Quality of an AVI is really bad

I am totally new to Premier Pro. I imported some AVI's which were created at a resolution of 800 x 600. The reason I imported them is I want to create a new AVI made up of a number of seperate AVI's with transitions between them.
The quality of the imported AVI is extremly bad compared to the original AVI after importing into Premiere.
I then imported the same AVI into After Effects and the quality was nearer the quality of the original AVI.
1. Can anybody tell me why the quality of the AVI's are degrading.What can I do to keep the same quality as the orriginal AVI
2. Which product should I use Premiere or After Effects
Thanks

Glad to hear your problem is solved.
>Do you use a codec that you would recommend ?
To transport your video from 3ds Max to PPro I would suggest to give
Lagarith
(free-/donationware) a try. Lagarith uses
lossless compression. Although the files will be quite a bit larger than the M-JPEG ones the video will be free from any compression artifacts or quality loss right until the moment you are ready to export to the delivery format.

Similar Messages

The quality of my videos are really bad after export

during export there are so many options to choose from and me being a caveman when it comes to computers have a hard time understanding what things i need for the best quality video
btw i am using videos from OBS not footage from a camera or anything
i have an okay computer atleast that is what my friends say
if you need the computer info just ask and i will happily help but remember to talk to me like a child when explaining any solutions for the quality
please i really need help

have a hard time understanding
Be sure to look up the definition of every word you don't fully understand. Never read past a word you don't know the meaning of, get it defined. And it's not always just the technical words people have a hard time with. A good rule of thumb is that if you can't come up with a definition in three seconds, you really need to look it up. I recommend the following site:
OneLook Dictionary Search
Another tip is to learn things in the proper sequence. It makes no sense to learn how to use a camera's iris if you don't even know how to turn it on yet. So start at the beginning and go in order.
Finally, test out each new thing as you learn it.

Video quality in scope is really bad and dark

When I send my sequence from Final Cut Pro to Color, why does the video in the scope area come out so bad where I can barely see anything? Basically the video is nothing like the quality in final cut pro and the picture is very very dark.
When I see the tutorials online of the videos being sent to color from final cut, the quality is exactly the same and they don't do any adjustment.
Can someone please help me fix this? I work with AVCHD. Thanks!

Thanks George.
Now the quality is not "really" bad anymore, it is bad. ;-)
The quality got better, but still there is a difference between drawing shapes and cell borders. And the difference is causing problems with customers, who are demanding professional quality.
Here is a .jpg of the original Excel table. The drawing shape is the outer one, the cell borders are the lines beneath the data. Both line types are very delicat. This is how it should be.
And this is how it looks after a pdf-print with setting "high quality print" (2400 dpi).
The outer drawing shape is ok. The thin horizontal lines are twice as thick than before.
I know, it is about details. But those details make the difference between a professional and an amateur performance.
Do you have another idea, how to improve the pdf quality?
Thanks for your help so far, I appreciate it.
Roman

Quality of printout is really bad

Hi Experts,
I use the system command "print screen", to print my visual composer cockpit (only tables and forms, no charts).
Unfortunately, the quality of some printout is really really bad. It seems that VC does some scaling, in order to fit the form to the paper size. But then, the texts are distorted and hardly decipherable.
As I use BAPIs and special form layouts, I cannot use the printing capabilites of reports, as described in the famous "How To... Export Data from Visual Composer".
When I use the flash print function (right click, print...) or the browser print function (menu: file, print...) my VC application is not scaled at all and only the top left corner of my cockpit fits on the paper. The rest is ommitted...Nothing helps, I'm frustrated!
Who can help me? Any Ideas on how to print a cockpit legibly?
Thank you very much in advance,
Benni
PS: Points will be awarded, of course!

Benni,
do you hv multiple iViews on a page or all the forms/tables etc are on the same iView? if you're using multiple iViews, you can enable print on each iView and get users to minimize the other iViews on the page that are not being printed, that way you might get a decent-sized iView. also try to hv the navigation panel in a collapsed state by default, so that there is sufficient space on screen.
in addition, try to scale your iViews during design time such that when deployed they fit within the screen so that users dont hv trouble scrolling/adjusting etc..i know printing is not something done easily with VC, but hope this helps..
prachi

When I burn a dvd, it's really bad quality in black & white

When I burn a dvd, it's really bad quality in black & white.

What program are you using to burn the DVD? What is the original DVD content (another DVD disk or movie files -- what's their format?)?

Image quality really bad on exporting

after creatingt the webpage i export the file into HTML and images. But what i see is that the images are of really bad quality. How can i rectify this problem. Any help is much appreciated.
thanks in advance.

Before exporting, click on the preview button at the top of the document window, and then open the optimize panel. With the Optimize panel open, click on the slices over each of the images to try out the different image formats and compression settings. When you are satisfied with the way they will look when exported, choose File > Export.

5800 Really Bad build quality

Well I am now on my 3rd 5800 and they all seem to have really bad build quality. As others have mentioned there is a big gap along one side of the phone (top right hand side running down past the volume buttons) and in the dark light leaks out through the gap
Come on - how can anything like this be put out to the general public - this is a serious issue. If you can get one side of the phone to close properly then why didn't you get the other side to do the same?
As a product designer I know that during the design stage there are several prototypes made, parts checked etc - how could this be passed as ok?
I am seriously considering ditching the 5800 all together - for something that Nokia are classing as a premium model they really need to re-consider its quality.

This is really annoying me as well. This phone cost me a lot of money and it's the worst build quality/design I've ever seen.
People talk about dust getting in through the gap but what worries me is that it is much more likely to let in moisture! I've checked with Vodafone and moisture damage is NOT covered by their warranty. So unless Nokia admit that it's a manufacturing fault you'll have to pay for the repair youself.
Of course,
1) If their wasn't a gap down the side of the case water wouldn't get in so it wouldn't need repairing!
2) If the phone gets water damaged it's almost certainly going to be classified as "beyond economical repair"!
Come on Nokia, admit it's a manufacturing fault, recall all the phones and repair them free of charge.
Message Edited by colin5800 on 09-Mar-2009 05:50 PM

Ever since I downloaded iOS 7 my music and video sound has been really bad quality what should i do

Ever since I downloaded iOS 7 my music and video sound has been really bad quality what should i do??

I had the same problem on my iPad v2 IOS 7. But it sorted itself after a hard reset (power and home button) followed by a soft rest ( just power) . I lost all sound at this point. Then restarted again with a hard reset.
Hope that fixes your iPad v2
Mo

I RECENTLY BOUGHT SOME SONGS FROM ITUNES BUT THE SOUND QUALITY WAS REALLY BAD. I'M NOT SURE WHAT TO DO?

i bought some songs yesterday that i really liked but when i was listening the sound quality was really bad. it just ruined the song almost. i am not sure what to do about it.

You might try listening to the songs from other devices or systems to make sure it doesn't have to do with your computer specifically.
Also try to preview the songs from your computer and any other devices if possible to see if the preview sounds any different.
If you're still having issues you should contact iTunes support:
http://www.apple.com/support/itunes/
Once you get there, choose Music Purchases from the list, then choose Music Purchases again, and it will let you Email them directly about the issue.
Give them the names of the songs you bought and as detailed a description of the audio issue as possible.

Why does it look really bad quality when i plug my 13in macbook pro to my 42in samsung tv?

i bought this rocketfish hdmi cable to plug my 13in mac pro to my samsung plasma tv so i can watch netflix and youtube..and for some reason the picture quality is really bad. everyone says it looks great in theirs but why not mine? i put it at the highest resolution which is 1080i. Can i get any help??

it should be 1080p unless your's is only i
netflix and youtube need to have the best picture turned on for it to look good. Some are in 1080p but other only max out at 240p.
if you are in mirror mode, you are unable to change the screen size to the tv independently of the mbp.
What you should try to do is see if you have mirror mode turned on in system preferences> display>arrangement.

Poor Quality Export to AVI

Hi im a newcomer to Premier Pro and need some help in adjusting my settings for exporting my video.
The video in question is made up of 5 seperate videos (created from still jpegs with ImageVideoMachine at 1024x768 with 24fps and 1080HD Profile). When I view these videos seperately they are good quality and do not have any problems. However after i imported them to Premier Pro and added an audio track in the background and a small bit of text the quality after export is really bad in places.
I have tried lots of different settings in the export but just cant seem to get it right. The main problems that seem to occur is when the camera moves quickly from one scene to another and it seems to get very blurry and pixelated and sort of like half the scene is catching up (hope this makes sense!).
The entire video is only 4 and a half minutes long so I am not too worried about the size of the file. Any help would be greatly appreciated as im at a loss what to try next and the poor quality of the video takes away so much from my hard work in creating the presentation.
Hoping you can help
Alan

Just as further information for anyone who can help. These are the properties of one of the five .avi files I created using ImageVideoMachine. As I said these play at a good quality and without any pixelation of blurriness.
1.avi
Type: AVI Movie
File Size: 32.6 MB
Image Size: 1024 x 768
Pixel Depth: 1024
Frame Rate: 24.00
Total Duration: 00:00:41:21
Average Data Rate: 797 KB / second
Pixel Aspect Ratio: 1.0
AVI File details:
Contains 1 video track(s) and 0 audio track(s).
Video track 1:
Size is 32.58M bytes (average frame = 33.20K bytes)
There are 76 keyframes, 929 delta frames.
Frame rate is 24.00 fps
Frame size is 1024 x 768
Depth is 24 bits.
Compressor: 'DX50', ffdshow Video Codec
Now these are the properties of the best quality export from Premier Pro after I edited my video. Although this is my best quality export it is still very poor quality compared to the original videos I am using to create it.
Type: AVI Movie
File Size: 212.6 MB
Image Size: 1024 x 756
Pixel Depth: 1024
Frame Rate: 24.00
Source Audio Format: 48000 Hz - 16 bit - Stereo
Project Audio Format: 48000 Hz - 32 bit floating point - Stereo
Total Duration: 00:04:11:00
Average Data Rate: 867 KB / second
Pixel Aspect Ratio: 1.333
AVI File details:
Contains 1 video track(s) and 1 audio track(s).
Interleave: 1 : 24.00
Video track 1:
Size is 166.44M bytes (average frame = 36.10K bytes)
This movie appears to have DROPPED FRAMES
There are 28 keyframes, 5905 delta frames.
There are 91 empty frames.
Frame rate is 24.00 fps
Frame size is 1024 x 756
Depth is 24 bits.
Compressor: 'DX50', ffdshow Video Codec
Audio track 1:
Size is 45.95M bytes
Rate is 48000 samples/sec
Sample size is 16 bits
Hope this helps you to understand what im trying to do here.
Thanks again
Alan

Convertion from pdf is really bad

Hi !
First, i m pretty ignorant in making pdf form...
I need to make an interractive form from a pdf file (25 pages) given by a friend.
he gave me 2 version of the file, a 'normal' pdf and one in form version (without any calcul or interractivity).
(but it lacks 3 fonts)
I tried to make it with Acrobat :
with both version of the file,
i c'ant find all the events i need in 'Action' tab when i try to add some code on a textBox like 'change', 'docReady'...
But the way i can make the form is really good. In fact i only need to add textbox, radiobutton... i don't want to edit text.
With LiveCycle i create a new document from the pdf and i select interractive. i need to change tooltip, visibility of objects..., wich can t be done with non interractive form (if i understand correctly ?).
my problem is that the converted file is really bad, the convertion log contains a lot of errors.
and it will take me a lot of time to correct, adapt it, plus, images are pixelised ( why ??).
My questons :
Can i make interractive form without converting the document ? like with Acrobat or non interractive forms ?
Is there a way to have a source file instead of the pdf ? wich contains images, fields... so there will be no convertion.
Thanx for reading

Thanks George.
Now the quality is not "really" bad anymore, it is bad. ;-)
The quality got better, but still there is a difference between drawing shapes and cell borders. And the difference is causing problems with customers, who are demanding professional quality.
Here is a .jpg of the original Excel table. The drawing shape is the outer one, the cell borders are the lines beneath the data. Both line types are very delicat. This is how it should be.
And this is how it looks after a pdf-print with setting "high quality print" (2400 dpi).
The outer drawing shape is ok. The thin horizontal lines are twice as thick than before.
I know, it is about details. But those details make the difference between a professional and an amateur performance.
Do you have another idea, how to improve the pdf quality?
Thanks for your help so far, I appreciate it.
Roman

Why do the photos in my first InDesign project look really bad?

Why do the photos in my first InDesign project look really bad? Noticed as I "placed" them, some PDFs or JPEGs (not photos, but PDFs converted to JPEG) looked pretty distorted. Went ahead with the 60+ page project, converted to PDF, sent to client. He converted to a flipbook to proof and really didn't like the photos. Here's the irony. Upgraded to InDesign for this client. Was using Publisher as a standby until I could afford InDesign. Signed up with the Creative Cloud because job was overwhelming Publisher.
I started the job without a whole lot of knowledge (or patience for the tutorials) and figured I just wing it (and get InDesign for Dummies). Am thinking somethingw as screwed up in the initial setting up of the job. So how do I figure out if this is the issue and can I fix it without redoing all 60+ pages. If anybody has an answer, please let me know.

helpmemama wrote:
Why do the photos in my first InDesign project look really bad? Noticed as I "placed" them, some PDFs or JPEGs (not photos, but PDFs converted to JPEG) looked pretty distorted. Went ahead with the 60+ page project, converted to PDF, sent to client. He converted to a flipbook to proof and really didn't like the photos. Here's the irony. Upgraded to InDesign for this client. Was using Publisher as a standby until I could afford InDesign. Signed up with the Creative Cloud because job was overwhelming Publisher.
I started the job without a whole lot of knowledge (or patience for the tutorials) and figured I just wing it (and get InDesign for Dummies). Am thinking somethingw as screwed up in the initial setting up of the job. So how do I figure out if this is the issue and can I fix it without redoing all 60+ pages. If anybody has an answer, please let me know.
Ok, first image on your indesign page or any other program for that matter are still images, they are no longer pdf's, jpg's, psd's, etc. Once they load into a program, the file format is no longer relevant until you save again. Onl;y on your drive is the format relavent.
Second, if you can help it, never use jpg's until you are completely done and will be sharing a jpg. Jpg's are a lossy format are are not the best for preserving quality on your drive. Each time you open a jpg, and save a jpg more data is lost, as that is how that format compresses the data, by throwing it way for ever.
Third, the problem may not even be with you, it could happen when that person created a flipbook. That is an unknown varible, one which could make you look bad when it had nothing to do with you.
Fourth, Pay attention to the pixel dimentions of your images, the higher those values are the better the quality. Scaling can and probably will reduce that quality. If you can, it is better to hide parts of the image by cropping with a frame than it is to scale the image. you can scale, but pay attention to it.
I will stop there for now, as some of what I wrote is based on assumtions. That normally does not work out too well.

Really BAD 3D Performance on Intel iMac

Hello all,
I have like 2 weeks with a new Intel iMac 20" (C2D 2.4Ghz / 256MB ATI Card / 1Gb RAM) had no problems so far, until today. I decided to install Vista thru Boot Camp (I know I should have installed XP, but Vista is all I got) for games, so I downloaded a few demos to check if it was any good with 3D gaming, installed GRAW2 and NFS Most Wanted, these are not cutting edge games and I tought they should run perfectly smooth as my iMac is superior than recomended specs for those games, well they didnt run well, not even playable at even low resolutions (640*400 / 800*600) the games looked all jerky and slow, really painfull performace, I tought, well, maybe the drivers didnt installed correcly, reinstalled drivers, nothing, erased and reinstalled Vista and drivers, still same problem, even tried games under OS X, HALO Universal and DOOM 3 Demo, again not cutting edge games, they run really bad even on low settings, and I mean painfully slow, so this is not only on Windows.
This is not acceptable for a computer with these specs, even my 2 year old PC (AMD Athlon 3400+ / 1Gig RAM) with Vista and integrated graphics runs DOOM3 and F.E.A.R. at playable levels on medium quality settings @ 1024*800, its not even fair.
My Mac OS version is 10.5.2 and all current updates have been installed, the problem seems to be only with 3D graphics in both Windows and OS X as it plays Quicktime 960p HD videos and all other graphic media as smooth as butter on a hot pan. Does someone else has this issue or knows what to do to solve it?... It is really frustrating.

You probably did not install the drivers for the video hardware (on the Windows side).
My Mac OS version is 10.5.2 and all current updates have been installed
That would have nothing to do with 3D performance when booted into Windows.
Here's the forum category for Boot Camp users. You should also ask your question there.
http://discussions.apple.com/category.jspa?categoryID=237

Broadband speed has been terrible with really bad ...

Hi, for the past few days i have been receiving a really bad broadband speed, its varies from 0.90Mbps to 5Mbps normally i would be getting around 3.50mbps to 5mbps but lately its been terrible constatly changing. I tested my speed on speedtest.net and was getting a ping of around 100 + and sometimes it will go down to 50 ish. I have contacted BT the other day and they said they would get back to me today but they have not. Also for the past few days my connection has been dropping but since contacting BT that has stopped but im still getting slow download speeds to the point i cant even watch a YouTube video on a low video quality.
What i want to know is why i am getting so slow download speeds and a very unstable connection?
Is there a problem in my area? I have no changed any settings messed around with any cables to make my connection drop.
Thanks for any help.

Can you also post the full results from http://speedtester.bt.com/
Have you tried connecting to the test socket at the rear of the master socket
Have you tried the quiet line test? - dial 17070 option 2 - should hear nothing - best done with a corded phone. if cordless phone you may hear a 'dull hum' which is normal
also you could try the hints given by poster RogerB in this link they may help http://community.bt.com/t5/BB-in-Home/Poor-Broadband-speed/m-p/14217#M8397
Then someone here may be able to help and offer more advice.
This is a customer to customer self help forum the only BT presence here are the forum moderators
If you want to say thanks for a helpful answer,please click on the Ratings star on the left-hand side If the reply answers your question then please mark as ’Mark as Accepted Solution’

Quality of an AVI is really bad

Similar Messages

Maybe you are looking for