QUALITY TO UNRESTRICTED
Dear Experts,
How to transfer the stocks from quality to unrestricted w/o using QA11/QA32 T-Codes?
I also tried through mb11/mb1b and its showing an error as"material is in inspection'..
please suggest...
Dear,
If with MB1B movement 321 showing error... not possible to move stock from Q to URest.
Regards,
Syed Hussain.
Similar Messages
-
Issue in WM enabled with HU (Transfer of stock frm Quality to Unrestricted)
Hi,
We've a scenario in such a way of both WM with HU engagged together.
Transfer of a Material from Quality to unrestricted stock type using transfer posting.
1. in MB1B using mvt 321, stock of Matl A with qty 20 has been transferd from Quality to unrestricted.
2. Due to HU mapped, an OBD for posting change had been created.
3. wrt OBD, matl get packed,(as per packing instruction) which is identified with the HU no.
4. Subsequently a TO had been created and confirmed.
as of this stage the stock view in IM & WM is as follows:
IM
Unres -
nil
Quality --- 20
Due to effect of PCN, TO has been created to transfer the stock catogry within the same bin
WM
Bin 1 (Q) 20 --- 922 (Q) 20
922 20 --- Bin 1 20
5. Then as per the process of completion PGI has to occur so as to nullifying the the -ve stock in 922 storage type
so the stock levels will be
IM
Unres --- 20
Quality --- nil
WM
Bin 1 20
Issue case :
A mannual TO has been created moving the stock from Bin 1 to 922 , without doing step 5 (i.e w/o completion of PGI).
This lead my stock figs as
IM
Unres -
nil
Quality -
20
WM
922(Q) 20
This also causes storage unit status as " To be Picked". leads to stuck up to proceed further.
We also tried to do mannual TO to transfer the stock from 922 to BIn 1. Due to unavailabilty of the stock system throws error as -ve stock is not possible for 922 Storage type..
Seeking experts to help out this issue if possibly w/o any customising settings.
Regards,
Prasanna
Edited by: prasanna govindarajan on Sep 22, 2010 2:55 PMDear Venkat,
There is a tick mark in post to inspection stock indicator thereafter inspection lot tab in qa32 or qa11 is not activated.
Secondly, this is a stock item.
Thirdly, No PS module is implemented in my client
I think the user has posted the stock through MB1C with Movt.Type 503 into quality stock.At the time of this posting the 05 inspection type is not activated in QM view of Material Master thatswhy system does not created any inspection lot for this.
After some days,with out stock posting from inspection stock to unrestricted stock,he has activated 05 inspection stock for the first time.
Pl.suggest any possible solution .
Prashant -
IDOC - message type WMMBXY(Stock transfer from quality to unrestricted)
Hi Gurus,
I have IDOC problem.
Inbound message type WMMBXY(Stock transfer from quality to unrestricted), The status if I check in WM02 of Doc is "51-Application document not posted"
Error Message ""Required function
MB_CREATE_GOODS_MOVEMENT is not being processed".
Please Help.
PrashantHi
The Idoc whcile Posting using Message type WMMBXY calls the Function module L_IDOC_INPUT_WMMBXY & in turn this calls the function module MB_CREATE_GOODS_MOVEMENT.
This function is not getting executed.
Please check if the Movemnt type used is not active for WM movemnts.
If you have used previously this movemnt type & now it is not working. Please take hlep of ABAPer for debugging & finding the Root cause
Thanks & Regards
Kishore -
How to list the transfer posting document from quality to unrestricted
hi experts,
i can get GR documents by using MB51
but how to get list of documents from quality to unrestricted and blocked to quality tranferpostings
thank you
ganeshYou can get all the Details in MB51 by Selecting Proper Movement types.
For Eg: Gr Docs using 101, GR Blocked Using 103 and GR Blocked Released using 105 etc.
Regards,
Ashok -
QA11 put from stock in quality to unrestricted use??
Hi everybody
I have a problem with stock in quality control because of Quality Management.
I would like to put it in unrestricted use, but I can't because the material need an inspection plan.
And I don't want to create him an inspection plan, because I have a lot of material.
So I make a QA11 in order to change the usage decision and put the stock in unrestricted use, I have an error message : "The function you selected cannot be carried out:"
Then I try LQ02" posting MM in IM, in order to change the stock category, but it's not possible.
Someone knows MM and QM and could tell How I can put my stock unrestricted use without create an inspection plan.
Thanks a lot
KariHi
You might have activated Material Master -> Quality Management view Inspection setup with Inspecton type 01 for which default contros activates "Inspection with Task List". As task list is not available during GR, material is posted to Quality stock with automatic creation of Inspection Lot. Status of this lot may be starting with CRTD!
You have 2 alternatives
1 - Cancell the GR -> Deactivate Inspection setup and make GR. Ensure that you change the posting to Unrestricted.
OR
2. Create Inspection cask list with header information (Usage - 5 & Status -4) only. You may assign all material to same plan. Next execute Change Insp Lot (QA02) and assign Task List to Insp Lot. Now status will change to Rel and system will allow to post stock to Unrestricted -
Material movement from Quality to Unrestricted
Dear All
My problem is that i have given UD for a particular batch and posted the stock from quality inspection to unrestricted use.
But when i see in the stock overview the quantity still lies in Quality i.e in MMBE
But when i see in QA33 the stock is available in Unrestricted.
Kindly give me a solution
Regards
SurenderDear,
Use movement 321 to move material from QI to unrestricted and movement 343 from blocked to unrestricted.
Regards,
R.Brahmankar -
Moving material from quality to unrestricted
Hi Experts,
We have a scenario where the user has given the UD but the stock posting tab was missing in the QA32 screen, so stock posting could not be done. Now in the stock overview the material is available in quality stock only. We want to take the material to unrestricted stock. Inspection types 01, 08 and 09 are active in material master. Please advise how to proceed? If we try to transfer material from quality to unrestrictedthrough 321 movement in MB1B, we are getting error message "change inspection stock in QM only ". Please advise.
Regards
Sm.Hi
08 is Stock transfer
The QM component cannot manage stock movements for inspection lots that were created manually.
http://help.sap.com/saphelp_erp60_sp/helpdata/en/89/9bb43418e43b4ae10000009b38f83b/frameset.htm
This inspection lot is created automatically during stock transfer or created manually ?
Alagesan -
MSKA - Stock in Quality and Unrestricted both
Dear Experts,
Please help to solve below problem:
After UD 321 done and stock moved to Unrestricted Stock.
At time of UD Batch Status was Restricted, later it has been done Unrestricted thru MSC2N (342 movement).
But in MSKA table, stock is showing against both in Unrestricted and Quality.
How it is possible?
Regards,
Tanuj ParikhDear Tanuj,
Check a change document for the change in batch master record and a material document for the transfer posting. -
Moving the stock from quality to unrestricted.
Hello Experts,
This is regarding QM issue.
in inspection lot certain lot quantity is entered in quality and it is not cleared.
the system status for that lot in QA03 is UD ICCO PRII STUP
now the question is how to clear this one.
even i checked for inconsistency,but there is no inconsistency exits.
kindly tell me how to proceed further and solve this issue.
Regards,
santosh.Hi Santosh, Yes no problem. You can post.
You have now identified the correct lot.
Select this lot and click on execute button. Then go to stock posting tab and post the remaining quantity to unrestricted use.
Itu2019s absolutely correct to post the stock against this lot.
In fact we can say earlier selected lot was incorrect as it was not having status ending with SPRQ or SPST. I explain this to you.
For material XYZ, 5 inspection lots are created containing 20 Qyt each (say lot numbers are 1,2,3,4 and 5). When you look at MMBE, you will see that quantity 100 is lying in quality inspection which is the sum of all lots quantities.
Now one by one you go on posting stock to unrestricted and giving UD. Accidently you gave UD for lot number 3 without posting the stock. Now system will show 20 Qty in quality inspection in MMBE. Here the first task to identify the correct lot against which we did not carry out stock posting. In order to identify this correct lot number against which stock posting was not done, we execute QVM2 transaction. Here lot number 3 has status SPRQ i.e. stock posting required. If you try to post the stock against lot other than 3, system will definitely throw error because it was already posted.
Hence the output of QVM2 always gives the correct lot against which stock posting is not done.
Regards,
Anand Rao -
Not able to post from quality to unrestricted
HI
The Error is displaying when i tried to post the quantity to unrestricted from QA32.
Status check error
The function you selected cannot be carried out Change inspection lot
Detailed info
Stat Description Influence
UD Usage decision has been made Disallowed
Active status
UD
PASG
CCTD
CALC
RREC
DEF
STIC
ICCO
SPRQ
SPST
What may be problem?Hi,
I am not syre but it may be autharisation issue,
Just run transaction again after getting u same erro cretae spool request & check at what object you are not autharised. .Once it get investiget you can take autharistion for same.
Check for both T code- Qa32 ,QA02.
Just check out.
Regards
SANIL -
Hi Guru's,.
I have one issue.
In QA32 my lot is in CRTD CHCR SPRQ. I have not made quality plan for that.in MM01,quality view i activated inspection type 01.
now in mmbe stock is showing in quality.
i want to do transfer posting from quality to unristricted stock.i dont want to use quality plan assign to that lot.
I tried MB1B movemet type 321. i am getting error Change the inspection stock of article 1111030200267 in QM only.
Is any way to do that,transfer posting.
Regards,
siddharthHi,
As your lot has been at CRTD status you need to released by assigning inspection plan.
In QA02 --change inspection lot or in QA32 select lot line item & click on inspection lot so that you can be able to enter in change lot.
In which you can assign your inspection plan ,you will find icon inspec tasl list ,click on same icon.so that you will get message inspection plan assigned , .If system wont allowe you then same screen usage ( You have to select same usage by which you created inspection plan.)
Save the transaction & refresh the QA32 screen
Regards
SANIL -
Transfer posting from Unrestricted to Quality using QM
Hi Team,
Im not expert in QM, I need your help.
Here is using the module QM for quality inspection, I have the following situation:
A GR 101 was done into a PO.
Quality release the material and stock moved from Quality to Unrestricted
The detect that the Qty of pieces are not correct and now they want to reverse the GR, they tried but was not possible. Error:; Deficit of SL Stck.in qual.insp 972 PCE : 004933000301 7601 9001
So What step I need to follow in order to move the inventory from unresticted to Quality.
I already try with Mov 322 but get this message: Change the inspection stock of material xxx in QM onlyIf you have QM then you cannot post stock with MM movement into Q-status.
But you can reverse the GR in MIGO, but not with cancel in reference to material document. You have to do a Goods receipt to purchase order but using then movement type 102 for cancellation. Then in the detail tab you can change the quality status from the proposed quality status to unrstricted status. -
QM: How to Move material from quality stock to unrestricted stock
Hi,
How to post material stock from quality to unrestricted without using 321.
Regards,Hi,
if you have quality management active then you have to mainttain quality view in material master along with the inspection lot settings. now this will result in quality lot creation at the time of GRN. then you have to execute QA32 and get the lot. make usage decision and there you will find tab with lot quantity. there you have to give qty in unrestricted and save it.
if you dont have it then just do the transfer postingeither through MIGO or MB1B with movement type 321. give the mat. plant str loc. qty and save it.
regards,
Adwait Bachuwar -
QA11-Quantity pending to be posted from quality status to unrestricted use
Hi Experts!!
In usage decision process we can select the "code valuation" as Approved to transfer automatically the total quantity from status quality to unrestricted use. But in our system, a small quantity of the total quantity does not is being transferred. eg: We have the inspection lot with 76 pc... we should select the code valuation "Approved" and save. After this, 74 pc are transferred from quality status to unrestricted use. However, 2 pc are kept in quality status.
Could you help me with this issue?
Thanks in advancer for your attention,
Valdevairdear Valdevair
Got the solution for the same. I think you have activated in selected set for the codes "Consider Long-Term Characteristics for Stock Proposal". This is why the stock is remaining in quality
QS51 > selected set > code group > codes > long term inspection > maintain do not consider
This will solve the issue
Please let me know your feedback
Regards
gajesh -
Process to Move Stock from Unrestricted to Restricted / Quality Stock
Dear All,
In one of my plant Quality Management Module is not implemented, but MM module is live and manually using Mov. Type: 321 stock is transferred from Quality to Unrestricted and vice-verse.
My requirement are as follows:
1) How can stock status be changed automatically from Unrestricted to Restricted / Quality once its re validity period reaches.
(For this Inspection Interval of 365 days has been maintained in QM view.)
2) Inspection Lot is not required.
3) How can QA07 & QA05 can help in this ?
Best wishes,
Vivek KumarHi,
1) I am passing Material code, Plant, taking 'Initial run in days=1' and selecting 'Block Batch at Inspection Date', I am getting msg 'No Entries Found' (In this case Inspection Type '09' was not active)
2) When I activate Insp. Type '09' the Inspection Lot is getting generated when i perform the above process but I dont required Insp. Lot.
Suggestion welcome.
Rgds,
Vivek
Maybe you are looking for
-
Material Ledger : Actual Cost settlement to Consumption Accounts
Dear CO Experts, We are aware that when we run CKMLCP, all variances (in the Price Diff GL Account) due to Material Prices flutuation, diff in Standard & Actual Cost of Production, etc. would finally get settled to Consumption or Stock Account in its
-
Layout formula not displayed in web
Hello all, I have a layout for forecasting so depending on the version the planner chooses i will have either 39 or 66 or 9+3. since i am dynamically populating my layouts i am not able to assign Q1,Q2,Q3,Q4 totals so in the 3rd layout screen I am wr
-
Function module equivalent to SWE_EVENT_CREATE while using ABAP classes
Hi there, I used to use SWE_CREATE_EVENT to fire the events linked to my BOR objects, in order to start certain workflows. Now I am using ABAP classes within the WorkFlows, and the name of the classes MUST (in my case) be longer than 10 characters, a
-
When placing an image in InDesign how do I make sure it's not too pix-elated?
Do I change its pixel count in Photoshop? I'm creating a brochure in InDesign and It looks blurry when I place it as my background.
-
ISA CRM 4.0 re-implementation
Hi, I am working on a reimplentation project of ISA CRM 4.0. I need to reimplement it in CRM 6.0 For that i need to look into the java code which was customized for ISA CRM4.0. Can anyone please tell me where can i find that code as we didnot use NWD