Quantity is Showing Blank : Bex Analyzer, Source - Bex Query Designer

Hello Expert SAP BI,
I Extracting Data from Flat File,
Till then Cube My Transaction data Loaded Perfectly ,
i want to create Report in Bex Analyzer, fetching fields from Bex Query Designer.
Characteristics are showing in Rows , that showing in Report , but in Columns added Key Figure , its not showing in Report .
Can any one Suggest , what will be issue and how i have resolve it.
- Thank you.

Datasource -> Transformation -> InfoSource
Infosource -> Transformation -> DSO
DSO -> Transformation -> Cube

Similar Messages

Execute button for BEx Analyzer in the Query Designer

Hello,
My current BEx Query Designer 7.1 and we are using Excel 2003. Currently, I can execute query through BEx Web but I am also looking for green check button of BEx Analyzer also. Could you please tell me how can I incorporate/add this BEx Analyzer check box in Query Designer so that I can execute query both in BEx Web as well as BEx Analyzer.
Thanks very much in advance.
Regards,
Md

Hello Hyma/Prasanna,
Thanks for your reply and it's solved my problem.
If I logon BEx Analyzer and open or changed query through it, I can see green check box in Query Designer. Now I can run query both in BEx Analyzer as well as BEx Web.
Regards,
Md

Query not showing detailed result when run through query Designer or Portal

Hi,
There is one query which not showing detailed result while running through Query Designer or run in Portal.
But strange thing is that it is showing the detailed result when i run it through BeX Analyzer.
While all the other queries don't have this problem in system. All showing the correct detailed result.
If anyone have some idea on this issue plz let me know.
Regards,
Javed
Edited by: Javed Akhtar on Jul 7, 2009 3:59 PM

Hi,
We can do this setting in WAD. Please check the web template and try to remove that setting. When you have hierarchy then we can display only till certain level in portal, this setting is done in web template APIs, but in bex analyzer you can see all the detailed information.
Edited
Go through this thread for some more detailed information
http://help.sap.com/saphelp_nw2004s/helpdata/en/44/7b5f0a95ce12d0e10000000a422035/frameset.htm
Regards,
rik

Difference between Bex Analyzer and Bex WAD

Hi Every one,
I am pretty new to SAP, and working on SAP BW Front end.
I am pretty aware of Bex Analyzer and also Browser, but i always have a doubt about Bex WAD.
In my present job i talk to the users and take the requirments and create queries in the Bex analyzer which i am comfortable doing it.
I also know all the features of Analyzer and created quries and also published it on web, and also created workbooks and inserting multiple quries in the workbook etc etc..
However i have zero knowledge on WAD and how it is useful to me, and as if now i haven't got any requirment from the client for me to create any report in WAD or do some thing in WAD.
I have gone through SAP SDN help etc but i am not understanding it at all.
So can any one explain me in a laymans terms what WAD is and how it will be useful to me?
and also if possible send me link which has got PDF screen shots of what WAD is?
Points is for sure.
Regards,
Ram

Raj,
Thanks for the reply, but i still did not get the understanding about WAD. i have studied the link which you sent me.
I am still not able to understand how it is helpful for people like me,
See i create my report in Query designer, and i can execute the query in Analyser. and if i want i can execute it in the Web from my query designer, and also i can create chart on the web if i want.And i can Broadcaste it in the Web.
and also if i want i can create it in the workbook and create chart in that work book.
Then what is the point of Web Application Designer (WAD).
See i have created the Query in Designer in Development say Sales report Query on the infoprovider for SD, now what should i do with it in WAD.
How can i get it in WAD, i went to start> all Programs>Bex> WAD and i logged in to development and a sereen opend. And from here what i can do, i mean how can i open my created query in WAD?
As you guys know i am new to SAP itself, but i dont see any advantage about WAD, i read all the articals and there i found that i can create Web Items, HTML etc etc, but i already have HTML, when i execute my query from the Designer i get it in Web Browser...
See my question is simple, i have a query which i have created in the Query Designer, now how can i get it to WAD and after getting it what can i do with it??
If any one has a screen shots of there pls send me.
And Sanjeev has sent me a PDF which i saw earlear and i done the same in my WAD but i am not about to get it to work.
I have given the points to every one but still what i need i did not get yet.
Regards,
Ram

BEx Analyzer Workbook, display query 2 under query 1

Hello Guys,
actually I got a problem and did not find a solution for that.
I have a query, displaying all cars from one particular salesorg. Under this query I want to add a new query displaying all other cars, not belonging to that salesorg. Now I have two problems:
1) Is there an automated way to display one query among another in bex analyzer, if the number of rows in each query is not constant?
2) Can I negate the variable from my first query (not salesorg in first query)?
Thank You!
Markus

Hi Markus Alber,
why can't you do this in one query?
You can create two selections:
One for that particular salesorg can use restriction on "salesorg"
another selection uses "salesorg" restrictions of excluding that particular salesorg
Feng

BEx Analyzer - Start BEx when Excel starts

Hi,
Our company uses MS 2010. We recently installed BEx Analyzer to several employee's PCs. On ONE out of 5 PCs, the user must re-check the box under Global Settings for "Start BEx Analyzer when Excel starts" every time she starts her PC each day. It stays checked until she shuts down the PC. What could be wrong? What should I look at?
Thanks,
Debbie

so at the end of day when she shuts off and log in again analyzer doesnt open in excel again.?
there is way to do that in excel to open a program .. may be they can help.
only thing i can think of that she deletes her cookies when she logs off so excel cant save it properly.
http://office.microsoft.com/en-us/excel-help/customize-how-excel-starts-HP005199391.aspx

Launching BeX Analyzer from BeX Query Designer

Hi,
We are using BeX Frontend version 7.x.
In the Query Designer, when you presss the 'Execute' button, it generally opens the report on the web (calls the portal). Is there any way to change this so that when you press 'Execute', it runs the report on the BeX Analyzer?
Best Regards,
Rajib

Hello...
I regret to inform you, there is no way to do such a thing.
You cannot call via "Query Designer" the "BEx Analyzer".
I don't thing my suggestion is very helpful, but as workaround, you can call via SAPGUI, with transaction RMMX.
I personally suggest you to install and use the BI Java stack, since the BI 7.0 addons was designed to work together with an BI Java Portal.
Thanks...
Best regards,
Edward John

Using Variants Created in BEx Analyzer in BEx Broadcaster

We are experiencing an issue where variants created in BEx Analyzer are not available to be selected in BEx Broadcasting.
What we are trying to achieve is when we have a Variant that is created in BEx Analyzer, we want to use the same variant in our BEx Broadcaster, which is found under the Tab General Precalculation and the option Determine from Variants.
For some background, we are on NW04S Patch 9 with BEx Front End 3.5 Patch 10.
Does anyone have any inisight on this issue?
Thanks.

Please disregard question.

BEx Analyzer cannot open query, button is in German

Hi Gurus,
I am using MS Excel 2003 and have installed all windows updates. I even have successfully installed the patch KB907417 from Microsoft, but still I cannot open queries using BEx Analyzer. The BEx icons display German labels instead.
How should I fix this?
Please recommend links for SAP GUI and BEx updates and patches.
Thank you very much!
Regards,
Btup

Hi Btup,
First just try to install Install Microsoft Excel patches version of Excel is: Excel 2003 (11.8169.8172) SP3 and see how it goes.
If it doesn't work then try following steps:
Install SAPGUI 710 to Level 4
Install bw350gui710_1-10004473.exe to install patch BI 3.x to Level 1.
Install bw350gui710_2-10004473.exe to install patch BI 3.x to Level 2.
Install bi710_2-10004472.exe to install patch BI 710 to Level 2.
Install bi710sp02p_201-10004472.exe to install patch BI 710 to SP2.
Install bi710sp03_300-10004472.exe to install patch BI 710 to SP3.
Install bi710sp04_400-10004472.exe to install patch BI 710 to SP4.
Install Microsoft Excel patches version of Excel is: Excel 2003 (11.8169.8172) SP3
Regards,
Shalin Shah

BEx Analyzer versus BEx Web Analyzer and BIA performance

Hi Experts,
Recently I tested the performance of a few of our queries running off Infocubes with indexes loaded to the BIA and I noticed some differences in performance when using BEx Web Analyzer versus BEx Analyzer in Excel. Seems that when using the Web Analyzer the query returned the result at a much faster rate than when using BEx Analyzer in Excel. I did notice that the slow point in Excel is at the "Formatting Results Areas" stage. This can take up a long time to complete. My question is, does anyone else experience this? What could be the cause? Is this normal behaviour? Any recommendation to solve this?
Thanks very much.

Hi David,
Yes, Excel-based BEx Analyzer is almost always slower then Web (and especially on 3.x tools), and it has not much to BIA.
For web - formatting is happening on the BI server and then result is transferred to end-user machine in one shot (or as many shots as individual MIMEs to transfer). For Excel - first you have a transfer of data set to your PC (that might require several round-trips) and then formatting is all on the PC.
Possible ways to improve:
1) Check that your anti-virus does not impact opening excel workbook
2) Upgrade PC hardware (absolutely seriously)
3) Switch off formatting of workbook or at least remove exceptions and total/subtotal lines.
Regards,
-Vitaliy

BEx Analyzer: Exchange characteristics with design item "Button"

Hello everyone,
I am creating a workbook with the BEx Analyzer. The user should be able to exchange one characteristic with another one by a button click (e.g. replace the drilldown of characteristic product group by a drilldown of customers).
I inserted a button in the design mode and edited it with the command wizard.
In the area for the static parameters I inserted the following:
Name/Index/Value
DATA_PROVIDER/1/DP_1
CMD/1/EXCHANGE
IOBJNM_1/1/Product Group
IOBJNM_2/1/Customer
I tried several variations of this, but they all didn't work.
Does anyone know how to define such a command?
Thanks in advance for your answer,
Rainer
Message was edited by:
Rainer SIGG

Hi,
Button Design item is used to perform three types of functionalities
1. Workbook specific Commands : these are helpful in performing any changes or navigations in the workbook. For example moving from one sheet to another on the click of the button can be realised.
2. Planning Specific Commands : these are used mostly when a planning scenario is realized using the Bex workbook. Planning commands usually would be to save data in the workbook created on an input ready query to the plan cube, or to execute a planning function or a sequence.
3. Data provider specific commands : Commands used to change data based on a spcfiic dataprovider.
Let me know if you are looking at anything else other than this.
Regards
Snehith.

Bex Analyzer 70 opens query but does not display results

Hi Gurus,
My computer is windows XP 2002with Service Pack2. I have MS Office 2003.
My SAP GUI is 7.1 with SP 5. ( I am unable to install Windows XP SP3 on my computer).
70 Analyzer is not working for me. When I log in, the XL sheet comes up but the Bex realted icons are not showing up.
When I open 3.x Analyzer, it works fine. The XL has BEX icons andI can open the query and get results.
Any suggestions are greatly appreciated andI would award points.
Thanks in advance.

Rao,
This is common problem.
Try to get latest patches in 7.0 and u can take help of any Basis person.
bhaskar

WEB BEx Analyzer Comments on Query level

I would like to enable BW users to create comments for some queries an enable other user to read them. System BW 7.01.
Issues and questions:
-how to create comment on query level - it's always on data (KYF), Metadata or Master data level
-I would like to show the document icon - next to the query title (it's relevant for the query)
-when I create Comments (with the button in the standard template), it's on the data level (combination of KYF) - and when I
switch to icon display (settings) I get icons in every line. If this would be just at KYF header??
-where can I edit, delete, ... recorded comments
Thanks, Tom

Hi Tom,
1) If you want to create comments on query level, you need to create metadata documents, object type 'ELEM', object name is the technical name of the query.
2) Document icons are always shown in the data table. Thus it will be hard to show a document icon for a document on query level. If you are using web templates, you can insert a single document item on metadata documents to display the comment on the query.
3) Where the document is displayed depends on the document properties. If a characteristic is document property depends on the infoobject setting -> transaction RSD1 -> enter the characteristic -> tab 'general'.
To see the document properties you can execute the query for example in RSRT (html mode) -> create a new document on any cell. On the bottom you will see the document assignment. Compare this assignment with the cell next to it. If its the same the document will be displayed in both cells. The same can be done for example in java web -> create a new document and switch to the second tab ('BI').
4) Documents can be edited and deleted in the document browser itself, when you open the document in the executed query or in transaction RSA1 -> documents.
Best regards,
Janine

URGENT: SAPBEXonRefresh or Callback in BEx Analyzer after opening query

Hi everybody,
I'm trying to create an standard excel sheet which should be used by default when opening queries. This works so far...
My goal is to change the format of specific cells in order to get a nice layout and design. If I use the functions SAPBEXonRefresh or Callback (used in the SAP standard sheet) it is just possible to change the format after a refresh. I want to access the cells after the selection of the query, when it's first launched. This does not seem to be possible...
The functions are declared in the sheet settings dialog and the corresponding sheet is also declared as default in the global setting.
Now I have to first open the query, which also opens the standard sheet. Second I have to manually do a refresh, that the code in the functions can work as expected.
Does anybody of you has an idea or solution?
Thanks in advance,
Joerg
Message was edited by:
 Joerg Gramenz
Message was edited by:
 Joerg Gramenz
Message was edited by:
 Joerg Gramenz

hi Jörg Gramenz,
My requirement is also the same.
can you please share in detail how exactly you solved it.
its very urgent.
thx,
raps.

BLANKS as Zero in the query designer

Hi,
I had a restricted KF for which there are no entries in cube (for the restriction) or the KF values are 0 in cube....
When i execute the query...i ma getting the Blank for that KF....how can i convert BLANK into 0 in the report
My requirment is to show 0 for all Blanks
Thanks

Try to use calcualted key figure as follows with res. Key figures as follows
(Res Key figures "is not initial") * res key figure.
Now system will display 0 where ever you get blank.
Do reply with comments.

Quantity is Showing Blank : Bex Analyzer, Source - Bex Query Designer

Similar Messages

Maybe you are looking for