Quantity field total

Hi experts
here in my quantity field there are units cm2(column centimeters) and WD(words) if u caluculate total on qty naturally it will display * is any possibilty there in report level to disply cm2 total seperately and WD total seperately if so tetll me the solution.
regards
anand

Hi Anand,
As you want the subtotals for the quantity and due to different units you are getting * values in the result, the suggested approach was to distinguish the records based on units. This can be achieved using restricted KF where we will restrict the KF on Unit. This will ensure that all the records with "for example KG" as unit will be restricted in one restricted KF. Same can be achieved for all other units.
This means you have to create 15 restricted KFs if you have 15 different units in the data. This will result in a bit slower response while executing the query with som many restricted KFs.
Hope this clears your doubt.
Regards,
Yogesh,

Similar Messages

Quantity fields not getting displayed in the second total row

Hi,
As per the requirement I have to display 2 total rows for an ALV report using CL_GUI_ALV_GRID. I am able to get the first total row properly using method get_subtotal(). However for the next total row only the character fields are getting displayed and the quantity fields are coming blank.
The second total row will have different values based on a formula.
Please help me out in resolving the issue.
Thanks,
Abhishek

You can provide first row as the SUBTOTAL and next row as the TOTAL.
Get one extra column on which you can do the SUBTOTAL.
Regards,
Naimesh Patel

CJI3 report not displaying values correctly in the "Total Quantity" field

Dear Friends,
Need your assistance on the issue explained below,
In our project there is a scenario where the actuals posted on a WBS are split/distributed to various WBS.These actuals that are split can be CATS entries,manual posting (KB21) or postings that come to R3 from a legacy system.The split happens by means of a custom program and is not standard.There is a tab seperated text file that contains the split percentages and the sender as well as the receiver WBS elements.Off late it has been observed that after the split is done the CJI3 report does not show the split quantities correctly and hence there is difference in the values displayed in the currency field.This is not a rounding off difference and is considerable.We have done all possible analysis from our side but i am unable to find how the difference occurs.
To add to this i have even come across certain notes which describe the issue closely but none of it has helped so far. I have simulated the scenario with the same settings in the Quality server and it seems to work fine there without any glitches. We have even compared the program in both the Quality as well as the Production servers and there is no difference in the program as well.The values for the total quantity field are stored in the table COVP and it has been observed the report is fetching this data to display in CJI3.
I have run CJEN too but this too does not correct the report. I was just wondering if any of our colleagues can provide me with some suggestions or insight in this issue.
Regards,
Gokul

Hi Praveen,
Thanks for the response.
Actually i did debug the program with the help of our technical guys but found nothing wrong in both the quality and the production system. We compared the program in both the systems and it seems to be same. I am exploring this issue. Will update the findings here.
In case anyone has any suggestion please do suggest.
Regards,
Gokul

Mapping of period with total quantity field

Hi All,
I haVe Total quantity field MEG001,MEG002,MEG003..............MEG012 from table COSP.
I have parameter on selection screen as period(perio) from table mbewh
No my requirement is if the period is 00 then field MEG001
if period is 01 then MEG002
period11...........MEG011
period 12............MEG012
Please let me know if any solution.
Regards,
oorvi

Hi,
You could try like this,
parameter: p_period type (your period field).
data: len type i,
var type string.
len = p_period + 1.
concatenate 'MEG' len into var.
select single ( var )
from COSP
into temp
where (any conditions)
Vikranth

Quantity field in at user-command

Hi,
I have declared the quantity field V_QTY TYPE AFKO-GAMNG.
I am passing the quantity field values from the internal table which is having data for the quantity field to V_QTY. but the field V_QTY is not filling with the quantity.
Instead of the quantity, it is taking the   * value into the field.
I am not using any control break commands in my coding. I am attaching the code also. can anyone guide me .
Report ztest.
TABLES: AFKO,                         " Order Header
         AFPO,                         " Order Item
         AUFK,                         " Order Master
         RESB,
         AFVC,                         " Order Operation w/i an Order
         AFVV,                        " Qty/Dates/values in an Operation
         CRHD,                         " Work Center
         MARA,                         " Material Master
         MAKT,                         " Material Description
         AUSP,                         " Characteristic Values
         CABN,                         " Characteristic
         PLPO,                         " Task list-operation/activity
         PLFL,                         " Task list - sequences
         TJ02T,                        " System status texts
         JEST.                         " Individual Object Status
TYPE-POOLS:SLIS.
TYPE-POOLS:ICON.
DATA:CHECK(1),
     TOTAL(7) VALUE 'TOTAL :',
     W_AMOUNT TYPE GAMNG VALUE 0.
TYPES:BEGIN OF T_AFKO,
      CHECK,
      AUFNR TYPE AFKO-AUFNR,
      GLTRP TYPE AFKO-GLTRP,
      GSTRP TYPE AFKO-GSTRP,
      GAMNG TYPE AFKO-GAMNG,
      PLNBEZ TYPE AFKO-PLNBEZ,
      END OF T_AFKO.
DATA:I_AFKO TYPE STANDARD TABLE OF T_AFKO,
     W_AFKO LIKE LINE OF I_AFKO.
DATA:I_AFKO1 TYPE STANDARD TABLE OF T_AFKO,
     W_AFKO1 LIKE LINE OF I_AFKO1.
DATA:PONUM TYPE AFKO-AUFNR,
     STDATE TYPE AFKO-GLTRP,
     FIDATE TYPE AFKO-GSTRP,
     QUANTY TYPE AFKO-GAMNG,
     MATER TYPE AFKO-PLNBEZ,
     DESCR TYPE MAKT-MAKTX,
     INDEX TYPE SY-INDEX,
     COUNT(3) VALUE '0'.
TYPES:BEGIN OF T_FINAL,
      CHECK,
      LIGHT TYPE ICON-ID,
      MATNR TYPE RESB-MATNR,
      AUFNR TYPE AFKO-AUFNR,
      GLTRP TYPE AFKO-GLTRP,
      GSTRP TYPE AFKO-GSTRP,
      GAMNG TYPE AFKO-GAMNG,
      PLNBEZ TYPE AFKO-PLNBEZ,
      MAKTX TYPE MAKT-MAKTX,
      END OF T_FINAL.
DATA:I_FINAL TYPE STANDARD TABLE OF T_FINAL,
     W_FINAL LIKE LINE OF I_FINAL,
     I_FINAL1 TYPE STANDARD TABLE OF T_FINAL,
     W_FINAL1 LIKE LINE OF I_FINAL1.
TYPES:BEGIN OF T_CRHD,
      OBJID TYPE CRHD-OBJID,
      ARBPL TYPE CRHD-ARBPL,
      END OF T_CRHD.
DATA:I_CRHD TYPE STANDARD TABLE OF T_CRHD,
     W_CRHD LIKE LINE OF I_CRHD.
TYPES:BEGIN OF T_AFVC,
      AUFPL TYPE AFVC-AUFPL,
      ARBID TYPE AFVC-ARBID,
      END OF T_AFVC.
DATA:I_AFVC TYPE STANDARD TABLE OF T_AFVC,
     W_AFVC LIKE LINE OF I_AFVC.
TYPES:BEGIN OF T_ITEM,
      MATNR TYPE RESB-MATNR,       " Component Matl Number
      MAKTX TYPE MAKT-MAKTX,       " Matl Desc for Component
      BDMNG TYPE RESB-BDMNG,       " Component Req'd Qty
      END OF T_ITEM.
DATA:I_ITEM TYPE STANDARD TABLE OF T_ITEM,
     W_ITEM LIKE LINE OF I_ITEM.
TYPES:BEGIN OF T_RESB,
      MATNR TYPE RESB-MATNR,
      AUFNR TYPE RESB-AUFNR,
      BDMNG TYPE RESB-BDMNG,
      END OF T_RESB.
DATA:I_RESB TYPE STANDARD TABLE OF T_RESB,
     W_RESB LIKE LINE OF I_RESB.
DATA:I_MAKT TYPE STANDARD TABLE OF MAKT,
     W_MAKT LIKE LINE OF I_MAKT,
     I_MAKT1 TYPE STANDARD TABLE OF MAKT,
     W_MAKT1 LIKE LINE OF I_MAKT1.
TYPES:BEGIN OF T_AUFK,
      AUFNR TYPE AUFK-AUFNR,
      AUART TYPE AUFK-AUART,
      WERKS TYPE AUFK-WERKS,
      OBJNR TYPE AUFK-OBJNR,
      END OF T_AUFK.
DATA:I_JEST TYPE STANDARD TABLE OF JEST,
     W_JEST LIKE LINE OF I_JEST.
DATA:I_AUFK TYPE STANDARD TABLE OF T_AUFK,
     W_AUFK LIKE LINE OF I_AUFK.
DATA:V_QTY TYPE AFKO-GAMNG,
     LINES TYPE I,
     V_AUFNR TYPE AFKO-AUFNR.
SELECTION-SCREEN BEGIN OF BLOCK B1 WITH FRAME TITLE TEXT-001.
PARAMETERS:
P_WERKS TYPE AUFK-WERKS OBLIGATORY MEMORY ID WRK, " PLANT
P_AUART TYPE AUFK-AUART OBLIGATORY.                "ORDER TYPE
SELECT-OPTIONS: S_PLNBEZ FOR AFKO-PLNBEZ.          "material
PARAMETERS: P_ARBPL TYPE CRHD-ARBPL OBLIGATORY.    "Work center
SELECT-OPTIONS:
S_GSTRP FOR AFKO-GSTRP OBLIGATORY.   "ORDER BASIC START DATE
*s_gltrp FOR afko-gltrp OBLIGATORY, "ORDER BASIC FINISH DATE
*s_gstrs FOR afko-gstrs,             "ORDER SCHEDULE START DATE
*s_gltrs FOR afko-gltrs.             "ORDER SCHEDULE FINISH DATE
PARAMETERS:P_MATNR TYPE RESB-MATNR.
SELECTION-SCREEN END OF BLOCK B1.
*ALV data declarations
DATA: I_FIELDCATALOG    TYPE SLIS_T_FIELDCAT_ALV,
      W_FIELDCATALOG    LIKE LINE OF I_FIELDCATALOG,
      S_FIELDCATALOG TYPE SLIS_T_FIELDCAT_ALV WITH HEADER LINE,
      GD_TAB_GROUP    TYPE SLIS_T_SP_GROUP_ALV,
      GD_LAYOUT       TYPE SLIS_LAYOUT_ALV,
      GD_REPID        LIKE SY-REPID VALUE SY-REPID,
      T_HEADING       TYPE SLIS_T_LISTHEADER,
      IT_LISTHEADER   TYPE SLIS_T_LISTHEADER,
      W_KEYINFO       TYPE SLIS_KEYINFO_ALV,
      WA_SORT         TYPE SLIS_SORTINFO_ALV,
      IT_SORT         TYPE SLIS_T_SORTINFO_ALV,
      IT_TITLE_BASIC TYPE
            LVC_TITLE VALUE 'SELECTION OF PRODUCTION ORDERS',
      IT_TITLE_ITEM TYPE LVC_TITLE VALUE 'MIXING REPORT'.
DATA: PO TYPE AUFNR,
      P_SELFIELD TYPE SLIS_SELFIELD.
DATA: I_EVENTS TYPE SLIS_T_EVENT,
      W_EVENTS LIKE LINE OF I_EVENTS.
CLEAR:   W_EVENTS.
REFRESH: I_EVENTS.
DATA:I_HEADER TYPE SLIS_T_LISTHEADER,
     W_HEADER LIKE LINE OF I_HEADER.
BEGIN OF CODE FOR ALV_HIERSEQ_LIST*************
TYPES:BEGIN OF T_HHEADER,
     EXPAND,
      MATNR TYPE RESB-MATNR,
      MAKTX TYPE MAKT-MAKTX,
      V_QTY,
      END OF T_HHEADER.
DATA:I_HHEADER TYPE STANDARD TABLE OF T_HHEADER,
     W_HHEADER LIKE LINE OF I_HHEADER.
TYPES:BEGIN OF T_HITEM,
      CHECK,
      MATNR TYPE RESB-MATNR,
      AUFNR TYPE AFKO-AUFNR,
      GAMNG TYPE AFKO-GAMNG,
      PLNBEZ TYPE AFKO-PLNBEZ,
      MAKTX TYPE MAKT-MAKTX,
      GLTRP TYPE AFKO-GLTRP,
      GSTRP TYPE AFKO-GSTRP,
      END OF T_HITEM.
DATA:I_HITEM TYPE STANDARD TABLE OF T_HITEM,
     W_HITEM LIKE LINE OF I_HITEM.
END OF CODE FOR ALV_HIERSEQ_LIST ****************************
INITIALIZATION.
PERFORM BUILD_FIELDCATALOG.
PERFORM BUILD_LAYOUT.
*Start-of-selection.
START-OF-SELECTION.
PERFORM GET_EVENTS.
PERFORM GET_DATA.
END-OF-SELECTION.
PERFORM DISPLAY_ALV_REPORT.
*&      Form BUILD_FIELDCATALOG
      text
FORM BUILD_FIELDCATALOG.
CLEAR W_FIELDCATALOG .
W_FIELDCATALOG-COL_POS      = '1'.
W_FIELDCATALOG-FIELDNAME    = 'MATNR'.
W_FIELDCATALOG-TABNAME      = 'I_HHEADER'.
W_FIELDCATALOG-SELTEXT_M    = 'Phantom Material'.
W_FIELDCATALOG-ROLLNAME     = 'MATNR'.
W_FIELDCATALOG-OUTPUTLEN    = '20'.
APPEND W_FIELDCATALOG TO I_FIELDCATALOG.
CLEAR W_FIELDCATALOG .
W_FIELDCATALOG-COL_POS      = '2'.
W_FIELDCATALOG-FIELDNAME    = 'MAKTX'.
W_FIELDCATALOG-TABNAME      = 'I_HHEADER'.
W_FIELDCATALOG-SELTEXT_M    = 'Phantom Material Description'.
W_FIELDCATALOG-ROLLNAME     = 'MAKTX'.
W_FIELDCATALOG-OUTPUTLEN    = '40'.
APPEND W_FIELDCATALOG TO I_FIELDCATALOG.
CLEAR W_FIELDCATALOG .
W_FIELDCATALOG-COL_POS      = '3'.
W_FIELDCATALOG-FIELDNAME    = 'BDMNG'.
W_FIELDCATALOG-TABNAME      = 'I_HHEADER'.
W_FIELDCATALOG-OUTPUTLEN    = '20'.
W_FIELDCATALOG-SELTEXT_M    = 'Total Batch qty:'.
APPEND W_FIELDCATALOG TO I_FIELDCATALOG.
CLEAR W_FIELDCATALOG .
W_FIELDCATALOG-COL_POS      = '1'.
W_FIELDCATALOG-SELTEXT_M    = 'Selection'.
W_FIELDCATALOG-FIELDNAME    = 'CHECK'.
W_FIELDCATALOG-TABNAME      = 'I_HITEM'.
W_FIELDCATALOG-EDIT        = 'X'.
W_FIELDCATALOG-CHECKBOX    = 'X'.
W_FIELDCATALOG-INPUT       = 'X'.
W_FIELDCATALOG-HOTSPOT     = 'X'.
APPEND W_FIELDCATALOG TO I_FIELDCATALOG.
CLEAR W_FIELDCATALOG .
W_FIELDCATALOG-COL_POS      = '2'.
W_FIELDCATALOG-FIELDNAME    = 'MATNR'.
W_FIELDCATALOG-TABNAME      = 'I_HITEM'.
W_FIELDCATALOG-ROLLNAME     = 'MATNR'.
W_FIELDCATALOG-OUTPUTLEN    = '12'.
APPEND W_FIELDCATALOG TO I_FIELDCATALOG.
CLEAR W_FIELDCATALOG .
W_FIELDCATALOG-COL_POS      = '2'.
W_FIELDCATALOG-FIELDNAME    = 'AUFNR'.
W_FIELDCATALOG-TABNAME      = 'I_HITEM'.
W_FIELDCATALOG-ROLLNAME     = 'AUFNR'.
W_FIELDCATALOG-OUTPUTLEN    = '12'.
APPEND W_FIELDCATALOG TO I_FIELDCATALOG.
CLEAR W_FIELDCATALOG.
W_FIELDCATALOG-COL_POS      = '3'.
W_FIELDCATALOG-SELTEXT_M    = 'PO Qty'.
W_FIELDCATALOG-FIELDNAME    = 'GAMNG'.
W_FIELDCATALOG-ROLLNAME     = 'GAMNG'.
W_FIELDCATALOG-OUTPUTLEN    = '20'.
W_FIELDCATALOG-TABNAME      = 'I_HITEM'.
APPEND W_FIELDCATALOG TO I_FIELDCATALOG.
CLEAR W_FIELDCATALOG.
W_FIELDCATALOG-COL_POS      = '4'.
W_FIELDCATALOG-SELTEXT_M    = 'Header Material'.
W_FIELDCATALOG-FIELDNAME    = 'PLNBEZ'.
W_FIELDCATALOG-ROLLNAME     = 'MATNR'.
W_FIELDCATALOG-OUTPUTLEN    = '20'.
W_FIELDCATALOG-TABNAME      = 'I_HITEM'.
APPEND W_FIELDCATALOG TO I_FIELDCATALOG.
CLEAR W_FIELDCATALOG.
W_FIELDCATALOG-COL_POS      = '5'.
W_FIELDCATALOG-SELTEXT_M    = 'Material Description'.
W_FIELDCATALOG-FIELDNAME    =   'MAKTX'.
W_FIELDCATALOG-ROLLNAME     =   'MAKTX'.
W_FIELDCATALOG-OUTPUTLEN    = '40'.
W_FIELDCATALOG-TABNAME      = 'I_HITEM'.
APPEND W_FIELDCATALOG TO I_FIELDCATALOG.
CLEAR W_FIELDCATALOG .
W_FIELDCATALOG-COL_POS      = '6'.
W_FIELDCATALOG-FIELDNAME    = 'GSTRP'.
W_FIELDCATALOG-TABNAME      = 'I_HITEM'.
W_FIELDCATALOG-ROLLNAME     = 'CO_GSTRP'.
W_FIELDCATALOG-OUTPUTLEN    = '10'.
APPEND W_FIELDCATALOG TO I_FIELDCATALOG.
CLEAR W_FIELDCATALOG .
W_FIELDCATALOG-COL_POS      = '7'.
W_FIELDCATALOG-FIELDNAME    = 'GLTRP'.
W_FIELDCATALOG-TABNAME      = 'I_HITEM'.
W_FIELDCATALOG-ROLLNAME     = 'CO_GLTRP'.
W_FIELDCATALOG-OUTPUTLEN    = '10'.
W_FIELDCATALOG-SELTEXT_M    = 'Basic End Date'.
APPEND W_FIELDCATALOG TO I_FIELDCATALOG.
ENDFORM.                    "BUILD_FIELDCATALOG
*&      Form get_events
      text
FORM GET_EVENTS.
CLEAR : W_EVENTS, I_EVENTS[].
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
    EXPORTING
      I_LIST_TYPE = 0
    IMPORTING
      ET_EVENTS   = I_EVENTS.
READ TABLE I_EVENTS WITH KEY NAME = SLIS_EV_TOP_OF_PAGE
                         INTO W_EVENTS.
IF SY-SUBRC EQ 0.
    MOVE 'TOP_OF_PAGE' TO W_EVENTS-FORM.
    MODIFY I_EVENTS FROM W_EVENTS INDEX SY-TABIX.
ENDIF.
READ TABLE I_EVENTS WITH KEY NAME = SLIS_EV_USER_COMMAND
                         INTO W_EVENTS.
IF SY-SUBRC EQ 0.
    MOVE 'SUB_USER_COMMAND' TO W_EVENTS-FORM.
    MODIFY I_EVENTS FROM W_EVENTS INDEX SY-TABIX.
ENDIF.
READ TABLE I_EVENTS WITH KEY NAME = SLIS_EV_PF_STATUS_SET
            INTO W_EVENTS.
IF SY-SUBRC EQ 0.
    MOVE 'PF_STATUS_SET' TO W_EVENTS-FORM.
    MODIFY I_EVENTS FROM W_EVENTS INDEX SY-TABIX.
ENDIF.
ENDFORM.                    "get_events
*&      Form build_layout
      text
FORM BUILD_LAYOUT.
gd_layout-no_input          = 'X'.
gd_layout-colwidth_optimize = 'X'.
GD_LAYOUT-ZEBRA             = 'X'.
W_KEYINFO-HEADER01          = 'MATNR'.
W_KEYINFO-ITEM01            = 'MATNR'.
GD_LAYOUT-TOTALS_TEXT       = 'Totals'(201).
GD_LAYOUT-EXPAND_FIELDNAME = 'EXPAND'.
ENDFORM.                    " BUILD_LAYOUT
*&      Form data_retrieval
      text
FORM GET_DATA.
IF p_matnr IS NOT INITIAL.
SELECT MATNR
         AUFNR
         BDMNG
         FROM RESB INTO TABLE I_RESB
         WHERE DUMPS = 'X'.
            AND matnr = p_matnr.
SORT I_RESB BY MATNR AUFNR.
ENDIF.
SELECT * FROM JEST INTO CORRESPONDING FIELDS OF TABLE I_JEST
               WHERE STAT = 'I0002'
                AND INACT = ' '.
SELECT OBJID
          ARBPL
          FROM CRHD INTO TABLE I_CRHD WHERE ARBPL = P_ARBPL.
IF NOT I_CRHD[] IS INITIAL.
    SELECT AUFPL
           ARBID
           FROM AFVC INTO TABLE I_AFVC
           FOR ALL ENTRIES IN I_CRHD
           WHERE ARBID = I_CRHD-OBJID.
ENDIF.
IF NOT I_AFVC[] IS INITIAL.
    SELECT AUFNR
           GLTRP
           GSTRP
           GAMNG
           PLNBEZ
           FROM AFKO INTO CORRESPONDING FIELDS OF TABLE I_AFKO
           FOR ALL ENTRIES IN I_AFVC
           WHERE AUFPL = I_AFVC-AUFPL
             AND GSTRP IN S_GSTRP.
    SORT I_AFKO BY AUFNR.
ENDIF.
IF NOT I_AFKO[] IS INITIAL.
    SELECT AUFNR
           AUART
           WERKS
           OBJNR
           FROM AUFK INTO TABLE I_AUFK
           FOR ALL ENTRIES IN I_AFKO
               WHERE AUFNR = I_AFKO-AUFNR
                 AND AUART = P_AUART
                 AND WERKS = P_WERKS.
    SORT I_AUFK BY AUFNR OBJNR.
    SELECT * FROM MAKT INTO TABLE I_MAKT1
             FOR ALL ENTRIES IN I_AFKO
             WHERE MATNR = I_AFKO-PLNBEZ
               AND SPRAS = SY-LANGU.
    SORT I_MAKT1 BY MATNR.
ENDIF.
IF NOT I_RESB[] IS INITIAL.
    SELECT * FROM MAKT INTO TABLE I_MAKT
             FOR ALL ENTRIES IN I_RESB
             WHERE MATNR = I_RESB-MATNR
               AND SPRAS = SY-LANGU.
    SORT I_MAKT BY MATNR.
ENDIF.
CLEAR W_HHEADER-BDMNG.
***BEGIN OF PHANTOM MATERIAL HEADER INTERNAL TABLE***
CLEAR W_AUFK.
CLEAR W_RESB.
LOOP AT I_RESB INTO W_RESB.
    W_HHEADER-MATNR = W_RESB-MATNR.
    READ TABLE I_MAKT INTO W_MAKT
              WITH KEY MATNR = W_RESB-MATNR BINARY SEARCH.
    W_HHEADER-MAKTX = W_MAKT-MAKTX.
    APPEND W_HHEADER TO I_HHEADER.
    MODIFY I_HHEADER FROM W_HHEADER INDEX SY-TABIX.
    CLEAR W_HHEADER.
    CLEAR W_RESB.
    SORT I_HHEADER BY MATNR.
    DELETE ADJACENT DUPLICATES FROM I_HHEADER.
ENDLOOP.
****END OF PHANTOM MATERIAL HEADER INTERNAL TABLE***
**BEGIN OF PHANTOM MATERIAL ITEM DETAILS***************
IF NOT I_HHEADER[] IS INITIAL.
    LOOP AT I_HHEADER INTO W_HHEADER.
      LOOP AT I_RESB INTO W_RESB WHERE MATNR = W_HHEADER-MATNR.
        IF SY-SUBRC = 0.
          READ TABLE I_AUFK INTO W_AUFK
                     WITH KEY AUFNR = W_RESB-AUFNR.
          READ TABLE I_JEST INTO W_JEST
                     WITH KEY OBJNR = W_AUFK-OBJNR.
          IF SY-SUBRC = 0.
            W_HITEM-CHECK = CHECK.
            W_HITEM-MATNR = W_HHEADER-MATNR.
            READ TABLE I_AFKO INTO W_AFKO
                    WITH KEY AUFNR = W_AUFK-AUFNR BINARY SEARCH.
            W_HITEM-AUFNR = W_AFKO-AUFNR.
            W_HITEM-PLNBEZ = W_AFKO-PLNBEZ.
            READ TABLE I_MAKT1 INTO W_MAKT1
                    WITH KEY MATNR = W_AFKO-PLNBEZ.
            W_HITEM-MAKTX = W_MAKT1-MAKTX.
            W_HITEM-GLTRP = W_AFKO-GLTRP.
            W_HITEM-GSTRP = W_AFKO-GSTRP.
            W_HITEM-GAMNG = W_AFKO-GAMNG.
            APPEND W_HITEM TO I_HITEM.
            MODIFY I_HITEM FROM W_HITEM INDEX SY-TABIX.
            SORT I_HITEM BY AUFNR.
            CLEAR W_HITEM.
          ENDIF.
        ENDIF.
      ENDLOOP.
    ENDLOOP.
ENDIF.
***********END OF PHANTOM MATERIAL ITEM DETAILS.*********************
ENDFORM.                    "get_item_DETAILS
*&      Form top_of_page
      text
FORM TOP_OF_PAGE.
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
IT_LIST_COMMENTARY = I_HEADER
I_LOGO =
I_END_OF_LIST_GRID =
ENDFORM.                    " alv_top_of_page
*&      Form user_command
      text
     -->P_UCOMM    text
     -->P_SELFIELD text
FORM DISPLAY_ALV_REPORT.
SORT I_HHEADER BY MATNR.
SORT I_HITEM   BY MATNR AUFNR.
CALL FUNCTION 'REUSE_ALV_HIERSEQ_LIST_DISPLAY'
    EXPORTING
I_INTERFACE_CHECK              = ' '
     I_CALLBACK_PROGRAM             = GD_REPID
     I_CALLBACK_PF_STATUS_SET       = 'PF_STATUS_SET'
     I_CALLBACK_USER_COMMAND        = 'SUB_USER_COMMAND'
     IS_LAYOUT                      = GD_LAYOUT
     IT_FIELDCAT                    = I_FIELDCATALOG
IT_EXCLUDING                   =
IT_SPECIAL_GROUPS              =
IT_SORT                        =
IT_FILTER                      =
IS_SEL_HIDE                    =
I_SCREEN_START_COLUMN          = 0
I_SCREEN_START_LINE            = 0
I_SCREEN_END_COLUMN            = 0
I_SCREEN_END_LINE              = 0
I_DEFAULT                      = 'X'
I_SAVE                         = ' '
IS_VARIANT                     =
     IT_EVENTS                      = I_EVENTS[]
IT_EVENT_EXIT                  =
      I_TABNAME_HEADER               = 'I_HHEADER'
      I_TABNAME_ITEM                 = 'I_HITEM'
i_structure_name_header        =
i_structure_name_item          =
      IS_KEYINFO                     = W_KEYINFO
IS_PRINT                       =
IS_REPREP_ID                   =
I_BYPASSING_BUFFER             =
I_BUFFER_ACTIVE                =
IMPORTING
E_EXIT_CAUSED_BY_CALLER        =
ES_EXIT_CAUSED_BY_USER         =
    TABLES
      T_OUTTAB_HEADER                = I_HHEADER
      T_OUTTAB_ITEM                  = I_HITEM
EXCEPTIONS
PROGRAM_ERROR                  = 1
OTHERS                         = 2
IF SY-SUBRC <> 0.
MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
        WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDFORM.                    "display_alv_report
*****BEGIN OF CUMMILATIVE QUANTITY***********************
FORM PF_STATUS_SET USING EXTAB TYPE SLIS_T_EXTAB.
BREAK POINT.
SET PF-STATUS 'STANDARD' EXCLUDING EXTAB.
ENDFORM.                    "PF_STATUS_SET
*&      Form SUB_USEMR_COMMAND
      text
     -->P_UCOMM    text
     -->P_SELFIELD text
FORM SUB_USER_COMMAND USING P_UCOMM LIKE SY-UCOMM
                       P_SELFIELD TYPE SLIS_SELFIELD.
CASE SY-UCOMM.
    WHEN 'SUMM'.
      CLEAR W_HITEM.
      CLEAR W_HHEADER-V_QTY.
      P_SELFIELD-REFRESH = 'X'.
      DATA:LV_TABIX TYPE SY-TABIX.
      LOOP AT I_HITEM INTO W_HITEM.
        READ TABLE I_HHEADER INTO W_HHEADER
                    WITH KEY MATNR = W_HITEM-MATNR BINARY SEARCH.
        IF SY-SUBRC = 0.
          LV_TABIX = SY-TABIX.
          IF W_HITEM-CHECK = 'X'.
            W_HHEADER-V_QTY = W_HHEADER-V_QTY + W_HITEM-GAMNG.
            MODIFY I_HHEADER FROM W_HHEADER
                  INDEX LV_TABIX." TRANSPORTING V_QTY.
          ENDIF.
        ENDIF.
      ENDLOOP.
ENDCASE.
ENDFORM.                    "USER_COMMAND
*********END OF CUMMILATIVE QUANTITY
Thanks in advance.
Ramesh.

Hello Ramesh,
Check your declerations,
In internal table I_HHEADER , the quantity field is of character type. And in internal table I_HITEM, the field GAMNG is of type quantity. There will be type mismatch.Correct it and see if it works.
Regards

Populating Quantity fields in Table Maintainance generator Events.

Hi all,
I have a custom table, in that i have to check the material number and the quantity of the previously present entries and current entry which i am adding in the before save event.
However in the total table.... The value of material is getting populated correctly but the value of the quantity is not the actual one which i have entered, It is taking the value 0.00 at runtime.
Please suggest me the approach when we have to deal with the Quantity fields in the table events.
Thanks in advance for your help.
Regards,
Anuja

Hi,
The reference for the Quantity field is provided in the Custom table. However the value of the Quantity is taken as 0.00 at run time.
Please refer to the below code.
LOOP AT total.
    IF <action> EQ space.
      l_wa_temp-matnr = total+3(18).
    l_wa_temp-bmenge = total+95(13).
      APPEND l_wa_temp TO l_i_temp.
      CLEAR l_wa_temp .
    ENDIF.
ENDLOOP.
however the l_wa_temp-bmenge is getting populated as 0.00 however the actual value entered for it is 10
Regards,
Anuja

Quantity field in Asset Master

Dear All,
We have created one Asset e.g. "Drawframe" which includes the total acqusition value of 10 Drawframes i.e. if 1 drawframe is of 1000 Rs/- then we have included 10,000 Rs (1000*10) in single asset "Drawframe".
Now my query is:
When I sell one drawframe then how would I be able account it in Asset accounting, because I have a single asset with combined drawframe values.
I saw quantity field in the Asset Master. Please let me know if the use of this field in my case.
Regards

hi
check out this SAP explanation for that field
Quantity
Quantity that the system manages on the asset
Use
For assets in which a base unit of measure is entered, you can enter a quantity when you post acquisitions and retirements. The system then updates the asset according to this quantity when you post, based on the debit/credit flag of the transaction posted.
In addition, you can already specify a quantity when you create a new asset master record. However, any quantity you enter in master data maintenance (such as 1) is added to any quantity that is entered in the acquisition posting.

Regarding Editable Quantity field in ALV Grid

Hi Experts,
I need your advice in this 2 scenarios.
1.I have a scenario where quantity field in output is editable and the user wants the quantity field printed without thousand separator. If i take a char field and display the field is editable then user may mistakenly type a,bcd...z/ special characters which it should not capture. Is there any char data type data element which accepts only integers. Because after that i need to save that value in z database table quantity field.
2. when there i raised an error message after validation of that editable field in alv output(by events), the user wants all other rows in that grid as uneditable except the row which has got error till this error is solved. Is this possible. If yes how.
Please share your valuable suggestions.

Hi abilash n
as in dictionary, all quantity fields should have a reference to the unit field which then defines the number of decimals.
The rest is done automatically as long as you do it standard way. In field catalog you have to set the fcat-qfieldname to the name of the field that has the unit.
If you do so, also totals will be grouped by unit.
SAP has really done a great thing by inventing units for quantities (and currency keys for currency amounts). Only developers do not understand and thus refuse to use it.
Regards,
Clemens

Numeric field total in ALV

Hi Experts,
I have one numeric field in ALV report, i want the subtotal of that numeric field, how i can do that.
IF i am using do_sum that is not working, it is giving interger fields total not numeric fields total?
Urgent,
useful reward points.....

Hi
i am sending a sample code for alv subtotals.you go through it.
REPORT z_alv_subtotal.
*& Table declaration
TABLES: EKKO.
*& Type pool declaration
TYPE-POOLS: SLIS. " Type pool for ALV
*& Selection screen
SELECT-OPTIONS: S_EBELN FOR EKKO-EBELN.
*& Type declaration
Type declaration for internal table to store EKPO data
TYPES: BEGIN OF X_DATA,
EBELN TYPE CHAR30, " Document no.
EBELP TYPE EBELP, " Item no
MATNR TYPE MATNR, " Material no
MATNR1 TYPE MATNR, " Material no
WERKS TYPE WERKS_D, " Plant
WERKS1 TYPE WERKS_D, " Plant
NTGEW TYPE ENTGE, " Net weight
GEWE TYPE EGEWE, " Unit of weight
END OF X_DATA.
*& Internal table declaration
DATA:
Internal table to store EKPO data
I_EKPO TYPE STANDARD TABLE OF X_DATA INITIAL SIZE 0,
Internal table for storing field catalog information
I_FIELDCAT TYPE SLIS_T_FIELDCAT_ALV,
Internal table for Top of Page info. in ALV Display
I_ALV_TOP_OF_PAGE TYPE SLIS_T_LISTHEADER,
Internal table for ALV Display events
I_EVENTS TYPE SLIS_T_EVENT,
Internal table for storing ALV sort information
I_SORT TYPE SLIS_T_SORTINFO_ALV,
I_EVENT TYPE SLIS_T_EVENT.
*& Work area declaration
DATA:
WA_EKKO TYPE X_DATA,
WA_LAYOUT TYPE SLIS_LAYOUT_ALV,
WA_EVENTS TYPE SLIS_ALV_EVENT,
WA_SORT TYPE SLIS_SORTINFO_ALV.
*& Constant declaration
CONSTANTS:
C_HEADER TYPE CHAR1
VALUE 'H', "Header in ALV
C_ITEM TYPE CHAR1
VALUE 'S'.
*& Start-of-selection event
START-OF-SELECTION.
Select data from ekpo
SELECT EBELN " Doc no
EBELP " Item
MATNR " Material
MATNR " Material
WERKS " Plant
WERKS " Plant
NTGEW " Quantity
GEWEI " Unit
FROM EKPO
INTO TABLE I_EKPO
WHERE EBELN IN S_EBELN
AND NTGEW NE '0.00'.
IF SY-SUBRC = 0.
SORT I_EKPO BY EBELN EBELP MATNR .
ENDIF.
To build the Page header
PERFORM SUB_BUILD_HEADER.
To prepare field catalog
PERFORM SUB_FIELD_CATALOG.
Perform to populate the layout structure
PERFORM SUB_POPULATE_LAYOUT.
Perform to populate the sort table.
PERFORM SUB_POPULATE_SORT.
Perform to populate ALV event
PERFORM SUB_GET_EVENT.
END-OF-SELECTION.
Perform to display ALV report
PERFORM SUB_ALV_REPORT_DISPLAY.
*& Form sub_build_header
To build the header
No Parameter
FORM SUB_BUILD_HEADER .
Local data declaration
DATA: L_SYSTEM TYPE CHAR10 , "System id
L_R_LINE TYPE SLIS_LISTHEADER, "Hold list header
L_DATE TYPE CHAR10, "Date
L_TIME TYPE CHAR10, "Time
L_SUCCESS_RECORDS TYPE I, "No of success records
L_TITLE(300) TYPE C. " Title
Title Display
L_R_LINE-TYP = C_HEADER. " header
L_TITLE = 'Test report'(001).
L_R_LINE-INFO = L_TITLE.
APPEND L_R_LINE TO I_ALV_TOP_OF_PAGE.
CLEAR L_R_LINE.
Run date Display
CLEAR L_DATE.
L_R_LINE-TYP = C_ITEM. " Item
WRITE: SY-DATUM TO L_DATE MM/DD/YYYY.
L_R_LINE-KEY = 'Run Date :'(002).
L_R_LINE-INFO = L_DATE.
APPEND L_R_LINE TO I_ALV_TOP_OF_PAGE.
CLEAR: L_R_LINE,
L_DATE.ENDFORM. " sub_build_header
*& Form sub_field_catalog
Build Field Catalog
No Parameter
FORM SUB_FIELD_CATALOG .
Build Field Catalog
PERFORM SUB_FILL_ALV_FIELD_CATALOG USING:
'01' '01' 'EBELN' 'I_EKPO' 'L' 'Doc No'(003) ' ' ' ' ' ' ' ',
'01' '02' 'EBELP' 'I_EKPO' 'L' 'Item No'(004) 'X' 'X' ' ' ' ',
'01' '03' 'MATNR' 'I_EKPO' 'L' 'Material No'(005) 'X' 'X' ' ' ' ',
'01' '03' 'MATNR1' 'I_EKPO' 'L' 'Material No'(005) ' ' ' ' ' ' ' ',
'01' '04' 'WERKS' 'I_EKPO' 'L' 'Plant'(006) 'X' 'X' ' ' ' ',
'01' '04' 'WERKS1' 'I_EKPO' 'L' 'Plant'(006) ' ' ' ' ' ' ' ',
'01' '05' 'NTGEW' 'I_EKPO' 'R' 'Net Weight'(007) ' ' ' ' 'GEWE' 'I_EKPO'
ENDFORM. " sub_field_catalog
*& Form sub_fill_alv_field_catalog
*& For building Field Catalog
*& p_rowpos Row position
*& p_colpos Col position
*& p_fldnam Fldname
*& p_tabnam Tabname
*& p_justif Justification
*& p_seltext Seltext
*& p_out no out
*& p_tech Technical field
*& p_qfield Quantity field
*& p_qtab Quantity table
FORM SUB_FILL_ALV_FIELD_CATALOG USING P_ROWPOS TYPE SYCUROW
P_COLPOS TYPE SYCUCOL
P_FLDNAM TYPE FIELDNAME
P_TABNAM TYPE TABNAME
P_JUSTIF TYPE CHAR1
P_SELTEXT TYPE DD03P-SCRTEXT_L
P_OUT TYPE CHAR1
P_TECH TYPE CHAR1
P_QFIELD TYPE SLIS_FIELDNAME
P_QTAB TYPE SLIS_TABNAME.
Local declaration for field catalog
DATA: WA_LFL_FCAT TYPE SLIS_FIELDCAT_ALV.
WA_LFL_FCAT-ROW_POS = P_ROWPOS. "Row
WA_LFL_FCAT-COL_POS = P_COLPOS. "Column
WA_LFL_FCAT-FIELDNAME = P_FLDNAM. "Field Name
WA_LFL_FCAT-TABNAME = P_TABNAM. "Internal Table Name
WA_LFL_FCAT-JUST = P_JUSTIF. "Screen Justified
WA_LFL_FCAT-SELTEXT_L = P_SELTEXT. "Field Text
WA_LFL_FCAT-NO_OUT = P_OUT. "No output
WA_LFL_FCAT-TECH = P_TECH. "Technical field
WA_LFL_FCAT-QFIELDNAME = P_QFIELD. "Quantity unit
WA_LFL_FCAT-QTABNAME = P_QTAB . "Quantity table
IF P_FLDNAM = 'NTGEW'.
WA_LFL_FCAT-DO_SUM = 'X'.
ENDIF.
APPEND WA_LFL_FCAT TO I_FIELDCAT.
CLEAR WA_LFL_FCAT.
ENDFORM. " sub_fill_alv_field_catalog
*& Form sub_populate_layout
Populate ALV layout
No Parameter
FORM SUB_POPULATE_LAYOUT . CLEAR WA_LAYOUT.
WA_LAYOUT-COLWIDTH_OPTIMIZE = 'X'." Optimization of Col width
ENDFORM. " sub_populate_layout
*& Form sub_populate_sort
Populate ALV sort table
No Parameter
FORM SUB_POPULATE_SORT .
Sort on material
WA_SORT-SPOS = '01' .
WA_SORT-FIELDNAME = 'MATNR'.
WA_SORT-TABNAME = 'I_EKPO'.
WA_SORT-UP = 'X'.
WA_SORT-SUBTOT = 'X'.
APPEND WA_SORT TO I_SORT .
CLEAR WA_SORT.
Sort on plant
WA_SORT-SPOS = '02'.
WA_SORT-FIELDNAME = 'WERKS'.
WA_SORT-TABNAME = 'I_EKPO'.
WA_SORT-UP = 'X'.
WA_SORT-SUBTOT = 'X'.
APPEND WA_SORT TO I_SORT .
CLEAR WA_SORT.
ENDFORM. " sub_populate_sort
*& Form sub_get_event
Get ALV grid event and pass the form name to subtotal_text
event
No Parameter
FORM SUB_GET_EVENT .
CONSTANTS : C_FORMNAME_SUBTOTAL_TEXT TYPE SLIS_FORMNAME VALUE
'SUBTOTAL_TEXT'.
DATA: L_S_EVENT TYPE SLIS_ALV_EVENT.
CALL FUNCTION 'REUSE_ALV_EVENTS_GET'
EXPORTING
I_LIST_TYPE = 4
IMPORTING
ET_EVENTS = I_EVENT
EXCEPTIONS
LIST_TYPE_WRONG = 0
OTHERS = 0.
Subtotal
READ TABLE I_EVENT INTO L_S_EVENT
WITH KEY NAME = SLIS_EV_SUBTOTAL_TEXT.
IF SY-SUBRC = 0.
MOVE C_FORMNAME_SUBTOTAL_TEXT TO L_S_EVENT-FORM.
MODIFY I_EVENT FROM L_S_EVENT INDEX SY-TABIX.
ENDIF.
ENDFORM. " sub_get_event
*& Form sub_alv_report_display
For ALV Report Display
No Parameter
FORM SUB_ALV_REPORT_DISPLAY .
DATA: L_REPID TYPE SYREPID .
L_REPID = SY-REPID .
This function module for displaying the ALV report
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
I_CALLBACK_PROGRAM = L_REPID
I_CALLBACK_TOP_OF_PAGE = 'SUB_ALV_TOP_OF_PAGE'
IS_LAYOUT = WA_LAYOUT
IT_FIELDCAT = I_FIELDCAT
IT_SORT = I_SORT
IT_EVENTS = I_EVENT
I_DEFAULT = 'X'
I_SAVE = 'A'
TABLES
T_OUTTAB = I_EKPO
EXCEPTIONS
PROGRAM_ERROR = 1
OTHERS = 2.
IF SY-SUBRC <> 0.
MESSAGE i000 WITH 'Error in ALV report display'(055).
ENDIF.ENDFORM. " sub_alv_report_display
FORM sub_alv_top_of_page
Call ALV top of page
No parameter
FORM SUB_ALV_TOP_OF_PAGE. "#EC CALLED
To write header for the ALV
CALL FUNCTION 'REUSE_ALV_COMMENTARY_WRITE'
EXPORTING
IT_LIST_COMMENTARY = I_ALV_TOP_OF_PAGE.
ENDFORM. "alv_top_of_page
*& Form subtotal_text
Build subtotal text
P_total Total
p_subtot_text Subtotal text info
FORM SUBTOTAL_TEXT CHANGING
P_TOTAL TYPE ANY
P_SUBTOT_TEXT TYPE SLIS_SUBTOT_TEXT.
Material level sub total
IF P_SUBTOT_TEXT-CRITERIA = 'MATNR'.
P_SUBTOT_TEXT-DISPLAY_TEXT_FOR_SUBTOTAL
= 'Material level total'(009).
ENDIF.
Plant level sub total
IF P_SUBTOT_TEXT-CRITERIA = 'WERKS'.
P_SUBTOT_TEXT-DISPLAY_TEXT_FOR_SUBTOTAL = 'Plant level total'(010).
ENDIF.
ENDFORM. "subtotal_text

Passing quantity field into RF Module

Hi,
From java application we are passing quantity field (parameters) to bapi goods mvt create . we have applied all right justified , mulitiplying options but unable to post a document. they are using string datatype & we r using the quant ..we have tried with all options with string datatype it is accepting at our end but from java side when they are passing Func. module is not accepting...any clue on it..any fm
Thanks & Regards
Gaurav Saxena

Yes U r right but I had made it string datatype and then right alligned and then again pass it to quantity field it is accepting at our end but failing while java application execution. it is giving the error " Maintain serial number for total quantity " that means it is taking some more quantity instead of 1 ( while passing i serial no.) something like 10,100.... so any suggestion..

In ML81N, Quantity Field allows maximum 3 digits after the decimal.

Hi Everyone!
        Hope things are going good.
        In SES, ML81N, The Vendor has a total invoiced value of $9033.5 .
        The Gross Price of the Product is USD 13,333.33
        The Quantity entered is                        .667 or .668.
         Both of the quanities entered gives a value which is $6 more or less.
        The only way to arrive at $9033.5 is to use quantity .6675 and the Quantity field does not allow the entry of more than 3 decimal digits.

Dont change the domain, as this has a huge impact on your system. At least talk to SAP before you are doing that.
I am just the opinion that you have a wrong unit of measure for your material.
You did not say what unit you use, but if it is KG, then you better use Gram to meet your requirement.

How can we remove the following zeros from quantity field ?

Hi All.
how can we remove the following zeros from quantity field while populating ALV by using FM REUSE_ALV_GRID_DISPLAY ?
eg:getting output zqty = 2.000
but i need           zqty = 2.
help me to reslove this issue.
Regards.
jay

Hi,
While populating the field catlog do the following thing to   avoid zeros.
wa_fieldcat-tabname = 'I_OUTPUT'.    " Curr
wa_fieldcat-fieldname = 'FWAER'.
wa_fieldcat-seltext_l = text-023.
wa_fieldcat-no_zero = 'X'.
APPEND wa_fieldcat TO i_fieldcat.
CLEAR wa_fieldcat.
Thanks,
Khushbu.

Make quantity field of Free goods as non-editable.

Hie!
I have free goods scheme of 9 + 1 .If quantity of main material is 10 then it will split into 9 + 1 where 1 is free of cost.
While making the sales order the free goods quantity field is editable. So the users are able to change the free goods quantity. I want to make this field as non-editable.
Please suggest how to do this.
Thankyou.

Hi Pallavi
If you change the manual qty which is automatically determined by the system then there will be a message thrown by the system
Suppse in your case if 9+1 you change the qty manually to 2 from 1 there is a message V1 no 737 thrown by the system
You need to change the message class thro ABAP development only not possible thro customization
Not only this in delivery also it is possible to change the free qty and this also has to be controlled by the ABAPer only
Regards
Raja

ALV QUANTITY field Geting converted into decimals ?

Hi All ,
I have developed an alv report .In that the quantity field is made editable after editing the quantity when i save it .It gets converted into decimals.Suppose if i give 77 its getting reflected as .077 all the field name ,table name ,reference field name, reference table name, quantity field data type has been passed but the problem persists.If there is any one whos has come across this kind of scenario please share your thoughts on this.
Best Regards,
Sreeram

Hi Sreeram,
I am not gettin this issue. See below code :
If you are gettiing the same issue with the below code then it has something to do with your user settings.
Go to Menu Item System -> User Profile -> Own Data -> Defaults ->Decimal Notation.
Set it to 1,234,567.89 and save. Now try the program again.
REPORT z_test.
TYPE-POOLS: slis.
TYPES : BEGIN OF ty_ekpo,
          ebeln TYPE ebeln,
          ebelp TYPE ebelp,
          ktmng TYPE ktmng,
          menge TYPE bstmg,
        END OF ty_ekpo.
DATA: it_ekpo TYPE TABLE OF ty_ekpo,
      it_fieldcat TYPE slis_t_fieldcat_alv.
SELECT ebeln ebelp ktmng menge
FROM ekpo
INTO TABLE it_ekpo
UP TO 20 ROWS.
PERFORM add_fieldcat USING 'EBELN'.
PERFORM add_fieldcat USING 'EBELP'.
PERFORM add_fieldcat USING 'KTMNG'.
PERFORM add_fieldcat USING 'MENGE'.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
   i_callback_program                = sy-repid
   it_fieldcat                       = it_fieldcat
TABLES
    t_outtab                          = it_ekpo
EXCEPTIONS
   program_error                     = 1
   OTHERS                            = 2
IF sy-subrc <> 0.
MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
          WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
FORM add_fieldcat USING p_fieldname TYPE slis_fieldcat_alv-fieldname.
DATA: wa_fieldcat TYPE slis_fieldcat_alv.
CLEAR wa_fieldcat.
wa_fieldcat-fieldname = p_fieldname.
wa_fieldcat-tabname = 'IT_EKPO'.
wa_fieldcat-ref_fieldname = p_fieldname.
wa_fieldcat-ref_tabname = 'EKPO'.
IF p_fieldname EQ 'KTMNG'.
    wa_fieldcat-edit = 'X'.
ENDIF.
APPEND wa_fieldcat TO it_fieldcat.
ENDFORM.                    " ADD_FIELDCAT
Regards,
Jovito

Quantity field in ALV

Hello All,
I am using OO - ALV in which I am displaying a quantity field.This field is an editable field and if user tries to change the value and SAVE , it is taking some wrong values.
Say suppose I am having 1.000 as the initial value and if user changes it to 2.000 and saves it is converted to .002.
I tried with qfieldname , ref_fieldname of fieldcat but of no use. Anything apart from this will be highly appreciated.
Regards,
Dhwani

User might be changing the value to only 2 and you might have declared the fieldcat with 2-3 decimal places. If you enter value with decimals say 2.001 it will take.
Otherwise you need to replace it with char value as Nanda has suggested.
Hope it helps.
Thanks,
Jayant

Quantity field total

Similar Messages

Maybe you are looking for