Quality Management with SAP

Hi Experts,
Can anyone give me Xerox of this book :- Quality Management with SAP (by M. Holzer (Author), M. Schramm (Author)
thanks
Utkarsh

You can directly download from
[http://www.sap-press.com/product.cfm?account=&product=H1902]
OR
[http://www.amazon.com/Quality-Management-SAP-M-Holzer/dp/1592290515]
Regards,
Shyamal

Similar Messages

  • Installing data quality management for sap for multiple sap system

    Hello folks,
    I have an Requirement where i need to install data quality management for sap in multiple sap system.
    I have installed it successfully for one system .
    here my data services is installed in one server with rfc server as windows services in same server.
    i have done the required configuration in ecc side.
    my question is how do i use same data services jobs which are configured as real time services for both my sap connection?
    in simple terms how do i installed dqm for multiple sap system having single data services server.
    thanks,
    Shubhangi.

    Hi Vishal,
    Regarding DQM Please refer the below Link.
    Links:
    http://scn.sap.com/community/data-services/blog/2013/07/18/i-installed-dqm-for-sap-you-can-too
    or you can also refer below SNotes given by SAP:
    1732816 - How to manually import DQM ATL files correctly after failed install
    Note 1732816 - DQM Adapter Dataflow installer fails on Data Services 4.1
    Links:
    https://service.sap.com/sap/support/notes/1732816
    Thanks,
    Daya

  • Configuration Guide Job Scheduling Management with SAP Solution Manager

    Dear Gurus
    Could you please help me with the configuration guide of the Job Scheduling Management with SAP Solution Manager
    Best Regards

    Hello Luis,
    the configuration activities can be accessed via the "Implementatiopn Guide" by calling transaction SPRO in your SAP Solution Manager system.
    In SPRO navigate to -> SAP Solution Manager -> Scenario-Specific Settings -> Job Scheduling Management -> Standard Configuration and execute the following two activities.
    1. Activate Solution Manager Services
    2. Set Up Work Center for Job Scheduling Management
    Make sure that your user has role SAP_SM_SCHEDULER_EXE (or_ADMIN) assigned.
    Afterwards you should be able to access the Job Management Work Center and to create Job Documentation or to import Jobs from a Managed System into new Job Documentations.
    The following SAP notes might be usefuly as well:
    1054005  - FAQ on Job Scheduling Management
    1117355  - Work Center roles
    Kind regards,
    Martin
    http://service.sap.com/jsm

  • Configure & integrate the quality management with production planning

    hi,
      i know general flow of production planning ,
    i dono how to configure & integrate the quality management with production planning . can anyone explain step by step to configure.
    with regards,
    Elanchi

    Hi,
    You must define an inspection type 03 and activate it for materail. When you create production order you will have the inspection lot created. you define type of inspection plan in inspection lot type. You will insert an operation in routing og the material. This operation must contain inspection characteristics. use the operation key QM04 with a quality work center.
    Inspection process time will be assigned to your production order.
    I think you can manage t customise the process from this global definition of the QM process in Production.
    Best Regards,
    Salih Arslan
    SCM Functional Consultant
    Zeitine Solution Partners

  • UCCX Advanced Quality Management with VMware View

    Hi,
    I have a customer who uses UCCX 8.5 with VMware View clients running CAD and 7940 IP phones.
    They are looking at recording options and have expressed an interest in the Advanced Quality Management product.
    There are a few issues that I would need to consider specific to their environment.
    The first is that Desktop based recording would not work in this environment as CAD is running on a virtual desktop rather than a PC daisy chained to the IP phone. The second is that network based recording is not supported as the 7940 phones do not have a Built in Bridge.
    This leaves server based recording which uses SPAN port mirroring. The issue with this is that the agents phones are distributed across multiple Catalyst switches so I guess I would need to configure RSPAN - has anyone got any experience of using Cisco QM with RSPAN? - if yes how well did it work? - the customer would probably be willing to upgrade the IP phones used by the agents if that would be a better option.
    The final query relates to the Screen Recording Client - the install guide details how to install this on a Citrix server but makes n mention of VMware view. Does anyone know if support for this is on the roadmap?
    Thanks!

    Hi James
    I've done an RSPAN deployment with UCCX recording which I presume will have similar gotchas...
    The only issue I had was that I ham fisted an RSPAN config in that SPANned the VVLAN on all the edge switches. My mistake was that I didn't exclude the uplink ports, and these switches were stacked, so there was a lot of packet duplication initially (sounds like 90s dance music time stretching).
    If you ensure you SPAN ingress only on all the endpoints (i.e. phones, and gateways) and then exclude any ports where traffic might be seen a second time (e.g. switch uplinks), and then filter for the voice VLAN  you should be OK.
    This deployment was a routed LAN with different subnets on each edge stack but this worked OK with everything running through a single RSPAN session back to the server.
    I've not had the good fortune to have to do this more than a couple of times, and I've not done it for AQM  - but assuming that SPAN/RSPAN are supported along with the video recording part running on the endpoints I don't see it being too different as they seem to be written by the same people.
    Can't help re: VMware view either I'm afraid... 
    Aaron

  • Master Data Management with SAP

    Hi
    Master data management in SAP platform is in Compilation
    of report structure where you have additional variables such as field documentation code a field processor and
    a system capable to do this compilation./In other words SAP Master Data Management is a code programmer In Java
    . Master data Mangement is a programmer's capacity to do
    his compilation in Java. Vb C++ is the system mangement architecture. Code is fabricated in this environment for Sap Master Data Management
    K Balakrishnan

    Hello Michelle,
    First of all, MDM Admin UI and SRM-MDM Search UI both are in same sca file (SRMMDMCAT20SP03P05.sca) and there is another sca file with API and MDM Connector (MDMJAVAAPI06_2.sca).
    Remember that files name might be change as per the business content version.
    So there are two file which you need to deploy. You can deploy these two file on any Web Application Server (WAS 7.0 and Above) using Software Deployment Manager (SDM) of SAP NW AS J2EE installation.
    For further information about these files, you can refer the SAP Note- 1057316 -- SRM-MDM Catalog 2.0 - Installation & Configuration.
    For checking the successful deployment of these SCA files, you can check with the mentioned below URL:
    http://ServerName:PortNo/webdynpro/dispatcher/sap.com/tcmdmsrmcat~uisearch/MDM_SRM_UI_App
    go to the above link, try to connect with the MDM Server which you have installed. After connecting the MDM Server, Choose your SRM-MDM Catalog repository and try to connect with the user as "Master" with blank pwd. If you are able to login in the repository, it means you have successfully deployed the correct sca files.
    For further details regarding this scenario, you can refer my answer in below thread:
    installion of SRM-MDM Catalog 2.0
    I hope, this will clear your doubt.If you need further help, Kindly update us.
    TNR,
    Saurabh...

  • Quality Manager with Contact Center Enterprise (not Express)?

    Is Quality Manager (part of the Workforce Optimization package) supported with Contact Center Enterprise?  The documentation focuses on Express only.
    Thanks,
    Tom

    You buy QM Enterprise direct from Calabrio, and QM Express from Cisco.

  • CAD send metadata to Quality Management with chinese string

    Hi everybody,
           I'm facing a problem is when I want send a metadata to the Quality Management for a recording, it's failed when the metadata include Chinese string,  the error reason is "Tried to read incomplete UTF8 decoded String". And I believe the database of QM is support for Chinese string because I can change the metadata field in the database to Chinese string manually.
           Does anybody know how to send Chinese string to the Quality Management?
           The attachment is screenshot for the error and the result when I change database field into Chinese manually.
           It's really need somebody can help me to resolve this problem.
    Best Regards.
    Tony.Ye

    Hi James
    I've done an RSPAN deployment with UCCX recording which I presume will have similar gotchas...
    The only issue I had was that I ham fisted an RSPAN config in that SPANned the VVLAN on all the edge switches. My mistake was that I didn't exclude the uplink ports, and these switches were stacked, so there was a lot of packet duplication initially (sounds like 90s dance music time stretching).
    If you ensure you SPAN ingress only on all the endpoints (i.e. phones, and gateways) and then exclude any ports where traffic might be seen a second time (e.g. switch uplinks), and then filter for the voice VLAN  you should be OK.
    This deployment was a routed LAN with different subnets on each edge stack but this worked OK with everything running through a single RSPAN session back to the server.
    I've not had the good fortune to have to do this more than a couple of times, and I've not done it for AQM  - but assuming that SPAN/RSPAN are supported along with the video recording part running on the endpoints I don't see it being too different as they seem to be written by the same people.
    Can't help re: VMware view either I'm afraid... 
    Aaron

  • Cisco Unified WFO - Call Recording and Quality Management with Extension Mobility agents

    Hi All,
    We're considering Cisco Unified WFO - Call Recording and Quality Management for a customer running UCCX 8.0, agents on multiple WAN sites, all agents using extension mobility.
    The documentation I've been able to find describes three different recording methods:
    Using Desktop Recording service (Endpoint) to record from an agent’s desktop.
    Server Recording - Uses SPAN (not so good for remote sites)
    Network Recording - Uses CUCM recording service / SIP trunk / phone's built in bridge.
    Network recording or Desktop recording should be suitable for the customer but it seems that Extension mobility is not supported.  Extension Mobility is not mentioned in the 8.5 installation guide, it is mentioned as ‘not supported’ in the 8.0 guide as follows:
    'Server Recording and Network Recording have the following limitations:
    • Extension mobility is not supported.'
    Neither version's documentation specifically mention extension mobility in relation to the desktop recording method, though I realise this is a similar approach to the 'server recording' method.
    So the question I have is:  Is extension mobility supported in any way on version 8.0, or version 8.5 for recording?  And if so which recording method(s) are supported?
    Thanks,
    Jonathan

    Hi,
    I had more luck asking questions over at the Calabrio forum - they make the software and Cisco re-brand a version of it - there is some good info on their portal (http://portal.calabrio.com), you have to register but it's fairly painless.  The answer I got was:
    "QM Desktop recording has always supported extention mobility as it determines the recorded user by the desktop user's login. Extention mobility was not supported for Server and Network recording until the Calabrio QM 8.6.2 release in April 2011 and will be added to Cisco QM starting with QM 8.5.2 in June 2011"
    Regards,
    Jonathan

  • BO Data Services Change Management with SAP Charm Functionality

    HI Gurus,
    We have been tasked with automating the Change Management activity for Business objects data Services. The same is currently performed as a manual task which could be prone to errors. We have researched all over the place and we have not been able to find any documentation on in order to carry out this activty through Solution Manager ChaRm functionality.
    So, Can SAP Solution manager perform the LCM (Life Cycle management) for Business objects Data Services via means of it CHaRm functionality?
    Right now we know that the components for BO are present on Solution manager within the SMSY transaction. We have also been able to create the complete landscape within the same and create a project template for it.
    Now the challenge is how do we configure ChaRm in order to move the DI code from one repository to the next?
    here are the requirements we are trying to implement:
    1. Create a full landscape for Business Objects Data Services within SMSY in Solution manager
    2. Create Project template for Business objects Data Services
    3. Create RFC connections to Database and BODS Client Servers
    4. Configure Charm in order to automate Change Management for Data Service
    Please advice.
    Thanks,
    Nat Hernandez
    SAP BO/BW Technical Architect

    Hi Natanael
    I am also looking for the same
    Would you please let me know how did you implement this

  • RDS for Quality Management in SAP

    What are the business process and process flow of RDS in QM. and what are the difference of RDS with standard SAP ?
    from where I can get documents of business process and process flow of RDS for QM ?

    Dear Hummel
    This link required SAP ID and use less for those who do not have S User ID's.
    further more.... could you please differentiate Stand SAP QM process compare to QM process in  RDS?

  • Sample Questions  Logistics Execution and Warehouse Management with SAP ERP

    Hi all,
    I am studying the above (C_TSCM66_65) and need some sample exam questions. Anyone know where to find some?
    Thanks.
    JJ

    SAMPLE questions you can find here: http://www.sap.com/services/education/certification/schedule/CTSCM6665.epx
    Best regards + good luck
    Juergen

  • Opinions about the book "Mastering HR Management with SAP"

    Hi,
         I would like to know the opinion about this book.Can it be usefull?.....Can I find in it something diferent of THR10,THR12....etc......?.Thanks

    Mastering HR is more sophisticated but THR 10 and THR 12 are more simple and easy to understand you can buy the mastering hr once your thru with these books
    all the best
    manikya

  • About Book "Transportation Management with SAP LES"

    Hi,
    Does anyone know whehter the E-version book also provided when purchased this book.
    Thank you very much.

    Hi
    The E-Version is not provided with the purchase of the hard copy of that book.
    Thanks,
    Ravi

  • Logistics Invoice verification and Quality Management

    Hi,
    We have good receipts in purchases orders, with materials that must pass quality inspection (with SAP QM quality management)
    I need to know if there is any u201Cstandardu201D way to connect quality management with logistics invoice verification; the requirement is that the invoice cannot be released to payment (unblocked) until the materials of the goods receipt have passed the quality inspection.
    Thank you very much for your help!!
    Manuel

    Dear ,
                  Here is the path
    IMG>> Quality Management -->QM in Logistic --> QM in Procurement -->Define Control Keys
    now here After Defining the Control Key, Go to QM in Procurement Tab
    and Check the Block Invoice Checkbox
    This may help u
    REgards,
    Pardeep Malik

Maybe you are looking for

  • Unable to change text size

    So I have been unable to change my text size in itunes. When i switch between "large" and "small" text sizes the size remains the same, however the size of the menus and the itunes stores is small. I theorize it was probably some program I installed

  • Bomexplosion,workcenter with routing

    Purpose The purpose of this report is to show the summary of Routing details of a Finished component  from Raw material via Semi-finished component in a single report. Concept of BOM for finished components are defined in terms of semi finished goods

  • 4G+: How does it work?

    Today we launched 4G+ in central London. The new 4G+ service means faster mobile data speeds of around 90Mbps with the possibility of reaching up to 150Mbps. But how are we reaching these crazy new speeds?

  • Slow Performance Oracle 9i

    Hello There; Our company OLAP database is facing performance issues where 1 simple query could take it more than to 20 mins to return result. I am newbie to Oracle DB, i was told to look at the explain plan and yes , the plan looks alright where it u

  • Eliminating album art on display

    Hi All, Is there a way to eliminate the album art on my display? I would just like to see the 'written parts': artist, song title, etc. Thanks for any advice. Greg