Quality Operation confirmation only for specific grid Values

Hello,
When I am doing in process inspection for a specific routing for say the 0040th operation, upon confirmation I would like to confirm only part quatities for a specific grid value alone. But there are certain issues as follows:
1. When I am specifying the grid values, the same is not automatically copied to the yield quantitites field for confirmation. Moreover the system does not even propose what is the quantity to be confirmed. so the user has to remember and feed in the quantities.
2. When I am trying to save the partial quantites as per the grid system is automatically raising a partial lot. Why is system doing so? I am not able to figure out why?
Any suggestions on this is greatly appreciated.
Sincerely,
Aji Kurian Mani

Hi Aji Kurian Mani,
I am not so sure which transaction code you are using for confirmation. If at all you are willing to perform this through QA32 its feasible.
1.     All you need to do is maintain inspection point at header level in routing
2.     At operation level double click on control key. Scroll down up to quality management view.
3.     There in confirmation menu choose valuation and confirmation.
4.     You may try using different combinations there as a result of which when you valuate the results for inspection point, system throws a window to input yield and scrap.
Regards,
Anand Rao
Edited by: Anand Rao on Aug 31, 2011 11:49 PM

Similar Messages

Showing Sub-Totals only for Specific Column in PowerView

Hi,
Is there a way of showing the sub-totals only for specific columns in a PowerView Matrix?
I am only aware of showing the sub-totals for all or non of the columns.
Thanks and Regards,
Justin

Hi Justin,
According to your description, you want to get sub-totals specific columns within columns group. Right?
In this scenario, we can use IIF() function in expression to achieve your goal. The expression will only return the total value when the column value is a specific value, otherwise we can make it return nothing. Try the following expression:
IIF(Fields!Column.Value="[specific value]",Sum(Fields!Total.Value),nothing)
We have tested this scenario in our local environment. Here are screenshots for your reference:
Reference:
Expression Examples (Report Builder and SSRS)
If you have any question, please feel free to ask.
Best Regards,
Simon Hou

Cellular data only for specific apps

Is there a way by which i can enable cellular data only for specific apps? Lets suppose i want only mail and viber to run on cellular. So how do i enable cellular network only for viber and mail

Hello all,
I have been using the iPhone 4S for about a year and I never had problems untill a few days back. Since about a week, my 3G settings for applications installed automatically reset.
Path >> iPhone screen >> Settings >> Mobile(Cellular) >> Use Mobile Data For >> "List of all apps installed"
Against each application, you have an option to either enable / disable the mobile data usage:
Eg:
App Store          (swipe left to disable || swipe right to enable)
Contacts          (swipe left to disable || swipe right to enable)
Facebook          (swipe left to disable || swipe right to enable)
Facetime          (swipe left to disable || swipe right to enable)
Weather          (swipe left to disable || swipe right to enable)
You Tube          (swipe left to disable || swipe right to enable)
etc...
Problem:
If I don't want You Tube to use mobile data, I would normally swipe left to disable thus the application will not start / stream any music if its on 3G/4G. Since a few days, whenever I disable the option for any app... go back to the main screen and recheck the settings, I see its enabled again!
The error I see when I start the app is:
MOBILE DATA IS TURNED OFF FOR "YOU TUBE"
You can turn on mobile data for this app in settings
<Settings>     <OK>
When I go back to settings... I see the option is enabled.
Now I dont know what and how this happened all of a sudden. I have tried resetting the network settings for my iPhone, and it has not helped me.
My iPhone is updated to OS 7.0.4 and all apps are updated.
Anyone can help me on this error and how do I fix this?
FYI... I have no problems connecting to WiFi at all!

Using manual IP address only for specific networks

For my home network I use DHCP with manual address because I have to forward some ports specifically to my computer. However this causes problems when connecting to other networks. For some reason this setting stays active even when using other networks. Therefore, I can't connect to say my school network because the setting has to be set to plain DHCP. Is there a way to use manual IP address only for specific networks?

System Preferences > Network > Locations and add a location for your home with its manual settings. Add a location for other DHCP locations. Then when you want to connect at another DHCP location select that location from your locations dropdown.

Pixel counts for specific RGB values

Can Photoshop CS4 find pixel counts in an
image for specific RGB values? Where would
you input these RGB values and would you see the pixels highlighted and totaled?

Hi Zeno:
Thank you very much for your response!
Your directions work very well for a single image. I have an entire series of images and was wondering if I could just enter a specific set RGB values some where and see a total pixel count for each one of them.
When I go to foreground color and enter the RGB values there and then set the color range to zero and press OK, I get a Warning: No pixels were selected message.
Any additional advice that you have would be much appreciated.
Thanks, Bretzfrog

SCCM 2012- How to limit a collection membership only for specific count of machines

How to limit a collection membership only for specific count of machines

As I said you can use where SMS ID like %1 and see how many machines that gets you. If it's not enough do where SMS ID like %1 or SMS ID like %2. Keep adding a digit until you get ~5000. It won't be perfect though.
John Marcum | http://myitforum.com/myitforumwp/author/johnmarcum/

SCOM 2007 - OPerations console only for exchange servers.

HI All,
There is s requirement in my organisation where-in we have to create monitoring /operations console , only for exchange servers is that possible? If yes, can some share the information on the same also, this needs to be done in SCOM 2007 R2.
Rgs,

Hi Naren,
If your organisation does not have any restrictions in providing the Administration acces, Then i would sugges you import the Exchange 2010 / 2013 management packs.
Download link: http://www.microsoft.com/en-in/download/details.aspx?id=692
http://www.microsoft.com/en-in/download/details.aspx?id=39039 ( Exchange 2013 M's not compatible with SCOM 2007 R2 as per my understanding)
Post importing,
Go to the operations console and SCOPE the objects only to Exchange 2010 Monitoring target, So that the console will only display you the Exchange 2010 management pack alerts.
Once in a while remove the SCOPE and clear the other alerts as well and then re scope it back.
Or if you are only monitoring Exchange 2010 then no need to SCOPE at all as there will be no other management packs to throw alerts in SCOM console.
If security is your concern then Make a normal operator account like the below and tell them to SCOPE the objects to Exchange 2010 or give them access to the Web console where the administration tab will be unavailable at all times.
Security scope: Make them a member of This group for limited / only monitoring access:
I Admin access is necessary, Then make them a member of Operationsmanager Admins on the 1st group of the screenshot.
Gautam.75801

Quality operation confirmation check point

There are 3 operations in routing, out of that 2nd operation is quality check.
If QA person does final confirmation for 2nd operation by accepting 9 nos out of 10 and scrapping one number due to quality issue.
During final operation confirmation and GR for production order, system should allow only for 9nos not 10.
Is this possible. Please advice

Aforesaid is exit in Order Cofirmation in Co11n.You have to build logic for final confirmation Qty= total qty-scrap qty(in any operation).If no scrap in any operation then final confirmation Qty= total qty.
Seek help of abaper for same.

[CC] How to perform a script "foo_beforeSave.htm" only for specific site?

Since a long time I use a script for automatic text replacements which perform with each save command.
The script sits in that folder:
C:\Users\myusername\AppData\Roaming\Adobe\Dreamweaver CC\de_DE\Configuration\Commands\foo_beforeSave.htm
It works for all documents of all sites.
The source code (the regex rule is just an example) of the script you find below.
My question:
I like to perform a script like this only for a specific site.
I'm not a programmer. So I don't know where to place the script to reach that target. Or how I have to edit the source code of the script.
Is there anybody who could help me with that please?
I would appreciate it a lot. Thanks
<!DOCTYPE HTML SYSTEM "-//Macromedia//DWExtension layout-engine 5.0//dialog">

<html>
<head>
<title></title>
<script src="../Shared/Common/Scripts/dwscripts.js"></script>
<script>
function canAcceptCommand(){
    return true;
function getFileName(url) {
var index = url.lastIndexOf('/');
if (index != -1) retVal = url.substring(index + 1);
else retVal = url;
return retVal;
function runCmd(){
    var dom = dw.getDocumentDOM();
    dom.synchronizeDocument();
    var path = dw.getDocumentPath('document');
    if(getFileName(path) != 'foo_beforeSave.htm'){
        var docEl = dom.documentElement;
        var tempDoc = docEl.outerHTML;
        tempDoc = tempDoc.replace(/&bdquo;/g,'„');
        tempDoc = tempDoc.replace(/„/g,'„');
        tempDoc = tempDoc.replace(/“/g,'“');
        tempDoc = tempDoc.replace(/“/g,'“');
        tempDoc = tempDoc.replace(/”/g,'”');
        tempDoc = tempDoc.replace(/”/g,'”');
        docEl.outerHTML = tempDoc;
</script>
</head>
<body onLoad="runCmd();">
</body>
</html>

Well, the posted script is a full working one.
I just search for a way to limit the range of the script to the actual site.
Therefore it is unimportant, which regex is in the example.

VA01 Item category display only for specific order type

Hi,
I have a requirement to deactivate(display only) item category field in VA01 table item for certain order type . I tried the user exit MV45AFZZ(USEREXIT_FIELD_MODIFICATION). This is working only if the table item has a value. i.e I could able to enter an item category first and then enter the material and quantity.
So please suggest any alternative how to make the item category field(VBAP-PSTYV) column display only for centrain order type.
Regards
Aromal R

Hi,
Create a Custom Authorization Object so that you can control it for certain users. 2. Write implicit enhancement spot in the include TCS MV45AF0T_TCTRL_U_ERF_AUFTRAG_I,
FORM TCTRL_U_ERF_AUFTRAG_INIT
AUTHORITY-CHECK OBJECT 'ZITMCAT'
          ID 'ACTVT' FIELD '02'.
IF SY-SUBRC NE 0.
*    DATA: WA_COLS LIKE LINE OF TCTRL_U_ERF_AUFTRAG-COLS.
LOOP AT   TCTRL_U_ERF_AUFTRAG-COLS INTO WA_COLS.
   IF WA_COLS-SCREEN-NAME = 'VBAP-PSTYV'.
   WA_COLS-SCREEN-INPUT = 0.
   WA_COLS-SCREEN-OUTPUT = 1.
MODIFY TCTRL_U_ERF_AUFTRAG-COLS FROM WA_COLS.
   ENDIF.
ENDLOOP.
ENDIF.
Regards
Aromal R

[yaourt] Keep sources/build files only for specific AUR packages

Hi,
By default, packages are build in BUILDDIR=/tmp/makepkg, which itself usually is a virtual dir in RAM. I generally like this behaviour, so I don't wanna change the BUILDDIR variable to point to a dir on the harddisk, but for a few packages I'd welcome the sources/build dir to be kept, e.g. for *-git packages to reduce build time on consecutive updates. Is there a neat Arch-way to tell the makepkg system to use a different dir (i.e., one on the harddisk) for specific packages? It'd be even greater to be able to use wildcards as well, so I could just enable this option for all *-git packages.
And as I said, I generally like the idea of building in RAM so the trick to just let BUILDDIR point to a dir on my hdd and put a command in some shutdown-script to delete all but the directories ending in -git wouldn't be perfect
Cheers
Last edited by epinephrine (2013-01-27 16:25:17)

Oh you're right in that BUILDDIR isn't set by default. I use yaourt for building AUR packages, so this is a yaourt related question, oops. I'll ask in the appropriate forum...
Some packages are only available as git packages, and that for a good reason. Some git repository maintainers follow the good working principle to always have their master branch stable and deployable and do development and testing in respective branches to keep master clean. E.g. I maintain 2 git packages on the AUR, and there are no other "stable" options, also as git makes sense for these packages.
And sometimes you just need a more up2date version

How to authorise users only for specific GL accounts

Hi friends,
My client does not want his endusers to see all the GL accounts' balances, they want to restrict them from looking at certain GL a/cs .From my security person I came to know that we cant restrict them only for certain GL accounts, it could eithre be all or none.
I dont agree with that.
Please guide if you know anyhitng about it.
Thanks
Shefford

You can use the Authorization Group field in the G/L account master record (field SKB1-BEGRU, free text field) for this purpose. You can then use authorization object F_BKPF_BES to manage the different authorizations.
Click <a href="http://sap.ittoolbox.com/groups/technical-functional/sap-acct/authorisation-based-on-gl-accounts-727160">here</a> for more information.
Points are appreciated.
Kind regards,
Lodewijk

How to set a proxy only for specific connection?

Hi,
I am trying to make an Http request through a proxy. So my code looks like:
System.setProperty("http.proxyHost", "myproxy.hello.net");
System.setProperty("http.proxyPort", "8080");However, I believe this setting is now valid for the entire JVM. I do not want my setting to affect other programs that are running in the same JVM. The program I am writting is a servlet. So by setting the system properties I am affecting all other servlets under the same web container.
What I would like to know is whether there is a way to specify an http proxy to be used only for my connection.
It seems strange if there is no way to do this. Doesn't this raise synchronization issues as well? What if another servlet is trying to change the same system property at the same time?
Thanks in advance!

I see that the trick using
URL url = new URL("http", "myproxy.hello.net", 8080, "http://www.target.com:8000/");is not correct because it sends the proxy host as the Host HTTP header:
Host: myproxy.hello.net
instead of the final target. So it's very likely that the target or the proxy will get confused. Is there any other way of doing this?
THanks

How can I allow popups only for specific sites in Safari 7.1?

I have popups blocked by default, but need to allow them for specific sites at work. How can I do this without allowing them for all sites?

Hi ..
It's all or nothing with Block pop-up windows selected in Safari > Preferences > Security.

Marketing attribute sets applicable only for specific BP roles

Hi,
I have created Marketing attributes in CRM and assigned them to Attribute sets applicable only for Organizations.
Now they are eligable for all BPs created independent of BP role. Since I don´t want the Potential customers to have the same attribute sets as the Customers or Competitiors my question is:
Is it possible to determine which attribute sets to be available for a BP based on its BP role?
BR,
//anders

Hi,
Do we got any solution for the above mentioned error? i too getting same issue.
thanks
ARun

Quality Operation confirmation only for specific grid Values

Similar Messages

Maybe you are looking for