Quality management Data Source
Hi,
Can anyone tell me in Quality Management, How can i find, from which table data is coming and what are all the Selection Restrictions put in the Datasource Level.
Regards,
Meiy
Transaction data is taken from the posting of a notification and then into the update queue it does not come from a table
If you want to see where notifications eventually end up - check QMEL/QMFE
Similar Messages
-
ERROR [IM002] [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified in windows server 2008 r2.I made a application in asp.net c#.I am using ODBC connection.When I deployed my application in windows server2008 r2.There
is no Microsoft ODBC driver shown in ODBC Data source administrator.Then I go to the C:\Windows\SysWOW64 and open Odbcad32.exe and add Microsoft ODBC2 driver for Oracle and when I run my application I got following error
ERROR [IM002] [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified
I am using follwoing string
<connectionStrings>
<add name="theconnetion" connectionString="DSN=abdb;UID=abc;PWD=xyz"/>
</connectionStrings>
Guide me What I do?Did you add a System DSN or a User DSN? If you added a User DSN from your own login, the asp.net application will not be able to use it unless its application Pool in IIS is configured to run under the same credentials that you used for creating
the DSN. It's better if you add a System DSN.
Also, be careful to ensure that you are using a 64 bit DSN, unless you configure the application to run in 32 bits. If the 64 bit application attempts to use the 32 bit driver you get the same error message "Data source name not found and no default
driver specified". See this KB article:
http://support.microsoft.com/kb/942976/en-us -
Hey everyone, So I am trying to get a report onto the server, and in BIDS I kept getting a login screen repeating over and over when I tried to deploy my report, so I tried to upload the file at http://<servername>/Reports This worked, but then trying
to run this report from http://<servername>/Reports did not work either because "An error has occurred during report processing. (rsProcessingAborted) Cannot create a connection to data source 'FTYDataSource'. (rsErrorOpeningConnection) For more information
about this error navigate to the report server on the local server machine, or enable remote errors" Anyways I tried to add a New Data Source (which I would use in the report) at http://<servername>/Reports, type ODBC, with the connection string Dsn=blah_blahblah.
I try to test the connection here and get the error ERROR [IM002] [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified This is really getting old fast, everything I try, a new error comes up. Granted I am new at this,
but this still should not be this troublesome. Does anyone have any ideas on what could FINALLY allow me to just put a report out onto the server?!? THANK YOU in advance for ANY help.Hi,
Please try setting the credentials of the datasource.
1. Double click and open the datasource in your project.
2. Click on the credentials tab, and click on option button 'Use this username and password'
3. Enter the username and password to connect to the datasource
4. Deploy or upload the datasource to the report server and try accessing the reports.
Hope this helps.
Please click "Mark as Answer" if this resolves your problem or "Vote as Helpful" if you find it helpful.
BH -
Hi I have SQL2012 installed on my local machine and have also installed MySQL 5.6.23 installed with a test database.
I also have my SQL connector installed and MYSQL ODBC Driver 3.51.
Which happily connects to the Mysqldb.
The Datasource Name : mySQL conn
TCP/IP Server : localhost and Port :3306
User root
with pwd
On the SQL side I have used the following
EXEC master.dbo.sp_addlinkedserver
@server = N'MYSQLSRV',
@srvproduct=N'mySQL conn',
@provider=N'MSDASQL',
@datasrc=N'mySQL conn'
However when I try to selet using open query
SELECT * FROM OPENQUERY ( [MYSQLSRV], 'SELECT * FROM students' )
it comes back with
OLE DB provider "MSDASQL" for linked server "MYSQLSRV" returned message "[Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified".
Msg 7303, Level 16, State 1, Line 1
Cannot initialize the data source object of OLE DB provider "MSDASQL" for linked server "MYSQLSRV".
I cant understand what I have done wrong . Any help in this would be great as Ive hit a bit of a brick wallHi Robert3975,
In addition to other post, please also note the following things.
1. If you use the 32-bit driver on a 64-bit machine, please run the 32bit version of "odbcad32.exe" by running "c:\Windows\SysWOW64\odbcad32.exe"
from Start/Run menu and
create your ODBC DSN. However, for the 64-bit driver, use c:\windows\system32\odbcad32.exe to create your ODBC DSN. For more details, please review this similar
thread.
2. Expand the folder Providers under Linked server directory in SSMS and go to properties of MSDASQL provider and configure it properly as described in this blog:
Creating Linked server to MYSQL from SQL Server.
Thanks,
Lydia Zhang
If you have any feedback on our support, please click
here.
Lydia Zhang
TechNet Community Support -
Hi,
I'm running
Red Hat Linux 5, MySQL and BOXI 3.1
I try and schedule a report in the CMC and the report fails with the error
A database error occured. The database error text is: {Driver Manager} Data source name not found, and no default driver specified. (WIS 10901)
I've went through the steps in the Bus Obj's Documentation outlining how to install the unixODBC (though this doco was for R2 - I'm not certain whether this install is needed for 3.1).
Error WIS 10901 details
Database error: . Contact your administrator or database supplier+
for more information. (WIS 10901)
The database that provides the data to this document has generated an error.
Cause
Details about the error are provided in the section of the message indicated
+by the field code: .
Contact your BusinessObjects administrator with the error message
Action
information or consult the documentation provided by the supplier of the
database.
Any pointers suggestions on how to set up correctly the unixODBC will be looked into.
Thanks for taking the time to view this post.
CheersHi again Aravind,
I hope you're not beginning to wish you had never answered that first question from me since it seems as if I'm now backing up the truck with regard to the entire question. If I'm asking too much from you let me know I don't wanna overstep the line with repect to what should and shouln't be asked in these forums'
anyway I looked in that env.sh script. It was huge (pity I can't attach the file, I've appended it but it makes these threads somewhat lengthy)
DEFAULT_ODBCFILE="$BOBJEDIR"defaultodbc.ini
export DEFAULT_ODBCFILE
+ODBC_HOME="$odbc"+
export ODBC_HOME
also
# setup the mysql env variables
if [ -d "$BOBJEDIR"/mysql ]; then
# mysql env variables
set up the odbc symlink to work around:*
The DataDirect SQL Server ODBC driver on UNIX will not function properly under a*
locale other than "en_US" due to strong dependencies on their locale files.*
MYSQL_UNIX_PORT="$BOBJEDIR"mysql/mysql.sock
export MYSQL_UNIX_PORT
We want to be able to source the config file multiple times.
fi
if [ -d "$BOBJEDIR"/tomcat ]; then
set the JAVA_OPTS for tomcat
I see what you were referring to earlier with
if [ -d "$ODBC_HOME/locale" ]; then
the javascript files are kept here
The machine name
The user name
MYLOCALE=`locale | grep LC_MESSAGES | sed -e 's|LC_MESSAGES="||g' -e 's|"$||g'`The default registry
if [ ! -d "$ODBC_HOME/locale/$MYLOCALE" ]; then
ln -s "$ODBC_HOME/locale/en_US" "$ODBC_HOME/locale/$MYLOCALE"
fi
fi
Again cheers for your help in this matter.
#!/bin/sh
BOBJEDIR="/home/eberwick/BO_3_1/bobje/"
export BOBJEDIR
BODIR="`dirname $BOBJEDIR`/"
export BODIR
DEFAULTFILE="$
check for existence of u flag, if it is there, turn it off.
Set a flag so we don't source the environment more than once
webi config file
ccm.config"
if [ -f "$DEFAULTFILE" ]; then
. "$DEFAULTFILE"
fi
. "${BOBJEDIR?}setup/modify_ko_locale.sh"
SOFTWARE=`uname -s`
OBJECT_MODEL=`grep Platform $BODIR/setup/ProductID.txt | awk '{print $4;}'`
[ -z "$OBJECT_MODEL" ] && OBJECT_MODEL=32
SOFTWAREPATH=`grep SoftwarePath $BODIR/setup/ProductID.txt | awk '{print $3;}'`
U_FLAG=0
if [ X"$SOFTWARE" = "XHP-UX" ]; then
unset the LANG so that we don't get the localized version of 'unlimited' if the localized system messages are installed.
raise the ulimits to max allowed
undo that bug workaround from above
figure out what architecture we're on
now that we're localized, deal with unknown architecture
we include English, as localization may have failed
set the JDK variable
if [ x`echo $- | grep "u"` != "x" ]; then
set +u
U_FLAG=1
fi
fi
if [ x"$BOBJE_ENV_SOURCED" = x ]; then
if [ -f "$setup/boconfig.cfg" ]; then
HKEY_LOCAL_MACHINE="$setup/boconfig.cfg"
export HKEY_LOCAL_MACHINE
fi
BOBJE_ENV_SOURCED="true"
export BOBJE_ENV_SOURCED
BOBJEVERSION="12.0"
export BOBJEVERSION
LANGWAS="$LANG"
unset LANG
LC_ALLWAS="$LC_ALL"
unset LC_ALL
ulimit -Sn `ulimit -Hn` # max file descriptors
ulimit -S -c `ulimit -H -c` # max core file size
ulimit -S -d `ulimit -H -d` # max data segment size
ulimit -S -f `ulimit -H -f` # max file size
ulimit -S -s `ulimit -H -s` # max stack
ulimit -S -t `ulimit -H -t` # max CPU time
LANG="$LANGWAS"; export LANG
unset LANGWAS
LC_ALL="$LC_ALLWAS"; export LC_ALL
unset LC_ALLWAS
case X"$SOFTWARE" in
XLinux) SOFTWARELC="linux"; SHAREDLIBSUFFIX=".so"; CB1LIBSUFFIX="${SHAREDLIBSUFFIX?}.12.0"; CB1SYMLINKLIBSUFFIX="${SHAREDLIBSUFFIX?}.12" ;;
XAIX) SOFTWARELC="aix"; SHAREDLIBSUFFIX=".so"; CB1LIBSUFFIX=".12.0${SHAREDLIBSUFFIX?}"; CB1SYMLINKLIBSUFFIX=".12${SHAREDLIBSUFFIX?}";;
XSunOS) SOFTWARELC="solaris"; SHAREDLIBSUFFIX=".so"; CB1LIBSUFFIX="${SHAREDLIBSUFFIX?}.12.0"; CB1SYMLINKLIBSUFFIX="${SHAREDLIBSUFFIX?}.12";;
XHP-UX)
SOFTWARELC="hpux";
if [ "$SOFTWAREPATH" = "hpux_ia64" ]; then
SHAREDLIBSUFFIX=".so";
else
SHAREDLIBSUFFIX=".sl";
fi
CB1LIBSUFFIX="${SHAREDLIBSUFFIX?}.12.0";
CB1SYMLINKLIBSUFFIX="${SHAREDLIBSUFFIX?}.12";;
esac
export SOFTWAREPATH
export SOFTWARE
export SHAREDLIBSUFFIX
export CB1LIBSUFFIX
export CB1SYMLINKLIBSUFFIX
if [ "$SOFTWAREPATH" = "" ]; then
echo "$UNKNOWNPLATFORM (unknown platform): $SOFTWARE"
exit 1
fi
if [ -d "$BOBJEDIR"/jdk ]; then
JAVA_HOME="$jdk"
export JAVA_HOME
fi
JAVA_OPTS="-d$OBJECT_MODEL -Dbobj.enterprise.home=$
fi
setting AAHOME here so when CAD starts the value is set
enterprise120 -Djava.awt.headless=true -Djava.net.preferIPv4Stack=false"
if [ "$SOFTWARE" = "AIX" -o "$SOFTWARE" = "SunOS" -o "$SOFTWARE" = "Linux" -o "$SOFTWARE" = "HP-UX" ]; then
JAVA_OPTS="$JAVA_OPTS -Xmx1024m -XX:MaxPermSize=256m"
fi
export JAVA_OPTS
if [ -d "$Dashboard_Analytics_120" ]; then
AAHOME="$Dashboard_Analytics_120"
export AAHOME
fi
WCSDIR="$enterprise120/$SOFTWAREPATH/wcs/"
export WCSDIR
WCSBINDIR="$bin/"
export WCSBINDIR
WCSCOMPONENTDIR="$components/"
export WCSCOMPONENTDIR
BINDIR="$enterprise120/$SOFTWAREPATH/"
export BINDIR
LIBDIR="$enterprise120/$SOFTWAREPATH/"
export LIBDIR
PLUGINDIR="$enterprise120/packages/"
export PLUGINDIR
PLUGINDIST="$enterprise120/$SOFTWAREPATH/plugins/"
export PLUGINDIST
LOGDIR="$append the new valuelogging/"
export LOGDIR
if [ x"$BOE_LOGGER_ENVIRONMENT" = x ]; then
BOE_LOGGER_ENVIRONMENT="-loggingPath $LOGDIR"
else
BOE_LOGGER_ENVIRONMENT="$BOE_LOGGER_ENVIRONMENT -loggingPath $LOGDIR"
fi
export BOE_LOGGER_ENVIRONMENT
SCRIPTDIR="$enterprise120/generic/"
export SCRIPTDIR
JAVASCRIPTDIR="$setup/jscripts/"
export JAVASCRIPTDIR
MACHINENAME=`uname -n`
export MACHINENAME
removeUTF8SpecificsForKorean
STRIPPEDMACHINENAME=`hostname | sed -e 's/\..*//'`
export STRIPPEDMACHINENAME
if [ x"$BOBJEUSERNAME" = x ]; then
BOBJEUSERNAME=`id | sed -e "s|).\$||" -e "s|^.(||" `
export BOBJEUSERNAME
fi
restoreUTF8SpecificsForKorean
DEFAULT_REGFILE="$BOBJEDIR"setup/.defaultreg
export DEFAULT_REGFILE
REGFILE="$BOBJEDIR"data/.bobj
export REGFILE
BOE_REGISTRYHOME="$REGFILE/registry"
export BOE_REGISTRYHOME
DEFAULT_ODBCFILE="$BOBJEDIR"defaultodbc.ini
export DEFAULT_ODBCFILE
ODBC_HOME="$odbc"
export ODBC_HOME
the PID file location
PIDDIR="$BOBJEDIR"serverpids
export PIDDIR
SQLRULEDIRECTORY="$LIBDIR"
export SQLRULEDIRECTORY
PATH="$BINDIR:$crpe/xvfb:$PATH"
export PATH
CRPEPATH="$enterprise120/$SOFTWAREPATH/crpe/"
export CRPEPATH
MWHOME="$mw/"
export MWHOME
BOBJEXVFBPATH="$xvfb/"
export BOBJEXVFBPATH
MWUSER_DIRECTORY="$once the crpe is in, we should exit if this file doesn't exist.
Uncomment this to turn off Xvfb security and allow connections from
everyone.
MW_XVFB_AC="1"
export MW_XVFB_AC
Use a seperate .Xauthority file. Comment out this line if you want
to use the user's .Xauthority file for storing the Xvfb authentication
tokens.
registry/"
export MWUSER_DIRECTORY
MWRT_MODE="professional"
export MWRT_MODE
MWREGISTRY=":$MWUSER_DIRECTORY/hklm_$
Mainwin can deadlock unless this is set
Prevents Mainwin from popping up dialogs in some situations, causing a deadlock
variables merged from RAS
XVFB Manager
Environment Variables:
MW_XVFB_EXE = Name of the Xvfb exe.
Default is 'Xvfb'.
MW_XVFB_DAEMON = Name of the XvfbDaemon exe.
Default is 'XvfbDaemon'.
MW_XVFB_DAEMON_PORT = Port number that Xvfb Daemon will listen too.
Default is 5222.
MW_XVFB_DAEMON_HOST = Host on which the XvfbDeamon is running.
Default is Local host.
MW_XVFB_DAEMON_XVFB = Number of Xvfb to run.
Default is '5'.
MW_XVFB_DAEMON_DISPLAY = Starting display number for Xvfb.
Default is '1'.
MW_XVFB_DAEMON_PROFILE = Path to the Security Profile for Xvfb.
Default is 'SecurityProfile'.
MW_XVFB_DAEMON_TRACE = Set to turn on tracing information.
Default is undefined.
MW_XVFB_DAEMON_DIE = Turn off the exit code if no more connections.
Default is undefined.
MW_XVFB_FONT = Locations from which to load font
By this symbol being defined, the checking for a current set display is disabled.
Set to turn on tracing info when defined. Default is undefined.
MW_XVFB_DAEMON_TRACE=defined
export MW_XVFB_DAEMON_TRACE
RAS Home
.bin"
export MWREGISTRY
MWCORE_PRIVATE_DATA="$MWUSER_DIRECTORY/core_data"
export MWCORE_PRIVATE_DATA
if [ -f "$MWHOME"setmwruntime ]; then
. "$MWHOME"setmwruntime
fi
MWNT_OLE_DOCS=true
export MWNT_OLE_DOCS
MWPRINTER_DPI=600
export MWPRINTER_DPI
MWVISUAL_CLASS="TrueColor"
export MWVISUAL_CLASS
if [ "$SOFTWAREPATH" = "hpux_ia64" ]; then
MWTHREAD_STACK="200000"
else
MWTHREAD_STACK="FA000"
fi
export MWTHREAD_STACK
MWFONT_DIR_PATH="$fonts/"
export MWFONT_DIR_PATH
MW_XVFB_DAEMON_FONT="$misc/"
export MW_XVFB_DAEMON_FONT
XAUTHORITY="$xvfb/.Xauthority"
export XAUTHORITY
MWDEBUG_LEVEL=0
export MWDEBUG_LEVEL
MWINVISIBLE_DISPLAY=1
export MWINVISIBLE_DISPLAY
MWNO_SIGCHLD_IGNORE=1
export MWNO_SIGCHLD_IGNORE
MWLOOK=motif
export MWLOOK
MW_XVFB_DAEMON_PROFILE="$BOBJEXVFBPATH/SecurityPolicy"
export MW_XVFB_DAEMON_PROFILE
MW_XVFB_DAEMON_IGNORE_DISPLAY="true"
export MW_XVFB_DAEMON_IGNORE_DISPLAY
if [ "$SOFTWARE" = "HP-UX" ]; then
MW_XVFB_DAEMON_XVFB=10
else
MW_XVFB_DAEMON_XVFB=5
fi
export MW_XVFB_DAEMON_XVFB
MWNO_FILE_LOCKING=true
export MWNO_FILE_LOCKING
MWNO_SIGNAL_CATCHING=true
export MWNO_SIGNAL_CATCHING
RASHOME="$enterprise120/$SOFTWAREPATH/ras/"
export RASHOME
LIBRARYPATH="$LIBDIR:$WCSCOMPONENTDIR:$PLUGINDIST/auth/secEnterprise:$enterprise120/$SOFTWAREPATH/crpe:$:$PLUGINDIST/desktop/CrystalEnterprise.Report:$enterprise120/$SOFTWAREPATH/ras:$
May optionally be set to MALLOCMULTIHEAP=heaps:n[,considersize]
where n is scaled to the number of CPUs (usually 2x).
Setting to MALLOCMULTIHEAP=1 enables system defaults.
setting MALLOCMULTIHEAP to 'considersize' fixes an AIX memory leak and significantly reduces the memory footprint.
env variable to fix the default cpu affinity
env variable to fix dlopen/dlclose behaviour to be more like ELF-based systems
aix thread stack overflow guarding : won't catch if overflow is more than 4k, but better than nothing
aix specific ulimit changes
unset the LANG so that we don't get the localized version of 'unlimited' if the localized system messages are installed.
undo that bug workaround from above
set the aix thread scope to system (1:1)
better core naming for aix 5
Check if memory windows is enabled in the kernal parameters
We will support memory windows, either through the "BOE120_HP_MEMWIN_ID" environment variable,
or through the "BusinessObjectsEnterprise120" memory window key in /etc/services.window
Use memory windows if available on HP-UX.
For both HPUX Itanium and PA-RISC
Reduce the number of arenas from 8 (default) to 1 (min) which solves memory blowup issue.
Enable the thread local cache to compensate.
http://www.docs.hp.com/en/B2355-60130/malloc.3C.html
mysql/lib"
if [ "$SOFTWARE" = "AIX" ]; then
LIBPATH="$LIBRARYPATH:$LIBPATH"
export LIBPATH
if [ x"$MALLOCMULTIHEAP" = x ]; then
CRConfig env variable for DCP
MALLOCMULTIHEAP="considersize"
export MALLOCMULTIHEAP
fi
RT_GRQ=ON
export RT_GRQ
LDR_CNTRL=IGNOREUNLOAD
export LDR_CNTRL
AIXTHREAD_GUARDPAGES=1
export AIXTHREAD_GUARDPAGES
LANGWAS="$LANG"
unset LANG
LC_ALLWAS="$LC_ALL"
unset LC_ALL
ulimit -S -m `ulimit -H -m` # max memory
LANG="$LANGWAS"; export LANG
unset LANGWAS
LC_ALL="$LC_ALLWAS"; export LC_ALL
unset LC_ALLWAS
AIXTHREAD_SCOPE="S"
export AIXTHREAD_SCOPE
Version=`uname -v`
Release=`uname -r`
if [ "$Version" -gt 4 ]; then
CORE_NAMING=ON
export CORE_NAMING
fi
AIXTHREAD_MUTEX_DEBUG=OFF
export AIXTHREAD_MUTEX_DEBUG
AIXTHREAD_COND_DEBUG=OFF
export AIXTHREAD_COND_DEBUG
AIXTHREAD_RWLOCK_DEBUG=OFF
export AIXTHREAD_RWLOCK_DEBUG
elif [ "$SOFTWARE" = "HP-UX" ]; then
if [ "$SOFTWAREPATH" = "hpux_ia64" ]; then
SHLIB_PATH="$LIBRARYPATH:$SHLIB_PATH:$JAVA_HOME/jre/lib/IA64W.0/server"
else
SHLIB_PATH="$LIBRARYPATH:$SHLIB_PATH:$JAVA_HOME/jre/lib/PA_RISC2.0/server"
fi
export SHLIB_PATH
MAX_MEM_WINDOW=`/usr/sbin/kctune | grep max_mem_window | awk '{print $2}'`
if [[ "$MAX_MEM_WINDOW" != "0" ]]; then
if [[ "$BOE120_HP_MEMWIN_ID" = "" && -r "/etc/services.window" && -x "/usr/bin/getmemwindow" ]]; then
BOE120_HP_MEMWIN_ID="`/usr/bin/getmemwindow BusinessObjectsEnterprise120`"
export BOE120_HP_MEMWIN_ID
fi
if [[ -x "/usr/bin/setmemwindow" ]]; then
if [[ "$BOE120_HP_MEMWIN_ID" != "" ]]; then
CE_CMDLINE_PREFIX="/usr/bin/setmemwindow -f -i $BOE120_HP_MEMWIN_ID "
fi
fi
export CE_CMDLINE_PREFIX
fi
export MARENA_OPTS=1:8
export MCACHE_OPTS=100:8:0
elif [ "$SOFTWARE" = "Linux" ]; then
LD_LIBRARY_PATH="$LIBRARYPATH:$perl/lib/5.8.0/i386-linux-thread-multi/CORE:$LD_LIBRARY_PATH"
export LD_LIBRARY_PATH
else
LD_LIBRARY_PATH="$LIBRARYPATH:$LD_LIBRARY_PATH"
export LD_LIBRARY_PATH
fi
CRCONFIGFILE="$java/CRConfig.xml"
if [ -f "$CRCONFIGFILE" ]; then
CRConfig11="$CRCONFIGFILE"
export CRConfig11
fi
if [ -d "$ODBC_HOME/locale" ]; then
set up the odbc symlink to work around:
The DataDirect SQL Server ODBC driver on UNIX will not function properly under a
locale other than "en_US" due to strong dependencies on their locale files.
MYLOCALE=`locale | grep LC_MESSAGES | sed -e 's|LC_MESSAGES="||g' -e 's|"$||g'`
if [ ! -d "$ODBC_HOME/locale/$MYLOCALE" ]; then
ln -s "$ODBC_HOME/locale/en_US" "$ODBC_HOME/locale/$MYLOCALE"
fi
fi
This was originally called TMPDIR, but now MainWin supports MW_TMPDIR, so we export MW_TMPDIR
ADAPT00506764 tracks the original issue with TMPDIR/Essbase Connectivity
MySQL now sets its TMPDIR in mysqlstartup.sh
set the tmp dir locally, if the value is not already set.
if [ x"$MW_TMPDIR" = x ]; then
if [ ! -d "$BOBJEDIR"/tmp ]; then
mkdir -p "$BOBJEDIR"/tmp
fi
MW_TMPDIR="$BOBJEDIR"/tmp
export MW_TMPDIR
fi
Comment this out to turn off custom Solaris memory allocator
if [ "$SOFTWAREPATH" = "solaris_sparc" ]; then
LD_PRELOAD="libhoard.so.1"
export LD_PRELOAD
Need to set up 64-bit specific library path so that 64-bit processes will
preload the 64-bit version of the memory allocator, and not the 32-bit version
LD_LIBRARY_PATH_64="$enterprise120/solaris_sparcv9"
export LD_LIBRARY_PATH_64
fi
setup the mysql env variables
if [ -d "$BOBJEDIR"/mysql ]; then
mysql env variables
MYSQL_UNIX_PORT="$BOBJEDIR"mysql/mysql.sock
export MYSQL_UNIX_PORT
fi
call env.sh from sub-directories (presumably from add-on installs)
for dir in "${BOBJEDIR?}/setup"/*
do
if [ -r "${dir?}/env.sh" ]; then
. "${dir?}/env.sh"
fi
done
fi
if [ X"$SOFTWARE" = "XHP-UX" ]; then
check for existence of u_flag, if it is, turn it back on.
if [ "$U_FLAG" = 1 ]; then
set -u
fi
fi -
Factory-class in data-sources.xml managed-data-source
OracleAS_1\j2ee\home\config has
data-sources.xml
Using managed-data-source.
For connection-pool, connection-factory factory-class If I use OracleDriver instead of OracleDataSource, what difference would it have? In terms of performance?
Thanks.Oops, a case issue...
class="oracle.jdbc.pool.Oracle[b]OCIConnectionPool" -
Hello Everyone,
I need to pull Quality management data from ECC to BI. I saw in LBWE(application component 05) its a part of LO-Cockpit. I never worked on this area. Can anyone please provide the information and the avialable BI datatargets to load.
Neep your inputs.
Thanks,
Lasya.Gurus,
Need your inputs, please help me out.
Thanks,
Lasya.
Edited by: lasya john on Dec 2, 2008 4:12 AM -
MDM Import manager data sources
Hi experts,
As far as I know MDM has ETL capabilities with MDM Import/syndicator tools that allows to load and extract data to and from MDM using files and relational databases as source/target.
What different kind of data sources supports MDM Import manager?
When should we work with SAP XI/PI?
When sould we work with ETL (Data Services as Data Integrator)?
Thanks in advance,
Abby
Edited by: Abigail Beurmann on Nov 23, 2011 11:38 AMHi Abigail,
So, Could you please tell me if it's a common practice to import data in MDM using files?
for example as you said, We want to import data from R/3 to MDM using XML files that XI/PI generates?
Yes its a common practice to import data in MDM in files.Most common mode of data exchange is xml which has many advantages namely it is accepted open standard,allows to clearly separate content from form (appearance), is text-oriented,is Secure, is extensible,is self-describing, is universal; meaning internationalization is no problem and XML is a future-oriented technology.
In our business scenario, We have a SAP CRM with SQL server 2005 as a source. Could MDM automatically import data directly from SQL Server or it's a better practice to generate XML files with PI using the Import Port/folder?
One should always use a interface as business rules can possibly change and making a later change could be huge ask.
So PI can act a interface between MDM and CRM.
CRM supports Bdoc and PI can integrate with CRM with help of ABAP Proxies.
The following thread provides you in depth information on integration of the 2 systems:
CRM-MDM Integration via XI
To help you understand more about webservice and PI integration with MDM for CRM integration please go though this thread:
SAP PI and Webservices
To know more about PI vs DS please go though this guide:
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/10fbac70-c381-2d10-afbe-c3902a694eaf?QuickLink=index&overridelayout=true
About Integration with PI:
http://www.sdn.sap.com/irj/scn/index?rid=/library/uuid/8035bf61-d6b5-2e10-5fa6-e5e00b9e6174&overridelayout=true
A guide which takes you through the entire process of CRM PI MDM integration,although for SAP MDM 5.5 version but valid for most part:
http://www.sdn.sap.com/irj/scn/go/portal/prtroot/docs/library/uuid/405a73cc-9068-2c10-859e-c13f81922e7c?QuickLink=index&overridelayout=true
Hope this helps.
Thanks,
Ravi -
Managing Data Source on a Report
Post Author: sliese
CA Forum: Upgrading and Licensing
Hi - I am wondering if there is a way to quickly change the datasource for a report. Set Data Source Location seems a bit too bulky. I would like to manage the datasource in a separate file (kind of like in other languages when you can have an XML file that defines the datasource and you can easily change the connection by editing the XML file)...I looked into OLE DB Data Link Files (UDL) and managed to connect my report with the UDL. But when I changed the DB that the UDL pointed to, it did not change the report. Once the report connected to the UDL, it was fixed. Any thoughts or ideas? -StephaniePost Author: V361
CA Forum: Upgrading and Licensing
look into adding a command. (stolen from the CR help file)
The Add Command to Report dialog box appears when you double-click Add Command in the Database Expert. The Add Command option is found in the connection folder for an active Database Files or ODBC (RDO) data source.
Use this dialog box to write your own SQL command (query) which will be represented in Crystal Reports as a Table object. -
Funds management data sources not available in RSA5
Dear all,
We have got requiremnt for implemtation of Funds management.
i have searched SDN for the same. my question is the data sources 0FI_FM_1 , 0FI_FM_2, 0FI_FM_31 ,0FI_FM_32 ....are availabel from help.
But in the system (RSA% )when i wanted to see these data sources then i cant find them.
what is the reason for that and how to go about it.
Regards
venuHi Venu,
The datasources u mentioned are now replaced with new datasources.
Please got through the thread for further information.
Datasource not present in RSA5 after appln component hierarchy activation
Hope it helps
Regards,
Javed -
Managing data source connections inside an Excel workbook for deployment reasons
Hi,
with a certain frequency, I use Excel to show SQL Server data, or SSAS data, etc. in tables, pivot tables, ...
So, a single Excel workbook can contain more connections and ofter a same connection is used.
When an Excel is deployed to a prod environment from a test environment an issue it to update each data source connections by specifing the prod server and/or the prod instance. To avoid to accomplish the boring task to change each single connection,
is it possible to perform it in a more simple or automatic manner?
Any ideas, please?
ThanksHey pscorca,
When you deployed Excel files to a product environment, why did you need to change the data source? Did you move SQL server DB and SSAS DB to the product environment too?
And when you click Data->From SQL Server/From AS ,then Excel should create a Office data connection file which is usually saved in: C:\Users\Username\Documents\My Data Sources . If you have multiple Excel files need to use the same connection,
you can choose the Existing Connections, then select the odc file. If you want to change your connections, you just need to Edit the .odc file.
Wind Zhang
TechNet Community Support -
[ODBC Driver Manager] Data source name not found and no default driver spec
Hi,
I am working with the following program. The same program is working with JBOSS but not with Tomcat-5. I am using MS-Access. now. Please Help me.
import javax.servlet.*;
import javax.servlet.http.*;
import java.io.*;
import java.sql.*;
public class MDBGetData extends HttpServlet{
Connection con=null;
Statement st=null;
ResultSet rs=null;
public void doGet(HttpServletRequest req,HttpServletResponse res)throws ServletException,IOException{
PrintWriter out=res.getWriter();
out.println("Connecting To data Base");
try{
Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
con=DriverManager.getConnection("jdbc:odbc:cmpny","sa","");
st=con.createStatement();
out.println("Connected to database");
rs=st.executeQuery("select * from cmpny");
while(rs.next()){
out.println(rs.getString(1));
catch(Exception e){
System.out.println("Error While Creating The connection : " +e);
}Cross-post
http://forum.java.sun.com/thread.jspa?threadID=620490 -
Hi,
I am working with the following program. The same program is working with JBOSS but not with Tomcat-5. I am using MS-Access. Working with this program is very essential now. Please Help me.
import javax.servlet.*;
import javax.servlet.http.*;
import java.io.*;
import java.sql.*;
public class MDBGetData extends HttpServlet{
Connection con=null;
Statement st=null;
ResultSet rs=null;
public void doGet(HttpServletRequest req,HttpServletResponse res)throws ServletException,IOException{
PrintWriter out=res.getWriter();
out.println("Connecting To data Base");
try{
Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
con=DriverManager.getConnection("jdbc:odbc:cmpny","sa","");
st=con.createStatement();
out.println("Connected to database");
rs=st.executeQuery("select * from cmpny");
while(rs.next()){
out.println(rs.getString(1));
catch(Exception e){
System.out.println("Error While Creating The connection : " +e);
}This is code for connect mySQL database:
Connection con=null;
Statement stmt=null;
ResultSet rs=null;
// Set up the JDBC connection
try {
// Create
InitialContext ctx=new InitialContext();
ds=(DataSource)ctx.lookup("java:comp/env/jdbc/mysql");
con=ds.getConnection();
stmt=con.createStatement();
rs=stmt.executeQuery(sqlQuery);
catch(SQLException e){
Note: before you use these code you have to set datasource in tomcat
I will show you how to do it next post. -
Error while creating data source using Oracle Enterprise Manager 10g
Hi,
I have deployed my web application developed on OC4J 9.0.4 stand alone (Win2K) to an integrated OC4J version(Solaris) using Oracle Enterprise Manager 10g.
However, I get an error when I try to create a data source.
The data source I want to create would have the following parameters (as seen in data-sources.xml on the stand alone version):
<data-source
class="com.evermind.sql.DriverManagerDataSource"
name="TestDS"
location="jdbc/OracleCoreDS"
xa-location="jdbc/xa/OracleXADS"
ejb-location="jdbc/TestDS"
connection-driver="oracle.jdbc.driver.OracleDriver"
url="jdbc:oracle:thin:@hostName:1521:test"
username="user"
password="password"
min-connections="5"
max-connections="20"
inactivity-timeout="30"
/>
When I entered the above data on the Enterprise Manager Data Sources page, I got the following error:
quote:
Error saving Data Source Properties. - Entity et="system";ei="0",et="application";ei="48",et="data-sources";ei="167":child:data-sourcechild key:location:jdbc/OracleCoreDS; class:com.evermind.sql.DriverManagerDataSource; already exists in the repository. Resolution: Please check the code base.
unquote:
Could somebody tell me what I'm doing wrong ?
I tried to manually edit the data-sources.xml file but the data source didn't show up on the Enterprise Manager.
I'm using a new OC4J instance (on the Solaris machine) for my applications. Is the data source error related to this?
Any help will be greatly appreciated.
Thanks,
ShyamThanks for your reply , Steve.
I noticed that there is a default datasouce on the EM with the following parameters:
<data-source
class="com.evermind.sql.DriverManagerDataSource"
name="OracleDS"
location="jdbc/OracleCoreDS"
xa-location="jdbc/xa/OracleXADS"
ejb-location="jdbc/OracleDS"
connection-driver="oracle.jdbc.driver.OracleDriver"
username="scott"
password="->pwForScott"
url="jdbc:oracle:thin:@localhost:1521:oracle"
inactivity-timeout="30"
/>
The location and xa-location attributes that I use for my "test" data source are the same as the default one. So, could this be the issue?
What should be the values for location and xa-location attributes from my "test" data source?
Any help will be greatly appreciated.
Thanks,
Shyam -
How can I use Data Source Explorer to connect soap service with my work manager project?
Hello,
I am new in Agentry and I want to Consume soap service in work manager project.For that I add my service in data source explorer but I dont have any Idea that how can I go further in that to use this service in my project.Are you consuming OData service or SOAP service ? Your heading says something but looking at screen it is OData service.
I have not worked on OData service in Agentry but hopefully you can figure out rest of the steps:-
Here are some high level steps you can follow depending on what your trying to do.
1. Open "Data Source Explorer" view->Eclipse, select "Window/Show View/Other->"Data Management/Data Source Explorer"
2. On "Data Source Explorer" view, ->"OData Connections"->right click and select "New...
3. Enter name of the connection profile.
4. Enter Service URI of in OData Connection Details
5. After "Test Connection", press "Finish" or click "Next" to view Summary.
6. Right click "Yourproject" node under "OData Connection", select connection. You will see "Entities"
7. Expand "ODataEntities", right click "Entityset", select "Agentry: Connector Studio\Object Wizard for OData".
8. Select a module to add odata connection, click "Next"; and click "Next"; and click "Next"
9. Check "Add", "Edit" and "Delete" on "Transaction Selection" screen.
10. Create your own screenset and platform as required.
11. Test the changes.
Thanks
Manju
Maybe you are looking for
-
Hello All, Hoping someone can help us out. We recently purchased a Samsung SmartTV (which we love) and got rid of our huge cable bill. I also have purchased the adaptor for my 2009 MacBook and the appropriate HDMI cable for the adaptor and the tv. I
-
How to redirect https traffic to captive portal?
Any WLC controller model (8500/5508/2504/vWLC) version 7.3 and up.. This is unusual scenario wherein clients have a default homepage to https://www.google.com (sample only) Typical http web redirection don't have any problem at all. When you open you
-
I am trying to understand how to create a photogallery that has self sizing frames around the pictures as they load. can someone please give me a place to start learning about how to do this. here is an example of what I am trying to do. http://www.b
-
I have 7 flexrio cards 5 7965 and 2 7961 and am heavily using P2P streaming to transfer data between them. The chassis is a PXIe-1065. Having enable all the P2P connections is there anyway of knowing which of the links go by the backplane switches an
-
What webbased tools can I use to create a custom PDF Reader Web App?
I want to build a webtool that allows user to view PDFs but I also want to add my own toolbar to allow users to do some custom things to the document like select text and return that text to the webapp (built with AJAX). Or maybe insert a bookmark or