Quality lot clearance

Hi SAP GURU
I have punched one finish good production. The non availability of quality plan it went to CRTD mode. now I have created the QPlan and wanted to assign this plan in already punched lot to convert in REL mode.
But when I clicking on Tasklist v Spec tab through QA02. System is not reading the data.
The system status for material is  CRTD CHCR SPRQ and User Status is IMAT.
Pl. let me know how I can changed these status.
regards
LBY

Hi,
Pl. check whether you have made Inspection Plan in QP01 with proper Usage i.e. it should be FG GRN Inspection. And also check it should be valid from the date of Inspection lot.
Then go to QA02 ---> for your inspection lot go to Inspection specifications tab & click on Task list/spec. so your inspection plan will be copied under Assigned specifications.
Check & revert for the same if any issue.
Regards,
Tejas

Similar Messages

  • Qm Automatic Inspection lot clearance

    Dear All,
    My client have one requirement.
    For the self certified vendors they want to go for automatic lot clearance.
    that is lot should be created and wait in quality inspection for some
    defined time and the should be cleared automatically without any manual
    intervention. 
    If this is possible with DMR.
    kindly shown me the possibility with screenshots.
    Thanking you,
    S.Thanigai

    Hi selvam s ,
                       As per my understanding for such materials in the material master QM -view in the inspection setup...........for the inspection type -01 (Goods receipt insp. for purchase order) <b>uncheck</b> the check box post to inspection stock ......then the inspection lot will not be created on GR & the stock will be moved to unrestricted use directly......
    Please let me know if you have any further query regarding this........
    Please <u>reward points</u> if the ans is helpful..............
    Thanks
    Kaushik

  • Quality lot not getiing generated

    Hi
    If  QUALITY PLAN  is assigned to any material then it should appear in QA32 that is quality lot must be created.The problem is such that during starting of new period i.e. every month starting Inspection lot is not getting genrated for already asssigned Quality Plan materials.The problem gets normal after 4 -5 days after the month start.
    Please suggest any solution
    Regards
    Pallab
    +91 9960331816,Pune

    Hi Anup,
    The thing is like that we generally maintain qulaity plan to any inprocess/incomming material.Now for the entire month the in process material after productuion order confirmation will get appear in QA32 then results recording is done then UD.
    Now in the starting of every mionth when new periods opens for couple of days the in process material give errors that inspection plan is not maintained.Where as these are those materials which responded Ok in the last month with inspection
    plan maintained.Also after couple days of starting of the month things become normal
    Regards
    Pallab
    +91 9960331816(Pune)

  • Quality management - can I change description of quality lot after UD ?

    Quality management - can I change description of quality lot after Usage Decision ?

    Hi,
    Try in transaction QA12 to change the usage decision & then try to change to description of the lot.
    Regards,
    Prashant

  • Quality lot creation for operation description

    Dear All
    My client requirement is like this
    we are creating the production order in that operations are external operations for which automatic purchase requisition is created with respect to the operation description(i.e. without material) using account assignment catagory F. now my requirement is after doing GR quality lot has to be created with respect to Purchase order and we can able to give the usage decision for that lot and post
    Regards
    Shafi

    HI
    If you are not using any material then for which one you want to make inspection lot? and for which you will make RR and UD?
    i think only at material level QM can be activated thru QM view.
    Plz check at your end
    Regards
    Anupam Sharma

  • Quality Lot creation against

    Hi,
    I need to create an inspection lot against GR w.r.t Reservation.
    Is that possible and what would be the appropriate inspection type in that case.
    Regards,
    Amlan C

    I am trying to feasibility of the below process:
    Goods issue needs to happen against Reservation 261. MB21
    While Goods issue the Shop floor person needs to return the defective part to store.
    Store will update the receipt using MIGO against reservation.
    Since the part that is returned to the stores is damaged, the GR needs to be under quality inspection.
    Maintenance will take the necessary corrective measures and move the qty to unrestricted.
    My only CONCERN is will G.R against reservation create a quality lot. What kind of inspection type needs to be used for GR against Reservation?
    Regards
    Amlan C

  • Quality lot generation through PI sheet

    Hi,
    I have the following requirement:
    In the PI sheet I need to confirm an operation and which in turn would generate a inprocess inspection lot. In that lot I need to do a result recording. Every step is to be carried out through PI sheet. Can anybody give me any idea on how should I approach? Is there any standard process instruction category (I could not find one that would work in this situation.. may be I am missing something).
    Thanks in advance!!
    Snigdho

    Hi,
    There are some SAP standard process instruction categories, which you can use if it meets your requiements. These are like characteristics based instructions where you give the values. If not you can create the Process Instructions Categories of your own with your own required characteristics.
    Otherwise the Process instructions can be of Text type also.
    The other way is to define your PI by Xsteps.

  • Quality lot creation

    Hi
    In production order.. 3 operation are there...generally when production order has done GR ... Inspection lot has created..
    but here i want inspection lot created..at the time of  2nd opearation conformed/released...(inspection lot creation automatically at operation level)...is it possible.. any one could  guide me .. about this  issue..
    regards
    sesidhar

    Hi,
    If you are talking about 03 type inspection then it is not generated at the time of GR (3rd operation) but it is generated at the time of Order Release.
    Now if you are talking about 04 (Receipt against production order) then in general this type of inspection lot is generated at the time of GR, but if you want to create this inspection lot earlier before Goods Receipt then you have option of early Lot creation.For this go to QM view of Material Master and in Inspcetion type view select Inspection type 04.
    And select option Y Early Lot creation at Control Inspection Lot.
    This will generates the inspection lot at the time of order release (not at specific Operation) along with 03 inspection lot.
    Regards,
    Dhaval

  • Quality Lot Creation during various stock movements

    I am unable to trigger a quality inspection when moving the material from unrestricted use to project-unrestricted [412Q] or from project-unrestricted to different project-unrestricted [415Q]. Can anybody help me in this regard? Also how do i trigger a quality inspection before and after a service order to check the material quality? note: [] contains movement type.

    543 Consumption from stock of material provided to vendor
    This movement cannot be entered manually.
    The consumption of components for a subcontract order is posted using goods receipt for purchase order (101). It can be corrected by means of a subsequent adjustment.
    Possible special stock indicators: E, Q.
    For the special stock indicators E and Q, you must ensure that the quantity is not removed from the stock of material provided to vendor, but from the unrestricted-use sales order or project stock.
    545 Goods receipt from by-product from subcontracting
    If a component is entered with a negative quantity for the subcontract order, the receipt of the by-product is posted during goods receipt for purchase order or during the subsequent adjustment.
    Possible special stock indicators: E, Q
    For special stock indicators E and Q, you must ensure that the quantity is not posted to the stock of material provided to vendor, but to the unrestricted-use sales order or project stock.
    551 Scrapping from unrestricted-use stock
    553 Scrapping from stock in quality inspection
    555 Scrapping from blocked stock
    Possible special stock indicators: E, K, Q
    561 Initial entry of stock - unrestricted-use stock
    563 Initial entry of stock - quality inspection
    564 Initial entry of stock - blocked stock
    During initial entry of stock balances, you enter the physical warehouse stock frigures or the book inventory from your old system into the SAP System for productive operation. This data entry usually takes place by means of batch input.
    Possible special stock indicators: E, K, M, O, Q, V, W (565: only E, K, Q)

  • Restrict for invoice verification up to Quality accept

    Hi,
    My Scenario 
    Po qty is 100   and i am doing Goods Receipt 100 qty  after posting inspection Lot is creating
    But here If i gone to Invoice verification it is accepting without Quality lot clearing
    i want to Restrict for invoice verification up to Quality accept 
    after  accepting quality only it should go for invoice
    it is possible ??????
    Manjunath

    Hi
    yes possible ,check following link
    [MIRO before Quality lot clearance;
    Regards
    kailas Ugale

  • No inspection lot can be opened for this material and vendor -QA228

    Hi every one !
    Iam  getting  Error while doing Migo -"No inspection lot can be opened for this material and vendor-QA228"
    we analyze the issue asfollow -
    1.checked Quality Lot-Available
    2.Quality info record- Availble
    3. Quality plan is exist.
    But stil throwing  above Error.

    Hi,
    Check the below threads,
    [No inspection lot can be opened for this material and vendor;
    [No inspection lot can be opened for this material and vendor;

  • How to perform stock posting for a manually created lot?

    Dear Friends
    I have a material A for which GRN is made before the inspection type 01 is activated in material master. thus no quality lot is created for the material in qa32.But the material has got an inspection plan
    But for 240 units of material, we will have to show in sap that 120 pc is rejected and sent to rejection storage and rest are ok and thus should be sent to ok storage location with 321 mt.
    Thus i have created a manual lot in qa01. this lot can be found in qa32. I did result recording for the same. but i am not finding stock posting tab page in UD. please tell me how do I post stock in case?
    Thanks
    Chandra

    Hi
    120 pc is rejected and sent to rejection storage and rest are ok and thus should be sent to ok
    Stock posting is not possible for manual generated lot.
    What you can do you can only post/Create Manual Lot only for  OK Qty.
    Rejected Qty 120 you can do Return delivery through Unrestricted after GR is made(after 101 mvt)
    This is only solution.
    or
    Cancel original GR.
    Activate 01 inspection.
    Do GR again
    I hope this will help you
    Regards
    Sujit

  • In process quality inspection in operation of a process order

    Hi,
    PP-PI inprocess quality inspection at operation level
    I am creating a process order having two operation. the first is quality inspection (inprocess inspection) & last is related to consumption of some materials.
    The control key in operations are pi02,pi03(miles stone confirmation). i am using insp type 03 in material master 
    user needs  insp. happen first then consumption of material.
    my question is
    1.when operation first get triggered  quality lot generated i enter RR & do UD.but here i can not see the insp lot stock as subscreen. why? then how can i block defect qty in block stock?
    2.how can i consume material in the same quality operation? 
    With Regards,
    Kareena

    Hi Kareena,
    I think the thread is going in other direction. You were asking for some solution to mentioned the consumption.............
    That can be taken care..........
    For 03 - "In process inspection" lot as yield confirmation by activating the STD function of SAP as I have mentioned in my last post.
    For 04 - "Inspection against GR form Production" lot, by stock posting.
    For any lot you can do customization in "EXIT_SAPLQEEM_011", to post the material consumption at each MIC/Operation valuation.
    But now the entire scenario what you are asking is bit confusing.
    You wrote
    I think for process order,
    quality activity confirmation we are talking
    & for this i have not maintained inspection
    point or inspection point identification.
    i am doing RR from qe11.
    It seems you we are talking about 03 type inspection lot. that you can relate with the option I have mentioned in the beginning of this reply.
    in my inspection plan for the material
    i have maintained 5 different characterstics
    in that row i can not see the sampling
    procedure,base unit of measure,
    base quantity all these field are gray in color
    i have defined sampling procedure also
    i have not maintained inspection point identification.
    Where you have mentioned these 5MICs?
    If it is inspection plan, then it will go with 04 Type.
    If it is Master Recipe/Routing, then it will go with 03 Type.
    Now the other point you wrote the MIC Line item have the fields GREY for Sampling Procedure,&...........&.......So to activate them,
    Select the line item for MIC, click on the Control Indicator (Sampling Procedure) and then you will be able to assign the Sampling Procedure to MIC.
    The fields "Inspect" & "Inspected" are related with the "Insp. Scope" with the MIC. The scope is define at the Control indicators for the MICs (On Page2 for the Indicators). There are four Radio Buttons to define the Inspection Scope.
    Scope not Fixed
    If you set this indicator, the number of inspected units is defined by the user for results recording.
    This number does not have to agree with the precalculated number of inspected units.
    E.g. If the the sample size for that particular MIC is not fixed ever and you will supposed to enter it at the time of RR you should define this indicator and the field will open for entry in QE11.
    Fixed Scope
    If you set this indicator, the number of inspected units must correspond
    to the precalculated number of units to be inspected for results
    recording.
    The system can perform a valuation for the inspection characteristic based on the number of nonconforming units or the number of defects in the sample.
    And the field will be GREY, non - modifiable.
    Similarly the larger and smaller scopes work.
    Best Regards,
    Shyamal

  • Inspection lot not updated with Task list and sample

    Hi,
    I have created a quality plant and assigned the MICs. When I am trying to Process the quality lot which is created automatically through QA32, I got an error, ,No inspection plan could be found'
    When i create an inspection lot system is picking up the Task list and picking up the Sample size.
    Please provide some light on this.

    Hello Kumar,
    Check each and every point given in below document and come up with your observations.
    I presume Inspection lot status consists CRTD.
    Inspection lots with CRTD status- Causes and Remedies - Product Lifecycle Management - SCN Wiki
    Amol.

  • Goods movement with Inspection Lot

    Hi
    We would like to do a Material to Material posting including the earlier created inspection lots for the initial material?
    Is it possible in QM to transfer /link an inspection lot with batch from one material to another material?
    Ex: one material has inspection stock with assigned inspection lot/batch. we would like transfer posting this stock to other material. Is it possible by transfer the inspection lot from one material to other material with inspection lot/Batch?

    Hi,
    We can trasfer the stcok from one material to another material from Quality lot itself , but we cannot assign one lot to two materials. If you want inspection lot in receiving plant then activate 08 inspection type in Material Master and maintain inspection settings for 331 M.Type in SPRO.
    Regards,
    Vikas.

Maybe you are looking for