Quality of copy & paste graphs into webpage

I have created a simple spreadsheet with several bar graphs. I can copy and paste each graph into a web page, but the "X" and "Y" number labels are blurred and jagged,(poor image quality) unlike the original spreadsheet. I can, however, copy and paste the graphs with good quality into both pages and keynote. Even when I copy the graphs from either pages or keynote, the resolution drops when I import it into the webpage. Is there a different way to save or export the graphs with crisp axis numbers (higher resolution) and insert it into a webpage?

You may also notice that the chart title and legend will be missing if you copy/paste to non-iWork applications. The jaggies sounds like like your web publishing application is converting it to a jpg and you are enlarging it from its original size.
Here is what I do when I want to paste a chart in a non-iWork application and I want the title and legend too: Print the page (cmd-P) but don't actually print it, choose "Open PDF in Preview" from the PDF button in the Print window. In Preview, use the lasso tool to select the chart. Copy. Paste it to where you want it.
I doubt this will remove the jaggies in your web page, though. You may have to enlarge the chart before copying it (or before doing the Open PDF in Preview routine) so that it is large enough to not have to be scaled up in your web page. Or figure out how to get your web page to accept it as a PDF, in which case it will scale without jaggies. Or save from Preview as a jpg with high resolution.

Similar Messages

Copy/Paste images into Contribute CS3

We have been copying and pasting images from Word Documents
in Office 2003 into Contribute CS3 at my organization when
developing content. We have been able to copy/paste images from
Office 2003 and other programs like Paintshop Pro and SnagIt.
Since upgrade to Microsoft Office 2007 all image copying and
pasting has stopped working.
Is there a known issue with this?
Does anyone else have Office 2007 installed and is able to
copy/paste images from a Word Document into a page in Contribute
CS3?

It appears that the problem only occurs if you are copy and
pasting from something that hasn't been saved yet.
In Word I inserted an image from my hard drive and tried to
copy/paste it into Contribute and that failed. I then saved the
Word Document to my hard drive, re-opened it and was able to
copy/paste fine.
Power Point, Snagit and Pain Shop Pro appear to have the
problem even if it's been saved first.
I was able to copy/paste an image from a Word Doc and
PowerPoint into MSPaint just fine. I was also able to copy/paste
between Office applications with out any problem. Snagit could
copy/paste into Office just fine and MSPaint.
This problem appears to be specific to Contribute CS3 but
only from certain sources.

I made a video series on one time line and now want to copy paste sections into other tiemlines so I can separate the series into distinct videos to upload. How do I get new timelines? When I go to new event it asks for import footage.

I made a video series on one time line and now want to copy paste sections into other tiemlines so I can separate the series into distinct videos to upload. How do I get new timelines? When I go to new event it asks for import footage.

You seem to be new to this software, so I highly recommend that you take some time to learn it using some great tutorials available online - it will pay off to invest the time, if you follow through, for example the great (and free) introductory tutorial at izzyvideo.com.
This is an amazing piece of software, and you'll have a lot to learn, but it's well worth it.

Copy/paste images into pages within sharepoint online?

There seems to be a workaround to use RadControl for this. (http://social.msdn.microsoft.com/Forums/en-US/655c080f-ec1e-4e69-b082-d35973ee426a/copy-and-paste-for-images-in-sharepoint)
However, I don't think we can deploy custom app/binaries onto sharepoint online.
Is there other way we can easily copy/past images into pages?
Thx

you cannot paste the images into sharepoint pages directly, Images cannot be rendered as HTML so cannot be pasted.
You have to upload the images into SharePoint then insert it on the pages /places you want.
or other work aorund buy the 3rd party tool which you mentioned.
Please remember to mark your question as answered &Vote helpful,if this solves/helps your problem. ****************************************************************************************** Thanks -WS MCITP(SharePoint 2010, 2013) Blog: http://wscheema.com/blog

Copy/paste images into pages within sharepoint cloud 365?

There seems to be a workaround to use RadControl for this. (http://social.msdn.microsoft.com/Forums/en-US/655c080f-ec1e-4e69-b082-d35973ee426a/copy-and-paste-for-images-in-sharepoint)
However, I don't think we can deploy custom app/binaries onto sharepoint 365.
Is there other way we can easily copy/past images into pages?
Thx

Hi garynguyen,
premise doesn't provide this kind of oob function to copy and paste the image into SharePoint page directly, you may develop your own solution (or use third party solution) to ahcieve this goal.
For Office365 SharePoint online question, we have a dedicated forum as below, you can post there for a better assistance with more experts regarding this Office365 issue.
https://community.office365.com/en-us/f/154.aspx
Thanks,
Daniel Yang
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact [email protected]
Daniel Yang
TechNet Community Support

Trying to send copy/pasted content into a mass text message

I have composed a message (some copied and pasted from an online bible) (and also commentary that I add to it) and saved it as a draft in my yahoo email on my computer. I save it as a draft. I open the draft on my iPhone 4. Then copy/paste content into a text message to send to my congregation. Many of the recipients of the text get duplicate messages with no/or partial content. I have contacted my carrier and I am fully set up to send receive both sms and mms.
What could be the cause of this?
How can I fix it so that the receivers of my daily message get it properly?

When i create a message on my iPhone4 and save it into notes. it goes to my draft ( Mail ) on my computer. That tells me that there is no difference in where i create the message at. But between the copying and pasting i'm losing or something is being changed. Some of my friends are getting multiple messages and some are getting blank pages. We all have different carriers. ( T Mobile, Sprint,Verzion ) I'm waiting on another phone so i can use both of them to see if i can get my messages out

Add maze lock and copy paste option into asha 305

I want to suggest to add maze lock and copy paste option into new software update of asha 305..

i have nokia asha 305 the best phone but it the version 07.42 dosent support sum whatsapp features like copy paste and sum other features like maze lock nokia company updater plz have an upadte of noka asha 305 nd install everything tht is requierd by the phoneeeee plzzzzzzzzzzzz..........................

Copy-Paste ranks into a column

Hi, I would like to copy a ranks of 10 cells and paste it into a column.
Thank you

Hello
Enter the search tool of this forum and search for the keyword "transpose".
Yvan KOENIG (from FRANCE dimanche 17 février 2008 19:27:57)

Copy & Paste data into Planning form in Workspace 11.1.2.2

Hi there!
I'm dealing with a weird problem with Planning 11.1.2.2 over workspace. I cannot paste copied data into data forms (whether I copy from an Excel sheet, a file, or another cell of the same form).
However, when I access Planning directly through :8300/HyperionPlanning/LogOn.jsp (old-styled Planning), pasting data works fine.
I tried using Ctrl + V and menu buttons, and didn't work.
Thanks in advance!

Hi,
Not sure which web browser you were working on, but this is from the 11.1.2.2 Known issues for Planning
12360405 -- With Firefox, you cannot copy and paste data from Microsoft Excel into a Planning form.
Hope this helps..!!
Thanks,
hyperionEPM
Please mark answers as helpful or correct for others to find them easily.

Copy 3D graph into other 3D graph

Hello,
I have a 3Dgraph(ActiveX) and I want to copy the data inside to other 3DGraph, but I don't know how. You can say I can replot the second graph with the data I've ploted in the first one, but calculate all XYZ coordinates is time-consuming operation, so I think it would be better to copy the data directly from the graph.
Is there a solution?
I made a simple example to demonstrate the way I tried....
Thank you all for help.
I'm using LW 7.1
LV 2011, Win7
Attachments:
graph_copy.vi ‏70 KB

2 Evan: I have array 5x18000 elements-compute this array takes about 10sec, because process of generation consist of many iteration. So this is the reason why I don't want to generate them again. Another reason is that it is array of double and it takes a lot of memory to keep it.
2all: I think my example wasn't good.
I have have small 3D graph (only a preview) on first VI and I want to to see him in detail (bigger ) on second VI-after button click!!!.
Because the reasons meantioned above I don't want to compute the vectors again.
If my problem is still not clear the situation is very similar to the situation when you want to write the data from 3Dgraph to file. When using XY Graph it's easy to use property "Value" and just unbundle it-->you have the X and Y vector than you can write them into file.
Uff is it clear yet? Maybe it's quite easy but I don't see it :-(
Thank you for yours time.
LV 2011, Win7
Attachments:
master.vi ‏149 KB

Copy/pasting content into one project from another.

When I copy pictures from one project into another, it just leaves me with black pictures for the duration of the other ones...how do I fix this?

Thank you. Just from the curiosity, why saving a final project under a new name?

Copying & Pasting graphs

Hello --
I'm using LabVIEW 4.0 on the PC and there's one feature that I know is
there on the Mac version that I'm missing a lot: the ability to cut and
paste vector graphics from the application window. I know I can get
bitmaps with [ALT] + [Print Screen], but I'd like to be able to deal
with only part of the window...
What I'm really interested in doing is using the x-y and waveform
graphs to format my data quickly and then getting them out of labVIEW
in a format I can use in a paint program (currently Canvas 5).
I've experimented a bit with printing the output to an EPS file, and
that works as far as it goes, but it's not as elegant a solution as was
possible on the Mac.
Does anyone have a better idea as to what to do here?
Is it really
that weird to want more than a bitmap from my code?
I suppose the ultimate solution would be to write a VI that outputted a
PostScript (or some other format) vector graphics file, but that would
take more work than I think my boss would be happy paying me for ^_^.
Thanks in advance,
Dan
Sent via Deja.com http://www.deja.com/
Before you buy.

> I'm using LabVIEW 4.0 on the PC and there's one feature that I know is
> there on the Mac version that I'm missing a lot: the ability to cut and
> paste vector graphics from the application window. I know I can get
> bitmaps with [ALT] + [Print Screen], but I'd like to be able to deal
> with only part of the window...
>
> What I'm really interested in doing is using the x-y and waveform
> graphs to format my data quickly and then getting them out of labVIEW
> in a format I can use in a paint program (currently Canvas 5).
>
> I've experimented a bit with printing the output to an EPS file, and
> that works as far as it goes, but it's not as elegant a solution as was
> possible on the Mac.
>
> Does anyone have a better idea as to what to do here? Is it really
> t
hat weird to want more than a bitmap from my code?
>
> I suppose the ultimate solution would be to write a VI that outputted a
> PostScript (or some other format) vector graphics file, but that would
> take more work than I think my boss would be happy paying me for ^_^.
>
The reason its there on the Mac, is that the Mac has/had a very robust
format for vector graphics, the PICT format. The PC has had bitmap formats
and this thing called metafiles, which were pretty limited in what they
could contain. For this reason, LV didn't support output of vector
graphics on the clipboard until MS released the enhanced metafile format
or EMF. I'm not sure that LV4 has support for them, it may have been
introduced in LV4.1, but the most important piece is the OS. LV definitely
supports EMFs on Win NT, but due to the number of workarounds to be able
to support them on Win95, we reverted back to using bitmaps.
This means that the first thing to do is try this out on an NT computer.
If it do
esn't work, then get the evaluation version of a later version
and see if it works for what you want.
Greg McKaskle

Copy-Pasting paths into Photoshop

I've made a vector-only AI file that I need to import into Photoshop. But when I press Ctrl-V in Photoshop, nothing happens. If I try to drag the path from Illustrator to Ps, I either get a message saying "The operation cannot complete because of an unknown error [usBt]", or Illustrator will just crash immediately. In fact, sometimes the error message pops up as soon as I switch the window from Illy to Ps, before doing any paste operation.
I've tried playing around with different combinations of clipboard options in Illustrator, but nothing helped.
For now, apart from trying to resolve this error, I'm also looking for an alternative method to convert AI paths to Photoshop. Any help would be appreciated.

Additional info:
When Illustrator crashes on drag-drop, the last message it displayed was "Converting dragged items to EPS (AICB) format."
Also, I realized that my Illustrator can't save in PDF or EPS either; I get a "Can't save the illustration." message.
I've done a reinstall (Ps and I) but the problem persists.
I'm running CS3 Design Standard, with the latest updates AFAIK, on WinXP SP3.

Unable to edit/copy/paste anything into the Comments section...

With 4 ipods and a wide variety of musical taste, I have a very extensive library of songs that are assigned to one or more playlists by the name in the comments section. This has been very useful ... up until now. I no longer can edit the comments section of the songs on my main library. any idea why not and how can I fix this? Having worked like a charm in the past, not sure if this was because of a computer move to Windows 7 or the lastest iTunes update. any assistance would be appreciated!

this worked: thanks Sue.Cat:
I seem to have fixed the problem for me though by doing the following:
- open 'properties' on the highest level folder you want to change attributes
- click 'security' tab
- click 'advanced'
- click 'change permissions'
- click 'add'
- enter 'Everyone' in the 'enter the object name to select' dialog box
- click 'check names'
- click OK
- click 'full control' in the 'allow' column
- click OK
- click the box (turn on) 'replace all child object permissions with inheritable permissions from this object'
- click OK
- confirm any 'are you sure' type messages that pop up along the way
and you should be set! Whew!

Can't copy & paste image into email using Safari

Just what it says. If I use firefox, the image (not just the link) appears in the reply text box of the email I'm writing.
if I use Safari, all I get is a little blue box with a question mark.

I don't use GMail, so I can't answer your question. Maybe someone else can. Try the GMail user forums.

Quality of copy & paste graphs into webpage

Similar Messages

Maybe you are looking for