Quantity of result in Target Group

Hi alls;
I've created a target group with 1601 accounts, but when i go to see the accounts of the group, just shows 100. How can i modify to see all accounts?
Regards.

HI,
May be this topic help you:
http://wiki.sdn.sap.com/wiki/display/CRM/UsageofConfiguration+Params
"Increasing the maximum number of search hits from default value 100 to any other value"
But I don't know exactly.
Denis.

Similar Messages

  • Passing result list from Contact search to Target group

    Hi,
    I have to pass the result list of Contact serch(BP_CONT_SEARCH) to Target group creation component(SEGED_TG). Can you give me the steps that I need to follow.
    Note: Here the contact structure is different in each component.
    Thanks.

    Yes Srikanth, you need to bind context of result list to SEGED_TG using component controller binding. Let me know if you have questions.
    But the question is did you make a navigation from the contact search result to target group creation or is it a standard functionality ?
    As per my knowledge we can navigate from Profile set creation creation screen or from Trade Promotions.

  • Enhance target group result list

    Hi *,
    I'm faced a requirement to enhance the result list of a target group with some SAP standard fields. Essentially persons and organizations data have to be combined in one list to export to excel.
    In the configuration I found # 30 "blank" fields to use for this purpuse. Unfortunately I have no idea how to fill these fields.
    Any suggestions.
    Thanx a lot.
    Kind regards
    Thomas

    Hello Thomas,
    you can use BAdI CRM_MKTTG_SEG_MEM_EX to enhance the structure CRMT_MKTTG_GENIL_TG_I_ATTR. This contains up to 30 user defined fields. Please refer to the customizing:
    --> Marketing --> Segmentation --> Business Add-Ins (BAdIs)
    --> BAdI: Define Display and Export for Target Group Members List
    The fields are then mapped to the context node TARGETGROUPITEM in view SEGED_HV/TargetGroupItemEOL.
    best regards,
    Johannes

  • Creation of Target group.

    Hi All,
    I having one urgent requirement, we have maintained the Ztable for maintaning the information of Vehicles against Business partners.
    The Fields in the said Ztables are Vehicle type, vehicle Reg Number and BP number.
    I want to send the mails using target group to customer who is having Perticular vehicle type for that i have created Infoset using the Ztable, then i have created the data source for target group still i m not getting the desired result !!!!!!
    please anybody tell me that i  missing any of step for above requirement ???
    how to link up the BP to Ztables fields ???
    How to create the said Target group ???   
    Regards,
    Dipesh

    Hi,
    You can try this alternative solution:-
    Instead of maintaining vehicle type etc in Z table, please crate it as "attribute", and assign it to Business Partners.
    You can use CRMD_PROF_BP transaction to assign Attributes to Business partners.
    Based on the attributes , you can subsequently create the "target group".
    Regards,
    PD
    Pl. Reward points if it helps !!

  • How to see target groups in Data Target in the APD

    Hi everybody.
    I am trying to make a marketing segmentation of customers in the APD (BI) and I need to send the results to a target group in CRM, my problem is that I can´t see target groups in the u201CData Target CRMu201D.
    I select the Logical System and when I select the Data Target the system shows   CRM error: Data target TARGET_GROUP_FROM_B not known.
    I know that the communication is OK, the RFC is working cause I can see Marketing Attributes (I released data target for replication and maintained attributes) but I don´t know if I need to do something similar with Target Groups of CRM or how.
    Does anyone have an idea how can I see target groups in the window of the Data Target?
    Thanks.

    Hello,
    I have seen  this problem in other systems and it was caused by a GUI bug. Can you please check that you have the latest GUI patch installed for your GUI  release.
    Best Regards,
    Des

  • Creating Target group with Bi Query

    Hi,
    I am trying to create Target group with BI query, for that I created one query on real time info cube  with 0BPARTNER, 0BP_GUID  and selected all navigational attributes.  In the query info object properties u2013 Advance setting I selecting u201C Values from Master Data Tableu201D  & Access Type u201C Master Datau201D , In query Property u2013 selected u201C Allow External Access to Queryu201D
    In CRM while creating Data source I can see the In objects selected in   the query u2013 selected Business partner info object as 0BP_GUID ,In the attribute list I just selected one item Industry code against the above data source, while running the Segment Builder when I selected the industry code it gives me 0 business partner where as I am having 20 BP with that Industry code.
    I appreciate your help ASAP.
    Regards,
    Rajiv Jain

    Hi Rajiv
    I have the same issue with my BI Query. Hope you have resolved by now, if you have please do let me know.
    What we have done is, created a BI Query and used this query in in CRM datasource, then created some filters where i can see the objects in the query while creating filters in Attributes List. But when we use these filters to create Target group, its not resulting any results in the query, i mean not brining any values on segmentation area. This issue is only in Production as we have already tested in Test and passed without any problems. But in Production we have this issue, i m not sure why this is happening, i spoke to BW team regarding this and they are not sure eitherl. If you know could you please let me know
    Thank you in advance
    Regards
    shankar

  • Clustering model ..target group creation ...error

    Hello All
    After i created a Clustered model successfully i went ahead to create a CRM target group and as the last step in the process I selected the Training source of my Clustering Model ,right clicked it and clicked Monitor
    The result shows that the CRM target group creation was incorrect.The following screeen shows the error screen.
    http://www.geocities.com/aditya_ponnam/errorscreen.JPG
    Please advise.
    Thank you
    Aditya

    Hi naveen
    Thank you.How can I check the RFC setting for my CRM system?Has it got anything to do with this problem?I have just started learning SAP BW and CRM.Please suggest.As a matter of fact, this error occured in the BW system.The version of BW system is 3.1 Support Package 6.I could not figure out anything from the error description.Please look at this error screensot.
    http://www.geocities.com/aditya_ponnam/errorscreen.JPG
    Thank you
    Regards
    Aditya

  • Combine Profiles and Target Groups -Segmentation

    Hi Experts,
    I have a requirement where I will need to join profiles with other profiles and Target groups. I checked in help.sap and I saw the following sentence regarding combining the profiles.
    In addition to attributes, you can also combine profiles with other profiles and with target groups.
    Example
    You select a profile from the components area, drag it onto an existing profile in the staging area and choose keep. The resulting profile contains the attributes contained in both profiles as inclusive conditions.
    How do I get the Profiles and the Target groups in the Components area? I can only view the existing Attribute lists. Is there any setting that I have to make to see the existing profiles and target groups ?
    Any help will be greatly appreciated.

    Hi Pooja,
    which version of the product do you use? CRM 2007?
    Scenario 1) I need to combine 2 profiles with an 'OR' condition and create target groups out of the combined profile. How do I accomplish this? Is there any method to combine profiles in the Graphic Modeler?
    => You could have 2 profiles in a profileset and create the target group for the complete profileset. Then the results are "OR combined".
    => Alternatively you can create a new profile which consists of all attributes and create a target group for this profile.
    Scenario 2) If we have 2 profiles and a target group in a profile set how do I create a Target Group for all the BP's in the Profile set. The only selection criteria in the Graphic Modeller for me right now is Attribute lists. How do I select Target Groups and Profiles
    => Just create the target group for the complete profile set, then one consolidated target group is created.
    Does this help?
    Regards, Guido.

  • Surveys for particular target Group

    Hi All,
    I am attempting to create a survey for a specific target group. To do this I am using the SURVEY transaction. In the SAP documentation after creating the survey  and Inserting a new question, it states to click on TRANSFER. This should allow me to enter question text. However the TRANSFER option is not available to me. Has anyone come across this before?
    I have created surveys using CRM_SURVEY_SUITE but can only attach these to transactions and not to specific target groups?
    Any ideas on how I could get around this.
    Thanks in advance,
    Mícheá

    Hi Nagarajan/Joseph
    Thanks for the replies.
    i got  this query which has been used when Quantity in GRPO > PO a approval template comes like the pic shown below
    "Select Distinct 'True' from POR1T0  Where $[$38.11.Number] > T0.Quantity and T0.docentry=$[$38.45.0]
    Like this when there is change in the PO quantity compared to GRPO this approval pops up
    .But quantity would come in row level rite ?.
    Please let me know how this query can be modified when comes to item group
    Thanks & Regards
    Darshan Desai

  • Segmentation and Target groups

    Hi,
    Is there a way to create sub-sets of Target Groups so that whenever users run a campaign, the system does not have to go back todatabase tables to filter data, but it is done in sub-sests only to enhance system performance.
    Regards,
    Monica

    Hi Pooja,
    which version of the product do you use? CRM 2007?
    Scenario 1) I need to combine 2 profiles with an 'OR' condition and create target groups out of the combined profile. How do I accomplish this? Is there any method to combine profiles in the Graphic Modeler?
    => You could have 2 profiles in a profileset and create the target group for the complete profileset. Then the results are "OR combined".
    => Alternatively you can create a new profile which consists of all attributes and create a target group for this profile.
    Scenario 2) If we have 2 profiles and a target group in a profile set how do I create a Target Group for all the BP's in the Profile set. The only selection criteria in the Graphic Modeller for me right now is Attribute lists. How do I select Target Groups and Profiles
    => Just create the target group for the complete profile set, then one consolidated target group is created.
    Does this help?
    Regards, Guido.

  • Transport target group

    Hi All,
    We have one transport target group  /DEVALL/ .Which we deleted and created two target group for importing into different client as /DEV100/ and /DEV200/.
    Now alll transport request which has been assigned to /DEVALL/ are coming as a local request and after released they were not going to import in any of the client.
    Please let us know the way by which we can assign new target group (/DEV100/ and /DEV200/) to all these change requests (TR's).
    As we can manually  assign target to change request at the time of import.But we want to find out the way of assign target group before releasing the TR's
    Thanks in advance for your valuable and fast response.

    Hi Sumit,
                 I am only aware of making this change using transaction se09 and se10. You select the change request number 'Not the task' by double clicking on it. In the resulting screen, select the properties tab. The 'Target' field in the screen can be used to perform the reassignment.
    Sajit

  • Target Group to Channel - Trying to use 2 channels when only 1 is specified

    I have created a Target group and then in the marketing planner create a campaign. Under the channel I have specified Phone which is linked to creating a transaction. I activate the campaign and then choose target group to channel.
    The job is scheduled and does run.... However it ends in error saying "No Mail form exist for communication channel Email"
    so no transactions are saved.
    I am confused as I only specified the channel to be Phone NOT email..... I do not want to send any emails for this.
    Has anyone encountered this problem before and can they advise on the solution.
    Many Thanks
    Caroline

    So is question too easy that no one wants to respond?  Since the new 10.7.3 update I can see the same result on the file sharing page where it shows who's logged in. Am I the only showing 2 of the same users logged in?
    I was thinking because I created users and then deleted them, and the re-created the same users that's why it's occurring. When I log in from a windows machine I only see 1 user with a SMB share. But when I log in from Mac I see 2 users with the AFP share. Both users are exactly the same.
    Here's one more bit regarding this. If I log in on Mac with Lion then there are 2 duplicate users and if you wait a few minutes only 1 of duplicate users will show time. The other does not. But if I log in from a Mac with Snow Leopard then it shows 2 duplicate users as above but neither of them show any time.
    I can't be the only peron having these problems can I?
    So if these duplicate users were caused from me creating and deleting users, where (what file) is the user name stored?
    Please someone.
    Tony

  • Campaign Details from Target Group

    Hi All,
    I have a requirement, in which from the GUID of the Target Group, i need to fetch the details of the Campaigns in which it is assigned (There will be multiple assignement).
    I found two Tables for this:
    1. CRMD_MKTPL_TGGRP : Field: TARGETGRP_GUID
    2. CRMD_MKTTG_TG_H : Fields: SET_H_GUID, SET_GUID, PROF_GUID
    My logic was to join these table for getting the Campaign for each Target Group, but unfortunately i didnt find any common data in between the field TARGETGRP_GUID of CRMD_MKTPL_TGGRP and above stated 3 fields of the CRMD_MKTTG_TG_H.
    is there any FM available for getting the Campaign details from the Target Group?
    Please share your comments.
    Regards
    Dave

    Hi Dave,
    Did you try to use the dynamic query SEGTgAdvQuery?
    this is a Dynamic query that searches for Target Groups. The result BOL Object contains a relation SEGTgTgCampaignRel that contains all Marketing Campaigns for that Target Group.
    here is how you could call the dynamic query.
    data:         lr_query_service          TYPE REF TO cl_crm_bol_dquery_service,
            lr_selection_param        TYPE REF TO if_bol_selection_param,
            lr_selection_param_buil   TYPE REF TO if_bol_selection_param,
            lr_tg              TYPE REF TO cl_crm_bol_entity,
            lr_mkt           TYPE REF TO if_bol_entity_col,
            lr_query_result           TYPE REF TO if_bol_entity_col,
          lr_query_service = cl_crm_bol_dquery_service=>get_instance( 'SEGTgAdvQuery' ).
          IF lr_query_service IS BOUND.
            CALL METHOD lr_query_service->insert_selection_param
              EXPORTING
                iv_index           = 1
                iv_attr_name       = 'ID'
                iv_sign            = 'I'
                iv_option          = 'EQ'
                iv_low             = '12345'      "This is your Target Group ID
              RECEIVING
                rv_selection_param = lr_selection_param_buil.
            lr_query_result = lr_query_service->get_query_result( ).
            lr_tg ?= lr_query_result->if_bol_bo_col~get_first( ) .
            IF lr_tg IS NOT INITIAL.
              lr_mkt ?= lr_tg->get_related_entities( 'SEGTgTgCampaignRel' ).
    NOW YOU HAVE THE LIST OF MKT CAMPAIGNS...
            ENDIF.
         ENDIF.
    hope this helps.
    Kind regards,
    Micha

  • How to create a sample from a target group

    Hi experts:
    When I create a target group I want to create a sub target group of this. (a sample)
    The objective is to test a marketing campaign with a sample, according of the results we decide to make the real marketing campaign with all the members of the original target group.
    Thanks in advance for your inputs
    Susana

    Hi
    The CRM version is 7.0
    Thanks
    Susana

  • Send data from APD to CRM target groups

    Hi everybody.
    I am trying to make a marketing segmentation of customers in the APD (BI) and I need to send the results to a target group in CRM, my problem is that I can´t see target groups in the u201CData Target CRMu201D.
    I select the Logical System and when I select the Data Target the system shows   CRM error: Data target TARGET_GROUP_FROM_B not known.
    I know that the communication is OK, the RFC is working cause I can see Marketing Attributes (I released data target for replication and maintained attributes) but I don´t know if I need to do something similar with Target Groups of CRM or how.
    Does anyone have an idea how can I see target groups in the window of the Data Target?
    Thanks.

    Does someone have the manual CR900? the manual BW380 sais that there is the information I need, Is there a kind soul that can help me? I will thank it a lot.

Maybe you are looking for