Quality status plant to plant

All,
Is it possible to move material from one plant to another if the status of material is in 'quality status'?
Please advise.
regards

Hi,
If QM is active , you can move that matl thro QAC2 .
If QM is not active , try with 323 mvmt type in MB1B.
You may be  having quality stock without activating insp type in material master and QM is not active for these mvt types. Then you will have quality stock without Inspection lots.
you can manage these stocks with Inventory mvt types without QM transactions.
Hope this will help you.
Regards
K.M.Arun
Edited by: ARUN KM on Feb 9, 2008 2:55 PM

Similar Messages

  • Plant to plant transfer in Q status

    Hello,
    Can someone please provide the steps to configure movement type to allow plant to plant transfer of stock with Q status? Can this be accomplished with custom movement type configuration or a user exit is available? Please advise.
    Thanks,
    avi

    Hi Avi,
    have you tried Transaction QAC2?
    I think you should be able to move Plant stor. loc. to Plant stor. loc.
    Edit: You will have to make sure that QM has been set up for the receiving plant as well.
    More information can be found [here|http://www.aq33.com/quality-management/Articles-005080.html].
    //Magnus
    Edited by: Magnus Karlsson on Nov 14, 2011 11:05 AM

  • Stock transfer between plant to plant in blocked status

    Hi Gurus,
    Can anybody know how to use some mov. type to transfer restricted status between plant to plant?
    Many thanks in advanced.
    Luiz Geraldi

    Luiz,
    You cannot move 'blocked' or 'restricted' stock in this manner. This is not supported in ECC 5.0 and I would not think ECC 6.0 would be any different in this regard as this is a basic rule within standard SAP although I would think that in certain situations it would be beneficial to be able manage this in a simple move. 
    - As others have correctly pointed out, you have to change the stock status to 'unrestricted use', transfer/receive it (either using mvt 301, 303/305, 351/101, 641/101, 643/101 etc depending on the stock transfer mechanism used between the plants) and then finally change the stock status back to 'blocked'.
    - Another option would to be to post an inventory adjustment using mvts 701/702 in both the plants and then change stock status in receiving plant to 'blocked'.
    - Design a custom ABAP program to perform the sequence of movements in a single transaction. I think it would be important to get the timing right to avoid incorrect booking of stock.
    - The movements could be also be linked in a single transaction using a workflow solution although I am not sure how simple or complex the solution might be.
    Unfortunately, the quantity strings associated with movement types are hard-coded by SAP. So, it would not be possible to achieve this move using a custom movement type without any modifications.
    Hope this helps.
    H Narayan

  • Missing Part list for Plant to Plant Purchase order

    Hi,
          I need the following requirement in CO24,
          In CO24 its shows the missing parts for Sales order, similarly we want the missing parts list for Plant to Plant Purchase order in the same report. Also the report,
    1.It  should not consider the Planned order for a sales order.
    2.It should not consider the planned order which can be convert into purchase requisition.
    3.The procurement type should be "E" or "X".
    Kindly guide me is there any standard layout changes in available or any development we have to do.
    Thanks
    Muthamil Murugan.G

    Hi Purushothaman,
    If you have the following settings in OPJK:
    Plant                 XXXX
    Order Type       XXXX
    Availability Check    2
    [X]Status Check
    [X]Check material availability when saving order (may not need)
    Checking Rule        PP PP checking rule
    Component Check Type    ATP check
    Release material     2  Release permitted despite missing parts
    Then in COHV you try to mass release the order with the following parameter:
    List: Order Header
    Selection: Your selection criteria
    Mass processing:
    Function: Release
    Max. No.of Processes 99
    Save Log: Always
    Release control order: Collective Order Release
    Then after the order is released, you can find the missing part list of that order in CO03 menu path:
    Goto->Missing Parts->Missing parts list
    Hope it helps.
    Regards,
    Rachel

  • Customization for Plant to Plant transfer

    Hi Everybody !
    There is a requirement saying that the system should request Incoming Certificate for the GR which is based on a Transfer Order(i.e. Plant to Plant transfer).
    From the answers to my previous query I know that standard SAP does not supports this. So can anyone suggest any config change or ABAP developement which makes this possible ? Please give a detailed answer so that I can follow that and make this happen in my system.
    Regards,
    Manish.

    As stated, the system doesn't support the COA requirement when your not treating the plant as a vendor.
    1) Why are they requiring a COA anyway?  There is no business benefit to that.  In every client I've worked for we have done away with these.  It was common practice at one time when plants had separate quality systems and business systems.  But with all plants on one SAP system, data can be accessed for any plant.  If the receiving plant needs to send out COA's they should be generated by SAP so there should be no need to have a hard-copy. 
    There is no ISO or GMP rule that these type of shipments require COA's.  In fact, when all the plants are on the same system, they should discourage it.
    2) if you really want to check for a COA, include the check as a pass/fail qualtitative characteristic as part of an 08 inspection lot.
    Craig

  • Issue with Plant to Plant Transfer Mvt type 301

    Hi,
    I'm trying to do a Plant to Plant Transfer using MB1B/MIGO,mvt type 301, from a plant / Storage location which is NON HU managed to a plant / Storage location which is HU Managed, I'm getting this error,
    Message No : VL296.
    HU cannot be delivrd from plant XXX stor. loc. XXX to plant YYYY stor. loc  YYYY
    Has anyone come across this error ? Any solutions?
    Many thanks
    Feroz

    Hi Feroz
    In HU-managed storage locations, materials can be managed in HUs only. Mixed stock made up of packed and non-packed materials within the same storage location are not supported. HUs can also be managed in interim storage types.
    if you want to use 311 to move the material already in stock, but in a non HUM Storage Location and you want to transfer those materials into a HUM Storage Location 304.  If this is the case you can use the transaction VLMOVE with the destination plant and storage location. Before that you have to create the HU with the transaction code HU02 Storage location: where the material is and the status: in stock
    please refer to the below link for additional details
    link[http://www.sap-img.com/sap-hu.htm]
    Regards
    Vikrant

  • Transfer Posting of Restricted stock Plant to Plant

    Hi,
    How to do transfer posting of restricted stock Plant to Plant
    Kunal

    HI
    One step stock transfer from one plant to another is 301 movement type.. Remember the stock should be in unrestricted use. If it is in quality and or blocked the same will not work
    2 step process is 303 and 305
    From Stock transfer order Documnt type UB with item category as U. Movement type used is 351 and 101

  • Return procedure in STO plant to plant with billing(single co code)

    Hi,
    I'm doing STO plant to plant with billing in one company code.
    But I have one query. Suppose I'm in plant B(Receiving).
    From plant A(Supplying), I have received material.
    I've done goods receipt
    But after that I found few material defective & now I need to return it to the supplying plant(A).
    I have already capture & post excise invoice.
    I want to reverse the same.
    Please help me.
    Thanks & Regards,
    Piyush

    Hi Pyush
    Try cancelling the GR,then post the PART 2 again,now system wil reverse the accounting entries,then cancel the excise invoice. 
    Try in your quality system and confirm
    Regards
    Ratha

  • Report for stock transfer from plant to plant

    Hi,
      Is there any standard report for  stock transfer from plant to plant .
      If not is there any enhancements to get the above report.
    Regards,
    Ravindranath.

    Hi Ravi,
    U can use the tcode MB51 and their u can give the input as 301 if it is 1 step in the mvt type or use 303 and 305 for 2 step transfer. and generate the report.
    if u want the list of stock transport orders then use tcode ME2N and the input parameter as  item category "U" and generate the report.
    hope it wud have answered ur question
    Reward if useful
    Shawn

  • Plant to Plant STO with excise invoice and taxes in one company code

    Hi,
    I have a new business requirement, we want to create only one company code and 12 plants in different states,  each plant will have separate purchasing and sales activity this is ok this can be done with separate excise and series group as ther will not be any issue for purchsing and saling of materisl with exice in each plant , but how we can transfer the material plant to plant  if the plant is in different states we want that the material should be transfer from palnt to plant  with excise invoice only,  as we have the company code common,  how to create the billing document for this, and how to pass the duty from the saling plant and capture the same in the recieving plant. with proper tax entry. Can we do the STO with biiling if the two plants are in single compnay code.
    regards,
    zafar

    hi,
    I am trying to create a Stock Transport Order (STO) with document type UB and item category U. My objective is to transfer material from Plant (supplying plant) 100 to Plant (receiving plant) 1100 within one company code (1000) with STO.
    For this purpose I created a raw material 1434 in plant 1000 with sales org 1 view and in that view entered in delivering plant field 1000 as delivery plant. After that I extended material 1434 to plant 1100 without changing anything what I did while creating the material first in Plant 1000 except in organizational level I entered 1100 in the plant field. I entered Sales org 1000 and distribution channel 10 in organization level for both plant while creating and extending the material. In me21n I chose Stock Transport Order with document type UB and item category as U also receiving Plant as 1100. With this when I tried to save the STO the message, I am getting an error,  Cannot determine shipping data for the material 1434? 
    I am doing solely mm function why I need to create Customer master? In this case plant 1100 is the customer right? 
    Solution:
    1. Mat.(1434) should be maintained in both the plants. (1000&1100).
    2. Should have enough stock in supplying plant(1000).
    3. Make its supplying plant as a vendor in vendor master record in receiving plant(1100).
    4. Make it receiving plant as a customer in customization.  
        Create customer (xd01) & and define the shipping data for plants in both the plants.
        Path: spro u2013 img u2013 m.mgmt u2013 purchasing u2013 po u2013 set up STO u2013 define shipping data (1 by1 )
        In Receiving plant (1100)                         In Supplying plant (1000)
        Customer num.  123345 (for ex.)              Customer num.  -
    (don't fill) 
        Sales org.yyy                                                  
        Dist. Channel                                                              
        Sales div.  y   
    5. Assign doc. Type is "NL" for intra company STO. If  STO is inter company, Assign doc. Type is "NLCC".
        Position doc type is "UB"
        Enter supplying plant(1000) & doc type (NL) & checking rule (ex:01)
    6. Assign doc. Type is "UB" to u'r plants.(PO)
        Go for new entries 
        Enter supplying plant(1000) & Receiving plant (1100) & doc type (UB).
    7. Create a PO, choose the doc type is `UB' & item cat.'U', Enter supplying plant as a vendor in PO  of the receiving plant(1100).
    8. Provide this num (PO) to SD people, they will do the delivery by using transactional code is VL10B.
    9. Sales people they will provide "out bound delivery num".
    10. Do the GR. In GR the second tab 05 out bound delivery instead of PO mov.type 101.
    11. See the stock over view in the receiving & supplying plants.  
    thanking you

  • Sto plant to plant(1 company cde)

    Sir,
    While creating STO (plant to plant within company), I am getting an error by not possible to determine shipping data for material…….
    I have done following steps
    1.     Created material master with maintaining sales data in both plant
    2.     Created customer and master data for both plant and maintained in both master records(007 account group*-vendor)
    3.     Mentioned shipping data for both plant in SPRO settings with sales organization and div.
    4.     Assigned delivery type as NL as it is within company code plant to plant transfer, De activated one step procedure
    May any one please help where I am lacking?
    also let me know what has to be done if i wan to go for cross company code.

    Hello Suresh,
    Check the below Configs
    1. IMG->MM->Purchasing-> Setup STO-> Define shipping data for plants
    (Maintain Customer No of Reciving Plant)
    2. IMG-> Logistics Execution->Shipping Points->Shipping Point& Good Receiving Point Determination->Assign Shipping Points
    3. Fill details in Vendor Master-> Purchasing view, from menu Extras-> Add Purchasing Data.
    4. Maintain Shipping details in Customer Master.
    I think this will help you.
    Rgds,
    S.Balaji.

  • Error in Return STO Process(Plant to Plant within company code)

    Hi All,
    I am doing the return STO Process(Plant to Plant within same company code) .
    Scenario:
    STO from Plant 1300 to 1400
    STO Process: ME21N->VL10B->PGI-> VF01(Proforma)->MIGO
    Return STO from Plant 1400 to 1300
    STO Return Process: ME21N(item with return indicator)->MB01(MT 101 w.r.t Return STO PO)->VL10B->PGR(Error)
    It is giving me the following error.
    Deficit of PU GR quantity 5 KG : 20027183 1330 2000 16
    Message no. M7021
    Kindly help me
    with regards
    Azeez.Mohd

    Dear,
       Please go through this link,
        [Deficit of PL Stock in transfer 10 EA : 100100051 IBM2;
        [Accept material in MIRO without any limitation?;
        [migo-return delivery-credit memo;
    Regards,
    Sandip

  • Accounting Problem during STO from Plant to Plant with M.type 351

    Dear Experts,
    Pl. provide solution for the following problem.
    Problem :
    Wrong accounting generation  at the time of Goods Issue from plant to plant within a single company code  with Movement type 351 and without Delivery document.
    Business scenario :
    In order to capture the profit from a Supplying  profit center to  receiving  profit center , receiving  plant (profit center for eg. XX maintained in a Material Master ) has generated  a  Stock Transfer Order (STO) with profit margin for  the supplying plant ( profit center YY maintained in a Material Master ) by maintaining conditions.
    Required Accounting Document :
    Inventory Account  Supplying Profit Center      -                                * CREDIT*
    Inventory Account  Receiving Profit Center  -                                     DEBIT
    Income  from Stock Transfer for the supplying profit Center u2013              CREDIT
    Expense from stock Transfer for the receiving profit Center -                DEBIT    
    Generated Accounting Document in SAP:
    Inventory Account  Supplying Profit Center    -                                 CREDIT
    Inventory Account  Receiving Profit Center  -                                    DEBIT
    Income  from Stock Transfer for the supplying profit Center u2013             DEBIT
    Expense from stock Transfer for the receiving profit Center -              CREDIT
    regards,
    YK

    hi
    check your OBYC settings

  • Movement Type 161error in STO return (Plant to Plant) at the time of goods issue .

    Hi all...
    Am getting the following error while posting goods issue through VL02N
    Update control of movement type is incorrect (entry 161 X X _ L)
    Message no. M7226
    Diagnosis
    The system could not find entry 161 X X _ L in any of the movement type control tables.
    Process : STO Return Plant to Plant.
    Purchase Order ( STO) done.
    Goods issue done.
    Goods receipt at the receiving plant.
    Amended Purchase order, added one more line item and ticked return.
    Inbound delivery done.
    VL02n Goods issue am getting the error.
    Pls help.
    Suhas
    MM consultant

    Update control of movement type is incorrect (entry 161 X X _ L)
    Have a look into your OMJJ customizing for 161 movement type:
    It probably looks like mine:
    the error message has the info in exact the same sequence
    161 X X _ L
    this is 161, checkmark checkmark blank L  in the table above.
    L would mean reference to a delivery.
    But as you can see here, there is no L, everything is B which means reference to purchase order.
    It is not allowed to add items in a delivery without purchase order reference, it is technically possible, but it finally ends in the error you have.
    The process has to start from the purchase order.

  • DIscount condition for plant to plant STO

    Hi,
    Please let me know if this requirement is possible in the system.
    My scenario is when I am transferring stock from plant to plant (both under same company code), I get a subsidy.
    So when I receive the goods in the receiving plant the price has to be net of subsidy. is this possible in the system.
    Example shown below
    Plant X material A price is 100
    Subsidy or discount gained when transfering to Plant Y is 20 INR
    So when I transfer the material to Plant Y the moving average price has to be adjusted and the price should be 80 INR
    Please let me know if its possible.
    Thanks
    Naveen

    Hello,
    I think there is some confusion. If the price decreases when you transfer material from one plant to another, then who will pay for the loss of sending plant.
    If the above statement is true and you still need a tax code to decrease the value, you can create one by making condition records with negative value.
    For Example If you want to maintain the tax code of VAT 4 % then make the condition record with JVRD as -4 and not with +4
    Regards
    Prabhjot Singh

Maybe you are looking for