Quality Module Question: Grouping Defect Codes by Work Center

Is it possible to group Defect Codes by Work Center?

Welcome to the forum.
Please post this question in the below forum
[Forum: ERP Operations - Quality Management (QM)|SAP ERP Operations - Quality Management (SAP QM);
thanks
G. Lakshmipathi

Similar Messages

Work center in PS module

Hi Expert,
Do we need to create a work center in PS module? What the function of work center in PS module? Where we should attach a work center in PS module ? (WBS/network/activity?
Plz advice.
Cheers.

Hai
Work center can be assigned to either an organizational unit or a work center in the Human Resource Management System (HRMS).
Work centers belong to the most important master data in the R/3 production planning and control system.
In SAP PS workcenters used for workforce / resource / capacity planning /scheduling a work - based on the workcenter - for an particular Activity(Internal) by maintaining the proper workcenter.
Based on the work performed actual costs known with the help of Cost center maintained in the workcenter.
Using CNR1 - can create the workcenter or using CNR2 can be duplicated to your requirement.
check this link to know more about workcenter -
http://help.sap.com/saphelp_47x200/helpdata/en/b1/c03424439a11d189410000e829fbbd/frameset.htm
Enjoy SAP
Regards
PP

How to find the reporting for work center machine wise

hi gurus
My question is . In one work center machine capacity category 2 machines are used. Client is asking the report machine wise. i.e as 2 machines are available .What is the capacity utilisation for each machine.Provide me the information for this. Thanks in advance
kalyan

Hi Kalyan
you have to make some settings in production order & work center first.
In work center capacity header ,you have to make indiovidual capacities as 2.
In the same capacity header screen by going through the menu Goto--->individual capacitities define these different individual machines.
In the production order operation detail screen goto " capacity reqmt assignment " assign the quantities for different work centers.
Adfter this in the confirmation CO11N you have to fill the split field accordingly& confirm different wortk centers seoperatley.
Then you can the report in the CO14 for diferent work centers.
you try this.
Regards
YMREDDY

FM for List of Work Center.

Dear Friends,
I am looking for the functional module which give me list of work center ;
Like Customer will provide the product requirement and depend upon product specification i should get the specific work center where the product will manufacture.
Regards

Check with Below FM's :
CR_WORKSTATION_READ
CR_WORKSTATION_CHECK
Search in SE37 like CRWORK and thereis no BAPI
Table name is CRHD
Thanks
Seshu

Rotating Off-Days in PM Work Center Available Capacity

Good Day!
Background:
Each Maintenance person is represented by a PM Work Center.
Maintenance person have a rotating off-days which cycle repeats after 21 days.
Requirement:
We want to reflect rotating off-days to PM Work Center Available Capacity.
Options tried but did not worked;
Shift Definition Grouping:   Off-days is in HR's Period Work Schedule but only Daily Work Schedule can be pulled into Shift Definition Grouping and then into Work Center
Reference Available Capacity:   Can be achieved via Shift Sequence Key in interval of available capacity but needs to maintain for each week with on-going maintenance
Do anyone has implemented this similar requirement that we can reapply/build on?
Your valuable inputs are deeply appreciated.
Thanks!

In work center capacity header
click   change intervals
click   insert
Enter manually
valid from and valid to dates
No of ind capacity - 0

Work center deletion -reg

Hi,
Can you put deletion flag for a work center ?
or is the only option is go to CR02 and delete ?
Once we delete then latter any thing to revert of trace means what to do ?
is it possible to put deletion flag for a work center and revoke when required again ?
please help
regards,
madhu kiran

Hi,
The question is while deleting the work center , system will not allow to delete unless its taken out from all the routings where ever it is assigned .
But when i put deletion flag its not stopping instead its proceeding further and just setting the deletion flag for the work center
issue is when the work center is in use in routings system should not allow to put deletion flag
once i put deletion flag system should not allow to use the same work center in any of teh routings
but system is allowing both
only at the time of standard cost run we can get an error saying that working center is set deletion flag
instead when i try to set the deletion flag itself ca system prompt and stop me doing that and when i set it should stop me using the work center set for deletion in any routings further
what should be done ?
regards,
madhu kiran

Work center capacity or WT generic

Dear All
Is it possible to have Work center determination based on Bin capacity ,
if not then as second option
Is it possible to have WT generic for work center determination where in the picker based on the available work center will enter the bin and confirm the task.
Please confirm with the storage type settings/role to accomplish the above..
regards
Saravana

Hi
Request you guys to validate the Work center functionality summarized below and provide your feedback/clarification if any.
Case 1: User decides on the bin during confirmation
It is realized through POSC setting for OB02 ,,either having storage type or type and section without bin.
Open Points:
WT generic setting at storage type doesn't need to be generic ( values 1 and 2) , It can still remain as not generic (=with Bin)
It doesn't work based on work center determination setting(/SCWM/PACKSTDT) and having rule based checked at POSC..
Case 2: User will drop the picked items in common work center
It is done by having common Inbound section shared between multiple work centers and then the pack center user drags and drops the items/HU from common bin to working bin .. If required there can be an additional bin to reflect the completed work.
Case 3: Based on consolidation group
It is achieved by having Consolidation group as Put away rule and work center determination based on consolidation group.(/SCWM/PACKSTDT)
System dynamically determines the bin per consolidation group.
Open Points:
If there is no work center available during picking for a particular consolidation group ( means all available work center are occupied with different consolidation groups) then surprisingly the pick is directed to staging area ( Is this expected behavior??)
Case 4: Work center determination Based on Remaining capacity
BADI Development..
Thanks Juergen for your inputs ,, Now i am convinced with the validation( error message) at storage type configuration of having both storage type role E and capacity check active..
regards
Saravana

Number Range for Work Center

Hello All
Am having a little concern regarding the number range for Work Center, kindly let me know where the number range for Work Center is maintained or from where it is picked up when we are using external no range assignment for Work Centers.
Regards,
J K Tharwani

Thanks Sir for your reply,
Actually the requirement is the client want that Equipment number must be the same as the Work Center Code, and Work Center code which i have decided is something like 0101001 & if i give the external no to the Equipment then the system doesnt take the same number instead it takes 101001 i.e. it ignores the initial "0" in the work center code. Actually I wanted to see the no range from where the work center numbering is being picked up, but later on i came to know that there is no such no range setting for work center instead it has contol from no range for object type. Shall look forward to your valuable inputs & guidance.
Regards,
J K Tharwani

CTI Work Center ID not defaulted

Hi,
we're running CRM 7.0 with Computer Telephony Integration via Cisco/Bucher&Suter. My question is related to the Work Center ID which has to be entered by the agents during log-on. The work center ID is usually defaulted on the next log on, however, sometimes the work center ID is blank for some agents during log on and they have to manually enter it. I'm trying to find out how the work center ID is linked to the user logging on. I cleared my browser settings, deleted cookies, etc., but couldn't reproduce the issue some of the agents have. My work center ID is still defaulted when I log on. Anybody had this issue before or can tell me where the link between user and work center ID is stored?
Thanks
Ulf

Hello Ulf
As far as I know, the default workcenter Id is retrived from the CMS each time ICI request for user capabilities during log in process so you should have a talk with your CMS provider to check why it's not sending the default worcenter id. Check the method IciSystem_getWorkcenterCapability_Request defined in the ICI specification,
I hope this helps
Regards
Julio Peralta

Automatic Defect code assignment for Quality Notification

Dear all,
We have created MIC in which Min and Max spec limit is specified. We have assigned proper defect coding in the catalog as well for those defects.
For. E.g. MIC - LSL - 7.62 - Defect code assigned - Less Diameter
USL - 8.38 - Defect Code assigned - High Diameter
Now when the user enters any results in the result recording screen which is higher or lower than the spec limit , then the system automatically takes him to the notification screen where in he has to select the defect code manually.
My question is depending upon the entered results which are above or below the spec limit, whether the system can assign the defect code automatically or not?
Regards,
RP

Read this:
http://help.sap.com/saphelp_470/helpdata/en/2d/35185a448c11d189420000e829fbbd/content.htm
and this:
http://help.sap.com/printdocu/core/print46c/en/data/pdf/QMIMDEF/QMIMDEF.pdf
(Page 15 esp.)
My guess is that you have an item clicked as required in the confirmation profile.
FF

Can we control Work center group links using auth object UIU_COMP

Hello All,
We are running into an issue while doing our PFCG role configuration.
I need to know if we can control Work center group links in a business role through auth object UIU_COMP.
We can control Workcenter's but not 'Work Center Group Links'.
Here is what we did:
- We have a business role Z_RA_DEFAULT.
- The Nav Bar Profile SRV-PRO for this business role has some work center group links that are checked in menu and visible.
- I'm trying to find the values in the auth object UIU_COMP to restrict Work center group links.
- Even though the values Work center group links are in menu and visible,
I want to remove these Work center group links from the screen using the auth object.
- If we remove the check from in menu and visible in the business role the Work center group links disapper from the screen.
Right now this is only way we are able to controle Work center group links.
Question:
- Can I use UIU_COMP to restrict Work center group links?
- any another auth object that controle Work center group links?
- any document/ website / info available which tells us what can we restrict with auth object UIU_COMP?
- or any other way of doing this... like code change, user exit, ....?
Really appreciate your help.
Thanks,
Nasir

I am not sure if I have understood the issue correctly, but still what stops you from actually creating a clone business role to your existing business role and deactivating the in menu visible work center group links. Use this new business role for users who need to be prevented from viewing the work center groups links in question.
If you are going to use authorization objects to control the visibility wont it impact all users (still defeating your original purpose?)
Again apologies in case I have got the question wrong.

Very basic modules questions (ath_pci, etc)

Hello! (I'm sorry, I posted this one in another forum first, thinking I was posting it in this one :oops: )
I have a very simple question:
Where can I find modules (e.g., ah_pci for my Atheros mini PCI wireless card), and where and how do I install them?
For example, when I do:
modprobe ath_pci, I get a message saying something like:
can't find ath_pci module;
although I've seen a directory with this name on my system (IIRC, under /sys/drivers???).
Other example:
I have a 855GM Intelchipset. How do I find the module for it and how do I install it?
Thanks a lot.

Thanks for the reply, and for deleting the other thread.
I looked for /lin/modules, and I don't have a /lin directory... Is it normal?
Or maybe you meant /bin/modules...? Anyway, I looked for this too and there is no /modules directory under /bin.
I found some modules under /sys/module. There is one named ide_cd that I put in the MODULES array of rc.conf (just for a test, I don't know why it is for...), but I get a message at bootup:
[/code]FATAL: module ide_cd not found[code]
Is this normal too? Or it has to be compiled with the kernel to work. And BTW, if I compile the kernel (I don't think I'm at this point in Linux yet!), do I loose my installation or if everything stays in place in my system?
Thanks a lot![/code]

Oracle Quality Module - Collection Plan name

The collection Plan name field in Orcale quality module - collection plan form (QLTPLMDF) does not accept special characters. Why is this so and what is the rationale behind this?
Here is the wording from Oracle Quality user Manual
Collection plan names can include alphanumeric characters and spaces. Collection
plan names can have up to 30 characters, and the first 25 characters must be
distinctive. The only special characters that can be included in a collection plan name
are the underscore (_) and the single quotation mark (’). any special
I am working with a customer who wants to use decimals (Example: 35.24.101) so that search will be easier. Some screens does not allow searching by description so need to have these in the collection name/code
Any solution you can think of?
Thanks

Hi,
When you create the collection Plan , actually you are creating the name of the table with required column names as collection elements in the data base.
This is the reason you are not allowed to do so as per your query.
thanks,
Raja

ABAP Unit for Function Module(Function Group)

Hi, Gurus:
Can we use ABAP Unit to test Function Module(Function Group).
If can, give me a simple example. how to create methods. Thanks.
Regards,

I'm a little unclear about your question, Yunfa.
Do you want to single-test a SE37 function-module? This can be easily done, just hit the F8 button, and it takes you to a single-test environment.
Do you want to test an FM using an ABAP-program? This too is easy to do. To code the FM-call, there's a button called Pattern, in the standard SE38 screen, where you can put in your FM name, and it inserts the relevant code in your program.
Note that if you're testing BAPIs using the single-test environment, the actual document posting will not happen, because that requires a BAPI_COMMIT_WORK call. So, the way to test BAPIs which post documents would be to write an SE38 program, which also calls the commit-bapi.
Hope this answers your question!

How to go into a function module through SE80 t - code

Hi All ,
How to go into a function module through SE80 t - code.
Thanks in advance.

>
Balaji Krishnamoorthy wrote:
> Hi All ,
> How to go into a function module through SE80 t - code.
>
> Thanks in advance.
Hi,
With help of function group
Thanks & Regards
Edited by: Always Learner on Oct 16, 2008 2:31 PM

Quality Module Question: Grouping Defect Codes by Work Center

Similar Messages

Maybe you are looking for