Quantity problem in sale order
Dear Friends,
I had a problem in sales return order. The problem was when i take sales return with the reference to invoice it coping all the data from invoice, up to this point ti is fine, If i changed in line item material quantity 10 insted of 100. In condition it is not reflecting the value, it is capturing hole invoice value insted of picking 10 quantity.I need to solve this problem as a priority 1 so help in this issue.
Regards
Eswar
Dear eashwar
Check the copy control in VTFA whether these are maintained for your item category.
Copying requirements 002
Data VBRK/VBRP 002
Billing Quantity A
Pos/neg.quantity +
Pricing Type D
I think in either of the above, your settings differs and hence the problem. If it differs, please maintain the above and retry.
thanks
G. Lakshmipathi
Similar Messages
-
I have a problem regarding sales order line item with confimed quanity
Hi Experts,
I have a problem regarding sales order line item with confimed quanity with '0' with delivery block but confirming the sales order quantity once the order is released from credit check.
The situation arises as per the below scenarios.
Scenario - 1 - When the sales order has two line item - one line item with confirmed qunaity in the schedule line and for the 2nd line item there is no available stock for the Material xxxxxx.
Initially the sales order is created for the line item 2 with confirmed quantity = 0, and having the delivery block = 01 for the Material xxxxxx and the order is set with credit check. Once the order is relased from the credit check. The quanity for the item 2 where the confirmed quantity will be = 0 ( Where it is not changing the confirmed quantity)
Scenario -2- Updating the order qunaity for the line item 2 as (9Pcs) it will goes to credit check and save the order.
Maintain the stock for the line item 2 ( 5 Pcs).
Once the order is released from the credit check. Then for the line item 2 the confirm quanity will be seting to 5 Pcs with Delivery blcok 01.
This should not happen, When the credit check is released even though if it has stock based on the delivery blockl it should set the confirmed quanity to Zero.
Can you please help me how to solve this issue.
Looking forward for your reply.
Thanks and Regards,Hi,
I agree with your point. In the sales order When the complete delivery check box is enabled where the confimed qty is set to zero, it is fine but when we save the orderr it goes to credit check. Once we release the order using VKM3 where in the sales order the confimed quantity is setting to 5, But it should set to Zero quantity. Quatity should not be get confirmed it should be Zero Quantity.
Further in SPRO - customizing in the deliveries blocking reasons - It has a tick mark in the confirmation blcok. But we dont want to remove the - Confirmation Block tick mark
Please any one can help me if you have any solution to solve this problem.
Thanks and Regards. -
BAPI - Problem in Sales order creation
Hi Friends,
I have problem in Sales order creation using BAPI ,I am getting a messsage - Error in creating document ,I have sent the code along with this mail ,can you help it out.
Code:
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 2(20) v_text FOR FIELD p_auart.
PARAMETERS: p_auart TYPE auart OBLIGATORY.
SELECTION-SCREEN END OF LINE.
Sales organization
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 2(20) v_text1 FOR FIELD p_vkorg.
PARAMETERS: p_vkorg TYPE vkorg OBLIGATORY.
SELECTION-SCREEN END OF LINE.
Distribution channel
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 2(20) v_text2 FOR FIELD p_vtweg.
PARAMETERS: p_vtweg TYPE vtweg OBLIGATORY.
SELECTION-SCREEN END OF LINE.
Division.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 2(20) v_text3 FOR FIELD p_spart.
PARAMETERS: p_spart TYPE spart OBLIGATORY.
SELECTION-SCREEN END OF LINE.
SKIP 1.
Sold-to
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 2(20) v_text4 FOR FIELD p_sold.
PARAMETERS: p_sold TYPE kunnr OBLIGATORY.
SELECTION-SCREEN END OF LINE.
Ship-to
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 2(20) v_text5 FOR FIELD p_ship.
PARAMETERS: p_ship TYPE kunnr OBLIGATORY.
SELECTION-SCREEN END OF LINE.
SKIP 1.
Material
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 2(20) v_text6 FOR FIELD p_matnr.
PARAMETERS: p_matnr TYPE matnr OBLIGATORY.
SELECTION-SCREEN END OF LINE.
Quantity.
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 2(20) v_text7 FOR FIELD p_menge.
PARAMETERS: p_menge TYPE kwmeng OBLIGATORY.
SELECTION-SCREEN END OF LINE.
Plant
SELECTION-SCREEN BEGIN OF LINE.
SELECTION-SCREEN COMMENT 2(20) v_text9 FOR FIELD p_plant.
PARAMETERS: p_plant TYPE werks_d OBLIGATORY.
SELECTION-SCREEN END OF LINE.
Data declarations.
DATA: v_vbeln LIKE vbak-vbeln.
DATA: header LIKE bapisdhead1.
DATA: headerx LIKE bapisdhead1x.
DATA: item LIKE bapisditem OCCURS 0 WITH HEADER LINE.
DATA: itemx LIKE bapisditemx OCCURS 0 WITH HEADER LINE.
DATA: partner LIKE bapipartnr OCCURS 0 WITH HEADER LINE.
DATA: return LIKE bapiret2 OCCURS 0 WITH HEADER LINE.
DATA: lt_schedules_inx TYPE STANDARD TABLE OF bapischdlx
WITH HEADER LINE.
DATA: lt_schedules_in TYPE STANDARD TABLE OF bapischdl
WITH HEADER LINE.
Initialization.
INITIALIZATION.
v_text = 'Order type'.
v_text1 = 'Sales Org'.
v_text2 = 'Distribution channel'.
v_text3 = 'Division'.
v_text4 = 'Sold-to'.
v_text5 = 'Ship-to'.
v_text6 = 'Material'.
v_text7 = 'Quantity'.
v_text9 = 'Plant'.
Start-of-selection.
START-OF-SELECTION.
Header data
Sales document type
header-doc_type = p_auart.
headerx-doc_type = 'X'.
Sales organization
header-sales_org = p_vkorg.
headerx-sales_org = 'X'.
Distribution channel
header-distr_chan = p_vtweg.
headerx-distr_chan = 'X'.
Division
header-division = p_spart.
headerx-division = 'X'.
headerx-updateflag = 'I'.
Partner data
Sold to
partner-partn_role = 'AG'.
partner-partn_numb = p_sold.
APPEND partner.
Ship to
partner-partn_role = 'WE'.
partner-partn_numb = p_ship.
APPEND partner.
ITEM DATA
itemx-updateflag = 'I'.
Line item number.
item-itm_number = '000010'.
itemx-itm_number = 'X'.
Material
item-material = p_matnr.
itemx-material = 'X'.
Plant
item-plant = p_plant.
itemx-plant = 'X'.
Quantity
item-target_qty = p_menge.
itemx-target_qty = 'X'.
APPEND item.
APPEND itemx.
Fill schedule lines
lt_schedules_in-itm_number = '000010'.
lt_schedules_in-sched_line = '0001'.
lt_schedules_in-req_qty = p_menge.
APPEND lt_schedules_in.
Fill schedule line flags
lt_schedules_inx-itm_number = '000010'.
lt_schedules_inx-sched_line = '0001'.
lt_schedules_inx-updateflag = 'X'.
lt_schedules_inx-req_qty = 'X'.
APPEND lt_schedules_inx.
Call the BAPI to create the sales order.
CALL FUNCTION 'BAPI_SALESDOCU_CREATEFROMDATA1'
EXPORTING
sales_header_in = header
sales_header_inx = headerx
IMPORTING
salesdocument_ex = v_vbeln
TABLES
return = return
sales_items_in = item
sales_items_inx = itemx
sales_schedules_in = lt_schedules_in
sales_schedules_inx = lt_schedules_inx
sales_partners = partner.
Check the return table.
LOOP AT return WHERE type = 'E' OR type = 'A'.
EXIT.
ENDLOOP.
IF sy-subrc = 0.
WRITE: / 'Error in creating document'.
ELSE.
Commit the work.
COMMIT WORK AND WAIT.
WRITE: / 'Document ', v_vbeln, ' created'.
ENDIF.
Regards,
Dineshwhat messages u are gettting in RETURN ? Please check the RETURN tables data.
[code]CALL FUNCTION 'BAPI_SALESDOCU_CREATEFROMDATA1'
EXPORTING
sales_header_in = header
sales_header_inx = headerx
IMPORTING
salesdocument_ex = v_vbeln
TABLES
return = return
sales_items_in = item
sales_items_inx = itemx
sales_schedules_in = lt_schedules_in
sales_schedules_inx = lt_schedules_inx
sales_partners = partner.
Regards
Prabhu -
Quantity confirmed in sales order change mode not in display mode !!!
Dear All !!
We have a problem in sales order .
In sales order the line item 580 quantity confirmed 15 pc in change mode VA02 if I open the sales order in display mode VA03 the quantity confirmed “0”
More details refer the attachment .
Kindly advise why the system behaving like this and suggest how to control.
Thanks in advance.
Best Regards,
RampeDear All !!
The issue has been sort it out .
Reason for cause : The Problem happened due to wrong material master data defined in material master.
The material has been changed and marked "as configurable material" in material view "Basic Data 2".Even though the material is not configurable. So we have forced correct value in material master and open the sales order with VA02 and then saved in order to redetermine correct master data. Then the problem got resolved.
Thanks for your Help.
Best Regards
Rampe -
Propose order quantity in return sales order
Hello Experts,
I have a requirement where while creating return sales order with reference system should propose total delivered quantity instead of quantity in original sales order.
I tried to copy routine 151 in VOFM but after the changes proposed quantity in return sales order is appearing as addition of original sales order quantity and total delivered quantity.
example:
Original sales order is having quantity = 100
total delivered quantity = 45.
default proposed return sales order(with reference) quantity = 100 (here system should propose 45 not 100)
In copy routine if I change VBAP-KWMENG to 45 then in return sales order system is proposing 45 + 100 = 145 but I need system should only propose 45.
I had searched the community but no where I found the solution.
Please help.Hi,
The problem is we can not go with the process i.e. to create return sales order with reference to billing document as there are many other customizations already developed on existing process of creating return sales order with reference to sales order.
So we need the solution in which return order(RE) should be created which should propose quantity as the total delivered quantity with reference to sales order.
For the reference order only delivery document is posted in the system. -
How To Get The Total Delivered Quantity of a Sales Order
Hello All,
I have a requirement of getting the total delivery quantity of the sales order .I have checked it in LIps table but I am getting partially delivered quantity for a schedule line item.Can any one tell me how to get the total delivered quantity.
Regards,
Pavani.Hi
Check the Table:
VBEP - Sales Document: Schedule Line Data.
Inside the table check the Quantity Fields.
Regards,
Sreeram -
Condition Period Problem in Sales order - Need help
Hi Gurus
I am testing Sales Order back dated
Condition period Problem in Sales order
example for you to understand
Sales Order where PO date is 17.12.2007
Del Date & Price date is 13.02.2008
Then it is not calculating IN: A/R BED %IN A/R BED totalN A/R CESS [1621]
But if i do it after 14 feb 2008 then it is calculating IN: A/R BED %IN A/R BED totalN A/R CESS [1621]
When I do it with current date it is calculating IN: A/R BED %IN A/R BED totalN A/R CESS [1621] say date is 9-5-2008
I am not able to trace out problem, kindly help me from where I do I check and why this is happening.
Rajesh ChalkeHi,
I am not sure if this solves your problem, but I am suspecting that this might be due to the 'valid on date' of the condition records created for the relevant duty condition types.
Since it was a recent regulation and VK11 usually defaults current date as the valid date, that condition record may have been valid only from the recent date on which it was created.
Check the date in VK12 (To find the exact selection parameters, check the pricing analysis in the sales order which will display the exact condition record which is being selected as of current date.) Check for the same parameters; change the date to relevant date in the past and recreate the sales order. Hopefully this should solve the issue.
Cheers,
KC -
Problem in Sales Order with specific condition type.
Hello Experts,
I'm facing a problem in sales order creation for a specific condition type.
the actual scenario is as below,
We have created a new condition type for special discount.This condtion type is applicable only for specific sales channels.Also the discount percentage has to fetched from a custom table.
To achieve this I've written a user exit "RV64A999"
In the FM, i've calculated the subtotal and fetched the discount percentage and calculated the discount amount. After implementing this, the SO were been created properly. for all the line items the discount amount was getting calculated properly.
But then I added a condition at the top of code in exit that the calculation for the new condition type should happen only for selected sales channels.
But after adding this condition in code, i'm facing problem. Now when I create/ change any SO, the discount amounts are getting calculated incorrectly. I'm getting discount amount even if the line item subtotal amount is zero (0).
Any help or pointers reagrding this issue will be very helpful and highly appreciated.Hi ..
Check your config. again or debug the routine code with your ABAPer and find the problem area.
-Maharshi -
Rounding off value problem in sales order
Hi All,
This is related to a rounding off value problem in sales order.
The problem is described by an example which is as follows -
Selling Price of Material A = Rs. 176.76
Excise charged = Rs. 21.80
Total Price = Rs.176.76 + Rs.21.80 = Rs. 198.56
On this total Trade Discount (ZDTD) having access sequence,is calculated at the rate of 4% = Rs. 7.94
But the condition base value after the discount is showing Rs.198.60 instead of Rs.198.56
I want the system to reflect the value as Rs.198.56 intact and it should not round up to the nearest value i.e. Rs. 198.60
Why is this happening? Is it possible to reflect the exact value? If yes what is needed to be done?
The commercial round off is activated for the DIFF Condition Type.
Looking forward to some valuable suggestions.
Thanks & Regards
Priyanka MitraHi Ramesh,
Thanks for your suggestion but the problem has been solved by me.
Regards
Priyanka Mitra -
Confirmed quantity in the sales order coming as 3.5 ea
Hi Gurus
The confirmed quantity in the sales order coming as 3.5 ea where the order quantity was 10ea.I checked CUIN for EA the decimal places is given as 0 which is very much correct moreover I checked the material master in additional data I have not find anything abnormal.The order was created by a batch job.Please help.Hai,
The system has concluded that 3.5 EA for the confirmed quantity means the remaining part of the stock are already allocated to some other sales orders.Out of 10 EA only 3.5 EA are in the stock.
You can view through the MD04 and then enter the plant ,material and then check the quantity that are allocated to the various orders.
Please revert for any.
Kalyan -
Problem about sales order stock stock transfer and batch determination
Hi, experts, I get a problem about sales order stock stock transfer and batch determination.The following is the current situation of my system:
In OMCG I assigned search procedure ME0001 to both 311 and 311 E and ticked check batch. After that, I found that if iI need to tranfer unrestricted-use material from storage location 1000 to 2000 with movement type 311, I just need to input * at the field batch, then the system will display all of the available batches. But for the transferring of sales order stock with movement type 311 E, after I input * at the batch field, no batch is displayed and there is also no message from the system.
Can anybody help me? Is there anything else I need to do? Thanks very much.I think my question is not clear, actually I tried 562 E , 411 E and 413 already. all the transaction looking for the sales order but unfortunatly the sales order is deleted from SAP.
-
Need logic for calculate the balance quantity in open sales order
hi all
i need logic to calcuclate the balance quantity in open sales order ,
where i am using VBAK header and VBAP item , and VBFA for document flow tables
i need to have the balance quantity , for the open sales order
especially taking with respect to VBFA-VBTYP_N = M for invoice creation and N for canellation
any one please help methank you but i am clear abt it
will you please anyother way to calucaluate the logic ,
and i need to populate in bukets also for the terms of 5 years
Edited by: sridhar loganathan on Nov 25, 2008 6:43 AM -
Problem with sales order and Service order
Dear Guru's
We have a real problem with sales orders and service orders and how we treat these. For a project that uses a WBS, it's not a problem to manipulate SAP to give us a list of shortages (orders with no or limited supply) for each order, but for some reason our after sales orders and our service orders do not work this way.
Thanks and Regards,
Deethya.CLOSED
-
Manual quantity allocation per sales order
Hi All,
The requirement is as follows.
My client want users to allocate quantity for sales order manually so that they can control quantity allocation for sales orders when there is shortage of stock.
We do not want to use product allocation for this, So can anyone suggest if there is any other way to allocate the stock manually for sales order.
Thanks in advance,
JMHi,
This can be acheived by enhancement.
You can use userexit MV45AFZB -userexit_source_determination for this.
You need to maintain the Z-table for all the bottleneck material with confirmation quatity column.
So everytime when you create a sale order for bottleneck material, system will check this table & irrespective of any order quantity, it will confirm the quantities mentioned in the table.
This way you can maintain the logic & fullfil the above requirement
thank you -
Problem with sales order update from MIGO ( using BADI)
I have written a BADI while doing MIGO, through which I am updating Sales order Order Quanity.
I am able to update the Quantity successfully in sales order, but I am getting following update termination message which is mentioned below.
"Sales Order 376446 has failed an update to the billing date associated to Transaction MIGO
Contact your STC Key user for assistance
PO Number:"
Any clue? Please suggest.
Regards,
Krishna Prasad MVNI have written a BADI while doing MIGO, through which I am updating Sales order Order Quanity.
I am able to update the Quantity successfully in sales order, but I am getting following update termination message which is mentioned below.
"Sales Order 376446 has failed an update to the billing date associated to Transaction MIGO
Contact your STC Key user for assistance
PO Number:"
Any clue? Please suggest.
Regards,
Krishna Prasad MVN
Maybe you are looking for
-
How do I create a session?
In order to use methods like getValidSessions() in the Session class of the SessionAPI for iPlanet Portal Server, I need a Session object. There is no obvious way to construct one based on the javadocs. I can get one from a SessionID object, but in o
-
Having a problem with searching google by right clicking a keywird
whenever I search google by right clicking a keyword, I am redirected to the new tab of google search (It does not happens normally...) and the previous tab from which I have selected the keyword also starts to load the google search results. I have
-
Weird Artifactin​g with Windows Live Messenger
So, I noticed that I get some artifacting with Windows Live Messenger's notifications after restoring my W520 to its factory settings again. I got angry at it and restored it to factory settings again, and it is still present. Yes, I've tried updatin
-
BW query: Quotation - Sales - Billing Overview?
Dear all, We are looking for an overview report which shows the flow from the quotation documents + item, sales documents + item and the Billing documents + item. In this flow we would like to see the document numbers themselves, the throughput times
-
Defining the Fields for Manual Entries in Conditions Type
Dear Team, I want to define new fields in the Option Manual Entries in Condition Type eg PR00 . Can you tell me the Setting where do we define those settings and where are they control. Thanks, Prashant