Quality level update

Hello
We want to set the deletion date for the Quality level . How to update it mass , Any help will be highly appreciated
Thanks
Nic

Hi
Use QDL2 tcode
Enter material plant & vendor.for mass processing use LSMW
Regards
Sujit

Similar Messages

Quality level not updated

Hi QM Gurus,
I am facing problem in quality level updation through Dynamic Modification rule.
Setup:
Plant level setting - Inspection lot completion - Skip lot and automatic UD time as
1 minute.
Material master - skips allowed and automatic ud masked for inspection type 01-Goods Receipt
Dynamic modification rule created as 1st inspection stage - one lot needs to be inspected. 2nd inspection stage = two lots to be skipped. then again stage go to 1st stage.(Rule is at usage decision level)
I have assigned the same Dynamic modification rule in inspection plan for respective material.
While doing goods receipt (MIGO), first lot comes to inspection stock and 2nd and 3rd lot is skip lot. after 4th lot should come to inspection stock,but it is still skip the inspection.
When i check Quality level for material "Inspection since change" field is not updating based on the DMR. Suppose 1 inspection completed in Skip stage, but the insp. since change is showing 0 only in the display quality level transaction QDL3.
Please suggest some solution for this.
thanks and regards
murugesan

Dear,
Please refer these threads,
Dynamic Modification Rule In Quality Module
Re: Dynamic modification rule
Regards,
R.Brahmankar

Quality level

Hi,
We are migrating QM related master data from 4.6C to ECC6. We have loaded inspection plan. Please let me know the importatnt fields that we have to check in inspection plan.
When we try to load quality level, it gives an error stating inspection plan for inspection lot does not exist. At material master level, inspection type has dyn modification rule.
The quality level created when GR is done. Please tell me quality level belong to master data . If so how we can load the quality level.
Thanks
Rajkumar

Hi,
Quality level is master data.
AT HEADER LEVEL
Usage                      Maintained
Status                      Maintained
DMR                      Not maintained
Inspection point                                Not maintained
Sampling drawing procedure                                        Not maintained
AT OPERATION LEVEL
Work center                                      Not maintained
control key                                      Maintained
AT CHAR LEVEL
Preset indicator                                Not maintained
MIC                     Maintained
Inspec Method                Maintained
DMR                     Not maintained ? why
sampling procedure                                Maintained
PRT                     Maintained
Till date the quality level is being created without DMR, inspection point and sampling drawing procedure.
From your reply i have understood the following. if my assumption wrong, please tell me.
1. As per your suggetion, copying the quality level from one system to another is not possible
2. If loaded, then DMR to be load in inspection plan creation and create quality level with initial stages. Then change the go to QDL2 and change the skip status.
If skip status is updated in QDL2, then what will happen to usage decision, lot created and other sctivities table entry in old system. or once updated, system will automatically create the necessary entries.
Please clarify.
Thanks
RAJKUMAR

Quality level maintenance

Hi,
We had initially three plants .For all those plants quality level is maintained for quality managed materials.
But these quality levels having no task list type, task list group and group counter.
I analyzed and found these are created automatically by system when inspection lot is created provided these (quality managed materials) materials should have dynamic rule defined for the inspection type.
Our problem is system is creating these quality levels not in the first instance i.e. it is creating the quality level while creating inspection lot for the second attempt.
I have following queries.
1) what is the use of quality level in inspection lot creation .
2) How the standard settings, if the quality level is created manually to trigger the quality level at first attempt?
3) As I have explained earlier we are creating new plant, if we need to upload cutover data for quality level?
If we do not what will happen? If we need to, then how?
Regards
Dina

Hi,
Quality Level: Def: The quality level is a data record that the system automatically updates at the time of dynamic modification (at lot creation or when the usage decision is made), by checking the conditions for an inspection stage change and, if necessary, storing a new inspection stage for the next inspection.
The information in the quality level determines which inspection stage will be used for the sample determination of the next inspection lot. So, Quality Level works in conjunction with DMR.
1) what is the use of quality level in inspection lot creation .
Quality Level is only for changing Inspection Severity: Reduced-Notma-Tightened Inspections. Because DMR deals with skip lots/char, it keeps changing the Quality level, based on the settings you made in DMR. AQL depends on your industry requirements and is only useful for accepting/rejecting a lot.
2) How the standard settings, if the quality level is created manually to trigger the quality level at first attempt?
In Standard Settings, Quality Level initially is generally set to Normal Inspn. Based on DMR, it changes immediately upon UD. Quality Level can be created using the t-code QDL1, as above. You can change the next inspection severity manually in QDL2.
+3) As I have explained earlier we are creating new plant, if we need to upload cutover data for quality level?
If we do not what will happen? If we need to, then how?+
To start with, you don't have to define any Quality level. However, for DMR, you need to set-up the stages (severities) of inspection. That will ensure that Quality Levels are automatically updaed. Regards, KrishnaM

Quality scores updation

Hi Gurus ,
Can anybody tell me How quality scores updates in system for a material or vendor . As per my knoweledge Scores update only by Usage decision codes . Is any othe thing from which score gets updated .
Suppose i make defects recording and based upon that i make a notificaton , then the defects wt i have activited in system , by determining that can quality score gets updated .
For quality scores we mention values in QS51 (selected sets). and we also mention values for Defects class also , my question is score which i maintained in Defects clases wt is effect of these score .
Thanks in advance .
Amit

Please go through this and come back with your question, where are you did the setting, did you do any settings, if so which level, pl let us know
Define Quality Score Procedure
In this step, you define the procedures for determining the quality score.
The quality score procedure is defined in the inspection setup for the material master at plant level. You can define a default value for this procedure in the inspection type.
Requirements
The following specification limits have been defined in theSettings at Client Level.
Highest quality score
Lowest quality score
Lower limit for good quality
If you want to use quality score procedures that access the weighted shares of defects for the characteristics, you must maintain the characteristic weights.
If you want to use quality score procedures that access the quality score of the characteristics, you must maintain thedefect classes.
If you want to use quality score procedures, in which the system calculates the share of scrap, you must:
Check whether procedures for estimating the scap share have been defined inCustomizing
Assign suitable procedures for estimating the scrap share to the characteristics in the task list
Identify inspection characteristics as relevant for scrap in theircontrol indicators
Standard Settings
A number of commonly used procedures for determining the quality score are implemented in the standard system:
Quality score from the usage decision
Quality score from the share of defects in the lot
Quality score from the shares of defects for the characteristics
From the maximum share of defects
From the weighted average share of defects
Quality score from the quality score of the characteristics
From the minimum (worst) quality score
From the weighted average quality score
The table has the delivery class G. The following name range is reserved for the user
Quality score procedure 9, A, ... , Z*
Recommendation
Use the procedure in the standard system.
Decide on certain procedures for each inspection type; if possible, do not differentiate according to material groups or plants.
Activities
1. Determine which procedures for calculating the quality score should be used. You can make a distinction on the basis of the:
---Plant
---Inspection type
2. Modify the table of quality score procedures according to your needs. If the procedures contained in the standard system are not sufficient, you must create additional procedures using function modules.
3. Define the quality score procedures in the Default Values for the Inspection Type or in the inspection setup for the material.

Photoshop CS4 has quit asking for quality level when 'Saving As'?

Windows Vista 64bit / CS4 v11
I had to reinstall CS4 after a hard drive failure. In the new setup, Photoshop CS4 has quit asking for quality level when 'Saving As'? Help appreciated, IM

ImageMan II wrote:
Windows Vista 64bit / CS4 v11
I had to reinstall CS4 after a hard drive failure. In the new setup, Photoshop CS4 has quit asking for quality level when 'Saving As'? Help appreciated, IM
It depends on the original format and the destination format of the file.
PS: You should upgrade to version 11.0.1

Order management header level updation process for iStore order.

Hi all,
I worked on OM header level updation process for iStore order.only card holder name,expiration date updated using OE_ORDER_PUB.process_order but Credit card number,card type not updated for istore order in OM.so please help to me.
CODE:
SET SERVEROUTPUT ON;
DECLARE
v_api_version_number NUMBER := 1;
v_return_status VARCHAR2 (2000);
v_msg_count NUMBER;
v_msg_data VARCHAR2 (2000);
-- IN Variables --
v_header_rec oe_order_pub.header_rec_type;
v_line_tbl oe_order_pub.line_tbl_type;
v_action_request_tbl oe_order_pub.request_tbl_type;
v_line_adj_tbl oe_order_pub.line_adj_tbl_type;
-- OUT Variables --
v_header_rec_out oe_order_pub.header_rec_type;
v_header_val_rec_out oe_order_pub.header_val_rec_type;
v_header_adj_tbl_out oe_order_pub.header_adj_tbl_type;
v_header_adj_val_tbl_out oe_order_pub.header_adj_val_tbl_type;
v_header_price_att_tbl_out oe_order_pub.header_price_att_tbl_type;
v_header_adj_att_tbl_out oe_order_pub.header_adj_att_tbl_type;
v_header_adj_assoc_tbl_out oe_order_pub.header_adj_assoc_tbl_type;
v_header_scredit_tbl_out oe_order_pub.header_scredit_tbl_type;
v_header_scredit_val_tbl_out oe_order_pub.header_scredit_val_tbl_type;
v_line_tbl_out oe_order_pub.line_tbl_type;
v_line_val_tbl_out oe_order_pub.line_val_tbl_type;
v_line_adj_tbl_out oe_order_pub.line_adj_tbl_type;
v_line_adj_val_tbl_out oe_order_pub.line_adj_val_tbl_type;
v_line_price_att_tbl_out oe_order_pub.line_price_att_tbl_type;
v_line_adj_att_tbl_out oe_order_pub.line_adj_att_tbl_type;
v_line_adj_assoc_tbl_out oe_order_pub.line_adj_assoc_tbl_type;
v_line_scredit_tbl_out oe_order_pub.line_scredit_tbl_type;
v_line_scredit_val_tbl_out oe_order_pub.line_scredit_val_tbl_type;
v_lot_serial_tbl_out oe_order_pub.lot_serial_tbl_type;
v_lot_serial_val_tbl_out oe_order_pub.lot_serial_val_tbl_type;
v_action_request_tbl_out oe_order_pub.request_tbl_type;
v_msg_index NUMBER;
v_data VARCHAR2 (2000);
v_loop_count NUMBER;
v_debug_file VARCHAR2 (200);
b_return_status VARCHAR2 (200);
b_msg_count NUMBER;
b_msg_data VARCHAR2 (2000);
BEGIN
DBMS_OUTPUT.PUT_LINE('Starting of script');
-- Setting the Enviroment --
mo_global.init('ONT');
fnd_global.apps_initialize ( user_id => 1013438
,resp_id => 21623
,resp_appl_id => 660);
mo_global.set_policy_context('S',204);
-- Header Record --
v_header_rec := oe_order_pub.g_miss_header_rec;
v_header_rec.request_date := SYSDATE;
v_header_rec.header_id := 251413;
v_header_rec.credit_card_holder_name :='esakki';
v_header_rec.credit_card_number := 'XXXXXXXXXXXX3510';
v_header_rec.credit_card_expiration_date := to_date('01-JAN-2014','dd-mon-yyyy');
v_header_rec.credit_card_code := 'MASTERCARD';
v_header_rec.payment_type_code := 'CREDIT_CARD';
v_header_rec.sold_to_org_id := 131747;
v_header_rec.sold_from_org_id := 204;
v_header_rec.ordered_date := SYSDATE;
v_header_rec.operation := OE_GLOBALS.G_OPR_UPDATE;
v_action_request_tbl (1) := oe_order_pub.g_miss_request_rec;
-- Line Record --
v_line_tbl (1) := oe_order_pub.g_miss_line_rec;
DBMS_OUTPUT.PUT_LINE('Starting of API');
-- Calling the API to update the header details of an existing Order --
OE_ORDER_PUB.PROCESS_ORDER (
p_org_id =>204
,p_operating_unit => NULL
p_api_version_number => v_api_version_number
,p_init_msg_list => fnd_api.g_false
,p_return_values => fnd_api.g_false
,p_action_commit => fnd_api.g_false
, p_header_rec => v_header_rec
, p_line_tbl => v_line_tbl
, p_action_request_tbl => v_action_request_tbl
, p_line_adj_tbl => v_line_adj_tbl
-- OUT variables
, x_header_rec => v_header_rec_out
, x_header_val_rec => v_header_val_rec_out
, x_header_adj_tbl => v_header_adj_tbl_out
, x_header_adj_val_tbl => v_header_adj_val_tbl_out
, x_header_price_att_tbl => v_header_price_att_tbl_out
, x_header_adj_att_tbl => v_header_adj_att_tbl_out
, x_header_adj_assoc_tbl => v_header_adj_assoc_tbl_out
, x_header_scredit_tbl => v_header_scredit_tbl_out
, x_header_scredit_val_tbl => v_header_scredit_val_tbl_out
, x_line_tbl => v_line_tbl_out
, x_line_val_tbl => v_line_val_tbl_out
, x_line_adj_tbl => v_line_adj_tbl_out
, x_line_adj_val_tbl => v_line_adj_val_tbl_out
, x_line_price_att_tbl => v_line_price_att_tbl_out
, x_line_adj_att_tbl => v_line_adj_att_tbl_out
, x_line_adj_assoc_tbl => v_line_adj_assoc_tbl_out
, x_line_scredit_tbl => v_line_scredit_tbl_out
, x_line_scredit_val_tbl => v_line_scredit_val_tbl_out
, x_lot_serial_tbl => v_lot_serial_tbl_out
, x_lot_serial_val_tbl => v_lot_serial_val_tbl_out
, x_action_request_tbl => v_action_request_tbl_out
, x_return_status => v_return_status
, x_msg_count => v_msg_count
, x_msg_data => v_msg_data
DBMS_OUTPUT.PUT_LINE('Completion of API');
IF v_return_status = fnd_api.g_ret_sts_success THEN
COMMIT;
DBMS_OUTPUT.put_line ('Order Header Updation Success : '||v_header_rec_out.header_id);
ELSE
DBMS_OUTPUT.put_line ('Order Header Updation failed:'||v_msg_data);
ROLLBACK;
FOR i IN 1 .. v_msg_count
LOOP
v_msg_data := oe_msg_pub.get( p_msg_index => i, p_encoded => 'F');
dbms_output.put_line( i|| ') '|| v_msg_data);
END LOOP;
END IF;
END;
OUTPUT:
Starting of script
Starting of API
Completion of API
Order Header Updation Success : 251413
Thanks,
saran

Forgot to mention :Soruce is Oracle EBS

Changing quality level on cancellation of a GR

Hello,I need help.
I have a dynamic modification rule on lot creation and at characteristic level.
At level one of the dynamic modification rule I have inspection for the characteristic and if the result is correct I donu2019t want to inspect it another time until 6 months later.So, the level two is an skip level.
But I have a problem. When I make the first GR and the first lot is created with quality level register . If for some reason I have to cancel this GR and this cause at the same time the inspection lot cancellation, the level quality remains on level 2 which is on skip and not return to level one till 6 months later.
Do you know if there is something I'm not doing well?. Is just the system that works in this way?
Thanks in advance,

Problem is solved. For future reference, I use
Say, start_id is the root or they node you want to start,
Select level
FROM table
START WITH PRIOR node_id = start_id
CONNECT BY node_id = parent_node_id
This will show all the children under start_id.

Quality score & quality level

Hi Experts,
Can anybody please help.New comer in QM.Please help.
How system calculate Quality score & quality level.What setting required for it. And where it is use. Please do not suggest sap library or F1 help.Please help.

hi
Evaluation of Quality Levels
You can use this function to can select quality levels, display the selected quality levels in a list, reset or tighten selected quality levels, display the data and dynamic modification rules for selected quality level records, and display the dynamic modification history for quality levels as a graphic or in a list.
Quality levels that have been deleted can no longer be evaluated (that is, you can no longer obtain a dynamic modification history of the inspection lots that were included in these quality levels).
If the system finds more than one quality level record for the selection conditions, it switches to a dynamic selection list that contains all quality levels that meet the selection conditions.
If only one quality level exists for the selection criteria, the system switches directly to the dynamic modification history list for the corresponding quality level. The dynamic selection list appears by choosing Goto ® Back. You can make changes in this list. There are the following functions in the dynamic selection list:
In the transaction Edit list (menu path: Logistics --> Quality management --> Quality inspection -->Quality level -->Edit list)
Creating a Quality Level Manually
Use
In most cases, you will not need to create a quality level manually. However, if you are implementing the Quality Management (QM) application component for the first time, you may want to enter data for the quality levels recorded in your previous system.
Prerequisites
You can only create a quality level manually for lot-based dynamic modification.
Procedure
Choose Logistics -->Quality management --> Quality inspection --> Quality level --> Create.
Enter the necessary data on the initial screen for creating a quality level and choose Quality level.
You define the dynamic modification criteria (material, vendor, manufacturer, or customer) and the inspection plan for which the quality level will be maintained on the initial screen.
Enter the following data on the screen for creating quality levels:
Next inspection stage
Number of inspections or inspection lots that (based on the dynamic modification valuation) have been completed since the last inspection stage change or were accepted without an inspection (skip)
Number of inspections or inspection lots (based on the dynamic modification valuation) that were rejected since the last inspection stage change
Reset date on which the quality level again uses the initial inspection stage (specified in the dynamic modification rule) as the current inspection stage
Earliest possible deletion date for the quality level
The system makes entries in all other fields if:
An inspection lot is created.
A usage decision is made.
Save your data.
The initial screen for creating a quality level appears and the system informs you that the quality level was created.
-ashok

Reset Date in Quality Level / DMR.

Business Requirement = Vendor Annual Certification. All batches received by the vendor during the year goes through minimal inspection and on the 365th day (reset period (days) in DMR) it changes to the initial stage of the DMR.
However, the reset date field in the Quality level screen resets itself on the basis of the "date of last Inspection" field in the same screen. This field changes every time a UD or MIGO is executed. Therefore, the true 365th day is never reached and so the quality level never resets to the original stage.
I'd like to change the functionality of the reset date in the Quality Level screen to reset after the yearly requalification sample (to conform to the reset period in the DMR), as opposed to after every inspection UD/MIGO. The reset date should "reset" after the initial inspection stage (in the DMR) is completed.
Is there a way to do this through config or a user exit, or something else? Thanks in advance,

To fulfill this requirement created DMR as following:
Stage -1: InspeServ-4, Skip - Blank, Ist - Select check box, Stc - select, No of insp - 1, Next stage -2, reject -1, Nect -Stage 2.
Stage 2: InspServ - blank, Skip - select check box, Ist - skip, Max. skip duration - 365, next - stage 1, reject - 1, next - stage 1.
Hope this would help you.
Thanks!!!

Modification Dynamic Rule - SAP Migration - Quality Level

Hi Experts!!
Could you tell me if I can have the same quality level for one material when I do a SAP Migration? For example, currently we are working in the release 4.7 and my quality level for a specific material is in the step n. 6 and our total cycle are 10 steps. My doubt is when I will be working in the new version (5.0) I can start my quality leve from step n. 6? Or is it mandatory to start from step n. 1 again?
I don´t know if my doubt is clear but I would like to thank you for help me in this issue.
BR
Valdevair

No when you transfer data from one client to other or in SAP Migration,Quality level will never be as that of the old.It will reset no doubt.
What you can do is
1.Create all master data like DMR with Task list etc
2.Get the database of old system with current quality level with combination of Vendor-Material.
3. Run the QDL2 with some LSMW for combination of the Vendor & material.
4.Reset the level to desired level.
I hope this will add some value

Change quality level in mass ?

Hi,
I would like to change quality level for all materials of a vendor.
I found transaction QDL2 but it is only for one material.
Is it possible to do it with a mass transaction ?
Thank you for your answer.
Aurelie.

Thanks, but I still have to change quality level one by one material... Is it possible to change a list of materials of a vendor ? For example, add 5 stages to all the quality levels of a vendor's materials.

Patch Level Update Notifications

What is the best way to receive notification of new Patch Level updates? For my Business One setup, I subscribe to the SAP B1 update RSS feed, so I get instant notification of patches as they are available. Is there something similar for WebTools?

What if we just made this a sticky post and had it updated every time that a patch was released? Then anyone could subscribe to the thread by email or by RSS, plus it would be at the top of the forum for everyone to see.

Quality level modification

HI,
The quality level changes using the dynamic modification rule , sap records the number of lot accepted or rejected since the last change. According to others norms, the change should be done after n successive acception or rejection, does someone has encounter the same problem ?
Thanks,
Frédéric

HI,
If R is for rejected inspection lot and A for accepted inspect lot and 2 rejections reinforce the quality level .
SAP works as following R A A A A A R (the quality level is reinforced) .
The norms indicates to work as following R A A A A A R A A A A R R (the quality level is reinforced) only when successives rejection are taken. So it's hard to degrade the quality level.
As SAP behaviour seems not to follow the norms , I wonder how this point is implemented in others companies.
Others points, when the quality level is bad, the norms indicates a full control which generate an heavy inspection load when dealing with retail company. Same question, how it works in other companies ?
regards,
Frédéric

Cineform Quality Levels - Do they mean something?

I'm very excited that those of us on Windows now have a decent intermediate codec in Cineform. I'd previously used CF through QT but it was pretty clunky so I'm glad it's fully integrated now. However, in the encoding presets there's a "quality" parameter with no explanation in the help files or online that I can find. It defaults to 4 but goes from 1-5. What does this mean? Cineform itself has quality levels of low,medium, high, film scan 1, film scan 2, and I think one other. So what are these? I've tested a bit and they definitely control bitrate but there is no good way to tell which ones are still considered visually lossless, which is what I'm going for. Ideas?

The quality values link as such:
1 - Low
2 - Medium
3 - High
4 - Film Scan 1
5 - Film Scan 2
Sorry for the confusion. I'll contact the documentation team and see about getting something put in there to explain this better.

Quality level update

Similar Messages

Maybe you are looking for