Quantity Conversion in BEx

Friends,
I am trying to use RSUOM to convert units of measure on weight. I am having some difficulty in getting it to work and am looking for some advice.
I have 0net_wgt_dl in my cube. It is populated with KG and LB. I would like to use a conversion to change all the values to LB.
What I have done to date is created a conversion in RSUOM. I have set this to use table t006 and set the source unit to 'from data record' and the target unit to a fixed unit of LB.
In BEx I set the Unit Conversion type for 0nET_WGT_DL to my Z_LB_CONV and it pulls in the pounds as the Target Unit, but at run time, the data remains as it was without any of this.
I have tried putting breakpoints in all the UNIT_* FMs looking to see what was getting passed and it appears none of them are getting hit.
Is there something I am missing in this scenario?
Regards,
KB

Take a look at these threads & see if they are helpful...
/message/3532362#3532362 [original link is broken]
NODIM
http://help.sap.com/saphelp_bw30b/helpdata/en/03/17f13a2f160f28e10000000a114084/content.htm

Similar Messages

Quantity Conversion in BEX using calculated KF

Hello all
Is it possible to apply a Quantity Conversion in BEX, using Restricted or Calculated Key Figure?
Im trying to apply this solution but the "conversion" tab in the key figure is disabled.
Thanks in advance for your response.

Thanks for your response..
Actually Im using BI7 and for some test, I was trying to create some calculated KF using +the same
key figure+ but different fixed target unit.
(I have already made the changes in 0material and activate the standard ODS for that)
regards,
mv

BI 7 Quantity Conversion in Business Explorer

Hello,
I'm not getting the result for Quantity Conversion at BEx level in BI 7.
I Created Quantity conversion type in RSUOM
All table entries are available in T006 table and the units i'm trying to convert are in the same dimension
Used this Conversion type in key figure at query level.
Still the report output shows the unit and value as stored at Infoprovider level.
Any idea, what could be missing?
Regards,

Mahesh,
Along with Currency conversion, BI 7 has feature for Quantity Conversion.
I used the simple method of conversion using standard T006 table.
Having set the property in Query definition for the key figure in Conversions tab, still the quantity is displayed in Original UOM.
Now i got a warning 'Conversion not possible' and there are no details on that.
I'm still trying to find out if there is some system setting missing.
Mr. DON,
Where can i maintain/check dynamic determination of conv factor.
I'm trying to convert EA to DZ. these are in same dimension.
Regards,
Edited by: Sarkar on Oct 15, 2009 12:32 AM

Quantity conversion not happening at times

Hi all,
I have an issue with Quantity Conversion.The BAse UoM is in Pieces (PC). It works perfectly sometimes and at times when the report is run with Alternate UoM as CS/ KG or TO, it gives the report output in PC only.
This is how the conversion is defined:
1. For material, 0MATERIAL info object is used with 0BASE_UOM and a DSO has been created automatically (in BEx Tab). The data has been loaded for all materials in this DSO
2. A unit conversion type is created in RSUOM. There is no authorization for this tcode. hence cant give more deatils on the definition here.
3. The variable for Alternate UoM used in the query selection screen is built on 0BASE_UOM
4. In the KPI's that use this property, in the conversion tab: the Conversion type is listed AND Target Unit = From Variable
My question is why does the query behave randomly. Why is that the conversion happens properly sometimes and at times it gives the output in Base UoM. Please advice.

Hi,
Can you give some examples of the cases in which the conversion works perfectly, and in which the conversion does not work perfectly?
Another question: is it that the conversion works fine for some specific materials, and for other materials the conversion goes haywire?
Regards,
Suhas

Quantity Conversion

Hi!
I would like to use the Quantity Conversion function (RSUOM) to convert Sales Quantity in base unit (0QUANT_B) from datasource 2LIS_11_VAITM, to a quantity in other Unit of measure with reference to the material?
I just know that the infoobject 0MAT_UNIT can help, but I have no idea in how to do so.
Here is some sample data:
Sales: Material A 10PC
Conversion: 100PC = 160 M2 (Square meter)
Expect to show in report: Material A 16 M2.
Could anyone here please kindly told me the detail steps in doing it?
Thank You very much!!
Best Regards,
Chris

Dear Chris,
I need some help from you, I have gone through your Link in SDN.
I want to convert all the material in to MT ( Metric Tons ) , I try to convert in BEx ( Report Level ) I have followed all the Steps what you have mentioned I this LINK.
Quantity Conversion
This is My Thread , I have posted in SDN but
/thread/529862 [original link is broken]
I think you have solved this Quantity Conversion Issue .
I highly appreciate , if you could send any screen shorts to me.
My Id: [email protected] or [email protected]
Pls go through my link I have wrote step-by-step what I have done.
Thanks & Regards,
SHAIK

Unit Conversion in BEx BI7.0

Hello all,
Im working with BI7.0 and I have been reading the posts about the quantity conversion and In order to use the unit conversion in BEX (not in transformation), I can apply the sugestion described in
https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/b7b2aa90-0201-0010-a480-a755eeb82b6f
But what happens with the post in this forum about using transaction RSUOM ..i mean if i use the link solution isnot necessary to use transaction RSUOM? or with BI7 is the "new" solution to use RSUOM ¿?
Can someone please explain a little bit
Thanks in advance for your help.
MV

thanks gdmon for your help..
I have already created the underlying DSO and "connected" to the 0MAT_UNIT InfoObject using a transformation. In the transformation rule I have been conected:
MATNR->0MATERIAL,
MEINH->0UNIT,
UMREZ->0UOMZ1D,
UMREN->0UOMN1D
but I still have 0BASE_UOM not assigned ..my question is if is possible not assign the infoObject 0BASE_UOM (initial) or if I have to assign to a R/3 field..but do you know which field can I assign?
thanks in advance for your response...
MV

Quantity Conversion in Portal

Hi Gurus,
I use an automated quantity conversion (info Object specific) in my Queries... in BEx Analyzer it works fine.
But when opening the Query in the Portal it says "Quantity conversion not possible".
Do you maybe have an idea? Is there any setting needed in the Template or something else?
Thanks

Hi Gurus,
I use an automated quantity conversion (info Object specific) in my Queries... in BEx Analyzer it works fine.
But when opening the Query in the Portal it says "Quantity conversion not possible".
Do you maybe have an idea? Is there any setting needed in the Template or something else?
Thanks

Quantity Conversion Function Module

Hi,
I am using BW7.0's feature - Quantity Conversion (TCode: RSUOM).
I could use it for converting quantity for different unit on the fly during report time.
Now, I would like to do convert during data upload. Is there any function module that can help?
Please note that the quantity conversion factor is "Material dependent".
Thanks in advance.
Best Regards,
Chris

Hi,.
1) In the BEx Tab page of
Characteristic 0MATERIAL, maintained the field "Base Unit of Measure" as 0BASE_UOM .
2) In the BEx Tab page of
Characteristic 0MATERIAL, maintained the field "Unit of Measure for Char." by click on the New button, it will generate a DataStore Object, which will store information for calculating the conversion factor.
3) Fill in the DataStore generated with data, using the DataSource 0MAT_UNIT_ATTR.
Note that we must NOT use the the former infosource technique and update rules for loading data to it. Use transformation and DTP, else the SID could not be loaded to it.
(I stuck with this problem before..:))
4) Create a Quantity Conversion Type through TCode RSUOM, the Conversion factor can choose 1,3 or 4, with reference to 0MATERIAL InfoObject.
5) Then in any query of cube with 0MATERIAL in it, the quantity conversion type defined in step 4 could be use for displaying data in other UOM~
Hareesh

Open PO LSMW Quantity conversion error in net price calculation

Hi gurus,
I encountered an error as I was tring to upload purchase orders - "Quantity conversion error in net price calculation". What does this mean and how do I fix this?
Please help
Thanks

Hi Jürgen,
Where in the Material Master can I find the conversion ratio between both units?
Also, I am trying to upload POs for Spare Parts and that's when I get the error. But when I try to use other materials like FGs, everything is ok. I can proceed with the upload without any problem
Please help

ME21N--Quantity conversion error in net price calculation

Hi MM experts,
Issue: while creating PO, when attempting to add the net price for line item. but system removes the cost and gives the follow error message says "Quantity conversion error in net price calculation".
The system was not able to convert the order unit into the purchase order price unit. Possible reasons:
i) the conversion results in a net price that is too high, or
ii) the conversion factor for the units has not been properly maintained.
iii) Check whether the units of measure and their conversion factor are correct.
I have checked material master>unit of measure> 1 PL = 22 KG maintained.
Can you please tell me how to resolve this issue?
Appreciated early response.
Thanks in advance.
Suresh

Hi Suresh,
Please check on Material Master Data - Accounting 1 tab - Price Unit
Moshe

Quantity Conversion Error in Net Price Calculation

We are currently using SRM 5.0 ECS where we created a material PO and had a problem with the product not having the language E maintain in the material master. This caused the PO to have status of "error in process" Once we fixed this issue and tried to reprocess the PO we're not getting the following error message in the Application Monitor:
No Instance of Object type PurchaseOrder has been created. External Reference
Puchase Order still contains faulty Items
Quantity Conversion Error in Net Price Calculation
Has anyone seen this or know what we can do to resolve this so that the PO gets replicated in R3?
Thanks in advance.

Hi Robert,
Regarding this backend error E 212 06 Quantity conversion error in net
price calculation.
This error is because in the PO Order price unit is empty. And
quantity is null. So, please enter the quantity and order price unit
for this PO and order the PO again. Or you can retransfer the
PO manually using the FM BBP_PD_PO_TRANSFER_EXEC. (for this fm you need
to input the PO header guid, which you will get it from tx.BBP_PD
by providing PO number and object type as BUS2201).
This has worked for other customers.
Hope this helps,
Kind Regards,
Matthew

Quantity conversion error in net price calculation in BAPI_PO_CREATE1

I'm creating PO from BAPI_PO_CREATE1 .here i'm getting follwing error
quantity conversion error in net price calculation.
plz guide me to remove it.

Are you using quantities directly entered by the user while calling the function to do the net price calculation? If that is the case, you should use FM CONVERSION_EXIT_ALPHA_INPUT to convert the quantity from the external format into the internal one!
Another possibility is that some customizing is missing for converting quantities in different unit of measures (like the quantity in pieces is known, but the pricing calculation is being done on kilos.. but the convertion between these 2 unit of measures is missing).
Good luck!

Query Designer : Quantity Conversion as per UOM

Hi gurus,
I am facing a typical situation here. I have Product Quantity data that I fetch from R3, This has diff UOM based on different product. I know the conversion factor. I have not included the conversion factor in the transformation while loading the data. Hence in the cube, the data is loaded without any conversion.
Now, in my query, I want that the Quantity data be displayed always in say BOX (Whether at aggregate level, ex. Sales Office level or at a more granular level (product brand level)) it should always be in BOX. Can I make such a modification in my query so that the end result for quantity should always be in BOX.
thanks n regards,
Sree

Hi Sree,
You can set unit conversion for relevant key figures in the Query Designer.
For that, you need to create a quantity conversion type first.
For a BW7.x system, use transaction RSUOM to maintain quantity conversion type.
It could be defined like this:
Source unit: from data record
Target unit: fixed: BOX
Hope this helps.
Regards,
Patricia

Quantity Conversion in F & A Pricing

Hello friends,
This question is related to F & A Pricing in IS-Oil MAP solution.
I am facing a problem while changing a Billing Document in VF02. In the pricing item conditions screen, when I try to click on the zoom button of a F & A condition type, I am getting the following error message.
"Unable to convert between units of measure L15 and TO for material". But in the material master of the given material, the converion between TO and L15 has been maitained.
Also I am aware that the F & A pricing might also use the QCI component for the conversion. So anyone help me on where to look for the quantity conversion details specified for F & A pricing.
Thanks in advance,
Sankar.

Dear Shankar,
Adding TO in UoM group may lead to inconsistencies for those material documents posted already. Surprise that you see TO in QCI Test but not in UoM group.
To analyse further, Please check in table LIPSO2 using the delivery document number and Item number and see whether you see a quantity for TO or other mass UoM such as KG. Also please share the below information.
1. Transaction qty and UoM.
2. Base Uom and quantity
3. F&A Price quotation price units.
Regards,
Natarajan

Function Module using Quantity conversion type

Hi,
I need to know the function module which uses the quantity conversion type created in RSUOM and should provide the converted value as the result.
I know the function module which convert the units based on the input. But need to know the FM which uses conversion type.
I tried conversion type available in the transformation rules. But it is not working for a particular case. So thought of doing the same inside a routine.
Awaiting for your reply
Thanks!

Try this and check
select vbakvbeln vbapposnr vbakvkorg vbakvtweg vbak~spart
vbakvkgrp vbakvkbur vbapmatnr vbapmatkl vbap~zieme
into CORRESPONDING FIELDS OF table it_data
from vbak
inner join vbap on vbapvbeln eq vbakvbeln
where vbak-vbeln eq vbeln.
Regards,
Atish

Quantity Conversion in BEx

Similar Messages

Maybe you are looking for