Quality wrongly scrapped material instead moving to scrap storage location

Dear all,
Material is quality rejected,In QA32
Stock is wrongly issued as scrap(553) ,
It should be moved to scrap yard storage location from quality because it may be reworked,
How to reverse this action ?
Whether it can be reversed throug program mentioned in SAP Note 175842 ?

Hi,
If u do not want to apply sap note then just try with
Activate inspection type 05.
& reveser of 553 that is u do 554 movement with T code MB1a .
so that new lot will get generated .
Take result for same & then post it ur desir storage location.
I think it will work for u ,better u try first in devlopmnet.
Regards
SANIL

Similar Messages

Downlading Material stocks and its Value, storage location wise

Dear Experts,
As we are reimplementing SAP, we need to download the
a)     stocks Plant and storage location wise for all the materials. Bcoz stocks are maintained in different storage locations.
b)     Value of stocks for each material in the Plant and storage location wise, Bcoz stock qty will be different in different location and hence the value will be dependent upon the qty ?
How can we extract this ? From which tables do we need to extract this ?
Can any one guide on this ?
Regards
Javeed Ahamed.

Goto MB52 report ,change the layout asper your requirement and extract to excel.To extract follow this
go to menu bar
system-- list-- save -- local file
alternatively you can take it MBEW table also(se16n)

Material transfers between plants and storage locations report

Hello experts.
I´m looking for some help.
Actually i am looking for a report that show information about material transfers between plants and storage locations. Is there any report that shows the source of the material (plant, storage location) and also shows the target (plant, storage location).
Thanks for your help.

Hi,
Though you may not get report for the same , but you can narrow down the check by using the table MSEG or MB51 using the moment types like 311 643 (sd delivery moments )which are for stock transfers .
or if you want storage location stock many reports are available like MMBE, or MB53 etc.
Regards

The lastest date that a material is consumed in a storage location ?

hello,
How can we know the latest date ( of a document ) which the given material is consumed in a storage location.
Supposing here we have:
+Material number
+The batch number
+The storage location
and the movement code is 601 ( delivery )..And the table we use is MSEG and MKPF
Thank you for your help.

you have to sort all movements you get by posting date or CPU date, descending, then take the first.

Scrap with different reasons in same storage location

HI Experts,
In one of the scenario; the plants gets scrap from different sources such as from production or from other mean. User wants to see the bifurcation of the certain quantity of the same in the same storage location. I have seen that we can maintain storage bin in Plant/sto view 1; but the constrain is one material-one bin. But user needs it as one material-more bins in the same storage location.
Please advice.

A further segregation of one material is either batch management or split valuation.
Both is not easy to achieve if your material is already active and has stock (this is discussed many times, so please search if you need more info on that)
You can only differentiate by bins if you use warehouse management, in MM it is as you already found out yourself, 1 location = 1 Bin per material

Link material to profit center at storage location level

Hello,
I have one plant 0001, two storage location assigned to this plant (MAG1, MAG2).
In " MAG1", I am keeping the consignment stock (stock blongs to my vendor), hence when I create the material at the storage location I need that profit center be set to PF1
"MAG2" is my own stock location, so when I create material at MAG2 level, I need that profit center be set as PF2.
Does standard SAP allows such scenario.
Is there any possibility to map this scenario
Many thanks for your help
Meher Souayeh

Dear,
Basically GUIXT script work mainly from Technical point of view..
Here they can write codes accordinly so that if you want to make any sort of changes in the application or if you want to put some restriction parameters then by writing codes, it is very much possible to get the desired output.
Hope this clears your doubt.
Utsav

Material Type Movement type and Storage location Authorization Object

Dear All,
My client wants that certain type of material i.e. SFG should not be GR Mvt. type 101 at the FG storage location, they want to restrict to some user ID .
Is there any authorization object or the enhancement to control all three parameter to restrict to particular USER ID?
Thanks in advance.
regards
ALOK Shrivastava

Hi,
        Please check as follows.
        IMG > Material Management > Inv. management and Physical Inventory > Authorization Management
               > Authorization Check for Storage Locations (Indicator on)
Regards,
    Gaito

Creating material in multiple plants and storage locations

Hi Gurus,
I am wondering if someone could help me out in this issue,
I frequently get 1's and 2 materials creation requirement , is there any simple way , while creating material in MM01 , I could create/extend to all plants and storage locations.
I know we can use LSMW , but this is not bulk requirement,it is frequent but in 1or 2 nos.
Any help highly appriciated and rewared.
Thanks.

Hi,
To my knowledge I doubt if both MM17 & MM50 can meet your need, as MM17 is to mass change the values already existing in the MMR, while MM50 is to extend the views in a given plant & not to extend across plants.
A suggestion would be to use the BAPI's -
BAPI_MATERIAL_SAVEDATA Create and Change Material Master Data
BAPI_MATERIAL_SAVEREPLICA BAPI for Mass Maintenance of Material Data
Give your requirement to your abaper & inform him / her to use the above BAPI's. I am sure your abaper can write a simple & user friendly program to meet your exact need.
Regards,
Vivek

Material deletion at plant and storage location deletion at plant

hI EXPERT,
We are going to extend the materials in plant A to plant B and C. So we will extend it using LSMW. After extending, we need to delete the materials in plant A and storage location in plant A. How can we do that? Please explain step by step.
Thanks

Hi,
If you want to delete material at storage location level
Enter MM17
Select table MARD
Select fields tab
find MARD-LVORM
Execute (F8)
Enter list of materials
Enter plant
enter storage location.
tick the field lvorm(carry out mass change)

Combination of Material,Serial Number, Plant and Storage location

Serial Number needs to be fetched corresponding to material, plant and storage location. which tables to hit.
Kartavya

Hi,
Please check table EQSE (OBJK -> EQSE).
Regards,
Ferry Lianto

Material stagging at storage location level

Hi Guys,
When i do material stagging at storage location level (MF60) material moved from one storage location to another storage location 311 and material document is created in system .
I want to do it through two steps that is material issue from one location and receipt in other location
how to do it , what configuration need to be done .
I do not have in WM in scope of implementation.
Thanks and regards
Thamizhchelvan G

Dear,
The movement type 313 removes the stock from the first storage location and in conjunction with this movement type yuo use Movemnt type 315 which in turn places the material in the receiving storage location.
In OMBA you will see Goods Issue Doc Type..
If you click that in the next screen , you will find Tcodes & Doc Type...
Now Go to that T code & Press F4 in the Movement types filed...
So the Above Doc type is applicable to those Mvt types..
These transactions are attached to the Movment types in OMJJ transaction, select the movment type click on Allowed transactions page.
So based on the transaction attched to the Movement type the document type is determined for the Movement types.
Hope clear to you.
Regards,
R.Brahmankar

Material Master Record - How to remove or delete storage location

Dear all,
Is there a way to remove or delete a storage location accidentally extended via MM01 due to extending the general plant view?
I've tried the following:
1. I've used MM06 to flag the particular storage lcoation for deletion. However, when go to MM02 and select the plant view, the storage location that already been flag still exist for selection. I only get the warning prompt "The storage location has been flag for deletion".
2. I tried MMSC attempt to delete and I get either messages with different material master record:
a) "Material not fully maintained for this transaction/event"
OR
b) "Storage location 60BF already exists and cannot be deleted"
P/S: If this question has been asked before by others, please point me to that thread.
I'm grateful for any suggestion. Thanks.
Steven

Hi Jurgen,
I've gone through the data archiving project in the past. I was actually hoping I don't have to go through this big exercise for this minor situation.
The storage locations in the SAP system are fine. The problem is that when I came in to this organization, I found out that the procurement users have accidentally extended material master record to those storage location irrelevant to them. Those users don't post any stock to those accidentally extended storage location. They admit that it was a mistake. So, I don't really have to do stock movement or GI out from those affected storage location because there's nothing in them.
Now that I've initially flag for deletion (MM06) of those mistakes done by those procurement users over the few years counting to 2000+ material master records affected. But the standard behavior of the SAP system allows change to proceed in MM02 except for that warning message MM081. So, I was actually asking around to explore if there's actually an option to make it an error prompt instead and stop the whole change process at MM02 transaction level.
If I may re-confirm, what I've done so far via flaging for deletion of material master record at storage location level - is this the only correct solution available?
Hope this clarifies my intention of opening this thread. Sometimes, users are quite tough in accepting the results from standard SAP system behavior.
Thanks for the time in explaining.
Steven

Material block for sale in plant-storage location level

Dear experts,
Please help me how to block a material to sale in plant-storage location level.
Thank you.
Regards,
Badruddoza

The standard sales block (MVKE-VMSTA) in material master is valid for sales organisation / distribution channel combination (VKORG, VTWEG) - this means you cannot do it for Plant / SLoc combination,
What does it mean to block it at plant / sloc level? Generally in SO you do not specify the storage location. Or you are speaking about MRP also? In this case you could use SLoc-MRP (with proper availability check in delivery) for your material but the problem is that a plant might be assigned to several sales area and this SLoc would be hidden for them also.
Could you please specify what would you like to achieve, what sales block means according to you?
Regards,
Csaba

Open a storage location for a material

Hi,
how can I open a storage location for a material ?
Is also possible to do it automatically ?
Regards

A storage location is customizing, this is in general open to take any material.
depending on the customizing setting for Auto.create storage location you allow SAP to add the storage location view to your material master automatically with the first movement of a material to a storage location or not.
if you dont allow that, then you have to maintain the storage location view in material master manually for each storage location before you can post a movement for this material in a certain storage location.

Repair flow (material non valuated) must be transferred to storage location

Hi,
We create an Repair Sales Order.
Then we receive the material (Mvt 451) in non val. stock.
Then we like to transfer to the shipping storloc. but should not be valuated. From the shipping stor.loc. we would like to create a delivery and send the repaired material back.
How can we transfer the received material (mvt 451) to a storage location without adding value. Which movement type can we use?
Thank you,
Eric.

Hi,
We receive the material with mvt 451 in return stock.
So it is initial not available for transfer. But if I transfer it then it gets valuated. This is what we do not want. Which movement type do I need to use (or more steps) to move it from 451 return stock to an other storagelocation without value creation.
Thank you,
Eric.

Quality wrongly scrapped material instead moving to scrap storage location

Similar Messages

Maybe you are looking for