Quality loss after exporting finished sequences.......

Hello,
I notice when I am working with the footage, it looks like great quality in the viewer, however when I export it out of the final cut express, I notice it does not look as clear as before. I am using final cut express. When I drop the raw footage into the time line, I notice that the blurb "match with clip settings" i always say yes.
Please let me know any and all input. Thanks!
Happy New Year!

Hi Al,
Sequence Properties:
Tracks: 2V, 4A
Vid Rate: 29.97 fps
Frame Size: 720x480
Compressor: DV/DVCPRO-NTSC
Pixel Aspect: NTSC-CCIR 601
Anamorphic: it has a check mark
Field Dominance: Lower (even)
Everything else is blank
Clip properties:
Vid Rate: 29.97 fps
Frame Size: 720x480
Compressor: DV/DVCPRO-NTSC
Data Rate: 3.6 MB/sec
Pixel Aspect: NTSC-CCIR 601
Anamorphic: is not checked ( maybe this is the problem as in the sequence settings it is)
Field Dominance: Lower (Even)
Alpha: None/Ignore
Composite: Normal
Please let me know if this helps. I do not know how to do a screen shot, if you need just tell me how to do it and I will.
Thanks!

Similar Messages

  • Quality loss after exporting 1280 x 960 30fps footage

    Hello everyone,
    Everytime I edit and export footage shot with my GoPro camera (1280x960p, 30fps) the quality gets a little less. Very frustrating as I am clueless after a long time of looking for what I'm doing wrong..
    I use Premiere Pro Version 4.2.1
    Sequence presets:
    General
    Editing mode: Desktop
    Timebase: 29,97fps
    Video Settings
    Frame size: 1280h 960v (1,0000)
    Frame rate: 29,97 frames/second
    Pixel Aspect Ratio: Square Pixels (1.0)
    Fields: No Fields (Progressive Scan)
    Export settings:
    Format: H.264
    Preset: Custom
    TV Standard: NTSC
    Frame Width: 1280
    Frame Height: 960
    Frame Rate (fps) 29.97
    Field Order: None (Progressive)
    Pixel Aspect Ratio: Square Pixels.
    Has anybody got an idea what could help here?

    Thanks for the replies guys, but unfortunately the problem isn't really solved yet..
    I tried checking the maximum render quality, but that only resulted in my laptop not being able to smoothly play the exported video.
    Filming with the 1280 x 720 setting is possible, but then the footage just doesn't look that sharp.. (as I can't film in 60fps, I got the first GoPro 960).
    I installed Cineform and converted a little test video to AVI. This resulted in an export video without quality loss, but the conversion with Cineform took way too long for it to be a practical solution cause I edit a lot.
    At last, Abhishek Kapoor, I couldn't find the video setting you're talking about to increase the maximum bitrate.
    Any other ideas that might work?

  • HELP! iPhoto 08 Quality loss after edits

    HELP! iPhoto 08 Quality loss after edit!
    Any edited version, no matter how minor, causes the file size to be cut in half!
    Original 3872 x 2592 is 3.1mb at 300dpi .
    Edit version 3870x2590 becomes 1.5Mb at 72dpi.
    B&W conversion 3872x2592 becomes 1.6mb at 72dpi.
    Seems like a major degradation! iPhoto 6 wasn't this bad.
    DPI change is not a problem but the file size change sure is!
    PLEASE! any ideas before I upgrade all my files to 08. Please - don't say Aperture, it's still too slow and cumbersome. Trying to avoid Lightroom and stay within Apple sphere.

    It really isn't a big degradation. There is a jpg compression when you make any edit but you might be hard pressed to see the reduction unless you're enlarging/printing the file to very large sizes. The most critical part of an image file is the number of pixels in it.
    The reduction in size depends on the image content of the photos. If there's a lot of the same color, i.e. like lots of blue sky or a same color wall, that type of image will see much more compression than a very intricate photo. Also when removing the color information for a B/W conversion reduces the file size considerably. Do a Google search for jpeg compression and you'll find some very informative descriptions on how the compression is performed and what part image detail plays in the resulting file size.
    You would have to compress the file a number of additional times time before you'd see the change. And with iPhoto's Revert to Original capability, you can start a new edit fresh with the untouched digital negative.
    Do you Twango?
    TIP: For insurance against the iPhoto database corruption that many users have experienced I recommend making a backup copy of the Library6.iPhoto database file and keep it current. If problems crop up where iPhoto suddenly can't see any photos or thinks there are no photos in the library, replacing the working Library6.iPhoto file with the backup will often get the library back. By keeping it current I mean backup after each import and/or any serious editing or work on books, slideshows, calendars, cards, etc. That insures that if a problem pops up and you do need to replace the database file, you'll retain all those efforts. It doesn't take long to make the backup and it's good insurance.
    I've written an Automator workflow application (requires Tiger), iPhoto dB File Backup, that will copy the selected Library6.iPhoto file from your iPhoto Library folder to the Pictures folder, replacing any previous version of it. It's compatible with iPhoto 08 libraries. You can download it at Toad's Cellar. Be sure to read the Read Me pdf file.

  • Another quality loss issue: exporting

    I see a lot of people have problems with quality loss.
    I am importing an movie of an animated screengrab (using Snapzpro). This movie looks great - nice and sharp when viewed in QT. After importing into iMovie it's slightly blurred, notr a big deal just looks a bit "warm".
    However when I export it looks bad, diagonal lines are very jagged. I've tried export at Full quality, I've tried expert settings with DV-PAL and many other codecs.
    It's just about OK if I use "none", and then import into QT Pro and export with DV-PAL - what I don't understand is why I can't just use DV-PAL direct from iMovie.
    Is this something I just have to put up with? Would it better with Final Cut Express?

    Actually I discovered since posting the question, that the dimension is something to due with it, but too small rather than too large. I was capturing at 640 x 480 and I discovered that capturing 768 x 576.
    I also think that the nature of the image is crucial. This is large scale musical notation - lots of diagonal black and white straight lines so any jaggedness becomes very obvious.
    What I still don't understand is why the export from iMovie using DV PAL is not as good as the export from QT using DV PAL - I have to export from iMovie with no compression, then re export from QT Pro.
    Although I,m totally ready to accept this is a human operator error, I've also seen lots of people say iMovie does degrade on importing which is why I wonder if I need final Cut Express or Pro

  • Photo quality change after exporting

    Hello
    I'm working on a short film project that should be made from photos not videos (so photos are critical in this iMovie project), but after exporting the movie ( in HD) I found out that the photos' quality were reduced?
    Most of the photos are darky, with dark backgrounds, they look good enough in iMovie but after exporting they look lighted up, which ruins my movie.
    What should I do??
    Thanks in advance

    That is odd, I have not been aware of any drop in camera quality via an update with this model. With this being the case I would advise running the update again and choosing the "Repair" option.
    What are your thoughts about this forum? Let us know by doing this short survey.
     - Official Sony Xperia Support Staff
    If you're new to our forums make sure that you have read our Discussion guidelines.
    If you want to get in touch with the local support team for your country please visit our contact page.

  • After exporting finished movie project, one clip is gone but all others are visabel

    I hope someone can help me out. After importaing my movie project from iMovie into FCPX I made some changes to the project and was able to exported it. After exporting, all clips we visable with the expection of one.  How can I fix this? The original event is in my list so I have no clue what is going on.

    File>Relink Event Files.

  • Quality loss when exporting footage from 650D

    Hi there! I just got back from Nicaragua where I shot a wedding for a friend of mine. I just started using FCE (used Pro in college) and noticed that after importing my clips from my Canon T4i (650D) the clips would constantly need rerendering if I changed anything that normally wouldn't require a render.
    The main issue is that after exporting the video, it's a 21.6 GB file that is pixelated and a major downgrade from the actual files themselves. I've also noticed that when I play around with the setting, the video size says it's currently at 597 x 498. Is there any way to fix this issue without having to reedit? If not, how can I avoid this in the future?
    Thank you in advance.

    Honestly, FCE is not the best app to edit video recorded on DSLRs.
    If you want to edit the material with it, you must first convert the files from their Canon native format to AIC before you bring them into FCE.
    If you decide to change apps, look into either Premiere Pro if you want to stay with an editing paradigm that is familier or go with Final Cut X if you want to work within the iMovie paradigm.
    Good luck,
    x

  • Quality loss after swf export problem

    Dear all,
    Thank you for reviewing this. First I would like to mention that I am a newbie with illustrator. So my knowledge is very limited. My problem is I have some vector files. they look like this
    Now I need to export them in swf format. I am using the given presets.
    The problem is I am getting output something like this. not sure where I am taking the wrong turn. Anyone can help will be forever grateful!!

    You'll need to do some research and try out the possiblities to get the long shadows into Flash
    I think that Flash should be able to have a transparent gradient and Multiply blend mode.
    In case you created the shadow using a blend or the transform effect, you might be out of luck and need to recreate it.
    Try the plugin opo.
    opo - Quick Start Guide

  • Major quality loss after disc build/compile

    All of my mpeg videos were hardware encoded on a Sonic SD-2000... looks great when i play it in quicktime and in the playback window of DVDSP, but after I build the disc and load it in Apple DVD player, there is a dramatic loss in quality. A lot of compression is visible with a strange pulsing to it. I know the compile shouldn't cause this to happen... but it is!
    has anyone had any experience with this?

    I'm playing it actual size. On a set top player/ntsc tv it looks great... but on my computer the image seems to be brighter & there is a lot of visible compression. I'd like to think it's just my computer, but when I software encode this doesn't happen. I've opened the hardware encoded mpegs in VLC, Mplayer & Quicktime & they look great. They also look good in the DVDSP simulator.
    I've tried deleting my disc build files & parsing files & rebuilding with no luck.

  • IMovie sound quality changes after export and is terrible

    when i export my imovie the sound quality becomes bad and sounds like my speakers are blown but their not, it sounds perfectly fine in imovie but after its exported it changes to worse, anyone know how to fix this?

    Check your audio levels. and if necessary, reduce the levels so that the audio stays under the 0 DB line. If you have audio that is yellow or red, reduce the level. This video shows an example of how to do this. Click on the video All New Audio Editing."
    http://www.apple.com/ilife/video-showcase/

  • Quality loss when exporting to quicktime (no conversion)

    i'm trying to export a fully rendered project in final cut pro (6.0.2).
    i'm using the option i always used:
    "export -> quicktime movie..." (not "using quicktime conversion")
    the idea was to convert the movie later to h.264 (using the quicktime pro player).
    normally this always gave me a quicktime movie with ± the same quality as when played directly in final cut.
    no difference whether exporting as self-contained movie or referenced movie (besides the result file size of course).
    only, now it's different, see here (quicktime player left, final cut right):
    the text (done using LiveType) is displayed in completely unusable quality. (difference in color etc. doesn't bother me right now)
    where does that come from? in final cut i don't see this rendered quality anywhere...
    i also tried:
    deleting the render cache, rendering the project again, no difference
    export -> quicktime movie, "self-contained" or referenced movie, no difference in quality.
    i didn't have this problem with the same project some months ago. back then i probably wasn't running 10.4.11 and quicktime 7.4.1.
    any idea what to try?

    There is no quality lost.
    The default of QuickTime player when showing DV is to display 1 field and double height the image. This is to avoid interlace combing on the non-interlaced computer display.
    IF you type cmd-j and bring up the info for your clip, thusly:
    In the lower right corner you'll notice the High Quality flag:
    Setting it will take you from this:
    to this:
    Alternatively, you can go into the QuickTime Player preferences and set the default there:
    Make sense?
    Patrick

  • Image Quality loss when exporting to compressor's MPEG-2

    Hello peeps.
    My issue is that once I've finished my ridiculous 1 hr (anaorphic) edit with FCP I wish to put it onto DVD (4.7GB) and have choosen 90min best etc on compressor but when I come to view the footage again from the newly created file it looks like someone's gone to it with a knife around the edges.
    Does all the footage need to be de-interlaced? Surely not.
    It seems to mostly effect any movement within the screen.
    Yet as a quicktime file it looks fine but that happens to be over 10GB and thus will not fit onto a normal DVD.

    What are you viewing it on...the computer monitor? Are you simply opening the M2V file and playing it on the computer? If it's interlaced material, you're probably seeing the jaggies that can happen when a progressive display is showing a raw interlaced image without deinterlacing it for playback like some programs do automatically. If this is so, burn your DVD and watch it on a TV or NTSC/PAL Monitor, and check to see if it's still funky. Chances are it will be fine, otherwise, you may have something going on with incorrect field rendering somewhere along the line.

  • Quality loss in Imovie after finalizing

    Having read alot about codecs and converting i'm still not able to figure out why there's quality loss after finalizing my project in Imovie. In the original .MTS files I can see, when played with the VLC player there's a little noise in the grey and dark area's but it's more then acceptable. After converting and finalizing it's a horror to watch. The weird thing is that the converted .MTS into .MOV files look better when played in Miro then in Quicktime.
    What advice can you give me on reducing the noise and making sure the movie looks best when played from a DVD on flatscreen? I want to do the editing in the higest possible quality because in the future I want to burn to BluRay aswell (I know that full HD is only possible when you burn to BluRay)
    Here are the details:
    1. I imported the material, filmed in 25P (so I don't have to interlace) directly from my canon HF200 into Imovie. I can choose between 960X540 or original size.
    2. I choose original size and receive a warning that this can cause a negative effect on the quality. So maybe the problem is caused by my old and small laptop, see specifications underneath my questions.
    3. The converted mov. files in Imovie appear to have more noise then the original and after finalizing to HD 1080p the noise in the grey and black areas is almost unwatchable.   
    Is there anything I can do besides buy a new laptop?
    Thank you for your help!
    Specs Mac
    Modelnaam:          MacBook
      Modelaanduiding:          MacBook4,1
      Processornaam:          Intel Core 2 Duo
      Processorsnelheid:          2,1 GHz
      Aantal processors:          1
      Totaal aantal cores:          2
      L2-cache:          3 MB
      Geheugen:          4 GB
      Bussnelheid:          800 MHz
      Opstart-ROM-versie:          MB41.00C1.B00
      SMC-versie (systeem):          1.31f1
    Intel GMA X3100:
      Chipsetmodel:          GMA X3100
      Type:          GPU
      Bus:          Ingebouwd
      VRAM (totaal):          144 MB
      Fabrikant:          Intel (0x8086)
      Apparaatcode:          0x2a02
      Revisiecode:          0x0003
      Beeldschermen:
    Kleuren-LCD:
      Resolutie:          1280 x 800
      Pixeldiepte:          32-bits kleur (ARGB8888)
      Hoofdbeeldscherm:          Ja
      Synchrone weergave:          Uit
      Online:          Ja
      Ingebouwd:          Ja

    No worries Still your remark about the external drive is someting to take in to account, i have mine hooked on most of the time.

  • HDV sequence has green lines and pink dots after export

    I digitized some HDV footage from a Sony HVR-VIU into Final cut Pro 7. Everything worked normally through the edit. After exporting the sequence as a quicktime movie, it played back fine as a quicktime. When I attempted to convert it to a media file in Sorenson Squeeze, the file showed up with green lines and pink dots over the picture. To test it differently, I dropped the file into IDVD. Same, result in playback. I've never seen anything like this before, any ideas?

    Brad your article was extremely helpful in getting my sequence to work for a DVD. However, I've had success before using the same camera, format, etc., in making DVD's from an HDV sequence, and I'm curious as to what I did wrong this time. The most confusing part to me is that the original quicktime self-contained export played fine through quicktime, but got funky when placed into IDVD and Sorenson's Squeeze compressor. I must have done something wrong up front in digitizing or making settings in FCP, and I'd like to know what it was so I don't do it in the future. Thanks.

  • Huge quality loss in iMove '11

    Hello fellow iMovie users.
    Yesterday I upgraded to iLife 11 to get the new iMovie and its "new" audio editing capabilities. I could ofcourse just buy it from Mac App Store, but I am principally against App Store and its strict rules, so I choosed to get it the old way.
    Anyway, I liked what i saw. Finally the new iMovie was about as good as the five year old one, and had some neat features like chroma key and cropping.
    So I decided to start practicing and create a short video based on some old DV-videos filmed with my Canon MV950 DV-PAL camera.
    I imported the footage into iMovie, and noticed some significant quality loss after the import.
    And it get worse. After I exported the video, it seems like it is heavily compressed, even if I'm exporting to QuickTime and selects the highest quality possible.
    I have some screenshots to show you the differences.
    This is the original DV-footage.
    The imported video. Notice the higher compression and the choppy edges.
    And this is the exported video. Notice the insanely bad quality, especially in dark areas.
    Is there any way to fix this, or do I have go back to iMovie HD?
    PS. Sorry if my post is a bit unreadable. I'm from Norway.

    Steve,
    While I agree everyone should have owned a HD camera by now, there are a lot of low-end SD cameras that are still being sold today. In this era of our economy, consumers are sensitive to prices; especially low or lower prices.
    And unlike the video camcorder boom of the 80s with Sony introducing the Video8 handycam (shoulder mounted camcorder), people today do not video using traditional camcorders. Most either do it through a digital camera, DSLR, iPhone or blogger cameras and are already mostly in an acceptable progressive format. There is nothing wrong with DV style cam. Canon GL-2 and the Panasonic DVX-100 are still commanding such a very high price tag for cameras of older technology and still being repaired goes to show that there are people out there still using it.
    If one can convert quality interlaced footage into quality progressive footage, you can use that footage and create good results using iMovie 11. I agree with you and Tom that iMovie 11 captures interlaced footage in full. But what's the use if it can't make a good product in the end that looks like what iMovie 6HD can do and when there are PC software out there including the free Windows Movie Maker that can do this with no problem.
    Consumers, unlike some of us, only relate to past software used and are usually benign to the fact of progressive vs interlaced. I have dealt with some mis-informed customers that they believed FULL HD only means 1080p at 60fps; anything else is not. I digress.
    With Mac users, they don't necessarily follow the same upgrade frequency as PC users either. Macs generally last a lot longer between upgrades compared to a PC because they don't have to run a barage of virus/spam/anti-malware growing definition files which ultimately slow an otherwise healthy PC down. Macs do not have to worry about this.

Maybe you are looking for