Quantity Field in FAGLL03

Hi Frnds
I am running FAGLL03 reports and over there when i bring the Quantity field from Dynamic selections, i can see the quantity posted for some accounts and not for others.
when i checked th document whether it is posted with quantity or not, I saw that document were psoted with the quantity but still it is not coming in FAGLL03 reprot.
So some documents which has quantity filled in appears in FAGLL03 and some doesnt even though quantity field is filled in documents.
Can some one please tell me what could be the reason?
Matt

The quantity feild is generally used in MM module. When a PO is raised then there would be some data related quantity. As you know the data from MM also gets triggered to FI.
There are other documents which are raised from FI wher you dont need to give any quantity related data. The docs which are from MM have quantity fields and the docs from other modules may not have same.
From your question I am able to understand the same. Hope this wil make your understanding easy.

Similar Messages

Quantity field not getting update in PCA document for Goods Receipt

We have the Purchase Account activated for our company code.
For movement type 101 (Goods Receipt), I am getting the quantity field updated for GR/IR account and Stock Account (B/S item).
But the quantity field is not getting updated for the "Purchase Account" and the "other offsetting PL A/C).
Please advice whether I am missing something.
Regards
B.Mohanty

Hi Aravind,
Check SAP notes 1063198 and 1117587.
FAGLL03 display quantity which is updated in FAGLFLEXA, BSEG is not
relevant in this case. This is clearly explained in the note 1063198.
The quantity posts through to FI on the 'goods receipt' items, but not on the
'invoice receipt' items.
In the FI normally the Quantity is not a 'real' important field, as it
is more related to the MM area.
But in the old 'Profit Center Accounting' and the old' Special Ledger'
the field has been important.
As the same logic of these areas to 'store' the Quantity is also used
in the NewG/L the field get only filled in the line, where it make
'sense' from our point of view, because only in the 'goods receipt'
lines a 'real' Quantity is posted to the system.
So as before in the PCA and SL, now also in the NewG/L the Quantity is
filled in the correct and important lines and postings.
In the BSEG ('old document segment table') the field is filled 'just'
as it is send to the FI, but this is not completely correct from the
business point of view.
This can also lead to issues with the reporting and summation to this
field. So with creating the new logic in the NewG/L the 'correct'
standard of the 'writing' for the Quantity has also been taken over.
So in the end, the update and display is correct according SAP standard behavior.
Actually,Quantities within G/L are never reliable,
because the purpose of FI is a view on the data according to amount
but not according to quantity.
In the FI normally the Quantity is not a 'real' important field, as it
is more related to the MM area.
I hope I could be of assistance.
Regards,
Fernando

Quantity fields not getting displayed in the second total row

Hi,
As per the requirement I have to display 2 total rows for an ALV report using CL_GUI_ALV_GRID. I am able to get the first total row properly using method get_subtotal(). However for the next total row only the character fields are getting displayed and the quantity fields are coming blank.
The second total row will have different values based on a formula.
Please help me out in resolving the issue.
Thanks,
Abhishek

You can provide first row as the SUBTOTAL and next row as the TOTAL.
Get one extra column on which you can do the SUBTOTAL.
Regards,
Naimesh Patel

How can we remove the following zeros from quantity field ?

Hi All.
how can we remove the following zeros from quantity field while populating ALV by using FM REUSE_ALV_GRID_DISPLAY ?
eg:getting output zqty = 2.000
but i need           zqty = 2.
help me to reslove this issue.
Regards.
jay

Hi,
While populating the field catlog do the following thing to   avoid zeros.
wa_fieldcat-tabname = 'I_OUTPUT'.    " Curr
wa_fieldcat-fieldname = 'FWAER'.
wa_fieldcat-seltext_l = text-023.
wa_fieldcat-no_zero = 'X'.
APPEND wa_fieldcat TO i_fieldcat.
CLEAR wa_fieldcat.
Thanks,
Khushbu.

Make quantity field of Free goods as non-editable.

Hie!
I have free goods scheme of 9 + 1 .If quantity of main material is 10 then it will split into 9 + 1 where 1 is free of cost.
While making the sales order the free goods quantity field is editable. So the users are able to change the free goods quantity. I want to make this field as non-editable.
Please suggest how to do this.
Thankyou.

Hi Pallavi
If you change the manual qty which is automatically determined by the system then there will be a message thrown by the system
Suppse in your case if 9+1 you change the qty manually to 2 from 1 there is a message V1 no 737 thrown by the system
You need to change the message class thro ABAP development only not possible thro customization
Not only this in delivery also it is possible to change the free qty and this also has to be controlled by the ABAPer only
Regards
Raja

ALV QUANTITY field Geting converted into decimals ?

Hi All ,
I have developed an alv report .In that the quantity field is made editable after editing the quantity when i save it .It gets converted into decimals.Suppose if i give 77 its getting reflected as .077 all the field name ,table name ,reference field name, reference table name, quantity field data type has been passed but the problem persists.If there is any one whos has come across this kind of scenario please share your thoughts on this.
Best Regards,
Sreeram

Hi Sreeram,
I am not gettin this issue. See below code :
If you are gettiing the same issue with the below code then it has something to do with your user settings.
Go to Menu Item System -> User Profile -> Own Data -> Defaults ->Decimal Notation.
Set it to 1,234,567.89 and save. Now try the program again.
REPORT z_test.
TYPE-POOLS: slis.
TYPES : BEGIN OF ty_ekpo,
          ebeln TYPE ebeln,
          ebelp TYPE ebelp,
          ktmng TYPE ktmng,
          menge TYPE bstmg,
        END OF ty_ekpo.
DATA: it_ekpo TYPE TABLE OF ty_ekpo,
      it_fieldcat TYPE slis_t_fieldcat_alv.
SELECT ebeln ebelp ktmng menge
FROM ekpo
INTO TABLE it_ekpo
UP TO 20 ROWS.
PERFORM add_fieldcat USING 'EBELN'.
PERFORM add_fieldcat USING 'EBELP'.
PERFORM add_fieldcat USING 'KTMNG'.
PERFORM add_fieldcat USING 'MENGE'.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
   i_callback_program                = sy-repid
   it_fieldcat                       = it_fieldcat
TABLES
    t_outtab                          = it_ekpo
EXCEPTIONS
   program_error                     = 1
   OTHERS                            = 2
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
          WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
FORM add_fieldcat USING p_fieldname TYPE slis_fieldcat_alv-fieldname.
DATA: wa_fieldcat TYPE slis_fieldcat_alv.
CLEAR wa_fieldcat.
wa_fieldcat-fieldname = p_fieldname.
wa_fieldcat-tabname = 'IT_EKPO'.
wa_fieldcat-ref_fieldname = p_fieldname.
wa_fieldcat-ref_tabname = 'EKPO'.
IF p_fieldname EQ 'KTMNG'.
    wa_fieldcat-edit = 'X'.
ENDIF.
APPEND wa_fieldcat TO it_fieldcat.
ENDFORM.                    " ADD_FIELDCAT
Regards,
Jovito

Quantity field in ALV

Hello All,
I am using OO - ALV in which I am displaying a quantity field.This field is an editable field and if user tries to change the value and SAVE , it is taking some wrong values.
Say suppose I am having 1.000 as the initial value and if user changes it to 2.000 and saves it is converted to .002.
I tried with qfieldname , ref_fieldname of fieldcat but of no use. Anything apart from this will be highly appreciated.
Regards,
Dhwani

User might be changing the value to only 2 and you might have declared the fieldcat with 2-3 decimal places. If you enter value with decimals say 2.001 it will take.
Otherwise you need to replace it with char value as Nanda has suggested.
Hope it helps.
Thanks,
Jayant

Quantity field in ALV Grid

I am using KWMENG data element in my ALV grid which is a quantity field. In normal dialog programming this field does not allows entering characters in editable cells. But in ALV grid I am not able to restrict it from entering characters.
Eg: In VA01 if we try to enter any character "ABC...Z" then it wouldn't be typed in the screen. But when using the same data element in ALV grid iot allows to enter alphanumeric values. Since it's a quantity field so character value gives a short dump. I know I can restrict the dump by using "NA" in comparing string but I want to knw is there a way by which I restrict character field entry in alv grid, the same way this field works in VA01. I checked with a simple dialog prog and in that also it doesn not allows character typing in editable fields.

simple solution
mention the ref_fieldname and ref_tablename in the fieldcatalog for that column.
ex:
fieldcat-ref_fieldname = 'KWMENG'.
fieldcat-ref_tablename = 'VBAP'.

Quantity field in alv display

Hi all.
we are phasing a problem.
I am using alv to display in output.
I am using a Quantiti field (BDMNG),.
in this field if nodata is there then it is showing 0.000(that is the default value).
I don't want those zeros.I want only space(blank only).
Can any body help me to solve this issue.
Thanks in advance
Eswar.

Hai,
While building field catalog For quantity field Set the NO-ZERO attribute to 'X'.
Or you can change the quantity filed to character in the alv display.
Mark points if helpful.
Regards,
Umasankar

Is is possible to display quantity field in FBU3?

Hi,
Is it possible to display the quantity field in FBU3? We have activated the quantity field for FBL3N but not able to find the configuration to do it for FBU3.
Please guide.

Good Morning Everybody,
The above question still continues...
{Please Answer}

Error with quantity field:Datasource Creation Using Function Module method

Problem with DATASOURCE Creation using Function Module method :
I have created a datasource ZSTANDARD_COST_PRICE using Function Module method . The datasource creation is successfull when I remove the quantity field from the Z table . If I dont remove the quantity field from my Z table it gives an error as "Units Field WAERS for field STPRS of datasource ZSTANDARD_COST_PRICE is hidden". I am not able to remove this error . Please someone guide.
Let me know if my explanation is not clear enough.
Thanks in advance,
Neha.
Z table definition is as below :
MATNR MATNR CHAR 18 0 Material Number
BWKEY BWKEY CHAR 4 0 Valuation area
LFGJA LFGJA NUMC 4 0 Fiscal Year of Current Period
STPRS STPRS CURR 11 2 Standard Price " Here the currency field is WAERS and table T001
PEINH PEINH DEC 5 0 Price Unit
VJSTP VJSTP CURR 11 2 Standard price in previous year
VJPEI VJPEI DEC 5 0 Price unit of previous year.
Edited by: Neha Rathi on Jan 30, 2009 3:03 PM

Hi,
You should add it as one of the main fields as you have added other fields and not as the currency fields...that is..it should be part of the data source and you should be able to see it in RSO2...
Also if added as i said then it will come as new field in the data source...you can either let it be there...or hide it..
also if you want to populate it then you will have to write the code for this fields as well.
Thanks
Ajeet

Runtime error in Dynamic internal table with AMOUNT and Quantity Fields..

Dear friends,
I am attempting write a dymanic Select Statement (with joins).
And the sleect query looks like this..
SELECT (LT_SEL_LIST)
INTO CORRESPONDING FIELDS OF
TABLE <DYN_TABLE>
FROM (LT_FROM_LIST)
WHERE (LT_WHERE3).
Here the into table is a dynamically created internal table..
which is created by ...this
CALL METHOD CL_ALV_TABLE_CREATE=>CREATE_DYNAMIC_TABLE
    EXPORTING
      IT_FIELDCATALOG = IT_OUTPUT2[]
    IMPORTING
      EP_TABLE        = DY_TABLE.
the it_output2 contains the the fieldcatlog information of dynamically given fields :-
like:-
       TABNAME
       FIELDNAME
       DATATYPE
       LENG
       INTTYPE
       ROLLNAME
       DECIMALS
       REFTABLE
       REFFIELD
i mean the internal table is constructed with reference to all the bove metadata.
Problem:- This query run fine with all the fields Except AMOUNT AND QUANTITY fields....
When the selection list contain VBAK-NETWR or MSEG-MENGE..It throws a runtime error.
"The data read during a SLECT access couldnt be inserted into the target field,either conversion is not supported for
the target field's type or the target field is too short."
after this I even tried to construct the dynamic table with CFILEDNAME and QFIELDNAME in the Fieldcatalog.
so now my fieldcatlog looks like this:---
LOOP AT IT_DD03L..
IF IT_DD03L-DATATYPE = 'CURR'.
       TABLEFIELD-CFIELDNAME = IT_DD03L-FIELDNAME .
       ENDIF.
   IF IT_FIELDCAT3-DATATYPE = 'QUAN'.
       TABLEFIELD-QFIELDNAME = IT_DD03L-FIELDNAME .
ENDIF.
       TABLEFIELD-TABNAME     = IT_DD03L-TABNAME.
       TABLEFIELD-FIELDNAME   = IT_DD03L-FIELDNAME.
       TABLEFIELD-DATATYPE    = IT_DD03L-DATATYPE.
       TABLEFIELD-INTLEN      = IT_DD03L-LENG.
       TABLEFIELD-INTTYPE     = IT_DD03L-INTTYPE .
       TABLEFIELD-ROLLNAME    = IT_DD03L-ROLLNAME.
       TABLEFIELD-DECIMALS    = IT_DD03L-DECIMALS.
       TABLEFIELD-REF_TABLE   = IT_DD03L-REFTABLE.
       TABLEFIELD-REF_FIELD   = IT_DD03L-REFFIELD.
APPEND TABLEFIELD.
CLEAR TABLEFIELD.
ENDLOOP.
Note:- this is a test code so ignore performance issues...
Please help me with some code ...to avoid the Runtime erorr.
Thanks,
jeevan.

Hi Jeevan,
Why are moving only few fields from DD03L table to your field catalog? Why don't you use move-corresponding? The following code works for me in ECC6.0.
data: it_dd03l type table of dd03l initial size 0,
      ls_dd03l type dd03l,
      lt_fldcat TYPE lvc_t_fcat,
      ls_fldcat TYPE lvc_s_fcat,
      ls_where(72) TYPE c,
      lt_where LIKE TABLE OF ls_where,
      lt_fld LIKE TABLE OF ls_where,
      lt_data_dy TYPE REF TO data.
field-symbols: <ft_data> TYPE STANDARD TABLE.
select * into table it_dd03l from dd03l
    where tabname = 'VBAK'
      and ( fieldname = 'VBELN' or fieldname = 'NETWR' ).
check sy-subrc eq 0.
loop at it_dd03l into ls_dd03l.
move-corresponding ls_dd03l to ls_fldcat.
append ls_fldcat to lt_fldcat.
move ls_dd03l-fieldname to ls_where.
append ls_where to lt_fld.
if ls_dd03l-fieldname = 'VBELN'.
    clear ls_where.
    concatenate ls_dd03l-fieldname ' <> ''''' into ls_where.
    append ls_where to lt_where.
endif.
endloop.
check not lt_fldcat is initial.
CALL METHOD cl_alv_table_create=>create_dynamic_table
      EXPORTING
        it_fieldcatalog           = lt_fldcat
      IMPORTING
        ep_table                  = lt_data_dy
      EXCEPTIONS
        generate_subpool_dir_full = 1
        OTHERS                    = 2.
    IF sy-subrc <> 0.
      RAISE no_configuration_data.
    ENDIF.
    ASSIGN lt_data_dy->* TO <ft_data>.
check sy-subrc eq 0.
select (lt_fld) from VBAK into corresponding fields of table
    <ft_data>
    where (lt_where).
Thanks
Bala

Check on quantity field of co11n

hi all,
    I want to display error messages when the quantity field at goods movement level of transaction co11n is 0 or space.
Find me the user exit or badi , but field exit is becoming complex as the screen is a table control.
help me.

hi madhav,
CONFPP01                                PP order conf.: Determine customer specific default values
CONFPP02                                PP order conf.: Customer specific input checks 1
CONFPP03                                PP order conf.: Cust. specific check after op. selection
CONFPP04                                PP order conf.: Customer specific input checks 2
CONFPP05                                PP order conf.: Customer specific enhancements when saving
CONFPP06                                PP Order Confirmations: Actual Data Transfer
CONFPP07                                Single Screen Entry: Inclusion of User-Defined Subscreens
CONFPS01                                PS confirmation: Determine customer specific default values
CONFPS02                                PS confirmation: Customer specific input checks 1
CONFPS03                                PS confirmation: Customer specific check after op. selection
CONFPS04                                PS confirmation: Customer specific input checks 2
CONFPS05                                PS confirmation: Customer specific enhancements when saving
CONF0001                                Enhancements in order confirmation
CONFPI01                                Process order conf.: Calculate cust.specific default values
CONFPI02                                Process order confirmation: Customer spec. input checks 1
CONFPI03                                Process order conf.: Cust. spec. check after op. selection
CONFPI04                                Process order conf.: Customer specific input checks 2
CONFPI05                                Process order conf.: Cust. spec. enhancements when saving
CONFPI06                                Process order confirmation: Actual data transfer
CONFPM01                                PM/SM order conf.: Determine cust. specific default values
CONFPM02                                PM/SM order confirmation: Customer specific input checks 1
CONFPM03                                PM/SM order conf.: Cust. spec. check after op. selection
CONFPM04                                PM/SM order conf.: Customer specific input check 2
CONFPM05                                PM/SM order conf.: Cust. specific enhancements when saving
these are the list of userexits for the transaction co11n try keeping the break point in each user exit and check which suits your requirement.
the second method is you can do it by reading the documentation of the each exit.
Hope its clear to you,
Reward points fi usefull,
Thanks,
kalyan.

How to make quantity field in puplic templates editable?

Hi SDN,
we are implementing SRM 5.0.
We have a change request to make the quantity field in public templates (or when you chose approved (old) shopping carts for a new order) ready for input.
What I tried so far is to go to the corresponding template, which is
SAPLBBP_PDH_SEARCH 4001 and exchange
`SUBLIST-QUANTITY[n].value`
by
<input type="text" name="SUBLIST-QUANTITY[n]" value="`SUBLIST-QUANTITY[n].value`">
Debugging the corresponding dynpro 4001 of function group BBP_PDH_SEARCH
PAI: MODULE mark_read_from_web.
there:
LOOP AT <sublist> INTO <lfs_sub_wa>.
shows, that the new quantity I might set on the webfrontend does not get transferred to <sublist>-quantity in the dynpro.
Even though in the debugger I manually changed the incoming quantity, it does not show up on the next webscreen with the shopping cart...
any ideas welcome,
regards, matthias

Hi Atul,
the need for the requirement is very obvious, also we had this modification in the old release - and I am merely trying to rebuild it.
But for the business case: Just imagine you have 100 or more articles in a public template and maybe you have to chose new articles from different public templates. Then it is really painful if you have to recheck the shopping cart after you have filled it, just to change the quantities. This modification saves a lot of time and work for the users. Also I am wondering why it is not already standard behaviour.
regards, matthias

Rounding quantity field in scheduling agreement not considered in JITK

Hello ALL,
I would like to consult to you a scenario I am facing when it comes to creating a scheduling agreement (VA31) and maintaining a Rounding Quantity (field ABLFZ) in it.
When using the standard LZ type scheduling agremeent, the Rounding quantity is considered when creating a delivery in VL10.
However, when using the LZJ type of scheduling agreement, the Rounding quantity is NOT considered when creating a delivery in JITK.
Can you please tell me what causes the case in LZJ scheduling agreement?
Thank you all in advance.

Hi,
This field is not available for Scheduling Agreement. It is only available for Purchase Order.
Even you will not get this in Field selection also.

Quantity Field in FAGLL03

Similar Messages

Maybe you are looking for