Quantity field not getting displayed
Hi,
I am using Adaptived RFC Model to get Sales Order Data from SAP. The Sales Order BAPI that i am using is
BAPI_SALESORDER_DETAIL. I have mapped the SALESORDER table(SALESOPRDER Model node) to the TABLE UI element in my WebDynpro Application.
The problem i am facing is that while all the fields get displayed the Quantity value is not getting displayed in the appropriate column. I have checked the mapping and everything seems to be fine.
Also when i create a separate value node for the table and fill the value node from the model node the quantity value gets displayed then.
Please suggest what can be the possible cause for this.
Regards
Sidharth
Can you please
Hi,
As far as I understand you display output parameters of BAPI, so check to following things:
1. After calling BAPI model method call invalidate on context node to update the values (e.g. outputNode.invalidaet() )
2. Check that you dispaly output parameters and not input parameters of the table. (e.g. You have Quantity and QuantityOutput node so connect you table field to QuantityOutput)
Hope it helps.
Victor.
Similar Messages
-
Quantity fields not getting displayed in the second total row
Hi,
As per the requirement I have to display 2 total rows for an ALV report using CL_GUI_ALV_GRID. I am able to get the first total row properly using method get_subtotal(). However for the next total row only the character fields are getting displayed and the quantity fields are coming blank.
The second total row will have different values based on a formula.
Please help me out in resolving the issue.
Thanks,
AbhishekYou can provide first row as the SUBTOTAL and next row as the TOTAL.
Get one extra column on which you can do the SUBTOTAL.
Regards,
Naimesh Patel -
Quantity field not getting displayed for all document types
Hi,
I have made a configuration to include field Quantity(BSEG-MENGE) in the GL account line item display.When I ran the report for stock adjustment account(FAGLL03), only the following document types are showing quantity against them.
WI- Inventory document
WA-Goods Issue
WE---Not showing quantity against (WE- Goods Receipt)
Can any one please explain. I have seen the original document from FI document. The original document as well as FI document carries quantity.
Thanks
AravindHi Aravind,
Check SAP notes 1063198 and 1117587.
FAGLL03 display quantity which is updated in FAGLFLEXA, BSEG is not
relevant in this case. This is clearly explained in the note 1063198.
The quantity posts through to FI on the 'goods receipt' items, but not on the
'invoice receipt' items.
In the FI normally the Quantity is not a 'real' important field, as it
is more related to the MM area.
But in the old 'Profit Center Accounting' and the old' Special Ledger'
the field has been important.
As the same logic of these areas to 'store' the Quantity is also used
in the NewG/L the field get only filled in the line, where it make
'sense' from our point of view, because only in the 'goods receipt'
lines a 'real' Quantity is posted to the system.
So as before in the PCA and SL, now also in the NewG/L the Quantity is
filled in the correct and important lines and postings.
In the BSEG ('old document segment table') the field is filled 'just'
as it is send to the FI, but this is not completely correct from the
business point of view.
This can also lead to issues with the reporting and summation to this
field. So with creating the new logic in the NewG/L the 'correct'
standard of the 'writing' for the Quantity has also been taken over.
So in the end, the update and display is correct according SAP standard behavior.
Actually,Quantities within G/L are never reliable,
because the purpose of FI is a view on the data according to amount
but not according to quantity.
In the FI normally the Quantity is not a 'real' important field, as it
is more related to the MM area.
I hope I could be of assistance.
Regards,
Fernando -
Enhanced Datasource fields not getting displayed in Transformation
Hi,
Eventhough after replicating the datasource, the Enhanced Datasource fields not getting displayed in Transformation.
Eg I have done mapping of 6 fields in transformation from datasource to DSO
Now the datasource is enhanced with 8 fields...........The transformation is not showing the added 2 fields
I am deleting the existing transformation.Is this the only solution?
Kindly suggest your answers.
Thanks,
Sonu.HI,
Deleting is not solution as it is common scnerio.
Go to the data source in BW and in change mode check the option "transfer" for this two fields and then see if its coming or not.
Thanks
Ajeet -
SAP Fields not getting displayed on the BDT screen
Hello Gurus,
I am trying to add 2 custom fields on to the claims management screen. The following steps were followed to add 2 fields on to the claims Management subclaim screen.
1. Create a field group Zxxxxx1 with the two fields attached to it as input enabled.
2. Create a View Zxxxxx2 attach the created field group Zxxxxx1, then create a subscreen screen add two fields to the screen and make them as input enabled. Then attached the subscreen to the View.
3. Create a PBO and PAI function modules for the screen and attach it to the View Zxxxxx2.
4. Create a section Zxxxxx3 and attach the view Zxxxxx2 to the section.
5. Attach the section to the Subclaim Overview Screen.
6. Inspite of doing all the above steps the screen is not getting displayed or the Function module PAI / PBO / FMOD is not being called.
Since I am attaching the section to a standard screen sequence I am not doing any modification to the screen sequence and screen sequence catagory.
Kindly let me know the steps I am missing in the configration of 2 new fields via BDT.
Reagrds,
ShivaHi Shiva,
did you create your own Z BDT application? Is it set to be active?
I have no access to any claims management system: Does the claim object support divisibility? If so, have you assigned the correct data set in your view?
Also, if you have your own Z BDT application and the claim object does support divisibility, did you assign the Z application to the divisibility view?
Regards,
Frank
Message was edited by: Frank Vieregge -
Fields not getting displayed in Sapscript
Hi Guyz,
I have a customized Sapscript form ZPV_INVOICE and its print program RVADIN01. This form outputs the Sales Invoice. When the print preview is triggered, Material number (MATNR) is not getting displayed on the form. However, when the form is debugged, MATNR values are properly fetched and showed (while debugging only, not in output).
Can somebody please let me know the reason, why the MATNR is not getting displayed on the output, even though it is showing values while debugging.
Thanks in advance !Hi ,
Then check matnr field which is display is same what you are checking in debugging .
COnfirm the field and check whether data stays till end of module .
regards
Deepak. -
Screen fields not getting displayed after Line 16
Hi All,
There is a screen exit created in IW51, now the new requirment is to add 3 more fields. I added the fields below the exiting fields, in line number 15 , 16 &17. After executing the Tcode I could find that the field created in line 17 is not getting displayed in runtime. I have increased the screen length. The fields if moved to line numbers below 16 then they are getting displayed. Can anyone help me to find why it is not getting displayed after line 16.Hi,
Can you give me the Enhancement name?
I searched for the exits using package , but i did not find any screen exists for that IW51 Tcode? -
Fields not getting displayed in AdvancedTable
I have created AdvancedTable region following the steps given in help of Jdeveloper.
Under advancedTable I have created 3 columns, one having a messageChoice item and rest two items are messageTextInput.I have set the ViewObject property of AdvancedTable and have also set the viewAttributes for items.
But when I run the page, It does not display any fields of AdvancedTable. It just gives the table outline and text that is set for table empty property.
I have also executed the VO in processRequest of page's controller.
What could be the reason for the fields not been displayed?
Thanks in advance,
MitikshaYou should provide the ability to create rows, you can do it on the table by making the table editable and putting a Add another row or you can choose to add it in a drill down create page.
You can also add a set of new rows initially by creating and inserting rows in the vo in your PR. -
Quantity field not getting update in PCA document for Goods Receipt
We have the Purchase Account activated for our company code.
For movement type 101 (Goods Receipt), I am getting the quantity field updated for GR/IR account and Stock Account (B/S item).
But the quantity field is not getting updated for the "Purchase Account" and the "other offsetting PL A/C).
Please advice whether I am missing something.
Regards
B.MohantyHi Aravind,
Check SAP notes 1063198 and 1117587.
FAGLL03 display quantity which is updated in FAGLFLEXA, BSEG is not
relevant in this case. This is clearly explained in the note 1063198.
The quantity posts through to FI on the 'goods receipt' items, but not on the
'invoice receipt' items.
In the FI normally the Quantity is not a 'real' important field, as it
is more related to the MM area.
But in the old 'Profit Center Accounting' and the old' Special Ledger'
the field has been important.
As the same logic of these areas to 'store' the Quantity is also used
in the NewG/L the field get only filled in the line, where it make
'sense' from our point of view, because only in the 'goods receipt'
lines a 'real' Quantity is posted to the system.
So as before in the PCA and SL, now also in the NewG/L the Quantity is
filled in the correct and important lines and postings.
In the BSEG ('old document segment table') the field is filled 'just'
as it is send to the FI, but this is not completely correct from the
business point of view.
This can also lead to issues with the reporting and summation to this
field. So with creating the new logic in the NewG/L the 'correct'
standard of the 'writing' for the Quantity has also been taken over.
So in the end, the update and display is correct according SAP standard behavior.
Actually,Quantities within G/L are never reliable,
because the purpose of FI is a view on the data according to amount
but not according to quantity.
In the FI normally the Quantity is not a 'real' important field, as it
is more related to the MM area.
I hope I could be of assistance.
Regards,
Fernando -
View Fields Not Getting Displayed in View Set
Hi All
I have created a new View for Component IUICMDC and assigned it to a ViewSet and on click of a button i need to display this view . The navigation is happening fine but i am not able to see View Fields in it , only ZIUICMDC/AdvSearchVS is getting displayed on top of the page.
View Area is defined and Debugger is stopping in the Do_init method of View which is assigned to ViewSet.
Regards
Alok SharmaYou should provide the ability to create rows, you can do it on the table by making the table editable and putting a Add another row or you can choose to add it in a drill down create page.
You can also add a set of new rows initially by creating and inserting rows in the vo in your PR. -
Newly added field not getting displayed in ALV output
Hi All,
I'm adding one more field/column to be displayed in an old existing program that uses REUSE_ALV_FIELDCATALOG_MERGE to generate the ALV fieldcat.
DATA: BEGIN OF it_salary OCCURS 0,
pernr LIKE pa0000-pernr,
ename LIKE pa0001-ename,
rtext like lv_rtext, -
added field
waers LIKE pa0008-waers
CALL FUNCTION 'REUSE_ALV_FIELDCATALOG_MERGE'
EXPORTING
i_program_name = driver
i_internal_tabname = 'IT_SALARY'
i_client_never_display = 'X'
i_inclname = driver
CHANGING
ct_fieldcat = lv_fieldcat[]
EXCEPTIONS
inconsistent_interface = 1
program_error = 2
OTHERS = 3.
CALL FUNCTION 'REUSE_ALV_LIST_DISPLAY'
EXPORTING
i_callback_program = driver
it_fieldcat = lv_fieldcat[]
i_default = 'X'
i_save = 'A'
is_variant = lv_tmplt
is_layout = lv_ls_layout
i_callback_user_command = 'USER_COMMAND'
TABLES
t_outtab = it_salary
EXCEPTIONS
program_error = 1
OTHERS = 2.
The newly added field is not getting populated in the lv_fieldcat table. Tried running programs BALVBUFDEL,
BCALV_BUFFER_DEL_SHARED then logging off and logging in but of no help.
Please provide suggestion for this issue.
Regards,
Sridevi SHi,
Fieldcat is buffered - so use
I_BYPASSING_BUFFER = 'X'
Since a while CL_GUI_ALV_GRID is available which does NOT need any fieldcat (is determined internally using RTTI). It is worth playing around whith this class if you have some time. This class is recommended for ALV Output by SAP (but no edit is possible - was never supported officially).
A simple use would be:
data: gt_output type standard table of (adjust!).
*simple ALV output
data go_alv type ref to cl_salv_table.
data go_functions type ref to cl_salv_functions_list.
data go_columns type ref to cl_salv_columns_table.
data go_column type ref to cl_salv_column_table.
*Exceprion handlig
data: go_exception type ref to cx_root,
gv_errortext type string.
** fill table gt_output ...
** ALV output
if not gt_output is initial.
try.
call method cl_salv_table=>factory
importing
r_salv_table = go_alv
changing
t_table = gt_output.
catch cx_salv_msg into go_exception.
gv_errortext = go_exception->get_text( ).
message gv_errortext type 'A'.
endtry.
* enable all standard ALV functions
go_functions = go_alv->get_functions( ).
go_functions->set_all( ).
* hide MANDT
go_columns = go_alv->get_columns( ).
go_column ?= go_columns->get_column( columnname = 'MANDT' ).
go_column->set_technical( ).
go_alv->display( ).
Kind regards,
Holger -
Custom field not getting displayed in SUS PO item level
HI all,
We are using SRM 5.0, ECC6.0 and ECS scenario.
As per SAP note 762984, we have enhanced the structures such as :
INCL_EEW_PD_ITEM_CSF_SUSPO
INCL_EEW_PD_ITEM_CSF
and have added a record in the following place in SPRO:
Supplier Relationship management-> Supplier self service->Make field control settings for tables.
| Item | Display | Z.PO.ITM.VIEW
| Item | Change | Z.PO.ITM.EDIT
But we are unable to display the field in the SUS screen.
We had also referred to the following blog :
/people/yeusheng.teo/blog/2008/01/05/ordering-unit-vs-order-pricing-unit-in-srm-sus
but had no success.
Please let us know if we did something wrong or are we missing something.
Also please let us know if BSP changes are really necessary to do this as neither in the SAP note nor in the above mentioned blog, there is any mention about this.
Regards
KishanHi Bharadwaj,
Thank you for your inputs. I executed the program but it didn't display the field.
But I was able to rectify it by re-creating the steps mentioned in the blog (see original post). I had missed giving correct positions to the custom field.
Regards
Kishan -
Fields not getting displayed in Layout
Hi ,
For transaction VA05 we added a two new fields in the field catalog. These fields appear in "Column Set" of all display variants in development. But when transported to quality only for few variants these two fields are appearing in "Column Set".
Can anyone tell me what could be the reason and how to resolve this.
Thanks.hi...
can you check the refrenece table and refrenece field name you hae given.May it because of this reason.
verify the name sof the refrenece table and field and just check. -
Material field not getting displayed on Material Data tab in ME51n or ME21N
Material Field was missing in ME51n/ME21n.
I went into SPRO ->PReq-> Define Screen Layout at Document Level and checked Optional for Material field. Now it's showing up on the ITEM overview section of the Preq.
But its still missing on Material Data tab in ME51n or ME21N but I can see the Material field on the Item Overiew section of the Req/PO Screen.
Where exactly do I make the settings for the item level in SPRO?We use the Enjoy screens and document types for ME51N/ME21N pretty much out of the box. We do not have the material master number on any of the detailed item tabs either. I do not think you can show it in the details unless you activate the customer specific fields tab.
Regards -
Comas(,) are not getting displayed in the output while using OO ABAP
Hi All,
I am using ABAP objects to display the ALV report in which there is a requirement to output Quantity fields. The Quantity fields are getting displayed without comas ','. Please help me in getting back the comas in the output.
Eg:
Below logic is used in my program.
Class name: cl_salv_form_layout_grid
Code:
obj_footer->create_text(
row = v_row_cnt
column = v_col_cnt
text = Quantity).
Expected output:
39,545.000
Current Output:
39545.000
Thanks in advance for your help.
Thanks & Regards,
Siva.Hi,
Please check if the images are in the server and in the /images alias path.
thanks,
Sharmila
Maybe you are looking for
-
Dvrcast load times - is HDS a solution?
We are streaming H.264 video to the dvrcast application using RTMP streaming. Everything is working fine, though we are noticing some unacceptable load times when loading large videos for playback that have been recorded this way. I found http://fo
-
Itunes is taking up too much hard drive space on pc? what do I do?
I love the 20 gb ipod i recently got but it now with just 120 songs seems to have taken up too much space on pc hard-drive (ibm) If i allow it to compress to library what will happen to those songs when i re sync? Guess Im afraid theyll disappear fro
-
Macbook Pro won't operate with Netgear wireless router
In my setup, the macbook pro's physical IP address has to be configured in my router and that seems to be entered OK. However, the macbook won't work wirelessly via the router. The router uses 128bit hex WEP key and the macbook at first seems to acce
-
How do I accept end user license agreement in adobe reader?
I have just updated the Operation System on my iMac from OS 10.6.8 to OS 10.9.4. Safari was updated to 7.0.5. When I attempt to open a pdf in Safari, I get a notice that: Before viewing PDF documents in this browser you must launch Adobe Reader and a
-
I do not have the icloud icon on my mac I have something that says mobile me and it does not accept my apple credentials. How can I get the correct icloud icon