1.2 Pro updating (HP Deskjet 9800)

*** The contents wrote with the auto compiler. (Korean -> English)
*** Meaning of the writing could not be delivered smoothly.
From Adobe Reader 8.1.2 Application Printing quality Is not clearly after Adobe Acrobat 8.1.2 Professional updating.
To previously there was not a problem to printing quality.
Like this problem gets why?
--- System
OS : Mac OS X 10.5.2 Leopard
App : Adobe Reader 8.1.2
Printer : HP Deskjet 9800 (Driver : HP web download v9.7 lastest or Leopard include)
App : Preview.app (Leopard Default Viewer) - Printng quality is good. But is not the Adobe Reader.
Adobe Acrobat 8.1.2 Professional update : 2008-02-20 (Korea)

Problem solved. Does only happen with the Internet Explorer 32bit.
With Internet Explorer 64bit it doesn't happen.
Frederik

Dunning could not update dunning level in customer master data!

Dear experts,
I have an issue-that after I ran F150, it did not update dunning level in customer master data. The customer have an overdue invoice and the number of days reached the one of the dunning level. And I did not set the ammount limitation.
Could anyone tell me the reason?
Thank you in advance~
Flora

Hi Linda,
You can block the items of a customer without blocking his account completely by allowing his account for dunning program.
1. Allow the customer account for dunning
2.Edit the dunning proposal and block the items individually to the customer and save.
3.Now you can see the dunning notices for only unblocked items of the customer.
Thank you,
Ramesh.

Quality level update

Hello
We want to set the deletion date for the Quality level . How to update it mass , Any help will be highly appreciated
Thanks
Nic

Hi
Use QDL2 tcode
Enter material plant & vendor.for mass processing use LSMW
Regards
Sujit

Transfer Order Confirmation not updated in Header level (Table: LTAK)

Hi,
We are facing a problem, transfer order header is not updated with confirmation, but TO items are confirmed and resulting these transfer order to display in RF monitor (LRF1 and LRF2 transactions).
And the other issue is, we are seeing some transfer orders created without item data (in LTAP table) and unable to confirm these TOs since Item data is not available, hence TO header is not updated with confirmation and resulting these TOs to display in LRF1 and LRF2 report.
I have cleared some transfer orders by updating the confirmation field in LTAK table through debugging. But we see the issue is ongoing and would like to have permanent solution.
It will be a great help if anyone have solution to these issues.
Thanks & Regards,
Nagarjun

Hi Nagarjun,
do you have any Z code in-between ? Did you check OSS notes ? Did you apply all patches to your system ?
What you are describing is something usual when Z programs were developed, you should provide more details for analysis.
Many thanks,
Enrico

Partner Bank Type not Updating

When running transaction F-110, the programme will not pick up DM documents on customer accounts due to the fact the Partner Bank Type field is not populated.
As such I have to do this manually for each vendor every month. If this was populated invoices would be automatically netted against debit memo's
to explain what's happening in our company here is the process...
When we order a material from vendor - we normally raise a credit memo, after that when the quality department finds any fault with the product what they do is they do some repair work and they create a surcharge against it. This surcharge will create a creditmemo.
Quality Management is implemented in our systems.
A notification is created in Qm01
Surcharge is added in Qm02
And this produces a debit memo request (a sales order) in Va03
Every night Batch input session runs in VF04 and billing document is produced.
From billing document u2013accounting document is produced.
Here when we run F110- it should normally net off credit balance with the new debit balances, but F110 cannot select these documents as partner bank type is not updating.
(Both master records checked. And its happening for all the vendors)
1) whether there is an opportunity to create (or) populate the field Partner bank type in creation of billing document.
2) Any BTE's will help me like (00001120).
Please help me,
cheers

Hi Dove,
I think you can use a substitution for field Bank Type at Item Level (TCODE OBBH). This would fill your bank type when you post the document in FI, then you won't have problems in F110.
Hope that helps.Cheers.
Ignacio.

Quality level

Hi,
We are migrating QM related master data from 4.6C to ECC6. We have loaded inspection plan. Please let me know the importatnt fields that we have to check in inspection plan.
When we try to load quality level, it gives an error stating inspection plan for inspection lot does not exist. At material master level, inspection type has dyn modification rule.
The quality level created when GR is done. Please tell me quality level belong to master data . If so how we can load the quality level.
Thanks
Rajkumar

Hi,
Quality level is master data.
AT HEADER LEVEL
Usage                      Maintained
Status                      Maintained
DMR                      Not maintained
Inspection point                                Not maintained
Sampling drawing procedure                                        Not maintained
AT OPERATION LEVEL
Work center                                      Not maintained
control key                                      Maintained
AT CHAR LEVEL
Preset indicator                                Not maintained
MIC                     Maintained
Inspec Method                Maintained
DMR                     Not maintained ? why
sampling procedure                                Maintained
PRT                     Maintained
Till date the quality level is being created without DMR, inspection point and sampling drawing procedure.
From your reply i have understood the following. if my assumption wrong, please tell me.
1. As per your suggetion, copying the quality level from one system to another is not possible
2. If loaded, then DMR to be load in inspection plan creation and create quality level with initial stages. Then change the go to QDL2 and change the skip status.
If skip status is updated in QDL2, then what will happen to usage decision, lot created and other sctivities table entry in old system. or once updated, system will automatically create the necessary entries.
Please clarify.
Thanks
RAJKUMAR

Quality level not updated

Similar Messages

Maybe you are looking for