Quantity Conversion

Hi!
I would like to use the Quantity Conversion function (RSUOM) to convert Sales Quantity in base unit (0QUANT_B) from datasource 2LIS_11_VAITM, to a quantity in other Unit of measure with reference to the material?
I just know that the infoobject 0MAT_UNIT can help, but I have no idea in how to do so.
Here is some sample data:
Sales: Material A 10PC
Conversion: 100PC = 160 M2 (Square meter)
Expect to show in report: Material A 16 M2.
Could anyone here please kindly told me the detail steps in doing it?
Thank You very much!!
Best Regards,
Chris

Dear Chris,
I need some help from you, I have gone through your Link in SDN.
I want to convert all the material in to MT ( Metric Tons ) , I try to convert in BEx ( Report Level ) I have followed all the Steps what you have mentioned I this LINK.
Quantity Conversion
This is My Thread , I have posted in SDN but
/thread/529862 [original link is broken]
I think you have solved this Quantity Conversion Issue .
I highly appreciate , if you could send any screen shorts to me.
My Id: [email protected] or [email protected]
Pls go through my link I have wrote step-by-step what I have done.
Thanks & Regards,
SHAIK

Similar Messages

Open PO LSMW Quantity conversion error in net price calculation

Hi gurus,
I encountered an error as I was tring to upload purchase orders - "Quantity conversion error in net price calculation". What does this mean and how do I fix this?
Please help
Thanks

Hi Jürgen,
Where in the Material Master can I find the conversion ratio between both units?
Also, I am trying to upload POs for Spare Parts and that's when I get the error. But when I try to use other materials like FGs, everything is ok. I can proceed with the upload without any problem
Please help

ME21N--Quantity conversion error in net price calculation

Hi MM experts,
Issue: while creating PO, when attempting to add the net price for line item. but system removes the cost and gives the follow error message says "Quantity conversion error in net price calculation".
The system was not able to convert the order unit into the purchase order price unit. Possible reasons:
i) the conversion results in a net price that is too high, or
ii) the conversion factor for the units has not been properly maintained.
iii) Check whether the units of measure and their conversion factor are correct.
I have checked material master>unit of measure> 1 PL = 22 KG maintained.
Can you please tell me how to resolve this issue?
Appreciated early response.
Thanks in advance.
Suresh

Hi Suresh,
Please check on Material Master Data - Accounting 1 tab - Price Unit
Moshe

Quantity Conversion Error in Net Price Calculation

We are currently using SRM 5.0 ECS where we created a material PO and had a problem with the product not having the language E maintain in the material master. This caused the PO to have status of "error in process" Once we fixed this issue and tried to reprocess the PO we're not getting the following error message in the Application Monitor:
No Instance of Object type PurchaseOrder has been created. External Reference
Puchase Order still contains faulty Items
Quantity Conversion Error in Net Price Calculation
Has anyone seen this or know what we can do to resolve this so that the PO gets replicated in R3?
Thanks in advance.

Hi Robert,
Regarding this backend error E 212 06 Quantity conversion error in net
price calculation.
This error is because in the PO Order price unit is empty. And
quantity is null. So, please enter the quantity and order price unit
for this PO and order the PO again. Or you can retransfer the
PO manually using the FM BBP_PD_PO_TRANSFER_EXEC. (for this fm you need
to input the PO header guid, which you will get it from tx.BBP_PD
by providing PO number and object type as BUS2201).
This has worked for other customers.
Hope this helps,
Kind Regards,
Matthew

Quantity conversion error in net price calculation in BAPI_PO_CREATE1

I'm creating PO from BAPI_PO_CREATE1 .here i'm getting follwing error
quantity conversion error in net price calculation.
plz guide me to remove it.

Are you using quantities directly entered by the user while calling the function to do the net price calculation? If that is the case, you should use FM CONVERSION_EXIT_ALPHA_INPUT to convert the quantity from the external format into the internal one!
Another possibility is that some customizing is missing for converting quantities in different unit of measures (like the quantity in pieces is known, but the pricing calculation is being done on kilos.. but the convertion between these 2 unit of measures is missing).
Good luck!

Query Designer : Quantity Conversion as per UOM

Hi gurus,
I am facing a typical situation here. I have Product Quantity data that I fetch from R3, This has diff UOM based on different product. I know the conversion factor. I have not included the conversion factor in the transformation while loading the data. Hence in the cube, the data is loaded without any conversion.
Now, in my query, I want that the Quantity data be displayed always in say BOX (Whether at aggregate level, ex. Sales Office level or at a more granular level (product brand level)) it should always be in BOX. Can I make such a modification in my query so that the end result for quantity should always be in BOX.
thanks n regards,
Sree

Hi Sree,
You can set unit conversion for relevant key figures in the Query Designer.
For that, you need to create a quantity conversion type first.
For a BW7.x system, use transaction RSUOM to maintain quantity conversion type.
It could be defined like this:
Source unit: from data record
Target unit: fixed: BOX
Hope this helps.
Regards,
Patricia

Quantity conversion not happening at times

Hi all,
I have an issue with Quantity Conversion.The BAse UoM is in Pieces (PC). It works perfectly sometimes and at times when the report is run with Alternate UoM as CS/ KG or TO, it gives the report output in PC only.
This is how the conversion is defined:
1. For material, 0MATERIAL info object is used with 0BASE_UOM and a DSO has been created automatically (in BEx Tab). The data has been loaded for all materials in this DSO
2. A unit conversion type is created in RSUOM. There is no authorization for this tcode. hence cant give more deatils on the definition here.
3. The variable for Alternate UoM used in the query selection screen is built on 0BASE_UOM
4. In the KPI's that use this property, in the conversion tab: the Conversion type is listed AND Target Unit = From Variable
My question is why does the query behave randomly. Why is that the conversion happens properly sometimes and at times it gives the output in Base UoM. Please advice.

Hi,
Can you give some examples of the cases in which the conversion works perfectly, and in which the conversion does not work perfectly?
Another question: is it that the conversion works fine for some specific materials, and for other materials the conversion goes haywire?
Regards,
Suhas

Quantity Conversion in F & A Pricing

Hello friends,
This question is related to F & A Pricing in IS-Oil MAP solution.
I am facing a problem while changing a Billing Document in VF02. In the pricing item conditions screen, when I try to click on the zoom button of a F & A condition type, I am getting the following error message.
"Unable to convert between units of measure L15 and TO for material". But in the material master of the given material, the converion between TO and L15 has been maitained.
Also I am aware that the F & A pricing might also use the QCI component for the conversion. So anyone help me on where to look for the quantity conversion details specified for F & A pricing.
Thanks in advance,
Sankar.

Dear Shankar,
Adding TO in UoM group may lead to inconsistencies for those material documents posted already. Surprise that you see TO in QCI Test but not in UoM group.
To analyse further, Please check in table LIPSO2 using the delivery document number and Item number and see whether you see a quantity for TO or other mass UoM such as KG. Also please share the below information.
1. Transaction qty and UoM.
2. Base Uom and quantity
3. F&A Price quotation price units.
Regards,
Natarajan

Function Module using Quantity conversion type

Hi,
I need to know the function module which uses the quantity conversion type created in RSUOM and should provide the converted value as the result.
I know the function module which convert the units based on the input. But need to know the FM which uses conversion type.
I tried conversion type available in the transformation rules. But it is not working for a particular case. So thought of doing the same inside a routine.
Awaiting for your reply
Thanks!

Try this and check
select vbakvbeln vbapposnr vbakvkorg vbakvtweg vbak~spart
vbakvkgrp vbakvkbur vbapmatnr vbapmatkl vbap~zieme
into CORRESPONDING FIELDS OF table it_data
from vbak
inner join vbap on vbapvbeln eq vbakvbeln
where vbak-vbeln eq vbeln.
Regards,
Atish

BI 7 Quantity Conversion in Business Explorer

Hello,
I'm not getting the result for Quantity Conversion at BEx level in BI 7.
I Created Quantity conversion type in RSUOM
All table entries are available in T006 table and the units i'm trying to convert are in the same dimension
Used this Conversion type in key figure at query level.
Still the report output shows the unit and value as stored at Infoprovider level.
Any idea, what could be missing?
Regards,

Mahesh,
Along with Currency conversion, BI 7 has feature for Quantity Conversion.
I used the simple method of conversion using standard T006 table.
Having set the property in Query definition for the key figure in Conversions tab, still the quantity is displayed in Original UOM.
Now i got a warning 'Conversion not possible' and there are no details on that.
I'm still trying to find out if there is some system setting missing.
Mr. DON,
Where can i maintain/check dynamic determination of conv factor.
I'm trying to convert EA to DZ. these are in same dimension.
Regards,
Edited by: Sarkar on Oct 15, 2009 12:32 AM

IS-Oil: Quantity Conversion

Dear All,
Need your help.
My user maintained quantity conversion in the material master (MM02) as
below:-
1 MT = 1,026 L30
Then he created sales order and delivery order. But in the delivery
order, the quantity conversion not as expected. In delivery order, the
conversion shows that 1 MT = 1,026 L30 but for 26.316 MT, the system
converted the quantity to 27,321.187 L30 (1 MT = 1,038 L30) which is
wrong. How to correct the calculation?.
Thank you.

Dear Norhayati,
if I understand your initial question correctly, you want to understand how the dynamic quantity conversion is working in your system, which means for example how the system calculates a mass or weight if a volume at a specified observed temperature is entered, where you give your example in MT and L30.
The answer is not that simple. The SAP QCI is basically an open interface, where you configure in your project the quantity conversion, and where you integrate expert software from SAP partner companies for bulk quantity calculations.
This should always be done following a defined project methodology.
There are many calculation models defined globally.
The SAP QCI does not follow a specific model, and, if not configured at all but just used "as delivered" follows basically a modified DIN 51650 calculation model, without the rounding of quantity values specified in that standard. You can purchase standard document DIN 51650 at http://www.beuth.de .
DIN 51650 u201CTesting of mineral oils and related products u2013 determination of quantityu201D - DIN stands for "Deutsches Institut für Normung", which is the German Institute for Standarization.
QuantityWare, which is a company that develops SAP certified oil & gas conversion products, supports many possible conversion models, which are described here:
http://www.quantityware.com/_data/QuantityWare_MQCI_SP11.pdf
This document also describes the main steps for the dynamic quantity conversion of oil products.
In your case, it is first important to know whether MT stands for mass or weight, and which volume correction standard your system is configured to use, which includes also the version of that standard.
The standard SAP QCI again does only support - via the air buoyancy indicator concept - the DIN 51757 weight correction formula. Standard ASTM D1250-80 on the other hand defines several "tables" how to convert a density (in vaccum) to a density in air, which is then utilized to calculate weights. This standard part is currently being revised by the API/ASTM.
Thus in any project, it is important to define the relevant standards for Volume corrections (temperature and pressure dependant) as well as the weight and mass conversion standards. Rounding of UoM quantities is also important.
I hope this helps a little for a start,
Kind regards,
Markus

Quantity Conversion in Portal

Hi Gurus,
I use an automated quantity conversion (info Object specific) in my Queries... in BEx Analyzer it works fine.
But when opening the Query in the Portal it says "Quantity conversion not possible".
Do you maybe have an idea? Is there any setting needed in the Template or something else?
Thanks

Hi Gurus,
I use an automated quantity conversion (info Object specific) in my Queries... in BEx Analyzer it works fine.
But when opening the Query in the Portal it says "Quantity conversion not possible".
Do you maybe have an idea? Is there any setting needed in the Template or something else?
Thanks

Quantity Conversion in BEX using calculated KF

Hello all
Is it possible to apply a Quantity Conversion in BEX, using Restricted or Calculated Key Figure?
Im trying to apply this solution but the "conversion" tab in the key figure is disabled.
Thanks in advance for your response.

Thanks for your response..
Actually Im using BI7 and for some test, I was trying to create some calculated KF using +the same
key figure+ but different fixed target unit.
(I have already made the changes in 0material and activate the standard ODS for that)
regards,
mv

Quantity conversion in Is-Oil

Hi Gurus,
How the Funciton module OIB_QUANTITY_CONVERSION working in Is-Oil quantity conversion.
This conversion is very cumbersome and not able to understand it..
Awaiting your reply as early as possible
Regards,
Vanisree

Dear Vanisree,
function module OIB_QUANTITY_CONVERSION is part of the SAP QCI sub screen (function group OIB_QCI_SUB_SCREEN). It basically calls the central oil & gas product conversion function OIB_QCI_QUANTITY_CONTROL (perform quantity_conversion).
Function OIB_QCI_QUANTITY_CONTROL is documented in English by SAP, just navigate to transaction SE80 (log on to your system in English) and select function group OIB_QCI, there you choose function OIB_QCI_QUANTITY_CONTROL and select the push button "Function Module Documentation".
Depending what you want to achieve within your development, you may also be able to utilize function OIB_QCI_CONVERSION_SIMPLE, which has a less generic interface tailored by SAP for application developers, that function is also documented.
Since oil quantity conversions, and even more so natural gas and LNG quantity conversions, are very complex, this complexity is tackled with the generic interface you observed.
That is one of the many reasons why e.g. QuantityWare offers the SAP certified products BCP 10A and BCG 10A, which contain a Petroleum Measurement Cockpit / Gas Measurement Cockpit and complete configuration templates to help reducing the complexity in designing & running complex oil & gas quantity conversions:
http://www.quantityware.com/_data/QuantityWare_PetroleumMeasurementCockpit_SP09.pdf
I hope this helps a bit,
Kind regards,
Markus

Quantity Conversion Function Module

Hi,
I am using BW7.0's feature - Quantity Conversion (TCode: RSUOM).
I could use it for converting quantity for different unit on the fly during report time.
Now, I would like to do convert during data upload. Is there any function module that can help?
Please note that the quantity conversion factor is "Material dependent".
Thanks in advance.
Best Regards,
Chris

Hi,.
1) In the BEx Tab page of
Characteristic 0MATERIAL, maintained the field "Base Unit of Measure" as 0BASE_UOM .
2) In the BEx Tab page of
Characteristic 0MATERIAL, maintained the field "Unit of Measure for Char." by click on the New button, it will generate a DataStore Object, which will store information for calculating the conversion factor.
3) Fill in the DataStore generated with data, using the DataSource 0MAT_UNIT_ATTR.
Note that we must NOT use the the former infosource technique and update rules for loading data to it. Use transformation and DTP, else the SID could not be loaded to it.
(I stuck with this problem before..:))
4) Create a Quantity Conversion Type through TCode RSUOM, the Conversion factor can choose 1,3 or 4, with reference to 0MATERIAL InfoObject.
5) Then in any query of cube with 0MATERIAL in it, the quantity conversion type defined in step 4 could be use for displaying data in other UOM~
Hareesh

Quantity Conversion

Similar Messages

Maybe you are looking for