Quality Notification Docu

Hi friends,
can anybody provide me with information regarding Quality Notification or where I can find a good docu?
Thank you very much in advance.
Rg. Jimbob

Hi greetings
Please find the attached links
[Quality notification|http://help.sap.com/saphelp_47x200/helpdata/en/2d/35250f448c11d189420000e829fbbd/frameset.htm]
Award appropriately while closing the thread.
Gobinathan G

Similar Messages

Change of quality notification document type

Hello guys,
the SAP enables change of notificaiton type, but only if original notification has origin "General notification". Has somebody succeeded to change also notification with origin "Q1 Customer complaint", meaning Quality notification.
Thanks
Br, Jan

In config, you have to explicitly define what changes you allow.
Most of my clients have defined their own not. Types. So we have to define for each one, what other not. type it is allowed to be changed to.
In config, under the Quality Notifications area, select Notification Creation --> Notification Type --> Allowed Change of Notification Type.
It should be pretty clear once you are in there.
You must test the conversion however. Read the config help and it will talk about inconsistencies. The data from the source QN must map ok to the target QN. If you special requirements in the target QN like certain mandatory fields, it might nit be possible to make the conversion. Each possible conversion should be carefully tested.
FF

Material Document field to be added in the Quality Notification F3 type

Hello Experts,
i have to add Material Document field in the Quality Notification (F3 type --Material rel. defect ) through
T-code QM01.
Please help me out.
thanks

Hi
IMG-->QM>Quality notifications->Notification Creation->Define Screen Templates--> Define Initial Screens--> select F3 here and enter QM03_CREATE_QMEL_WITH_WINDOW in the column Name of the function module and enter 0100 in the initial screen column., save it.
If you wish to make material document field mandatory, then go to
IMG-->QM>Quality notifications->Notification Creation->Define Screen Templates--> Field Selection: Initial Screens--> select the radio button as REQ for the field RQM01-MBLNR that is for material doc.
Similarly for in the above menu you can make mandatory for reference object screen also
IMG-->QM>Quality notifications->Notification Creation->Define Screen Templates--> Field Selection: Reference Object Screens--> select the radio button as REQ for the field RQM01-MBLNR that is for material doc.
Now, once you finish this , go and try QM01 you will find the POP for Material document entry coming immediately if you pres the Notification button for F3 Notification type.
Best Regards
SAM

Document Info Record Visiable in Quality Notification

Greetings All,
I am trying to set a Document info Record in the material master such that when a quality notification is created; the DIR will appear in the Supporting Documents tab/Linked documents (Quality Notification). The DIR should be material specific such that when a QN is generated; the linked document field is auto populated.
Your attention into this matter is greatly appreciated.
Many Thx,
jaime

Hi,
In context with DMS when we create DIR it can have object links. In ur context Object links are material code and the Quality Notification.
When u create DIR using CV01N and assign Material code in object link tab the same can be viewed thru material master ---> additional data -
> document data
If you assign Quality notification number in Object link tab , the link will get created with Quality Notification which can be viewed in subject tab of Q Notification.
Regards,
Nitin

Document Info Record (MM) self populating in Quality Notification

Greetings All,
I am trying to set a Document info Record in the material master such that when a quality notification is created; the DIR will appear in the Supporting Documents tab/Linked documents.
Your attention into this matter is greatly appreciated.
Many Thx,
jaime

Hi,
In context with DMS when we create DIR it can have object links. In ur context Object links are material code and the Quality Notification.
When u create DIR using CV01N and assign Material code in object link tab the same can be viewed thru material master ---> additional data -
> document data
If you assign Quality notification number in Object link tab , the link will get created with Quality Notification which can be viewed in subject tab of Q Notification.
Regards,
Nitin

Document flow in quality notification - IDOCs visible

Hi Experts,
In document flow view for quality notifications IDocs from sales order are visible.
These idocs are Item based, so in case of multiple items of sales order numerous idocs are visible which make the document flow view more complex. Also one sales order can be changed several times, which results in to several idocs for each line.
Please suggest how can we show the Updated IDOCS only. Are there any Exits or enhancements to achive the same.
Thanks,
Sankhajeet.

Hi,
You need to take help of your technical eam to activate business work flow functionlitry activated.
Ramesh

Quality notification - more reference objects

Hello,
business need is to have quality notification with possibility to refer either production order or purchase order under one notification type.
By standard this seems not possible as:
Complaint Against Vendor references to Purchase order
Internal Problem Report references to Production order.
But in section "User-specific notification" is mentioned
A user-specific notification type has the same basic structure as the standard, predefined notification types. The screen layouts, reference objects, and tab indexes, however, may differ from those in the predefined notification types, depending on how you customize the user-specific notification type.
But I have not found a way in customizing to enable this.
Advice appreciated.
Br, Jan

Thanks for the asnwer, but I think this does not solve my problem.
In the configuaration for "Notification Header and Screen Areas" I do have
- notification header screen H500
- customized screen O550 (BADI)
and both are needed.
The BADI is used to customize refernce object screen, not reference documents screen. But my idea was to change reference document screen area in a way, that both purhcasing and production reference documents are visible in there.
I only managed to get the vendor screen by adding screen area 037 to "Extended View: Tabstrips and Screen Areas" But adding purhcase document as reference to Reference documents remains my problem.
I am kind of able to make the vendor screen visible by e.g. adding screen area 037 Partner overview screen (table control).But creating a new pop-up window for notification reference, where both options (pur ord, prod ord) would be available with copying functionality - in my opinion this requiers completely custom coding.

Vendor Return Delivery through Quality Notification.

Hi Experts,
I m doing vendor return delivery through quality notification with action box , after giving PO NO. & Material document no we are getting the following error
1) Could not create return delivery
2) Deficit of PU IR quantity 2.000 EA
For the GR based IV reversal after IR tick is not active.
Kindly suggest possible reason for the same
Thanks & Regards
Rajesh

Hi
There is deficit of Quantity i.e the quantity lying in stock is less than 2. and secondly for GR based invoice verification the IR tick should be there in PO in Invoice tab.

How to create a Return Order from a Quality Notification?

Hi everyone at SDN.
Really need some help on this issue we are having. We want to create a Return Order from a Quality Notification, ie. the document flow should be:
:: Serv. notif 000200000482
   :: Return Order 0060299453
In the SAPGUI we are able to do this by going into transaction QN02, enter the notification number and in the menu: "Notification" --> "Functions" --> "Sales Order" --> "Create Selection of Order Type". Now we select the Return Order type and the result is as wanted.
However, we want to do all this in ABAP instead. The BAPI I have tried with is BAPI_CUSTOMERRETURN_CREATE.
And the following code is used:
    ls_order_h_in-refobjtype = 'BUS2078'. "Quality Notification
    ls_order_h_in-refdoctype = 'Z5'. "Quality Notification type
    ls_order_h_in-refobjkey = '000200000482'. "Ref. Quality Notification
    ls_order_h_in-doc_type = 'ZREN'. "Return Order type
    ls_order_h_in-sales_org = 'S001'.
    ls_order_h_in-distr_chan = '01'.
    ls_order_h_in-division = '01'.
Then I add a material as well as the mandatory partner functions. When I execute the Return Order is created but when I check the document flow for the Return Order there is no link to the Quality Notification.
Any suggestions on how to do this? I have tried using FM RV_DOCUMENT_FLOW_UPDATE_U for updating the document flow but it doesn't seem to like it when I enter a Notification in there. And when I run FM RV_ORDER_FLOW_INFORMATION for the above (working) Return Order there is no Quality Notification available. So this leads me to believe that I have to update something else then VBFA (Sales Document Flow)...
I would really appreciate all the help I can get on this.
Best Regards
Niklas

anyone?

QM01 - Add Production Order field to Create Quality Notification

Hi all SDNers,
I have searched and found many threads related to my question BUT I'm new to this and I don't know how to implement in detail.
Would you please guide me step by step adding a field into a standard TCode?
My requirement is to add the Production Order field (VIQMEL-FERTAUFNR) to the Create Quality Notification (QM01) Tcode under the 1st screen in Reference Documents section of the Reference Objects tab.
The program is SAPMQM00 and screen number is 3011.
Thanks,
Khanh

Hi all,
I used the screen number 0140 in program SAPLQM03 as the initial screen before creating Notification type Q2.
Use SPRO:
Quality Management --> Quality Notifications --> Notification Creation --> Notification Type
--> Define Screen Templates --> Define Initial Screens
Then use Function Module QM03_CREATE_QMEL_WITH_WINDOW and screen 0140 above to configure.
Hope this will help others.
Regards,
Khanh

Quality Notification Customization

Dear Sir,
I am New to QM and have been assigned a task to configure QN for Customer Complaints with reference to the SD Billing document Or Delivery Document. Kindly tell me what i should do to configure the business requirements. I need customizing steps which i should take in sequence.
Regards,
Shahzad

hi
I would suggest use notification type Q1( Customer complaint) which is std notiifcation type.
Quality Notification for the Customer complaint.
FM for customer returns from Q1 notification.
Just go through one cycle of Q1 type.this will help you a lots.
Regards'
Sujit

Auto Quality Notification and Return Delivery Via Usage Decision

Hello Gurus
Need help !
I am using the Quality inspection with Material Specification.
Just an overview of my current system settings -
Inspection Type 101 for Purchased parts , My Inspection characteristics and Batch Charracteristics are linked .Batch classification is updated as a result of Usage Deceision
My Requirement -
If the Inspection lot is getting rejected , system should trigger the Quality notification and return delievery automatically .
Can someone pl help me with detailed steps for acheiving this...
Reqward points will be given immediatly for sharing thoughts
BR

Hi
Thanks for reply.
I think I missed some thing in my question
I understand that this is Standard Sap when you post the stock into Return Deilivery stock , it 'll do the movement type 122 and create the material docuement.
However My requiremnet is to get the Delivery Document number with the reference of which i can do the PGI .
I gone thru the SAP help and learnt that we can trigger the Quality notification automatically if we reject the inspection lot...But not confident "how" as never done before..that the reason i posted my query if someone has done this before..
OR
Any option to create Delivery Document when rejecting one Inspection Lot is UD..W/o Notification also will work for me..
So I am aiming to get Delivery Document not material document as our materials are WM managed...
Could some one put some light on this...
BR

Quality Notifications (QM-QN)

Experts,
I am new to Quality Management and Quality Notifications (QN).
I need to understand QN before as there is a requirement for implementing it to BI.
Pls can anyone provide:
a. A good functional writeup on how QN is structured and how it works. I have seen the help.sap but needed a precise document.
b. Underlying R/3 tables
c. Transaction codes to view notifications.
Thanks,
Jain

hi
check this path
Logistics -->Quality Management -->Quality Notification
QM01 - Create
QM02 - Change
QM03 - Display

Enhancement to automate Quality notification after stock transfer posted.

Hi PP Gurus,
Here we need to create Quality Notification (type Q2 and Q3) only when Stock of material is moved to Blocked stock through movement type 344. If the material/batch is against vendor it should open Quality notification type Q2 and if it is against Production order it should open Quality Notification type Q3.
If anybody worked on such requirement please help.
Thanks & Regards,
Abu Arbab

Hi,
The development is done using MB_DOCUMENT_BADI (which will be triggered once document is posted against movement type 344), which eventually trigger FM IQS0_CREATE_VIQMEL.
Best Regards,
Abu Arbab
Edited by: abu arbaba on Mar 20, 2009 4:06 PM

Automatic/Immediate print of quality notification after saving

Hi,
Checked numerous posts avialable on this requirement but after following the suggestion still facing the issue.
Requirement is right after saving a quality notification print should be triggered.
Following settings are in place:
In Quality Notification print control
-> Define Shop papers, Forms, Print programs (1. defined shop papers and assigned print programs 2. Assigned shop papers to notification types)
-> Define Printer ( here under user-dependent print control with wild card * entries chose Print Now option)
Thanks in advance.
Regards,
Ragahva

Hi Raghava,
If you have configured the notification print control setup correctly, then the next step to get a notification printed is to select the right shop floor paper and print it. To do that please select - QM02/QM03 => Notification => Notification
Now select the appropriate Printer and the document you wish to get printed and print it manually.
Please note that any notification type can have more than more than one Shop Floor Paper selected to be printed. If you wish to automate it based on User details, then I think you may need to work with the below exit -
QQMA0014 QM/PM/SM: Checks before saving a notification
Please note that you have to put a logic there to read the user's credentials and print the notification while saving. You can take clues form the below thread too -
http://scn.sap.com/thread/3691375
Thanks to the original contributors of the thread!!
Thanks,
Arijit

Quality Notification Docu

Similar Messages

Maybe you are looking for